Home Article Wood Paint Remover Dryer
Article

Wood Paint Remover Dryer

How you can remove old paint from wood?

When renovating wooden rooms, the main challenge is how to remove old paint from wood. Removing this substance from concrete or metal surfaces is not too difficult, but removing paint from wood is a little more difficult, t. к. it is a soft material that can easily be damaged. When working with wood, gloves must be worn to avoid splinters in the palms of your hands, and a respirator to avoid inhaling sawdust and paint particles.

wood, paint, remover, dryer

How to remove old paint from different materials

Beginning to repair, major or cosmetic, many are faced with the same problem. the old paint, which must be cleaned. The task of cleaning old paint must be approached with extreme care so as not to damage the painted surface. In this case, the method of its removal may vary depending on the surface material. Consider the basic nuances of how to remove old paint from the surface without the risk of damaging it.

wood, paint, remover, dryer

Nozzles. the necessary equipment for quality work

One of the most important tasks of installing the right nozzle. You should choose the nozzle according to the job you want to do.

If you have started a repair at home, and you need to remove paint from doors, window frames or other wooden surfaces, the household construction dryer will be a good helper. The household device always comes with 3 of the most essential attachments for the job. It is convenient, and the rest can be purchased.

But the professional models are very rarely equipped with nozzles. But to choose it is not a problem, since the Internet always have a large assortment of additional attachments for hair dryers class pro. They can be used to change the strength and shape of the air flow, to make it targeted or, conversely, scattered.

wood, paint, remover, dryer

The most popular nozzles for technical hair dryers:

  • round shaped guide: used in work with copper pipes for soldering;
  • Focusing flat form: used to remove paint from wood;
  • protective nozzle for working with glass or fragile material: with which you can remove varnish or paint;
  • Cutting: used to cut decorative elements on the surface;
  • welding: work with synthetic welding cable;
  • Reflective: designed to heat plastic pipes, causing them to deform into the desired shape;
  • welding mirror: used for working with plastics.

In this article, we will look at ways that have helped thousands of people around the world resolve this issue.

For clarity, we have divided the methods into three categories:

Buying specialized chemicals

Why do we put this method in the first place?? Because it is, according to the experience of practitioners and manufacturers themselves, helps to solve the problem faster and easier what.

Think about it, what is better, to work with a spatula on several tens of square meters or to apply a specialized substance that has been created to solve these problems?

See also  How to paint a gas pipe in the apartment

The result may be the same, but how much time you take to solve it often plays a crucial role.

Modern chemicals have become available to a wide range of consumers, and do not require a large expenditure.

Even the toughest old paint can be removed in a few minutes.

That’s why chemical agents rank first in terms of effectiveness.

Heat treatment

Another effective method. It does not require you to spend money, but you will need a construction hair dryer.

If you have it at your disposal, you can get down to business.

Choose the area with the paint you want to remove and turn on the construction dryer.

After a while, under the influence of high temperature, the paint will start to heat up a lot and lose its properties.

At this point, you need to take a spatula and begin to gently remove the old layer.

How to Strip Paint from Wooden Furniture

If you see that it is hard to remove, it is best to heat the wooden surface a little more, perhaps the paint has not yet softened enough under the influence of heat.

How to: Strip paint like a Pro. 4 different ways to strip paint off of wood.

But how do you get rid of old paint if you don’t have a construction dryer??

The mechanical method

In fact, to cope with the old paint on the wood will help even the classic scraper.

But it is best if you have at hand an angle grinder or a rotary sander with a special attachment, then you can cope with your task faster.

Be careful, the wood can easily be damaged in the removal process.

This is especially true for rooms with high humidity. After a few years wood in high humidity areas can get very wet, you can damage it even with a squeegee.

Therefore, it is best to solve the question “how to remove old paint from wood” with the purchase of specialized chemicals.

It saves you effort and protects the wood from damage by other methods.

Remove old paint from the door with a hair dryer

Sometimes it is necessary to remove the old paint from the door in order to give it a fresh look with a new coating color. The door can be wooden or iron, entrance and interior, and at the same time over the years of use has been painted more than once, and even different composition of coatings.

There are several ways to remove old, blistered or cracked paint from a surface:

The best and fastest method to remove paint! Wagner Furno 750

The first two methods are not really suitable for indoor work, especially if you can not remove the door for a while and work outdoors.

The third way to remove old paint from the door is more optimal, because there is almost no smell compared to the heating of the paint with a hair dryer, and the dust that tends to fly in different directions, when removing with brushes and power tools.

It is worth noting that cleaning with metal nozzles (brushes) on the angle grinder or drill, requires careful control nag and suitable for working with metal surfaces.

When you remove old paint from the wooden surface with a metal brush, the possibility of damaging it, making grooves and recesses is practically 100%. Which will ultimately affect its appearance and will only add extra work to puttying, sanding and leveling the plane of the door.

See also  How to make curls with a blow dryer with a diffuser

If it is not possible to dismantle the old door, you can try the following method, which guided the removal of paint from the door.

First of all, purchase a special wood paint remover. According to the instructions applied it to the door, but the result was weak. The reason was the abundance of varnish and paint coats that were used on the wood of the door.

Then I used a putty knife and a heat gun, which I had also bought specially for this purpose. Its cost is low, and the speed of cleaning has increased many times.

There are several recommendations for working with a heat gun when removing old paint from a wooden door, as well as safety techniques that are important to follow.

The main recommendations are:

  • Safety Precautions Be sure to use safety glasses, and follow the recommendations in the manual for your tool.
  • Spatula should not be too soft and wide. Using a soft spatula I had to wait a long time until it could pick up the paint. After several minutes of unsuccessful attempts, it was decided to use my grandfather’s old trowel. It did a great job.
  • The force of pressure and the angle of the trowel oddly enough, but it also played a role.

By overdoing the force of the trowel, it was easy enough to damage the surface of the wood, picking up the old paint and wood fibers along the way.

But in my case it is not so terrible, since this door of the utility room on the summer cottage. It is many years old, and as it turned out, the door already had a lot of cracks, dents and other things

I had to use putty in the end.

Getting the angle right (about 25-30%) was half the battle, because it took off a longer layer of paint at a time, which also speeded up the process.

You will be able to find the best distance yourself, depending on the power of the heat gun and the weather conditions, such as wind (if the work is done outdoors).

Note how soon the old paint layer begins to swell. Once you notice the difference, you will realize that this is the required distance.

Do not keep a construction hair dryer in one place for too long. Progressive motions in the direction of removing the old paint from the door, will be most effective. The paint comes off with tapes.

After completing the removal of paint from the door and puttying defects, the final step was the processing of sandpaper.

If resin from the wood pores protrudes on the surface and it clogs the abrasive, you can use acetone and a rag. After removing the tar stains, sanding will become much easier.

A few words about the heat gun I bought.

In addition to working on the old door, he survived a fall from a stepladder and cleaning paint off the windows, also wooden.

  • The plastic should not be prickly, it can be felt by the ringing sound when tapping on the housing, as well as its glossiness. Yes, and the weight makes itself felt, it can not be light;
  • The modes are at least two speeds;
  • The wire should be at least 2 meters and in a thick braid with a strong plug.
See also  How to make an artificial fireplace in an apartment

Do not forget to clean dust off the surface of the door before painting. Successful work in removing old paint from doors or any other surface!

Paint removal with a construction hair dryer. the most popular method

A construction hair dryer can be used for removing paint as well as for removing old coatings from ceilings, walls, windows, doors. It can also be used for resurfacing plastic, linoleum, roofing felt.

The scope of application of an industrial hair dryer is so wide that it can be used almost everywhere where it is necessary to heat a surface. So what’s good about a construction hair dryer?

How to clean pipes chemically?

Docker S4

The paint stripping chemical is applied to the surface with a brush. A good example of such a chemical agent is DOCKER S4 (manufacturer: Docker Chemical GmbH Rus) which can effectively wash out all kinds of paints without damaging metal and plastic pipes.)

10-15 minutes after the application of the DOCKER washout the paint is scraped off with a putty knife or sharp chisel, cleaned if necessary with a metal sandpaper, and then the surface of the pipe is wiped with a cloth soaked in solvent.

Decapant gel express

DECAPANT GEL EXPRESS is a universal paint-remover chemical compound and can be used for removing overdue paint, varnish, plaster, mastic, glue (except for two-component coatings) from all types of surfaces, including wooden, glass, metal, cement, and ceramic tiles. This gel-type of product does not cause blackening of wood, does not drip when applied to vertical surfaces. The layer of paint is applied with a brush to the surface to be cleaned and cured for at most 30 minutes, the broken and softened old coatings are removed with a scraper and the surface is washed with warm water using a stiff synthetic brush.

Large metal surfaces can be cleaned by wet sanding: the surface is moistened with water and the worn-out layer is removed with a water-resistant emery cloth.

Hair dryer for removing paint from wood

Technical, or construction hair dryer is not the last place in the toolkit of the home craftsman. With a hair dryer, you can easily remove old paint, dry surfaces, defrost water in the pipeline, give plastic parts the desired shape. Hair dryer is indispensable for laying roofing felt with a hair dryer can cut the roofing, heat, or melt it. A hair dryer is used when installing heat shrink insulation, welding linoleum, or soldering tin or silver.

If much desire, you can make a technical hair dryer with their own hands, but the problem may arise at the first stage of what to make a reliable and safe housing. If there is a sufficient selection of hairdryers on the market, it is better to buy a ready-made hairdryer.

Preparing the tools

Prepare your tools in advance. To remove you will need:

  • a trowel or scraper;
  • Industrial hair dryer with temperature control;
  • Drill or drill with interchangeable tips;
  • Angle grinder or grinder;
  • chemical cleaner;
  • a rag to wipe off excess paint;
  • A respirator, gloves, and goggles.

Author

Kerariel

| Denial of responsibility | Contacts |RSS