To what malfunctions can lead overloading
When the drum of the washing machine is overloaded with things, it rotates with strain, skips turns, or does not rotate at all. If you regularly load more laundry in the machine than the manufacturer has provided, over time, there is a high risk of serious problems in the operation of the unit:
- Bearing failure, which will require replacement;
- The formation of increased pressure on the hatch door, due to which the cuff is deformed and water leaks during washing and rinsing;
- drive belt breakage (will also need to be replaced).
In addition, overloading the washing machine, along with improper loading of laundry (for example, a large number of heavy items. towels, duvet covers), can lead to imbalance in the washing machine when wringing the laundry. The reason is that the items accumulate on one side of the drum, so the equipment begins to vibrate and make a lot of noise, and if there is an imbalance sensor, it will stop without completing the spin cycle.
Thin linen and lace
Can I put lace in the machine?? A piece of fine fabric, such as chiffon or gas, or lace is washed in the machine, but only on a hand wash. These items are very capricious and easily torn, so be sure to turn off the spin. Very delicate items are loaded with only two or three loads per wash. It is desirable to use liquid detergent for washing, and in a minimal amount.
The optimal water temperature for washing fine and lacy fabrics is 30 degrees.
Washing machines are complicated appliances, but they are also frugal(water, light, time) durable and sturdy. They have to do their job regularly with precision. Many people really appreciate this technique and try to use it correctly. However, there is one problem that many people are unfamiliar with.
Overloading is a problem that you can create without noticing it. Misguided you may easily think that your washing machine has a lot of room, but it may not be that roomy.
So let’s take a look at overloading, find out what it is, why it’s so harmful, and how you can help prevent it. No matter what type of washing machine you have, this is a problem that can always occur, so read on to learn more.
Overloading. Is when you put too many clothes in your washing machine, thereby exceeding the weight limit. It’s perfectly possible to overload your washer and stay within the weight limit, so the two issues are not as closely related as you think.
Overloading your washing machine basically means that you have placed too many clothes in the drum, so that when the washing machine rotates, it has no freedom of movement of water masses, which with the intense movement should effectively clean the contents. This may seem like an understandable problem, but many people overload their washing machines daily without even realizing it.
Overloading your washing machine is bad for a number of reasons, to better explain why let’s look at three main things. A washing machine needs warm water, a moving drum, and finally detergent to wash clothes well.
Water temperature will loosen dirt and stains, and this will activate the cleaning properties of any detergents you use. The movement of your washing machine. Is what shakes the particles and helps scrub away the dirt. Detergent. This is what actually helps to get through the stains, and dissolve them.
Now, as you can probably guess, an overloaded washing machine affects all three of these areas in one way or another. The main part of washing is movement, but when movement is difficult and there is no free space for the water masses to get in and move, then what kind of washing are we talking about?
This means that your clothes will not wash properly, and they are often left with white streaks from the powder and poorly washed. So, as you can see, overloading your washing machine may not seem like such a big problem, but it can cause a lot of inconvenience. So, let’s see what you can do to fix it?
If you want to wash large items such as blankets pastels, you have to load them separately.
You should also make sure that there is a 10 cm clearance around the drum of the washing machine, so your clothes have the movement needed to effectively rotate the washing machine. And while weight is an important issue, you should also consider volume. It is true that weight is not always a great measurement to use when it comes to overloading, but you should still consider it.
So, that’s all you need to know when it comes to overloading your washing machine. But repeatedly overloading the cycles can cause a lot of problems and can even cause serious damage to your washing machine, and you may need the help of a qualified technician. So make sure that you always calculate the volume and weight of your load.
Housewives are often unwittingly responsible for malfunctions themselves. Didn’t read the manual carefully, didn’t learn enough about the specifics of each program. and here’s your favorite washer simply hangs in the middle of a cycle! If the cause of failure really lies in improper operation, the machine can be resuscitated on its own.
Failure to load the washing machine, overloading by weight
The most common reason for a washing machine to stop when it is running is overloading. The desire to save time, water and electricity makes some housewives put a huge number of things in the drum. You can “cheat” the machine by adding a few thin shirts to the already loaded 4-5 kg of laundry. In such a situation, the laundry is simply badly washed. But sometimes the weight of the laundry exceeds the allowable by several times!
If the machine is overloaded, this is detected at the beginning of the cycle. In modern models, there are special sensors that immediately detect the weight of the laundry and in case of overloading give an audible signal. In machines of previous generations, the drum spins very slowly, as if through force. And soon the washing machine stops altogether during the washing.
To solve the problem of overloading is simple. it is necessary to remove a few things and restart the cycle. In future, you should not fill the drum more than 2/3 full. You can also use a household belt for weighing dirty laundry.
Incorrect program selection
The machine may stop during washing in delicate modes. the drum may appear to be half-full of water. A familiar situation? Do not panic, try to open the door or randomly press the buttons. It is most likely that the delicate or manual mode you are using simply does not provide a spin. If this is the case, you need to set the drum to drain and if necessary, to spin it yourself.
Unbalance
Another cause of an abnormal stop of the machine is an uneven distribution of things in the drum. This may be the case with linen. it absorbs all the water and clumps in the bottom of the drum, thus preventing it from completing a full turn. The situation can occur not only during the main wash, but also during the spin cycle. Often a muffled knocking or vibration precedes the stop.
What to do in such a situation? It is necessary to open the loading hatch and distribute the items evenly in the drum by hands. Continue washing in the preset mode after one minute.
Unbalance of things can happen while washing a down jacket or bulky bologna pants. The filler collects water at the bottom of the drum, and the machine stops working. In this situation it is worth using the tried and tested folk method. wash the down jacket with tennis balls.
Experiment. Overfilled and Overloaded. Washing Machine
Malfunction in program control
The washing machine may also shut down due to program failures. For example, if the washing process consists of several steps. When the soak and main wash modes are set, the smart appliance will stop after the first wash. The second part of the wash will have to be set anew.
Sometimes the technique can hang up for no apparent reason. This should also be considered a software failure. In this case, it must simply be reset:
- press the disconnect button, wait a minute and restart the machine;
- if disconnecting from the button does not save the situation, it is necessary to unplug the machine;
- after a few minutes the machine is switched on and the cycle is restarted.
Call of the master
The master for diagnostics, repair leaves by preliminary demand. You can make a call by phone or through the feedback form on a site. Inform the manager of the service such information:
- Make, model of the washing machine (look in the instruction manual, on the case).
- What happened, when, after what, the main symptoms of failure (it is necessary for the selection of tools, components before departure).
- Optimal time for repair.
- Contact information.
Why did the malfunction and what to do, the master will say only after the departure and examination of the washing machine. Most failures are repaired within 1-2 hours, there is no need to take the equipment to our service. Immediately after the repair is completed, the washing machine will be ready for use. In rare cases, repairs may require more time, a second visit to the master. Ready to order any components, perform complex software repair, but this often increases the timing of work.
Preparing the laundry for washing
Each fabric requires special conditions to wash effectively. These are such parameters:
In preparation, the laundry is sorted by fabric type.
Then the clothes are sorted by color. One pile should be white, the second pile should be colored.
Do not neglect the degree of dirt. If there are heavily soiled items, you should use the pre-wash mode.
Tip! Be sure to store soiled laundry in special wicker boxes or baskets. Do not allow moisture to get on the clothes, otherwise mold will form on the fabric. It is also best to wash dirty laundry immediately, without leaving it in the hamper for too long.
When washing bedding sets, duvet covers and pillowcases, the laundry should be turned inside out.
When preparing clothes for loading into the drum, be sure to check the s to make sure there are no foreign objects in them. Small items are recommended to wash in a special bag for washing.
Damage that results from overloading the washing machine
If the drum is overfilled, it is difficult to spin it, it may spin fewer times than it should or it may just get stuck and stay in one place. If you overloaded the machine once, there will be no terrible consequences, but systematic overloading will lead to problems. Then the bearings may break, and replacing them is quite problematic.
Also the hatch door will be under constant high pressure, this will lead to failure of the cuff and its deformation, the water will flow out of the hatch. In addition, the belt that is in the drive can break and the machine will stop working altogether.
Exceeding the weight of the load
Few housewives know the exact weight of things and measure them before washing. And because of the desire to do the laundry as quickly as possible, some load more than allowed. As a result, a whole range of unpleasant processes takes place with the washing machine:
- due to overloading, the vibration of the spinning increases;
- The motor overheats as it requires more power than is provided by the manufacturer;
- there is a risk that the laundry will not wash or rinse completely;
- water and electricity consumption increases.
Overheating of the motor in most cases will cause a short circuit. And that is a risk of fire. That is why manufacturers do not recommend to put more weight than indicated in the instructions.
Another important thing to consider when loading laundry is that each program has its own maximum load limit. And a full load is usually the only mode of washing cotton items. In other cases, it is recommended to put a third or half of it.
When using modes with delicate washing and woolen items, the manufacturer usually indicates the volume in the third of the maximum. For express washes, it is acceptable to load at half capacity. This is due to the fact that the machine in 15-30 minutes is not able to properly wash a large volume.
Ways to avoid the consequences of overloading and imbalance
There are a few simple rules, compliance with which will help not to overload the appliances and prevent the appearance of imbalances, and, as a consequence, serious damage to the washing machine.
- Keep in mind that the weight limit is calculated on the basis of the number of kilograms of clothes in the soaking state. Not all machines are equipped with a sensor to determine the weight of the loaded laundry. Therefore, either by experience. by weighing a certain type of things once, or by taking information from the web, you need to know the approximate weight, for example, of bed linen or other bulky clothes. The machine also does not like to wash too little stuff. So choose the optimal load volume of laundry, according to the instructions to the household appliance.
- When loading, you must ensure that there is enough room in the drum to allow the items to move freely inside it during the washing process. This should be done before starting the program, and if the clothes are difficult to move when rotating, it is better to remove half of the laundry, or refuse to wash too bulky clothes in the washing machine at all.
- By providing an even surface (on a concrete floor or tile) before installing the equipment, you can avoid the appearance of imbalance when washing. It is useful to install the feet of the washing machine on special antivibration pads, if the floor has slopes.
- An important task for the housewife before washing is to sort the laundry by type of fabric. Do not wash different types of fabric at the same time on a program designed only for cotton, synthetic or wool.
The recommendations of the manufacturer, which he prescribes in the instruction manual of the washing machine, should be strictly followed, it will prevent malfunction and unnecessary costs.
If you still have trouble and the machine freezes during the program, you must remove the bottom panel of the machine and open the valve and drain the water from the drum. Then simply remove a few extra things that create overload, or distribute the unevenly clumped laundry over the drum and run the program again.
