Home Washing machines Washing machine LG Error draining water
Washing machines

Washing machine LG Error draining water

Errors of the LG washing machine: Codes of popular malfunctions and repair instruction

Diagnosis of small problems in work is a key feature of LG Eletronics washing machines. All devices of this brand are equipped with an intellectual control system, as this simplifies operation.

A significant achievement in the field of ease of use is recognized that the errors of the LG washing machine are displayed in the form of combinations from Latin letters and numbers. Let’s take a closer look at what errors signal.

HOW TO REPAIR LG AUTOMATIC WASHING MACHINE WASH AND DRAIN PROBLEM

The main error codes

Codes of malfunctions in LG are carried out on the screen of the dashboard, facilitating further diagnosis and repair. With their help, you can try to correct the breakdown yourself or at least consult with professionals, calling the error code.

Problems with the supply system or drainage system

The inscription AE indicates an error in the automatic shutdown of the device. It occurs when a special float sensor is triggered. When it appears, you should check the technique for the presence of leaks. To do this, inspect all the details of the device in contact with water.

You can also turn off the machine power for 15-25 minutes for diagnosis, and then turn it on again.

Each user of the washing machine must at least schematically represent its device. In this can help instructions with schemes that are equipped with a new technique

Possible reasons for errors can be problems with the control unit, wear of the hatch cuff, mechanical damage to the tank.

The letter combination Fe is displayed if the tank is filled with water. In this case, the press start (sensor) blocks the operation of the system.

  • defect of an electric controller;
  • violations in the activities of the level relay;
  • malfunctions of the valve of the gulf of water;
  • A large number of foam in the tank (if the inappropriate washing is used).

To diagnose the problem, you need to check the sensor itself, the pipe and wiring to make sure of the proper operation of the press. Then you should inspect the valve for the presence of an extraneous item.

Code E1 means that water flowed into the pan of washing machine due to the depressurization of the tank.

When diagnosing the problem, check the hoses, nozzles, calipers, etc.D. If all the mechanical elements of the device are working, it is worth checking the pump and a leakage sensor for possible malfunctions

IE combination signals a shortage of pressure. In this case, the water enters the tank extremely slowly, but does not reach the required level in the allotted time (usually 4 minutes).

  • damage to the valve of the water bay (it is worth checking the electromagnetic coils to make sure that the voltage is supplied to them);
  • defect of the press.start;
  • clogging of the water.sized valve filter (usually with lime precipitation);
  • holes and excesses in the hose;
  • wiring at the intake valve;
  • poor valve resistance (below 3 kOhm);
  • breakdown of the general control board;
  • The water hose is incorrectly installed and partially overlaps the water hole;
  • insufficient pressure in water pipes.

The error of the PE PED is similar to IE, but it arises not only because of the long.folded tank of the tank with water. It is also displayed if the water entered the machine too quickly (in 1-2 minutes).

In this case, it is also necessary to check the pressure of the water supply. If the water is supplied in the usual manner, it is necessary to diagnose the press. Another reason for the malfunction could be a short circuit or a break in the network on the line.

If the repe code appeared on the display during the first washing of the machine, then the problem may be the wrong connection of the device to the sewage system

The OE malfunction is associated with the excess of the permitted water level in the drum. Often, the code is displayed in case of unsuccessful drain when part of the water merged, but some amount of it remains inside the washing machine.

The code automatically lights up if the drain procedure lasts longer than 5 minutes. A malfunction occurs due to a blockage in a drain tract, namely: in a pipe, pump, filter, hose.

After cleaning the filter of the system, the drain washer begins to function in working mode. The pump (drain pump) may refuse to work due to a breakdown, then it requires a complete replacement

The drainage hose can be twisted or squeezed. Problems with draining sometimes occur due to punctures of the air chamber and malfunction of the pressure sensor.

In some cases, problems are not connected because of the washing machine itself, but because of the blockages in the pipeline. To prevent the occurrence of this error, the drain pipes should be periodically cleaned.

UE. water imbalance code in the tank.

An error often occurs when crumpled underwear is placed in the machine, which violates the functioning of the device. The machine cannot twist the drum without risk of breakdown, and therefore stops the operation due to an unbalanced load

To eliminate the problem, open the door and straighten some things, and then start the wash again.

In some cases, a similar problem arises due to a small number of things in the drum, since the washing machine simply does not feel their weight. Then you should add more linen. If these actions have not helped, it is necessary to test the wire of the electric motor, a drive belt, a controller and a hall sensor for a breakdown.

The reason for the error may be the wrong installation of a washing machine, or rather its skew. Due to the unstable position of the legs, the device begins to vibrate and rattle

Codes of the occurrence of problems with the motor

CE error code appears when overloading the engine (electric motor) and drum overflow. For further functioning, it is necessary to remove part of the linen from the machine. If, after the drum is released, the device still does not work, and the display shows the same combination, it is necessary to check the serviceability of the motor and electronic controller.

OE Error Code LG

The LG Automatic Machine Washing machines are able to signal the causes of the malfunction, issuing the corresponding error code on the display. In models without a screen, it can be read by the characteristic glow of the control bulbs on the panel. Когда стиральная машина LG выдает ошибку OE (0E), а вода остается в рабочем баке — произошел сбой в системе слива.

Models that are not provided with the screen signal the error with two combinations of control lamps:

The period of time for which water must be allocated from the drum is regulated. It is 5-8 minutes (for various models). Minor causes can lead to a malfunction, they can be eliminated independently, and serious problems. only a specialist can solve them.

Problem: washing machine, OE error, what to do with the unit. First of all, drain the drum and remove the linen. After that, try to eliminate the breakdown on your own.

Table of faults

Our masters, guided by their own experience and the recommendations of the manufacturer, compiled a table. It included the main malfunctions in the event of an OE error, their causes and ways to eliminate.

The machine gives an error 0e and does not remove the used water

SMA after the end of the program is filled with water, the re.launch is not carried out

Damaged level sensor (Pressostat). The signal does not enter the control module

Sometimes a press start tube is enough to clean the tube. Otherwise, the sensor must be replaced

SMA lg is normally erased until the first removal of water. After which the program is interrupted

Clogging pipe pipe or small objects/garbage hit the pump impeller

Control of the control unit, some boards became unusable

If the processor is in good condition, you can change burnt parts. Otherwise, it is necessary to replace the control unit

Any spare parts for LG washing machines purchase a homelykin in the online store.

Decoding codes and ways to eliminate problems

For convenience, we presented a list of information codes in the table. Below you will also find a brief description of possible problems and methods for their elimination.

IE There is no water supply, the tank is not filled or filled very slowly (delay of more than 4-5 minutes) Check the pressure of the water and the condition of the water supply tap. Inspect the damage and breakdown of the filling valve and the press, if necessary, replace the broken part of the new
Pf Nutrition failure, malfunctions in the supply of electricity Check the correct connection of the power cord. Inspect the contact connections between the control unit and the protective filter of network interference (FSP). Inspect the inclusion indicator and check the LCD panel board connectors on the central control board
CE Overload of the electric motor Adjust the number of loaded clothing. the reloading of the drum is negatively displayed at the work of the motor. Check the functionality of the controller and engine
UE Drum imbalance (no surplus) Add or remove several things in accordance with the drum loading standards recommended for the model. Distribute crumpled linen manually. Check the engine drive and controller
PE Malfunctions of the water level sensor (press start), the machine picks up water for more than 25 minutes or less than 4 minutes from the beginning of the cycle Make sure that the water pressure in the water supply is within normal (not too high or low). Check the performance of the press, if necessary, replace it
Fe Bank overflow with water Check the integrity of contacts on the water level sensor. Inspect the filling valve, controller, water level sensor. Pay attention to the number of foam when washing, when it is excess, wait until the foam is deposited, and start the wash again
OE Lack of water drain (displayed after 5 minutes of drainage operation) Clean the drain filter from contaminants. Inspect the slope hose for bending, damage, blockages. Eliminate the breakdown of the drain pump and water pressure sensor
He Lack of water heating Check the heater and its contacts, if necessary, replace the heating element
de Luke door problems Try to close the hatch again. Check the health of the hatch door, replace the broken device with a new. Make sure the control panels are about the service, inspect the electronic fee
TE Water heating problems The temperature sensor failed, there is no connection with Ten. It is necessary to check the part for the closure or break of the contact circuits, to diagnose an electronic controller
E1 Water leak, the presence of water in the pallet of the machine There was a depressurization of hoses, a tank or other elements of the filling and drainage system. Perhaps the leakage adjustment sensor is faulty
E3 loading error Check the operability of the control unit
Se Malfunctions of the tachogenerator (Hall sensor) Inspect the tagker and the system of its contacts (the part is available in cars with direct drive and DD index)
AE Auto shutdown The float sensor worked. Check all the nodes of the washing machine in contact with water for leaks

The error de in the LG washing machine may indicate a breakdown of the hatch door

It happens that an error does not occur due to a breakdown of parts or mechanisms, but due to ordinary inattention. For example, the CL error in the LG washing machine means that the blocking function is activated from children. What to do in such a situation? To resume the operation of the unit, you need to simultaneously press and hold two buttons on the control panel. For each model, these are different key combinations specified in the instructions for the device.

To eliminate the CL error, you need to know the combination of buttons, which turns on and offs protection against children

To learn more about the decoding of errors in LG units, we suggest watching the following video.

Young housewife, immersed with the head in raising children and maintaining home life. Like a mother, it can quickly come up with how to take a child, like a wife. to cook a delicious lunch of three dishes, like a mistress. create comfort and comfort in the house. I am glad to share life hacks with readers who can facilitate homework and save time for your favorite work and travel.

Found a mistake? Select the text with the mouse and click:

Before you display various spots from clothing, you need to find out how safe the selected solvent is for the fabric itself. It is applied in small quantities to the inconspicuous section of things from the inside for 5-10 minutes. If the material retains its structure and color, you can proceed to spots.

If on your favorite things the first signs of bearing in the form of untidy spools appear, you can get rid of them using a special machine. shaver. He quickly and effectively shakes the fibers of fiber fibers and returns a worthy look.

There are special traps to combat moths. In the sticky layer that they are covered, added females that attract males. Sticking to a trap, they leave the propagation process, which leads to a decrease in the population of moths.

Stretch ceilings from PVC film can withstand 70 to 120 liters of water per 1 m 2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you can not be afraid of leaks from neighbors from above.

The threads of gold and silver, which were embroidered in the old days, are called a gimp. To obtain them, a metal wire was pulled for a long time with ticks to a state of the necessary subtlety. Hence the expression “pull (breed) gimp”. “engage in a long monotonous work” or “delay the implementation of the case”.

Removing a scale and a pile from the sole of the iron is easiest with salt. Pour a thick layer of salt on paper, heat the iron to the maximum and several times, pressing slightly, draw on the salt litter with an iron.

The habit of “economical” to use the Automatic washing machine can lead to the appearance of an unpleasant odor in it. Washing at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothing to remain on the inner surfaces and actively multiply.

Fresh lemon is suitable not only for tea: clean the pollution from the surface of the acrylic bathtub by rubbing the half-cut citrus, or wash the microwave quickly by placing a container with water and lemon slices for 8-10 minutes with maximum power. Softened dirt will just wipe it with a sponge.

In the dishwasher, not only plates and cups are washed well. You can load plastic toys, glass lamps of lamps and even dirty vegetables, such as potatoes, but only without the use of detergents.

Elimination of basic malfunctions on their own

You can eliminate many malfunctions of LG washing machines yourself, for this it is not necessary to call the master. The exception is perhaps the replacement of worn bearings, which will need a complete disassembly of cm, as well as the repair of a damaged control unit requiring the participation of a qualified master.

Diagnosis and replacement of the tubular heater

This repair does not require special qualifications. The heating element often blocks due to hard water that forms a lime scale on its surface. For the prevention of such damage, install an additional filter with cassettes on the water supply to soften water.

Ten, fastener nut and termistor (to the left of the nut) at the bottom of the LG machine tank

To clean the tank and the heating heating element, you can use citric acid, as well as other means that are on sale. Check and replace the heater is easy. To do this, de.energize and perform a number of actions:

  • Unscrew the fasteners and remove the back wall.
  • From the heater located in the lower part of the tank, disconnect two contacts, and also remove the connector from the temperature sensor.
  • Check the Ten resistance multimeter. If its value is within 25–40 Ohms, the heater is working. If the value of less than 20 Ohms or the device shows a break, the heating element needs to be replaced.
  • Unscrew the nut located in the center of the heater, and remove the grounding wire. There is another fastener nut under it, it should also be unscrewed. Using a screwdriver and lubricant WD-40, carefully tidy a rubber seal and remove the heater from the landing niche.
  • Clean the niche from the scale and dirt, grease the rubber seal of the new heater with a liquid detergent so that it goes into the groove easier, then install it in the seat.
  • Connect all terminals to the heater and the connector to the termistor.
  • Check if the water seal passes the water from the tank.

The plot about the replacement of Ten in the LG washing machine with direct drive:

Checking and replacing the press

If the display displays the FE, IE or PE errors, you should pay attention to the water level sensor in the tank. To get to it, remove the top cover of the machine. On one of the side panels you will see a round.shaped device, to which a tank and wire hose with a connector is brought.

Pressostat in LG washing machine

To check the performance of the part, disconnect the clamp and remove the hose coming from the tank. It happens that the hose is clogged with pile, threads, dirt and other small objects. If the blockage is detected, clean the hose. Then, instead of it, connect the hose of the same diameter to the press stratum, 30–40 cm long. Blow into it, pumping pressure. If you hear the clicks of the relay, the device works properly. Connect the cleaned hose from the tank to it and check for the work for cam. It will also not be difficult to replace a non.working sensor. it is enough to remove the old device, disconnecting the hose and the wires from it, and then install a new press of it instead.

Diagnostics and replacement of the filling valve

If the input valve of the smell all the time passes the water (error IE), it can be replaced independently. For this, perform the following actions:

  • Cross the water supply crane in the pouring hose and expand cm.
  • Unscrew the flood hose from the valve fitting.
  • Remove the mesh filter from the fitting with pliers and check it for a clip. If necessary, clean under a stream of water.
  • Remove the top cover of the smell, then disconnect from the valve of the nozzle.
  • Unscrew the fastener that holds the valve and disconnect the terminals of the wires.
  • Check the valve control coil with a multimeter. Its resistance should be within 2.5–4 rooms. If you find a break, the valve will have to be replaced completely.
  • If the control coil is serviceable, it remains to replace rubber cuffs in the valve-most likely they pass water due to wear.

Fill valve in LG washing machine

Checking and replacing the drain pump

The appearance of the OE error code on the display indicates a problem with the drain of the fluid from the tank. To find out the cause of the problem, you need to check the drain filter. maybe it is clogged. Pre.drain water from the tank. If the filter is clogged with garbage, clean it and set it again in place, then check if the drain works.

Clotted drain filter

If the filter is clean, but the pump does not still pump out water, you have to replace it. For this:

Eliminating the pump from the LG washing machine

It can be noted that the listed malfunctions of LG washing machines are easily eliminated on their own. But the search for damage in the control unit and the replacement of bearings is best entrusted to the experienced master. To purchase new details for replacement, you need to know the number of the model of your smell. It is indicated in the accompanying documentation and on the technology case.

Dismantling and replacing bearings in the LG washing machine:

Electron engineer with many years of experience. For several years he was engaged in organizing household appliances. I am glad to share with readers their knowledge in the field of operation and repair of devices. Loves sports fishing, water tourism and travel.

Found a mistake? Select the text with the mouse and click:

The habit of “economical” to use the Automatic washing machine can lead to the appearance of an unpleasant odor in it. Washing at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothing to remain on the inner surfaces and actively multiply.

In the dishwasher, not only plates and cups are washed well. You can load plastic toys, glass lamps of lamps and even dirty vegetables, such as potatoes, but only without the use of detergents.

Stretch ceilings from PVC film can withstand 70 to 120 liters of water per 1 m 2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you can not be afraid of leaks from neighbors from above.

If on your favorite things the first signs of bearing in the form of untidy spools appear, you can get rid of them using a special machine. shaver. He quickly and effectively shakes the fibers of fiber fibers and returns a worthy look.

The threads of gold and silver, which were embroidered in the old days, are called a gimp. To obtain them, a metal wire was pulled for a long time with ticks to a state of the necessary subtlety. Hence the expression “pull (breed) gimp”. “engage in a long monotonous work” or “delay the implementation of the case”.

Fresh lemon is suitable not only for tea: clean the pollution from the surface of the acrylic bathtub by rubbing the half-cut citrus, or wash the microwave quickly by placing a container with water and lemon slices for 8-10 minutes with maximum power. Softened dirt will just wipe it with a sponge.

Before you display various spots from clothing, you need to find out how safe the selected solvent is for the fabric itself. It is applied in a small amount to the inconspicuous section of things from the inside for 5-10 minutes. If the material retains its structure and color, you can proceed to spots.

Removing a scale and a pile from the sole of the iron is easiest with salt. Pour a thick layer of salt on paper, heat the iron to the maximum and several times, pressing slightly, draw on the salt litter with an iron.

There are special traps to combat moths. In the sticky layer that they are covered, added females that attract males. Sticking to a trap, they leave the propagation process, which leads to a decrease in the population of moths.

What to do?

Before disassembling the unit and look for the cause of the breakdown, try to restart the machine. Sometimes in the control unit there are one.time malfunctions that can be eliminated by restarting the system. Disconnect the device from the network for 10-15 minutes, then turn on and continue the wash again.

The clogging of the drain filter is the most common problem that leads to the appearance of OE error

If this did not help, it is necessary to check the elements of the drain system. Start checking from the most affordable places:

  • Check for a clogging filter. To do this, open the lower panel at the bottom of the washing machine and unscrew the part counterclockwise. Eliminate the accumulated contamination from the filtration compartment and rinse the filter under the stream of water, then install it in place.
  • Inspect the drain hose. He can be clogged or overwhelmed, which does not allow water to flow freely from the tank. Disconnect the element and rinse under a stream of hot water, with strong clogging, push the mud cork with a steel wire.
  • Check for blocking the place of connection of the drain to the sewer. To do this, spin the nozzles, clean the elements of dirt and rinse them under running water.

Most of the elements of the drain system are easiest to get through the bottom of the unit

If previous actions have not given results, it is necessary to continue the search for the problem inside the device. When the LG washing machine gives OE error and at the same time the pump does not make sounds or works too noisy, most likely the problem lies in it. You can get to the drain pump through the bottom of the unit. Carefully disconnect the element and check the impeller on the blockage, on which the garbage passes through the filter: hair, wool, threads, etc. P. When you managed to clean the pump, install it in place, performing actions in the reverse order. If after cleaning the code is still displayed, perhaps the pump will have to be replaced.

The blocked pump is not subject to repair, it should be replaced with a new

If you lowered the water from the tank manually and after that it is not typed in the drum, there may have been problems with the water level sensor. First, check the tubes that lead to the device, perhaps they are clogged and require cleansing. After cleaning, there is still no set and drainage of water? So, the press starts requires replacement.

To inspect the water sensor and its elements, it is necessary to remove the top cover

When you excluded the blockage and damage to the drain system, but the machine still writes OE error, perhaps the problem is caused by breakdown of the controller. If you do not have skills in working with electronics, it is better to entrust diagnostics and subsequent repairs to a specialist. Replacing the control module usually requires large financial costs.

As you can see, to fix the unit when the OE code appears almost always at home. If we comply with the rules of operation and carry out the prevention of pollution of the drain system, in half the cases it will be possible to avoid this malfunction.

Young housewife, immersed with the head in raising children and maintaining home life. Like a mother, it can quickly come up with how to take a child, like a wife. to cook a delicious lunch of three dishes, like a mistress. create comfort and comfort in the house. I am glad to share life hacks with readers who can facilitate homework and save time for your favorite work and travel.

Found a mistake? Select the text with the mouse and click:

The threads of gold and silver, which were embroidered in the old days, are called a gimp. To obtain them, a metal wire was pulled for a long time with ticks to a state of the necessary subtlety. Hence the expression “pull (breed) gimp”. “engage in a long monotonous work” or “delay the implementation of the case”.

Stretch ceilings from PVC film can withstand 70 to 120 liters of water per 1 m 2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you can not be afraid of leaks from neighbors from above.

The habit of “economical” to use the Automatic washing machine can lead to the appearance of an unpleasant odor in it. Washing at temperatures below 60 ℃ and short rinses allow fungi and bacteria from dirty clothing to remain on the inner surfaces and actively multiply.

Before you display various spots from clothing, you need to find out how safe the selected solvent is for the fabric itself. It is applied in small quantities to the inconspicuous section of things from the inside for 5-10 minutes. If the material retains its structure and color, you can proceed to spots.

Removing a scale and a pile from the sole of the iron is easiest with salt. Pour a thick layer of salt on paper, heat the iron to the maximum and several times, pressing slightly, draw on the salt litter with an iron.

There are special traps to combat moths. In the sticky layer that they are covered, added females that attract males. Sticking to a trap, they leave the propagation process, which leads to a decrease in the population of moths.

Fresh lemon is suitable not only for tea: clean the pollution from the surface of the acrylic bathtub by rubbing the half-cut citrus, or wash the microwave quickly by placing a container with water and lemon slices for 8-10 minutes with maximum power. Softened dirt will just wipe it with a sponge.

If on your favorite things the first signs of bearing in the form of untidy spools appear, you can get rid of them using a special machine. shaver. He quickly and effectively shakes the fibers of fiber fibers and returns a worthy look.

In the dishwasher, not only plates and cups are washed well. You can load plastic toys, glass lamps of lamps and even dirty vegetables, such as potatoes, but only without the use of detergents.

We offer a video of the article to view:

About the author:

She graduated from the Institute of Tourism of the FPU with a degree in manager, loves to travel and communicate with people. Interested in psychology, fond of dancing, learning English. Over the five years of maternity leave, she thoroughly mastered the maintenance of the household, not forgetting about her own development. Skillfully wields a word, can support a conversation on any topic thanks to interest in different areas of life.

Found a mistake? Select it and press the buttons:

In the XIX century, a lot of time was leaving for the washing of ladies’ toilets. The dresses were pre.opened, and then washed and dried each part separately so that the fabric would not deform. After washing, the clothes were sewn again.

The first officially patented washing machine was made of wood and was a box with a frame filled to half with wooden balls. Inside, the laundry for washing, the detergent and with the help of the lever moved the frame, which, in turn, forced the balls and wipe the linen.

History is known when the kitten fell into the drum of the washing machine and, having passed the full washing cycle on the Woolen things program, got out of the unit whole and unharmed. The only nuisance for the pet was an allergy to washing powder.

Washing machines are related to the emergence of “wash money”. In the 30s of the XX century, American gangsters used the laundry network as covering their illegal activity. Giving income from criminal activity for revenue received from cleaning clothes, they turned “dirty” money into “clean” money.

There are a variety of balls that are used in the washing machine. Antistatic will not give the fabric to stick to the body after washing, balls with special loops will “comb” the villi and prevent the appearance of the rollers, and silicone with pimples will not allow fluff when washing outerwear washed.

The expression “soap opera” (“soap”) did not accidentally arise. The very first series and show, whose audience made up women, were broadcast on television at a time when housewives performed cleaning, ironing and washing. In addition, to attract spectators to screens on the air, advertising rollers of detergents were often scrollful: soap and powders.

For washing small things on the road or hotel, it is convenient to use a regular plastic bag. Socks or tights are kneaded inside the tied package with water and a small amount of detergent. This method allows you to pre.soak things and perform washing without damaging the fabric and without spending a lot of powder and water.

Washing machines equipped with functions “without ironing” or “light ironing” can wash underwear and at the same time practically do not crush it. Such an effect is achieved due to a special approach to squeezing. it is performed at low speeds, with large pauses, and a small amount of water is preserved in the tank.

Cosmonauts, being in the orbit of the Earth, solve the problem of dirty things with the original method. Clothes are dropped from a spaceship, and it burns in the upper layers of the atmosphere.

How to clean the steam generator from scale

Instructions for installing a ceiling drying-liana

DIY underwear dryer

What is the difference between a steam generator from a steamer: what is better to choose

How to choose a drying machine for home underwear: tips, parameters

Do.it.yourself renovator repair

How to choose a floor dryer for linen: tips, best models, video

How to clean the scapard of scale at home

How to use a converter for clothes, instructions

Candy washing machine codes

Samsung washing machines error codes: decryption and description

Error codes of washing machines Bosch

Stirkaved.ru © 2022. When using materials from the site, the active reference is obligatory.

Deciphering the fault codes that LG washed with a display shows

If the washing machine is equipped with an electronic scoreboard, then with a breakdown or failure in work, a code will appear on it. After decrypting and determining the cause, the malfunction in most cases can be eliminated on its own.

OE code. drain does not work. Main reasons:

First you need to check the launch of the washing machine for an excess or formation of a blockage.

Then inspect the condition of the place of its connection with the sewer drain, as well as the pipe itself. If the blockage is not found, they proceed to assess the performance of the pump and other elements.

Sometimes reloading the machine helps to cope with the problem. If a blockage is detected, it is cleaned, and broken parts are replaced with new.

UE (U3) code indicates an imbalance of the drum axis. Main reasons:

  • A drum overload or uneven distribution of things.
  • Incorrect installation of the device.
  • Control Bloc.
  • Module malfunction.
  • Destruction of the bearing.
  • Damage to the tacockman.
  • Stretching of a drive belt.

First you need to open a washing machine and manually try to distribute the linen, or half devastate the drum. If this did not help, the device is rebooted.

Когда ни один из перечисленных способов не помог справиться с проблемой, нужно разбирать корпус и искать вышедшие из строя детали. It is recommended to start checking by assessing the state of the belt and the tapacker.

DE code indicates that the hatch door is not blocked. While washing does not begin. The reasons:

  • Fucking the cuff;
  • a foreign object or blockage is in the opening of the castle;
  • control module failure;
  • breakdown of uble;
  • Damage to the handle of the launch of a washing machine;
  • Damage of the Luke loop.

First you need to inspect the castle, perhaps the entry of the tongue into the hole is interfered with some foreign object. Then you can try to restart the washing machine. If this did not help, you will have to change the ubble, the hinges of the hatch or its handle. What does the error code mean mean, read in this article.

Le. motor blocking error. First, the machine picks up water, then several times tries to start the drum into the work, after which the corresponding code appears on the screen.

Causes and methods of elimination:

  • Quiet closure of the door. It needs to be opened and snap again.
  • Office module. Rebooting technology will help.
  • Overloading the drum, when the device is operating in the “manual washing”, “wool” and “silk” mode. Part of the things must be removed, after which it will be possible to continue the wash.
  • The drum is blocked due to the ingestion of some small object. Inspect it, disassemble the tank, remove a mechanical obstacle.
  • Low voltage in the network. To continue the wash, you will have to wait for its stabilization.
  • The tachogenerator broke, the engine winding burned out, the control module or ubble failed. To cope with the problem, you need to replace damaged elements.

AE is an automatic shutdown code. Causes and methods of elimination:

  • There was a failure in the operation of the control module. a reboot of the equipment is required;
  • Water accumulated in the pallet (for cars equipped with a water area)-if so, you need to check all the clamps and hoses, perhaps some of them just went away;
  • The control module has broken, its replacement is required;
  • Luke’s cuff, nozzles or tank has leaked, their replacement is required;
  • Aquastop system failed. it is being repaired or changed.

CE code appears when overloading the engine of the washing machine. Causes and methods of elimination:

  • There is too much linen in the drum. It needs to be unloaded.
  • There was a failure in the work of the management board. Rebooting technology will help.
  • Damage to the engine, bearings, tacock or control module. All of these parts are subject to repair or replacement.

When the FE code appears, the washing machine stops the washing and constantly picks up and drains water. Causes and methods of elimination:

  • There are too many foams in the drum. water must be drained, linen and let the typewriter stand with an open door for a day;
  • A failure in the operation of the control module. the machine must be reloaded;
  • The inlet valve, a press start, control unit, or the wiring was failed. the detected malfunction is corrected by replacing or repairing parts.

IE code appears when launching washing, while the machine does not gain water. Causes and methods of elimination:

  • There is no water in the tap or the pressure is too weak. You need to pause and wait for the situation to stabilize the situation.
  • The shut.off valve is closed. It needs to be opened.
  • Passed by the flood hose. The mechanical obstacle is eliminated.
  • The filter was clogged at the place of attaching the pouring hose to the washing machine. It needs to be cleaned.
  • A control module fails. Reboot will help.
  • The inlet valve, press stratum or control board broke. Faulty parts are repaired or replaced.

PE code appears when a person tries to launch a washing program. over, the device does not perform any further actions. Causes and methods of elimination:

  • Damage to the press.start. it requires its replacement, this is the most common reason for the appearance of the PE error;
  • Control board. Reloading of the machine is required;
  • The wires going to the press start. they need to be corrected;
  • Control fee has broken, or wiring is damaged. repair or replacement is necessary.

What do the signals of the LG washing machine mean without a display?

If the washing machine is not equipped with a display, then errors on it appear as a set of signals. The most common of them are described in the table:

What’s happening The reasons Signal set
Water does not merge The drain pump or press station broke down, the drain hose or sewage stock clogged Simultaneously flashing indicators of squeezing 500, 800, No Spin and rinsing
No squeezed, water merged, washing ended Overload or underloading of linen, tank breakdown, belt reversal All spin indicators shine at the same time
Luke door is not closed Ubble broke, blockage formed in the castle, sank the loops or the cuff was deformed All indicators blink and burn: temperatures, washing and rinsing
The machine stopped working, merges and picks up water again The tank is full of water, or there is a lot of foam in it At the same time, indicators of preliminary and main washing flash, indicators of blanket, wool and synthetics are burning
The device does not gain water There is no water or the pressure is too weak, the valve is blocked, the blockage was formed in the filter of the pouring hose, the inlet valve, press stratum or control board broke down The indicators of the main and preliminary washing are burning and flashing
The machine does not start to work In 90% of cases, press stratum is faulty Except, rinsing and washing indicators burn and blink
Water does not heat up, washing stops in the middle or at the beginning of the cycle The heater broke (in 80% of cases), or temperature sensor All temperature indicators are burning

What do the codes of errors of LG washing machines mean without a display, read here.

Diagnostics of washer LG

In a situation where the water remains in the tank, it is necessary to diagnose the functionality of the nodes that are involved in the drainage process.

In most cases, when failing in the washing program, the LG washing machine issues an appropriate error code for the display. This helps to decide which element does not work in the washer, as it should be.

At first glance, it may be difficult to clearly determine the site of failure. Pay attention to the behavior of the machine when performing the program. whether the pump begins to work, as the drain goes. the drain is completely not performed or it passes very weakly, etc.D.

Not always the LG drain system “dies” immediately. Very often, alarming symptoms begin to appear before full breakdown:

  • Not enough a good output of things after washing.
  • Uncharacteristic sounds for normal work.
  • Water leakage.
  • Plum triggers later and t.D.

If any of the listed signs is present, you should not pull with diagnostic measures. Ignoring these points can lead to much more complex breakdowns and, as a result, to a more expensive and complex repair.

If the problem with the drain arose for the first time, you can try to restart the washing machine. In the case of a malfunction as a result of a combination of circumstances, the normal work of the SMA may restore itself.

Problem and its solution

To restore the normal operation of the LG washing machine, it is necessary to sequentially analyze the operation of the device. It is better to start with the simplest options for possible causes of failure.

Zasori drain filter

On the front side of the LG washing machine, the drain filter is located below the panel. This part serves to capture small foreign objects.

According to the rules of operation, it should be periodically cleaned. If this moment is ignored, then a failure in the work of washing machine is possible, up to the complete stop of the drainage drainage.

If there is water in the washing machine, it must be drained through the emergency plum hose, which is to the left of the drain filter. Before starting work, you should prepare wide low water tanks that will begin to pour out and rags.

How to clean the drain filter, you can look at

The sewer clogged

When the program is moving to the drain, the pump begins to work, but the outflow of water does not occur. This may be connected with the blockage of the sewer system. Such a problem, if any, is not directly connected with the washing machine.

To determine that there is a blockage of the sewage system, the drain hose should be disconnected from the insert into the pipe and simply thrown into the bath, sink, toilet or bucket. In the event that the water is pouring without problems, we can talk about problems with the general sewer in the apartment.

Cleaning sewer pipes will help to solve the problem. It is possible to conduct it yourself or you should call for this locksmith.

Calm hose problems

If the LG washing machine tries to drain, the pump is actively working, and the water does not leave, maybe there is a physical obstacle.

The condition of the drain hose leading from the washing machine to the sewer is very important for organizing the drain process. If there are strong excesses or furniture transmitted by furniture, then this can cause a violation of the outflow of water after washing and rinsing.

If a defect in the location of the hose is detected, it should be released and straightened. It is also necessary to make sure that it is located exactly as recommended by the manufacturer. with a rise above the level of the tank.

In addition, the drain hose can be clogged. In this case, it will need to disconnect from the sewage system and from the washing machine, and cleaning. In case of damage to the drain hose, it is recommended to replace the part in its entirety.

Error Code OE on LG Front Load Washer: How to Diagnose and Fix

Damage to the drain pump

If, when switching to a drain mode, the pump does not start working (does not publish the usual rumble), there is a chance that the breakdown is connected with it precisely. There is also a situation when the machine is buzzing, but water still stands inside. In this case, the display may have code oe.

The drain pump can become unusable even in a relatively new washer if the operating rules are violated. If the sound of the pump is working, but there is no outflow of water, then in most cases this indicates a breakdown of the impeller. The lack of buzzing often indicates a breakdown of the pump engine.

Solution of the problem. replacing the part with a new, corresponding model of the washing machine.

Disorders in the operation of the control module

If the control unit is failing, then the discharge of water during draining can pass unstable (then normal, then slowly) or completely stalled. In this state of equipment, it will be necessary to analyze the state of the scheme, check its performance.

If, as a result of the diagnosis, path defects or burned out elements are found, professional repairs will be needed.

The best option is to seek help from a specialist who is able to check and return the operation of the LG washing machine. With very serious breakdowns, even the replacement of the entire control module may be needed.

Pressed by the press

The LG washing machine, in case of violation of the press, can stop its work when washing or during rinsing.

This is due to the absence of a signal from the press start to the control unit on the presence of water in the tank.

The solution to the issue may be the repair/cleaning or replacement of the part. There is a water level sensor in the LG machine under the top cover. You can dismantle the old detail and install a new one on your own.

Damage to the wiring

If the drain pump, and the press, and the board, the cause of the absence of drain may be a break in an electric circuit or contacts from the terminals from the terminals. To restore the operation of the device, it is important to find the place of violation of the contact.

To eliminate the defect, faulty contact may be enough or it may be necessary to replace the group of wires or the entire train.

Prevention of occurrence

How to prevent the appearance of an error (O3):

  • regularly clean the drain filter of the machine from dirt and foreign objects;
  • Before washing, check s for checks, coins, bags, etc.;
  • Lingerie with metal and plastic seeds put in the tank only in special bags for washing;
  • install a protective relay or voltage stabilizer in front of the lump;
  • rinse the filter under a strong stream of water and soak it in a heat solution of citric acid to relieve deposits.

You will find a lot of important and useful information about codes of errors of washing machines LG in this section.

Thus, the error “03”, or “Oe” on the washing machine LG speaks of blocking the drain. The cause of the problem may be filter, nozzles and sewage clogs, as well as malfunctions of the pump, electronic unit and press startup.

Cleaning systems can be done independently, but for disassembling and replacing parts it is recommended to invite the master.

Author

Laidred

| Denial of responsibility | Contacts |RSS