TOP 10 best kitchen hoods 50 cm according to customer reviews
Few people will like to constantly hear the extraneous smells that are heard when frying or baking. To minimize the contamination of the finish, save the kitchen from the smell of cutlets or soup, use the hood. It does not take up much space, is easily mounted, it costs inexpensively. The main thing is to determine the dimensions, installation location, type. Having studied many user reviews and analyzing the opinions of experts, I compiled my rating of the best kitchen hoods of 2022 50 cm wide.
- The choice of optimal performance
- Operational parameters
- Hood for a kitchen 50 cm: consumer choice
- TOP-3 built-in hoods 50 cm
- Elikor Intera 50
- Krona Kamilla Slim 1m 500 White
- Jetair Aurora LX/Wh/F/50
- TOP-4 fireplaces 50 cm
- Elikor Epsilon 50
- Krona Bella 500 White
- Lex Mini 500
- Maunfeld Tower C 50
- TOP-3 suspended hoods 50 cm
- Hansa OSC 5111 WH
- Elikor Davoline 50
- GEFEST in2501 K47
Do you need an extract in the kitchen with an electric stove
Many acquiring an electric stove, they ask a question whether an extract is needed? A fairly frequent misconception about the lifting of the hood when using an electric or induction stove. Indeed, electric plates do not release carbon monoxide as gas, this is their main plus. But the smells when cooking on an electric stove are the same as the presence of burning when frying dishes. The smell of food throughout the apartment is not the most pleasant moment. Therefore, we answer with confidence. you need to approach the choice of hoods for an electric stove if you had a gas stove.
The form can be distinguished by the following types of hoods into the kitchen: flat suspension, built.in and dome.
RANGE HOOD: Three Things to Consider in Installation (Featuring Hamden Range Hood)
The most common species is suspended. Such devices are cheaper than other models, their installation is not difficult and does not require the participation of a specialist. Such a device is located above the hob, and above it you can still place a cabinet, since a flat model does not require installation for a ventilation channel. Air purpites of this type sometimes look bulky in the interior, however, with a competent selection, both classic elements and notes of modern design will support. The flat model is equipped with interchangeable filters, which for effective work is better to change in a timely manner.
The built.in technique is installed in a special cabinet and is almost invisible, only the exhaust surface itself is visible outside. These hoods into the kitchen are equipped with an air duct included in the ventilation channel: it is outside the cabinet doors. Many built.in models are equipped with a retractable panel, which allows you to increase the working surface of the device, folded in a folded size. These units have low noise level, laconic design, which allows you to remain invisible in the interior of both retro and modern.
Dome.made exhaust devices are the most fashionable and interesting option. There are designer models that will take a central place in the kitchen interior. They resemble a fireplace chimney: a thick channel and a dome, so they will fit perfectly into classic styles or retro. These air cleaners are most diverse in terms of design. White, black or colored, glass, metal or wooden, retro or high-tech-modern design ideas allow you to choose the perfect device that will meet the most demanding taste. Exposite devices of such retro design are popular in country houses.
Sometimes they are attributed to domed ones, and sometimes such types of kitchen hoods as an island air cleaner and an extract with glass are distinguished separately.
Located in the middle of the room, attached to the ceiling above the stove. Such interesting installation is used in the interior where the working area is made in the form of an island. The round shape looks especially interesting, the surface can be both flat and with a bend. Such types of devices are suitable for a retroder.design room in the style of culinary television shows.
The hood with glass (modern) is designed to perform not only its main function, but also serves as a design element in the interior. In such devices, the backlight looks especially interesting, especially if the hood with the glass is not easy to transparent, and white, black or, for example, smoky. Glass species of hoods are not suitable for retro interior, as they look supernatural.
How to choose an hood for a kitchen
Inclined, dome or telescopic hood. the choice depends on your preferences and dimensions of the kitchen. For example, dome and island hoods look good and function perfectly in a large kitchen. If you are limited in square meters, you should take a closer look at the built.in models. Telescopic hood is a good option for a small.sized apartment. You will receive a well.working device that will not occupy excess space when you do not cook anything. Where it is better to pay attention to the ratio of the size of the hood and stove. You need to buy a kitchen hood so that its dimensions are at least matching, or better. there were more in area than the area of the hob. Given that the plates have a standard width of 60 or 90 cm, you should not purchase an extract of 60 cm. it will obviously ineffective. As for the height of the installation, above the electric stoves, the hood for the kitchen must be mounted at a height of 65. 75 cm from the surface. For gas plates, this distance is 10 cm larger.
Type of installation
Kitchen hoods can be attached differently above the hob. There are several methods of installation:
We tell you how to choose the right hood for the kitchen according to the main parameters.
Type of exhaust device
Which hood is better to choose for the kitchen based on the type? To do this, take into account the features of the kitchen room. For large areas and combined kitchen-living rooms, it is optimal to choose running models, since due to their design features they give out greater power. In addition, some models are able to work in circulation mode, that is, to supply fresh air from the street.
Recirculation systems have less performance. They are optimal for small rooms and rooms where there are no ventilation shafts. Sometimes such devices are chosen where the distance from the ventilation to the hood is very large. In order not to pull the duct, they put a good recirculation unit.
If you are looking for how to choose a built.in hood for the kitchen, then the decorative function of the device will be important. Built.in can be located completely imperceptibly. Those who do not want to mess with embedding select the simplest suspended structures. But exhaust equipment can also become an interior decoration. Such, for example, dome models of various performance. An interesting hoods that have appeared relatively recently, which are better to hang over kitchens-fasteners.
For effective operation, it is necessary that it is proportionate to the stove. This means that in width it should be equal or more than the hob. The depth is of less value and varies from 0.3 to 0.5 m. It must be remembered that if it is too large, a person will touch the design of the head.
For the dome apparatus, the distance between the ventilation and the lower plane of the umbrella is important. Optimal dimensions from 0.7 to 1.5 m. When choosing a device, you need to take into account the height at which it will be fixed. According to the safety rules, the distance from the gas stove to the hood should be at least 0.75-0.85 m, from the electric-0.65-0.75 m.
The dimensions of the exhaust umbrella in the plan should be no less than the size of the hob is, of course, in the ideal version. If the exhaust umbrella completely “covers” the hob, then almost all of the contaminated air (highly heated) rises up and enters the hood. If you block the hob in the plan (it is too large), it makes sense to install two hoods with separate umbrellas or use an additional mini-exhaust, built directly into the countertop.
Another important element in solving the issue of which hood to choose in the kitchen is the filter system. A fat filter is necessarily present in a device of any type. It can be made of non.woven material, then it is replaced as it is contaminated, or from a metal mesh. In the latter case, the element is washed from time to time. Some manufacturing companies for the best result put both types of filters on their products.
In all recirculation devices and in part of the flowing, coal filter elements are also installed. In the process of air purification, they absorb small particles of contaminants and smells. After a certain time, they require replacement. With contaminated filters, the effectiveness of air purification falls to zero. It is more convenient in this regard to the hoods with electronic controls in which the sensor of the level of pollution of the filters can be provided. Such an extract independently reminds the owners that it’s time to clean or change filters.
There is mechanical or electronic control. In the first case, buttons, switches on the panel help to use.
And in the electronic model there is a display and programs are available, additional. functions (automatic shutdown, reminder of the cleaning of the filter, etc.). This, of course, increases the price of the device.
Select the type of installation
The simplest and most affordable hood. Only one method is mounted. console to the wall. Usually the suspended hood is not distinguished by a giant weight and a large thickness.
Inexpensive suspended hoods are a box the size of a large “diplomat”, which is attached to the wall, and control is located in place of the handle and locks.
For example, Maunfeld MPA 60. At a price of up to 4000, a rather light and powerful apparatus. In the presence of a penetrator in the house and straight hands, the installation will not be difficult.
There are more dimensional in height and sophisticated in design suspended hoods. For example, inclined. Representative. Weissgauff Tally 60 TC WH.
Built into the cabinet
A good solution to integrate hood into a kitchen cabinet located above the stove. The design in this case is not important, only the control panel is visible outside.
Built.in hoods can have a telescopic structure. This can be a salvation with insufficient depth of the cabinet.
The main advantage in the invisibility and the absence of wires sticking out. the entire electrician during installation is hidden inside the cabinet.
Elikor Integra 45. a similar device with a telescopic fence.
Dome or fireplace hoods
They are both parietal. Hansa OKC 611R and corner. Kuppersberg Anabel 65 WM O. or is the island. Faber Tratto Isola/SP EV8 X/V A90.
Used in large kitchens. there is where to place a rather large design.They work more efficiently due to the larger area of air fence and fan power.
Dome hoods with good ventilation can work on a passive mode, without a fan.
Which hood is better: the most silent options
And if the buyer is looking for which hoods are the most silent, then the information posted below will be useful.
One of the most expensive but reliable options is ASKO CW4924B. Given the fact that the price is the only drawback, a number of advantages include noiselessness, designed to the smallest detail, the presence of a timer, 4 speeds, a filter that can be washed in a dishwasher, a powerful backlight and a high degree of efficiency. This is the best solution to what hood is needed for any kitchen.
The only thing that is not suitable for all customers is a size that is 90 cm.
Alternative and cheaper model. Hansa Oks 6726 IH. If you ask the question of which inclined hood is better, you should definitely pay attention to this. The peculiarity of this option is the filter pollution indicator. This is also attached to this, a large number of additional functions, backlight, timer. The negative aspects include the fact that the lamps often overheat.
Independent installation of kitchen hoods
The tips of professionals will tell you how to correctly install an electrical appliance above the hob so that it functions effectively and for as long as possible.
So, special attention should be paid primarily to the height of the placement of the device relative to the stove. When it is fixed high, it is not worth expected fruitful work, which means one thing. all couples, extraneous smells from cooking will remain indoors. In the opposite case, the hood will complicate the cooking process.
The perfect solution is to withstand the height above the hob 75–80 centimeters.
Another important nuance that will affect the productivity of the device is its remoteness from the air vent mine. The closer it will be, the smaller the number of pieces of corrugated pipe, connecting knees will be required, this will increase the strength of the hood, lower the noise.
Having ensured reliable connection of the hood to the input hole of the mine, you need to take care of its overlap. A valve and a lattice will be required for this.
Advice! The diameter should choose a duct of more than the outlet of the electrical opening, which will significantly lower the load on the electric motor, will allow you to perform the work more efficiently and with a low level of noise.
TOP-5: the best built-in hoods
Built.in hoods are very popular among buyers. Their main advantage is compactness. due to the concept of installation in a kitchen cabinet or wall, the device is less noticeable, which means that it has more chances to fit into the interior, regardless of its style. In addition, such hoods are usually almost silent. However, the variety of models in the market can easily confuse. Below is a rating that will help to orientate and decide on the choice of the best built.in hood.
How to Choose the Right Range Hood
Weissgauff Fiona 60 x
Weissgauff Fiona 60 x
The fifth position in the rating of built.in hoods is occupied by an extract from the domestic manufacturer. The model is characterized by an incredible power of 850 m 3 /h. with a norm for a standard kitchen, with parameters of 10 kV. m and 2.7 m, 300 m 3 /h. Completely built into the kitchen cabinet. It can work both in the removal mode and air circulation, which is also an undoubted advantage. Mechanical control, button, at disposal 3 speed modes. Among other features of the hood, it is worth paying attention to the anti.breeding valve. it does not allow air to enter the room when the device is turned off.
- Type: built.in (in the cabinet)
- Design: full.line
- Principle of work: Division / recirculation
- Productivity: 850 m³/h
- Noise level: 49 dB
- Speed: 3
- Engines: 1 (80 watts)
- Fatty filter: aluminum
- Management: buttons
- Dimensions (ShHG): 52.50×29.10 cm
- Minimum height: 13.8 cm
- Diameter of the duct pipe: 120 mm
Exhaust Weissgauff Fiona 60 x
In the fourth place in the ranking is a built.in hood from the Italian brand De’longhi. Inferior to the previous model in terms of discharge performance. here it is only 300 m 3 /h. However, similarly to the first extract from Weissgauff, it copes with the removal of air and concomitant odors, and with air exchange. The engine is only one, and the filter is only fat. it protects the engine from the smallest particles of fat settling on the engine during cooking. There are only two speed modes, which for some may be a minus. The case of the product is made of metal, due to which the model looks especially stylish.
- Type: built.in wall
- Design: full.line
- Principle of work: Division / recirculation
- Productivity: 650 m³/h
- Noise level: 52 dB
- Speed: 3
- Engines: 1
- Fatty filter: metal
- Management: buttons
- Dimensions (ShHG): 51×26.2 cm
- Minimum height: 17 cm
- Diameter of the duct pipe: 120 mm
Exhaust De’longhi KT-A 500 BF