You can use dishwashing liquid to clean the device of any dirt. Abrasive powders and metal sponges can cause scratches and other imperfections on the surface of the scale. It is also forbidden to wash the tool by immersing it in water. to the menu
Store the scale horizontally. Do not place different objects on them, as this can affect the readings. If you do not intend to use the device for a long time, you should remove the batteries. Floor scales in this case will not show the LO icon, as the battery simply does not have time to discharge. to the menu
If electronic floor scales show different weights, the device is probably broken. You can determine the type of failure by certain signs:
No data on the display. the most likely cause is a lack of continuous power. Simply put, the batteries are dead. Batteries have to be removed and replaced with new ones. Often such a problem comes in the form of an error on the display, so it is not difficult to troubleshoot. How to independently replace the batteries in the floor scales, read our article.
The main problem that arises when using electronic scales is that the device shows different body weight.
By what criteria to choose accurate floor scales, read our article.
Why Does Music Only Use 12 Different Notes?
Reasons why an electronic scale shows the wrong weight
Why the display may show different weights:
- Underneath the device is an uneven surface. Electronic models are very sensitive devices, so if they wobble when standing on them, it means that the surface under them is uneven, and you should look for another place for them in the apartment;
- Clogging. If the device is used for a long time and stored without a box on the floor, it could be trivially clogged. It is necessary to disassemble it and carefully clean all the elements with a brush with soft bristles;
- Malfunction. This problem may be caused by weighing irregularities. Recommendations that should be followed when weighing are listed below.
Possible breakdowns of electronic scales
If the floor scales are operated correctly and the result is different each time, it is very likely to be broken. You can make a preliminary diagnosis of failure by the following signs.
Scales don’t turn on, no information appears on screen. This may indicate that the device is not powered, that is, its power supply unit (battery) is dead. Simply replace the batteries with new ones. In advanced models a dead battery gives a certain error code.
All About Scale Numbers
Rules for care and operation
To extend the life of the scale, follow these rules
For more accurate weighing results place the weighing mechanism only on a flat surface. The scale should be measured in the same steady place. Otherwise the scales will lie. Feet on the scale should be placed parallel to one another so that the center of gravity is evenly distributed across the entire surface. Avoid excessive movements and stooping when standing. Otherwise the scale gives wrong weight.
A very common question: “Can scales show different values if operated incorrectly?”. Yes they can, the conditions under which the device is stored and used are important.
If floor scales lie, the main reasons are:
- Uneven surface;
- The person is not standing correctly. the feet on the scale should be parallel to each other;
- Clogging of the inside;
- Thinning of the contact ends of the gear mechanism has occurred;
- Magnetic field may have had a strong effect on the sensors;
- Failure in calibration setting.
Very important! Avoid sudden changes in ambient temperature when in use. Scales should never be placed close to heaters. Also, the components should not be cleaned with chemically aggressive substances.
What to do if the floor scales display the wrong weight? Calibration settings may have malfunctioned. Tare the floor scales according to the instructions. Models sometimes have an automatic calibration feature.
The easiest way to do the calibration:
- Set the reference weight on the work surface;
- Press the power button until “PASS” appears;
- When the process is completed, the operation mode will be restored by itself.
If the scale shows the wrong weight even after calibration, what to do? In this case it is necessary to check the accuracy of the readings. To do this, weigh yourself several times in a row and record the results. Then determine the difference between the highest and lowest values. If the deviation is within 200 grams, this is considered normal.
It is very important to! It is not necessary to check the operation with different foreign objects such as: dumbbells, bags, canisters, etc.п. Because the device is designed to work with the parameters of a person, and when you measure the weight of other objects is not complete distribution of pressure on the platform and gets an error. Also this way you can break the device. This is why floor scales can often give incorrect results.
In the process of determining body weight it is important to stand correctly. After all, the result depends on what part of the foot may be under more pressure. If the force of the load is more on the fingers, the weight indicator will be lower, and if the pressure is more on the heels, then the weight in this case will increase slightly. This explains very well why the electronic scales show different numbers
When the word “error” appears. In this case, try to change the power supply and carry out the calibration. It also means that a malfunction has occurred.
Then wait a few minutes until the display shows zero readings. If these actions did not bring the desired result, then the problem is in the touch sensors, they are most likely out of order. Then you need to buy a new device, because replacing the sensors is not justified financially, and in many cases repairs are simply impossible.
Why electronic scales show different weights: cheating everywhere
Favourite readers World Access! We are grateful for each and every one that you send to the development of our startup! All the money goes to pay our authors, our proofreader and hosting fees. We wish to please you in the future! Thanks to you, our project continues to be independent and useful. Without your donations, we would have never made it! Thank you and thank you very much!
Sincerely, Editor in Chief Access World
Electronic floor scales have become very popular lately and can be found in almost every family looking after their health. If you measure your weight on a daily basis, you can track unwanted weight fluctuations and take appropriate measures on time
Weigh yourself at the same time of day, experts recommend this approach allows you to determine the exact weight changes.
If weighed at different times of the day you may notice slight upward or downward deviations. Thus, a person is always a little lighter in the morning than in the evening. a normal phenomenon, since it is associated with physiological processes of the body. But if you stand on the scale several times in a row and the scale reading is completely different this is a reason to think about the correctness of measurement.
Before answering why electronic scales show different weights it should be noted that the scales for determining the weight of the body are of two kinds: electronic and mechanical. It is the scales of the mechanical type that give the largest error.
the error of mechanical scales may vary within 1 kilogram always manufacturers warn about this in the instruction manual of the device. Electronic scales have a similar principle of measurement to the mechanical scales. It is the electronic scales that are considered the most accurate they measure to the grams
On mechanical scales, because of the specific markings, it can be difficult to determine the exact number of grams this leads to a decrease in accuracy of within 500 grams. In cheap and simple models of scales the weighing results depend on the work of built-in measuring spring.
Advanced models have a voltage sensor as soon as a person stands on the scale, the sensor stretches and causes an electrical signal which appears on the display as numbers or other information
Today smart scales, which can show fat, muscle, water content in the body, are also actively included in our life.
Possible malfunctions of electronic scales
When the electronics of the balance constantly shows different results, the reason may be the breakage of the device. There are several types of electronic scales failure.
The answer why the electronic scales show different weights may be the battery The batteries in the scale should be changed regularly, since this device is sensitive to power.
The reason of inaccurate measurements of electronic scales may be hidden in the dead batteries, especially if the display of the device does not show the data or the figures look strange.
The electronic scale’s stub is damaged
If the loop is faulty, they will not show accurate data. This cable connects the board and the display of the device. If the loop connector does not fit snugly the scale display may not show at all or may be inaccurate. The problem can be eliminated as follows: you should slightly lift the board and press it firmly against the display of the scale.
Thinning or breaking of contacts of the scales
In case of thinning, breaking or other damage of the contact stubs the electronic scale may also show different weight. Sometimes the differences can be significant from 1 to 10 kilograms. In this case it is necessary to replace the relay of the device and the question why the electronic scales show different weight will be solved.
Water entering the scale
When water or small debris gets inside the body of the scale, measurements may become less accurate, especially since electronic scales are almost always on the floor. In cases of water damage the display of the scale may not show anything at all. It is necessary to dismantle the scale and carefully clean dust and debris from the internal construction of the scale.
Weigher improper calibration
It is necessary to read the instructions to the electronic scales so that they show an accurate measurement. Some scales adjust themselves simply by placing them on the floor. Some electronic scales can only be adjusted and calibrated manually.
Weighing scale electronics malfunctions
Errors in electronic scales may occur during improper operation of the instrument or shocks. The most common problem of electronic scales during weighing they show completely different results.
Incorrect operation of the device can lead to errors and inaccuracies in the measurement of weight. Carefully read the instructions to the electronic scale before using it.
What to consider when weighing on an electronic scale
level and stable base if the scale is placed on an uneven surface and wobbles move it to a flat surface. The problem why electronic scales show different weight is most often solved this way.
It is important to stand on the scales correctly feet and legs should be placed flat, stand in the same place when weighing. Standing on the scale must be straight and must not tilt the body or shift the center of gravity. If you stand on your heels, the scale will show less weight, but if you raise your toes it will show more weight
the temperature of the room where the scale stands must be constant. The scales may malfunction or show incorrect results if there are sudden changes in temperature or humidity.
Electronic scales should not be stored near a radiator or electric heating devices
It is not recommended to wash the scale under running water or clean it with chemicals. It is worth remembering that the electronic devices should treat with extreme care and caution, carefully read the instructions for use and then the problem of why the electronic scales show different weights you will not affect.
Something is broken or not working? Tell us about your problem with TV, smartphone, app or other device and we will solve it write your question in the Комментарии и мнения владельцев of this article, or on e-mail email@example.com we will definitely answer your question and solve it within one week. For our regular readers we will soon carry out a blitz with unusual prizes follow the site every day.
I liked the article? Support our IT-magazine in any way you like! So far we operate on pure enthusiasm, but we do not do custom reviews 🙂
Measuring every day
Measuring daily is not a good idea because the number of weight checks affects everyone’s psyche. A change of a few kilos is quite normal and acceptable in one day. Constant weight fluctuations, which is a natural process, contribute greatly to the increased production of cortisol, a stress hormone that affects sugar and fat absorption processes.
Why electronic scales show different weights
and more people are watching their bodies. As a consequence, floor scales are increasingly in demand. Mechanical devices are a thing of the past, electronic scales have replaced them. They are easy to use, accurate in their readings and affordable. However, those who use electronic scales often encounter a problem: they periodically show different values. There can be several reasons why electronic scales show different weights. Let’s talk more about them.
Why does the scale give me different weights | Easy trick to fix this
Why the display may show different weights:
- Uneven surface under the device. Electronic models are among the very sensitive devices, so if they wobble when you stand on them, it means the surface beneath them is uneven, and you should look for another place for them in the apartment;
- Clogging Formation. If the instrument has been in use for a long time and is stored unboxed on the floor, it could be trivially clogged. You need to disassemble it and gently clean all the elements with a soft-bristle brush;
- Failure in operation. This problem can be caused by a violation of the weighing rules. Recommendations to follow when weighing are as follows.