Home Washing machines The drum of the washing machine LG rotates tightly
Washing machines

The drum of the washing machine LG rotates tightly

What to do if the drum in washing machine is poorly spinning

I teach household appliances repair masters! Salary from 80,000 !

Even a high.quality washing machine is not safe from breakdowns. Drum. one of the vulnerable places. What to do if he began to spin badly? What measures to take: call the master, call the service center or try to fix the problem yourself? You will find answers to these questions in our article.

The most typical causes of the problem

First you should understand, as a result of which the washing machine does not rotate well when washing. It is after the complete diagnosis of the machine gun that you can determine which way to go in order to eliminate the malfunction. The drum may stop spinning due to several factors.

  • Overloading washing. For each automatic machine, the maximum allowable mass of dry linen loaded into the drum is determined. Most of modern devices are equipped with special sensors that determine the weight of things. It is because of the overload that the intelligence can refuse to start the program launched by the user.
  • Damage to the drive belt. In such a situation, if you crank the drum with your hand, it will spin freely, but at the same time the washer itself will not be able to rotate it. The drive belt has the ability to wear out and lose its properties. Also, maybe he just jumped off the seat.
  • Engine brushes problems. In machine guns equipped with collector engines, brushes are one of the most vulnerable places. If you have been using such a machine for a long time, and the electric motor has not received the necessary maintenance, it is better to check the wear of the brushes and, if necessary, replace the part. In most cases, after replacing the engine brushes, the machine returns to a standard operating mode.
  • The failure of the control module. The failure of the electronic unit is considered one of the most serious problems in order to return the machine operability to reflash or install a new module. It is better to entrust this malfunction to the master to eliminate such a malfunction.
  • The failure of the electric motor. If the drum is spinning unevenly, or even stands still, perhaps the engine “flew”. A failure may occur due to the closure or damage of the components of the motor. Engine repair work is classified as complex, so it is not recommended to perform them yourself.

It is precisely such malfunctions in the system of the-automatic washing machine that can lead to problems with the rotation of the drum.

Some reasons can be determined and eliminated independently, more serious damage will help to eliminate the qualified master.

Fault prevention

So that your home assistant does not jump when spinning, and indeed lived happily ever after, you just need to observe simple operating rules:

  • observe the rules of installation;
  • As often as possible, it is better once a month, to check and clean all kinds of filters from garbage;
  • choose the right washing programs;
  • monitor the quantity and type of loaded linen, do not overload the washer;
  • Do not “drive” the car to exhaustion, limit the number of washes per day;
  • without unnecessary need not to use programs that require maximum speeds and high temperatures;
  • check the clothes before laying in the tank for the presence of small objects that can get into the car;
  • as soon as they heard suspicious sounds or strange behavior of the car. immediately stop the wash and understand the reasons.

The belt flew or weakened

Symptoms: the drum rotates with his hands, but when washing does not spin or rotates badly.

The drive belt can break, fly or weaken over time, it can wrap up on the pulley of the drum and completely block it. Remove the back wall of the car and see what’s with the belt. If the belt just flew off, it is easy to put it in place, though the “flights” of the drive belt should alert you. A torn or stretched belt must be replaced.

Front replacement. A simple procedure, you need only when buying a new belt to carefully ensure that its length and the number of teeth on the belt match.

We independently find out the problem

The primary diagnosis of breakdowns will be affordable for any user. For this, certain procedures should be performed:

  • clarify the maximum weight of the linen in the instructions for operation;
  • check that the door is not blocked. As a rule, the drum ceases to spin if the filter of water drain is closed;
  • Try to turn the drum with your hands. If everything is fine, and in the process of automatic washing, a problem is observed, you should look for the cause in wires, a tachogenerator, a managerial module;
  • The cavity is necessarily performed between the tank of the machine and the drum for the presence of foreign objects. If everything is fine, the heating element could refuse. The drum can also stop rotation due to a non-working heater, completely blocking the washing process;
  • Inspect the drive belt. It should be corrected or completely replaced with a new analogue;

We carry out repairs

Consider how to act in a particular situation:

  • An extraneous object came. Such situations arise quite often when we forget to check the s before washing. All small items in most cases remain in the drum itself or a sealing element surrounding the loading door. Sometimes such gizmos during washing fall into the gaps created by the drum and tank cars, they get stuck there, becoming an obstacle of normal rotation. Such suspicion is checked quite simply. First, we try to twist the drum manually. If it stands still, then it is recorded by some kind of thing or an extraneous subject. To find out their location in relation to Baku, you should slowly twist the drum with your hands, highlighting the space into the space with a flashlight. To obtain access, you will have to extract the heater, and through the resulting niche to pull out an extraneous subject. Magnets or wire hooks can help in such work well. The problem, if something is stuck in the upper or side part, you will have to disassemble the tank. This is not the best solution, because then you will have to close the seams with sealant or cold welding.
  • Damage to the bearings. You cannot hand the drum with your hands, or do it with great difficulty, hearing the creak and grinding? Most likely, the problem is hidden in oil seals and bearings. The first element is represented by special sealing seals that protect the bearings from moisture from getting on them. Gradually, its integrity deteriorates, the liquid begins to wash out the lubricant on the bearings, causing corrosion. The breakdown is eliminated by the complete replacement of the failed elements. The work is difficult, it is recommended to invite a specialist. By the way, the process is expensive. For example, on Samsung brand machines, its cost is such that it is better to purchase a new washing machine.
  • The filter clogged. At such moments, the machine stops in emergency mode, stopping the process and blocking the door. You can clean the filter with your own hands. In the operating instructions, the procedure is scheduled in detail. Most often it is in the lower part. Gently unscrew the lid, clean the element and drain the water remaining in the typewriter. It is recommended that before performing such work under the washing room, lay a sufficient number of rags that absorb the water spilled onto the floor.
  • The drive belt flew. It is pulled from the drum to the motor, stretches from long work, stopping normal torsion. On the disconnected unit, it is allowed to perform the check. twist the drum. If the pupil is free and there are no noise from the electric motor, then the belt was damaged. Often it flies from uneven loads or overloads of the machines, dry out, loses elasticity, becomes fragile. To check his condition, you can remove one of the side panels of the washer. The flying belt is installed on the principle of a bicycle circuit. If necessary, a new analogue is bought. The belt is pulled with such force that during touching it, it must make a ringing sound.
  • The refusal of the electric motor. In older models, the condenser. a cylinder installed next to the engine most often fails. If it refused, the engine is not able to turn on, the drum, of course, does not rotate either. In such a situation, a capacitor is needed to replace. Frequent phenomenon. wear out brushes. They become short over time, stop reaching the motor collector, without passing it to the rotational process. The problem is solved by replacing brushes with preliminary cleaning of the collector from dirt. The motor is dismantled. To do this, remove the rear panel and turn the washer on the side. Fasten screws are unscrewed, terminals with wires are disconnected. After installing the brushes, scroll the motor pulley. If it works without noise, then the work is done correctly.
  • The problem with the wires. It is possible that there is no voltage in the wiring. This can happen due to the refusal of the managerial module or a malfunction of the wires that write down the electric motor. You have to check each element with a tester, isolate or completely change.
  • Uncontrolled opening of drum doors occurs. This is characteristic of models with vertical loading of linen. The sash open even in the process of washing, although the design of elements completely eliminates a similar possibility. Worst that the tank is destroyed from this, or the drum receives deformation. The intervention of an experienced specialist is required.
  • The refusal of the module responsible for management. He is responsible for the performance of each individual washing unit. Incorrectness in the work can cause a drum stop. Will have to replace the element or try to repair it. This will require knowledge and special skills, otherwise independent actions can only aggravate the problem.

How to fix it with your own hands

If for some reason it is not possible to call the master, then you will have to be patient, since it is unlikely that you can quickly fix the problems. You must definitely understand the technical device. To do this, instructions from the LG, Samsung or Indesit washing machine will come in handy.

What can be done so that the machine drum works as before?

We carry out repairs

Consider how to act in a particular situation:

  • An extraneous object came. Such situations arise quite often when we forget to check the s before washing. All small items in most cases remain in the drum itself or a sealing element surrounding the loading door. Sometimes such gizmos during washing fall into the gaps created by the drum and tank cars, they get stuck there, becoming an obstacle of normal rotation. Such suspicion is checked quite simply. First, we try to twist the drum manually. If it stands still, then it is recorded by some kind of thing or an extraneous subject. To find out their location in relation to Baku, you should slowly twist the drum with your hands, highlighting the space into the space with a flashlight. To obtain access, you will have to extract the heater, and through the resulting niche to pull out an extraneous subject. Magnets or wire hooks can help in such work well. The problem, if something is stuck in the upper or side part, you will have to disassemble the tank. This is not the best solution, because then you will have to close the seams with sealant or cold welding.
  • Damage to the bearings. You cannot hand the drum with your hands, or do it with great difficulty, hearing the creak and grinding? Most likely, the problem is hidden in oil seals and bearings. The first element is represented by special sealing seals that protect the bearings from moisture from getting on them. Gradually, its integrity deteriorates, the liquid begins to wash out the lubricant on the bearings, causing corrosion. The breakdown is eliminated by the complete replacement of the failed elements. The work is difficult, it is recommended to invite a specialist. By the way, the process is expensive. For example, on Samsung brand machines, its cost is such that it is better to purchase a new washing machine.
  • The filter clogged. At such moments, the machine stops in emergency mode, stopping the process and blocking the door. You can clean the filter with your own hands. In the operating instructions, the procedure is scheduled in detail. Most often it is in the lower part. Gently unscrew the lid, clean the element and drain the water remaining in the typewriter. It is recommended that before performing such work under the washing room, lay a sufficient number of rags that absorb the water spilled onto the floor.
  • The drive belt flew. It is pulled from the drum to the motor, stretches from long work, stopping normal torsion. On the disconnected unit, it is allowed to perform the check. twist the drum. If the pupil is free and there are no noise from the electric motor, then the belt was damaged. Often it flies from uneven loads or overloads of the machines, dry out, loses elasticity, becomes fragile. To check his condition, you can remove one of the side panels of the washer. The flying belt is installed on the principle of a bicycle circuit. If necessary, a new analogue is bought. The belt is pulled with such force that during touching it, it must make a ringing sound.
  • The refusal of the electric motor. In older models, the capacitor. a cylinder installed next to the engine most often fails. If it refused, the engine is not able to turn on, the drum, of course, does not rotate either. In such a situation, a capacitor is needed to replace. Frequent phenomenon. wear out brushes. They become short over time, stop reaching the motor collector, without passing it to the rotational process. The problem is solved by replacing brushes with preliminary cleaning of the collector from dirt. The motor is dismantled. To do this, remove the rear panel and turn the washer on the side. Fasten screws are unscrewed, terminals with wires are disconnected. After installing the brushes, scroll the motor pulley. If it works without noise, then the work is done correctly.
  • The problem with the wires. It is possible that there is no voltage in the wiring. This can happen due to the refusal of the managerial module or a malfunction of the wires that write down the electric motor. You have to check each element with a tester, isolate or completely change.
  • Uncontrolled opening of drum doors occurs. This is characteristic of models with vertical loading of linen. The sash open even in the process of washing, although the design of elements completely eliminates a similar possibility. Worst that the tank is destroyed from this, or the drum receives deformation. The intervention of an experienced specialist is required.
  • The refusal of the module responsible for management. He is responsible for the performance of each individual washing unit. Incorrectness in the work can cause a drum stop. Will have to replace the element or try to repair it. This will require knowledge and special skills, otherwise independent actions can only aggravate the problem.

Useful tips from specialists

When using a machine for washing linen, it is recommended to fulfill some important requirements to save the drum and other nodes from probable damage:

drum, washing, machine, rotates, tightly
  • Always clean your s, sending things to washing;
  • Load the most allowed weight, in case of overload. stop the program to facilitate the drum;
  • Do not try to force the drum for a long time if it has stopped working. This is allowed only to check the causes of the breakdown;
  • Carefully use the means to clean the scale. It is recommended to purchase them only in specialized stores, to use in accordance with the instructions;
  • By replacing the elements that have lost the performance, purchase only branded analogues corresponding to your marking. Fake details will not be able to work for a long time and will cause the next faults.

By fulfilling these simple rules, you can extend the operational period of your washing machine.

Master’s call: where to find and how much to pay?

Not in all cases to fix the washing machine is possible on your own. If there is no special knowledge and tools, it is advisable to contact the repair service.

It is possible to find such a company on the Internet. There you can also read reviews for the work of masters, study the price list.

The average cost of work in the capital:

  • belt replacement. from 900;
  • replacement of the motor brushes. from 1,400;
  • wiring breaks. from 1,500;
  • Replacing bearings. from 3 300 and t.D.

If the details are required, their value by the customer is paid separately.

The price also increases, if along with the elimination of a breakdown, it is required to prevent other nodes or replacement of worn parts, the unsatisfactory condition of which has become noticeable after analyzing the washing machine.

Companies that work officially necessarily give a guarantee for work carried out by the master.

The washing machine does not get water

In the evening they turned on the washing machine. The washing mode was put on synthetics, the door of the hatch closed, but there is no movement from the motor, that is, the engine does not spin at all, water is also not poured. I checked the supply of water into the washing machine, unscrewed the hose from the washer, put it in a bucket and turned on the crane, the pressure like crazy. What could be

Here you can’t tell everything in 5 words, on the site there is a very cognitive article so I recommend it to read it. The fact is that not only the valve is responsible for the water bay, but also other details on the washing machine. You can go through

Watch the video why the washing machine does not get water

Luke of the Washing Machine does not work

The problem is the following, I turn on the washing machine, it seems that everything happens normally, I close the hatch, press the start button, and no actions take place, the drum stands in place, as if dug. And most importantly the hatch door is not blocked. As I think, at least something but should happen, because the program is selected normally and no errors are issued

Of course, it should happen. The hatch door should be closed, or rather to be blocked, until this will not happen, the water will not be poured into the washing machine and, of course, the brains will not give a signal for the beginning of washing, so the drum rotation will not be there either. First of all, you need to pay attention to the lock indicator, if it flashes, as with an open door, then you need to remove the lock and look. It happens that a hook on a bow that pushes a locking mechanism, simply does not finish it to the end. You can watch the video about this

Finally I want to say a few words about the control module. I do not recommend repairing this spare part with your own hands, I can very much get very much and, as a result, the cost of repairs can increase significantly. Trust this work to a specialist. Understand, it is simply unrealistic to prompt something about this, since it is necessary to hold the control unit in your hands and take measurements in reality, but somehow from the photo. Perhaps that’s all. a successful repair. Subscribe to my channel, watch my videos

reasons why the drum hangs in the washing machine. Elimination of problems

Master with 12 years of experience. Repair of washing machines and refrigerators.

If usually a silent washing machine walks, jumps, thunders, you need to urgently find out the reason for such disgrace. The source of cacophony during washing and spin is an increased backlash of the drum. This means that he is shaken, hits the tank when pressing, touches the cuff.

Friction not only makes unpleasant sounds, but also damages the device systems. If you do not want to call a specialist, but is burning with the desire to “fight” yourself, first find out why the drum hangs in a washing machine.

Why is the drum walking a shake

These reasons cause reinforced backlash in the machine. To correctly diagnose the problem, pay attention to the features of the decay, the size of the gap.

How to check backlash

Twist an empty cylinder with your hands. If he creaks when moving, touches the tank, then the bearing is loose. A broken bearing also causes leakage during washing.

Pull the drum to yourself, let go. If it staggers strongly, sways, falls, sinks, spontaneously separates from the cuff. shock absorbers flew.

drum, washing, machine, rotates, tightly

When the drum is moving, the case shakes, sharply twists, it seems that the machine has “flew off the coils”? Most likely, Krestovin cracked.

The movements are smooth and silent, but something crashes and rattles along the walls? It seems that the small object is stuck in the tank. If you know how to handle tools, you can eliminate these troubles at home.

How to fix the drum of a washing machine-automatic machine

To fix the machine yourself, stock up on free time, patience and our recommendations:

  • Learn the instructions. The “autopsy” process depends on the characteristics of the model. If you have lost the document, on our website there are instructions to almost all types and models of household appliances.
  • Free the workspace. In order not to lose and break anything, you should have enough space for maneuvers and disassembling the mechanism.
  • Grasp the camera or camera. In order not to get confused in wires and details, take the process in stages, numb. This will help you easily return everything to places.
  • Prepare the tools. One screwdriver is not to do with. There may be two of them. cross, flat. Key sets, awl, hammer, pliers, special lubricant, liquid for removing rust, flashlight are also useful.

Important! Buy spare parts for replacement only after disassembling the car. So you will definitely determine the parameters of the desired part.

5 ways to get an extraneous object from the tank

If you do not get a stuck thing in time, it can pierce the container, cause irreparable damage, and cause the flood.

  • Hearing suspicious sounds, illuminate the peoled walls with a flashlight. Slowly rotating the tank, determine the source of noise. If you’re lucky, you will find a bone from the bra. Fingers or pliers very carefully take out the item.
  • Turning the drum, feel resistance? So, something burned between the drum and the casing. Increase the gap near the hatch with a screwdriver, insert the wedge. This will improve access, allow you to find a thing, carefully get it. If you can’t see it, try using a flexible rod to detect a stuck thing. At the end, straighten the cuff, move the cylinder in place.
  • If you have not found an item in the tank, it is quite possible that it is stuck in a heating element. Depending on the brand of the device, you need to remove the panel (rear, front, lower), get the heating element. Check if the subject has hooked on the heater.
  • In the compartment with the water heater, nothing was found? Try to look through the hole of the lower (drain) pipe. To do this, put the car on the side or put at an angle. Slowly scroll through the cylinder by finding an object. extract.
  • If these tips are not suitable for your model, the most troublesome option remains. dismantling the drum. This method should also be used to replace bearings, shock absorbers, crosses and other details.

Dismantling of the tank. universal tips

Before proceeding to dismantle, make sure your model is equipped with a collapsible tank.

Some modern models of brands Bosh, Indesit, Ariston, Candy are equipped with whole containers. Such insides are not subject to repair and change completely, with all components. There are daredevils who cut them, and then weld them back, but this is a rather risky event, and the result is not always positive.

Bucky from the brands LG, Samsung, Electrolux are well versed, and spare parts are easy to purchase. Ready for work? Then. let’s go!

  • Using the screwdriver, unscrew all the removable panels and lids, the powder distributor, disconnect the electrical connectors to ensure maximum access to the internal nodes. Some models are equipped with special latches that simplify the matter. In order to get to the container, you need to dismantle the counterweights.
  • The tank is attached to the body with suspended springs from above, shock absorbers from below. Shock absorbers remove vibration during an annex. Even if only one breaks, for the correct work, replace both.
  • For a comfortable replacement of spare parts, failure from the body.
  • Remove the plastic casing by promoting the bolts or opening the latch (depending on the model), take out the core. In the drum, on the shaft, there are drives of the drive and seats for bearings. The inner bearing sits on the lower surface.
  • Screwdriver, take out worn parts with an awl. Clean the shaft of rust, check the stem for damage.
  • Put the bearings to the seat, check the fitness density. Important! The size of the parts should correspond to the model of cm.
  • Install the oil seal. It protects the system from water getting. Make a thick lubricant.
  • When changing the bearings, pay attention to the cross, it is attached to the cylinder shaft. If there are cracks on it, it is better to replace it. unscrew the fastening bolts, remove the old one, put a new one.

How to remove the tank from the brush of Zanussi brand

The drum is poorly spinning in the washing machine: what to do

The most common problem in the operation of washing machines is a partial or complete breakdown of a rotating drum, which is why it begins to rotate slower or completely stops moving.

In this case, it is important to first determine the cause of the malfunction, which will show what further actions should be taken.

Reasons for the malfunction of the drum

The most common reasons why the drum does not rotate in the washing machine include:

  • Overloading the tank with linen.
  • Damage to the electric motor drive belt.
  • Damage to the electric motor.
  • Faulty carbon brushes in the engine.
  • The unbalanced drum mechanism.
  • There is no voltage supply

Spins, but tight

If your drum mechanism rotates tightly, then an understandable factor is almost harmless in the consequences of overload.

In order to find out whether this is whether this is whether this is the instructions for your washing machine and read what all the loading of the linen for your machine is the maximum.

Many new washing models simply do not start working until the weight of the linen exceeds the permissible norm.

If there are problems with the speed of scrolling the drum already at the push.up stage, then perhaps the problem lies not in the overload, but in the unbalanced tank, in which the washing device cannot gain the required number of revolutions for quality work. To do this, you need to find out whether linen is evenly distributed around the entire perimeter of the tank.

And another most common reason is the entry of foreign objects into the tank and the drum mechanism. This can interfere with the normal operation of your washing device. Even because of such a seemingly insignificant reason, the drum of the washing machine may begin to rotate tight.

It does not rotate at all

The alleged reasons:

When the washing machine begins its washing cycle with the unbalanced tank or simply overloaded with linen, a situation may well occur when a drive belt may jump or even tear. In this case, you can replace and tension of the drive belt with your own hands.

The force of the drive belt tension should be brought to such a level that when touching it, you can hear a ringing sound.

If the problem is a breakdown of coal brushes, then at least one of them will be charred. If the brushes are and, then you can change them yourself. To do this, remove the electric motor and, after this procedure, replace the already worn brushes with new details.

There is such a probability that the malfunction of the engine itself will already be the basis for the poor operation of the drum or even its complete breakdown.

A short circuit or a break in windings are quite rare situations that users of household appliances had to face.

In this case, it is not recommended to try to fix something yourself. Better trust this to professionals.

Sometimes the tank of the washing machine rotates tightly and due to the lack of voltage supply. As a rule, if the electricity does not fall on the winding of the electric motor, then the drum does not begin its movement. It is likely that there is a violation of the electric circuit, and perhaps one of the software modules came out of the system.

Diagnose a Noisy Wobbly Front Load Washing Machine Drum, Spyder Assembly

The master in the service center will tell you the present reason after the complete diagnosis of the washing device. And in order for this to be not there, you should monitor the nutrition so that there are no closures and voltage jumps. To do this, we advise you to purchase a voltage stabilizer.

How to prevent possible breakdowns of the washing machine drum

When using the washing machine, follow important rules for the fact that you could protect the drum mechanism from possible breakdowns.

  • Check the s of all the clothes before loading it into the tank.
  • Do not put linen more than the maximum loading of the machine allows.
  • Do not rotate the drum mechanism in forced order if it suddenly failed.
  • Use all kinds of means to clean the drum from scale with particular caution.

If you follow these simple rules, you can extend the service life of your machine and protect it from breakdowns. Then your machine will not bother you with its endless breakdowns and it does not need expensive maintenance!

drum, washing, machine, rotates, tightly

Top stores of washing machines and household appliances:

  • Mvideo.ru/- household appliances store, a large catalog of washing machines
  • Holodilnik.ru. inexpensive household appliances store.
  • Techport.ru. profitable modern online household appliances store
  • Citilink.ru. modern online store of household appliances and electronics, cheaper than offline stores!
  • ru.Aliexpress.com. spare parts for washing machines

The drum is spinning tightly in the LG washing machine

If the drum is spinning tightly, it is clear that something is wrong with the LG washing machine. Without sufficient rotation, the washer can neither squeeze the linen, rinse or wash, so ignore the problem. It is better not to delay the inevitable, but immediately turn to professionals or get down to business yourself. To facilitate the task, you should learn about the possible reasons for such a problem and the options for its correction. We will talk about all the recommendations and instructions below.

Why weak rotation?

Before proceeding with active actions, it is necessary to find the root cause of the drum braking. Depending on the nature and scale of the trouble, the tactics and methods of the required repair will be determined. What problems can be?

  • Cracation of the drum. Everything is logical here. if you exceed the maximum allowable loading, then the machine will refuse to rotate the shaft and risk the entire structure. Therefore, it is better to stop the cycle, open the door and remove part of the things.
  • Broken engine. Braking the drum or, on the contrary, sharp acceleration to unprecedented speed often indicate a faulty motor.
  • Electronic board. The output of the electronic unit of the machine will inevitably lead to loss of control over the engine, which in turn will affect the poor rotation of the drum.

It is strictly not recommended to repair, flash or replace the control fee. there is a high risk of spoiling the part finally.

The drum also does not rotate well during the internal closure or damage. This item includes several possible perpetrators at once, therefore, specialists should be engaged in diagnostics and correction. In order to more accurately understand what happened, it is worth conducting an initial diagnosis.

Primary diagnosis

You can determine the nature of the breakdown on its own. It is enough to perform a few simple actions for the initial diagnosis. We are talking about the following procedures:

  • check in the factory instructions, what is the maximum permissible load weight of the machine;
  • Check if the hatch opens, if it is blocked, then the drum is spinning hard due to the clogged garbage filter;
  • hand the drum with your hand, when the container rotates in the off state, and when washing is, it means that the problem is in the tachogenerator, wiring or control board;
  • make sure that an extraneous item was not stuck between the tank and the drum.

Often the LG washing machine with direct drive reacts in braking of the drum with a faulty heating. Modern household appliances thus insureing the system, stopping the operation of the mechanism when failing of any element.

Eliminate jamming

Now you can proceed to eliminate the malfunction. In most cases, it will cope with the replacement of the heater, a jacket or overload can be on its own. You just have to have a user’s guide, pliers, a flashlight and screwdrivers before your eyes. Then we act depending on the nature of the problem.

  • If the heater failed. When the drum slows down and washing does not continue, the heater is to blame. He could burn out, close or explode, and it would not be possible to fix it. only completely replace it with a new. This is done simply: we buy a similar copy, turn off the machine from communications, remove the rear panel, dismantle the old element and install a working one.

When dismantling any part, it is recommended to fix the location of the wiring on the camera to facilitate the reverse assembly and avoid problems with electricity.

  • If the subject is stuck. The drum rotates with difficulty, jerking and knocking? So, an extraneous item got inside the machine. Remove the back cover, take out the heater, and in the vacant place we shine with a flashlight. As soon as the thing is found, we put the hand in the hole and get the culprit.

In cases with a faulty module, burned out wiring or a broken engine with your own hands, do not fix the machine. The help of professionals, otherwise it is likely to aggravate the situation.

Why weak rotation?

Before proceeding with active actions, it is necessary to find the root cause of the drum braking. Depending on the nature and scale of the trouble, the tactics and methods of the required repair will be determined. What problems can be?

  • Cracation of the drum. Everything is logical here. if you exceed the maximum allowable loading, then the machine will refuse to rotate the shaft and risk the entire structure. Therefore, it is better to stop the cycle, open the door and remove part of the things.
  • Broken engine. Braking the drum or, on the contrary, sharp acceleration to unprecedented speed often indicate a faulty motor.
  • Electronic board. The output of the electronic unit of the machine will inevitably lead to loss of control over the engine, which in turn will affect the poor rotation of the drum.

It is strictly not recommended to repair, flash or replace the control fee. there is a high risk of spoiling the part finally.

The drum also does not rotate well during the internal closure or damage. This item includes several possible perpetrators at once, therefore, specialists should be engaged in diagnostics and correction. In order to more accurately understand what happened, it is worth conducting an initial diagnosis.

Spin Not Working | Drum Not Rotating | 6.2kg LG Top Load Fully Automatic Washing Machine| Turbo Drum

Fault prevention

In order for the drum does not stop rotating, adhere to the simple rules of operation of the unit:

  • Stop the operation of the machine if water does not act, extraneous sounds come from it: noise, creak, it buzzes. Invite the master.
  • Do not abuse cleaning and detergents.
  • Emerate small things, folding them in bags. Getting into the drum, they make extraneous sounds: knocking, making noise, car buzzes. There is a danger that the drum will jam and it stops.
  • Lay out clothes evenly in the drum, do not exceed the weight rate so that it does not stop spinning. Come.loaded things create noise, buzz in the car, a drum stop is possible.
  • Hading to wash carefully check if there are small objects in the s of the clothes.

The implementation of the instructions for the operation of the unit will relieve unnecessary financial costs and unforeseen stresses.

Author

Kerariel

| Denial of responsibility | Contacts |RSS