Home Article Replacing the Philips vacuum cleaner bearing
Article

Replacing the Philips vacuum cleaner bearing

PHILIPS vacuum cleaner repair: how to properly repair vacuum cleaners of TRIATHLON 2000, FC9174/01 and FC9170/01? How to disassemble a brush and telescopic pipe? What are the malfunctions?

Dirt may accumulate under the roller brush of your Philips vacuum cleaner. Find out how easy it is to clean it yourself, in this article.

The line of the cleaning household appliances Philips presents the consumer of the devices designed for the implementation of the cleaning method and using the technologies of detergent operations. Among the latter, the following names can be noted:

The functionality of each particular device can determine the list of individual malfunctions, the list of which includes general.purpose breakdowns characteristic of all vacuum cleaners.

The main nodes in which problems may arise:

Peripheral points of breakdowns:

general information

The line of the cleaning household appliances Philips presents the consumer of the devices designed for the implementation of the cleaning method and using the technologies of detergent operations. Among the latter, the following names can be noted:

The functionality of each particular device can determine the list of individual malfunctions, the list of which includes general.purpose breakdowns characteristic of all vacuum cleaners.

The main nodes in which problems may arise:

Peripheral points of breakdowns:

Repair

Engine

Signs of breakdown or other violations of stable operation of the motor are reduced to the following manifestations:

  • uncharacteristic noise: buzz, rattle, whistle and so on;
  • beating, vibration;
  • sparking, smell of melted, smoke;
  • Lack of signs of work.
  • If the vacuum cleaner is under warranty service, contact the nearest representative office ready to carry out repairs or replacement under the contract;
  • When breaking the device, after the end of the guarantee, you can carry out independent repair and maintenance.

Flowing the filter element

A common problem that causes an increase in noise from the vacuum cleaner is the clogging of the filter element, as a result of which the absorption effect worsens. For the device to work in proper mode, the motor takes on additional loads. As a result of the engine operating in the overload mode, frequency indicators of sound are increased. a working vacuum cleaner begins to “howl”. Solution: Clean/rinse filters. ensure a free passage of air flow. If the filter block does not involve such preventive manipulations, it should be replaced.

Some devices are equipped with garbage collection bags. Such bags play the role of filters. Their cleaning and replacement are important components of the vacuum cleaner service, providing long uninterrupted operation.

Interruptions in stable operation of the electric motor

Beat, vibration, extraneous noises in the engine can indicate the failure of its individual parts: bearings, elements of the collector and others. These parts of the motor system are not amenable to “point” repair. If signs are found, replace it with original, purchased from the manufacturer, or appropriate analogues.

Electro.system malfunction

Sparking in the area of ​​the electrical circuit of the vacuum cleaner indicates the presence of a breakdown, which led to a short circuit. The reason for this malfunction is the flow overheating of the wiring that arose as a result of exceeding the permissible load, or the deterioration of the contact characteristics of the compounds.

See also  Dyson v7 parquet extra vacuum cleaner review

Пылесос PHILIPS FS 8608 разборка

Lack of signs of work

This breakdown factor is due to the failure of the engine itself. In this case, the latter must be replaced due to the inappropriateness of its repair.

Deterioration of absorption

If the vacuum cleaner stopped absorbing the garbage, and no interruptions in the operation of the engine and turbine were found, it is worth paying attention to the peripheral parts of the device: telescopic suction, a turbo.shower, corrugated hose.

The elementary cause of violation of suction functions is the entry of oversized garbage into the air duct. The optimal solution is to clean the air channels by separation of collapsible parts:

  • separate the telescopic part of the tube from the hose and brush;
  • check the presence of garbage in it;
  • when detect, remove it;
  • If the tube is clean, repeat manipulations with a corrugated hose.

The most problematic point of the suction system is the turbo. If the garbage is stuck in it, you will have to disassemble the brush in accordance with the manufacturer’s instructions. Most vacuum cleaners have collapsible brushes, which allows for preventive treatment with.

Additional information about faults

The appearance of signs of a particular malfunction may be the result of the influence of another breakdown. For example, deterioration in the throughput of filter elements increases the load on some sections of the electrical circuit of the vacuum cleaner. As a result, negative effects increase the likelihood of other malfunctions. In order to avoid the mutual influence of spoiled nodes, it is worth carrying out preventive/repair work in a timely manner.

It is unacceptable to carry out wet cleaning with a vacuum cleaner not adapted for this. Domestic devices that are not intended for moisture absorption have no engine moisture protection. Such misuse leads to the inevitable failure of the apparatus.

Frequent operation of a vacuum cleaner with a weaved garbage receiver leads to an increase in the load coefficient for all the nodes of the mechanism, including the rubbing parts, which leads to a reduction in the service life of components and the entire apparatus as a whole.

The correct application of the household appliance for cleaning and compliance with the operating instructions will avoid the premature failure of the device and extend its service life.

Repair of the faults of the PHILIPS PowerLife 1900W FC8450/1 vacuum cleaner Watch in the next video.

Any master someday first encountered a situation when when he got to the vacuum cleaner engine, he could not understand how to make it out. And the thing is that the only visible nut that holds the entire structure assembled is not only densely “sits” on a very persistent sealant, but also rotates with the engine rotor!

In no case, do not try to lock the rotor or anchor of the electric motor from scrolling with a screwdriver or other metal object to unscrew the nut. You can damage the engine winding, which you can’t fix it yourself.

Each master has his own “corporate” method of its safe unscruption. We will consider here the simplest of them, which requires a minimum of tools from the home collection “For all occasions”.

Description of the process of disassembling the PHILIPS brand vacuum cleaners

Philips vacuum cleaners are considered a productive and reliable technique. But even they often fail, while creating a lot of troubles. Any breakdown of the vacuum cleaner will lead to a replacement of certain parts, which not everyone can cope with. This article will talk about how to make out the Philips vacuum cleaner, and do repairs with your own hands.

See also  Replacing the bearing of an upright load washing machine

Information malfunction of the firmware scheme reference books Marking of the reduction and abbreviation body frequent questions useful links

reference Information

This block is for those who first got to the pages of our site. The forum considers various issues that arise during the repair of household and industrial equipment. All information provided can be divided into several points:

  • Diagnostics
  • Determination of a malfunction
  • Choosing a repair method
  • Search for spare parts
  • Elimination of the defect
  • Settings

Keep in mind that some malfunctions are not a cause, but by a consequence of another malfunction, or not proper configuration. You will find detailed information in the relevant sections.

philips, vacuum, cleaner, bearing

Malfunctions

All malfunctions for their manifestation can be divided into two types. stable and periodic. The following are most often considered:

About firmware

Most of modern equipment is a semblance of a software and hardware complex. That is, the main processor controls other devices for a program that can be in the processor chip itself and in separate memory microcircuits.

On the site there are sections with firmware (dumps of memory) for microcircuits, or for updating through via inteusions like USB.

  • TV firmware (ordered)
  • Requests for firmware for TV
  • Firmware for monitors
  • Requests of different firmware
  • . and other sections

Equipment schemes

Beginning repairmen are often looking for circuit schemes, connection schemes, user and service instructions. It can be both separate boards (power supply, main boards, panels), or full Service Manual. On the site they are posted in specially designated sections and are available for downloading guests, or after creating an account:

philips, vacuum, cleaner, bearing

Reference books

On the site you can download reference literature on electronic components (reference books, analogues table, SMD-code of elements, and so on.).

Information is available in catalogs, file archives, and individual topics, depending on the types of elements.

How Does a Vacuum Cleaner Work Its Common Failures

philips, vacuum, cleaner, bearing

Marking (marking). designation on electronic components

The modern element base strives for miniature sizes. There are not enough places on the case to apply marking. Therefore, manufacturers mark them SMD codes.

philips, vacuum, cleaner, bearing

Package (case). type of electronic component case

When creating queries in determining the exact name (partynomer) of the component, it is necessary to indicate not only its labeling, but also the type of body. The most common:

  • DIP (Dual in Package). a case with a two.row location of contacts for installation in the holes
  • SOT-89-plastic case for surface installation
  • SOT-23-miniature plastic body for surface installation
  • TO-220-type of installation case (soldering) in holes
  • SOP (Soic, SO). miniature buildings for surface installation (SMD)
  • TSOP (Thin Small Outline Package). a thin case with a reduced distance between the conclusions
  • BGA (Ball Grid Array). a housing for installing the conclusions on the balls from the solder

Brief abbreviations

When submitting information, the forum adopted the use of abbreviations and abbreviations, for example:

Abdone description
LED Light emitting diode. LED (light.emitting diode)
Mosfet METAL OXIDE SEMICONDUCTOR FILED EFFect Transistor. Field transistor with a mop structure
EEPROM Electrically Erasable Programmable Read-toe Memory-an electrically erased memory
EMMC Embeded Multimedia Memory Card. built.in multimedia memory card
LCD Liquid Crystal Display. liquid crystal display (screen)
SCL Serial Clock. I2C integral tire for transmitting a clock signal
SDA Serial Data. I2C integration tire for data exchange
ICSP In-Circuit Serial Programming-Protocol for Intercular Squeezing Programming
IC, I2C Inter-Integrated Circuit is a two-wire data exchange intensity between microcircuits
PCB Printed Circuit Board. printed circuit board
PWM Pulse Width Modulation-latitudinal module
SPI Serial Peripheral Interface Protocol. Protocol
USB Universal Serial Bus. universal consistent tire
DMA Direct Memory Access. a module for reading and recording RAM without using the processor
AC Alternating Current. AC
DC Direct Current. Direct current
FM Frequency Modulation. frequency modulation (World Cup)
AFC Automatic Frequency Control. automatic frequency control

FAQ

After registering an account on the site, you can publish your question or answer existing topics. Participation is absolutely free.

The answer to the theme of the PHILIPS FC 9174 vacuum cleaner how to remove the impeller like all other tips are published by the whole community. Most participants are professional repair masters and specialists in the field of electronics.

See also  The water flow does not work in the Xiaomi vacuum cleaner

The possibility of searching throughout the site and file archive will appear after registration. In the upper right corner, the search form on the site will be displayed.

For any. The most common answers to popular brands are LG, Samsung, Philips, Toshiba, Sony, Panasonic, Xiaomi, Sharp, JVC, DEXP, TCL, HISENSE, and many others, including Chinese models.

With active participation in the forum, additional files and sections will be available to you that are not displayed by guests. schemes, firmware, reference books, repair methods and secrets, typical malfunctions, service information.

useful links

Here are just useful links for masters. References are periodically updated, depending on the demand for topics.

How to remove the impeller from the Philips vacuum cleaner (fastening without a nut)

Thank you very much for the video. Everything turned out in the impeller, though he pierced her a little, the tin itself, but I think not critical. But with a further analysis of the motor, I am stuck. There are no bolts for the promotion of the engine itself, there are 4 rods, as I understand it that they are riveted on both sides. I’m sitting and turning the face, what to do with it next? Or to freak out and drill these riveted pin already and screw the usual bolts there later, all the same, all the masters refused to engage in them, I will unleash it, so I will break it, and suddenly I will subordinate. It will be pleasant in twins. Well, something like this. Maybe someone has come across such glued bolts? thanks in advance.

-in v5m4N4NITY4YYYN3E6CHORZH9SHSHSHSHSHSHSHLLOLLSH R3 6N Tag He

How to remove the impeller from the Philips vacuum cleaner (fastening without a nut)

Thank you very much for the video. Everything turned out in the impeller, though he pierced her a little, the tin itself, but I think not critical. But with a further analysis of the motor, I am stuck. There are no bolts for the promotion of the engine itself, there are 4 rods, as I understand it that they are riveted on both sides. I’m sitting and turning the face, what to do with it next? Or to freak out and drill these riveted pin already and screw the usual bolts there later, all the same, all the masters refused to engage in them, I will unleash it, so I will break it, and suddenly I will subordinate. It will be pleasant in twins. Well, something like this. Maybe someone has come across such glued bolts? thanks in advance.

-in v5m4N4NITY4YYYN3E6CHORZH9SHSHSHSHSHSHSHLLOLLSH R3 6N Tag He

How to remove the impeller from the Philips vacuum cleaner (fastening without a nut)

Thank you very much for the video. Everything turned out in the impeller, though he pierced her a little, the tin itself, but I think not critical. But with a further analysis of the motor, I am stuck. There are no bolts for the promotion of the engine itself, there are 4 rods, as I understand it that they are riveted on both sides. I’m sitting and turning the face, what to do with it next? Or to freak out and drill these riveted pin already and screw the usual bolts there later, all the same, all the masters refused to engage in them, I will unleash it, so I will break it, and suddenly I will subordinate. It will be pleasant in twins. Well, something like this. Maybe someone has come across such glued bolts? thanks in advance.

-in v5m4N4NITY4YYYN3E6CHORZH9SHSHSHSHSHSHSHLLOLLSH R3 6N tag He

Author

Laidred

| Denial of responsibility | Contacts |RSS