Replacing the heating element in the dishwasher Indesite

Contacting a dishwasher replacement

It was necessary to diagnose the computer and clean it. Managed quickly and explained what the problem was. are acceptable. Recommend.

They repaired quickly, the machine was working for us an old washing machine, but it worked without a break for many years. And then she began to ginger, we ourselves could not eliminate the reason and called the master that it turned out to be a bearing, a master.

for the repair services of washing machines

Replacing the heating element in the dishwasher Indesite

The dishwasher is represented by units complex in design, and if they fail, you can fix them yourself if you have previously repaired dishwashers with your own hands. You must be familiar with safety measures when repairing electrical equipment, have the necessary tool, time to study technical documentation and search for the necessary spare parts.

DIY repair, remember your safety!

Dismantle to disable the equipment from the network!

The dishwasher is a holistic system, where incorrect operation or damage to one unit or part entails a consistent violation in the operation of the remaining nodes.

Operational and high.quality work carried out by a professional master guarantee the serviceability of your dishwasher for many years!

• Departure throughout Moscow at a convenient time for you;
• Most of the malfunctions are eliminated in one visit of the master;
• Discussion of the cost of possible repair options;
• Original spare parts from the manufacturer, as well as assistance in the selection of analogues;
• Affordable repair (see. table);
• We tell and show what we are doing;
• Consultations on the proper operation of the machine;
• We draw up a receipt with a contract, an act of delivery and a guarantee (strict reporting form), which will indicate your data, brand and model of a dishwasher, work performed and warranty period.

Possible options for a malfunction, indicative cost of repair and time. you can find out from the master, but it should be noted that even the best specialist will not be able to make an accurate diagnosis by phone.

Call, write to us, and we will always be happy to help!

Device and principle of operation

The heater is an electrical device, heating the liquid built in a spiral of special material. The conductive element is located in a sealed tube, which is isolated from the machine body. The heater is placed in a water shirt, a blade electric pump is used for liquid circulation. The fishing line for the trimmer of the joints is compacted by a rubber gasket that eliminates the ingress of water on the contact elements.

When the electric current passes through the spiral, heat is released, measuring sensors are used to adjust the operation of the heater. The sensor controls the set temperature, when the required value is reached, the heater is disconnected. As soon as the water cools below the programmed threshold, the supply of electricity is resumed. Bosch tubular heaters installed in production machines after 2010., are equipped with additional pumping, which improves fluid circulation and accelerating heat transfer.

Bosch produces running heaters with a tubular element directly in contact with the flow of water.

Dry.type nodes are found on some modifications of dishwashers, which are characterized by the installation of a heating tube in a separate case. The gap between the walls is filled with a thermally stable compound that additionally isolating electrical components from water.

What indicates a breakdown

Signs of breakdown of the heater and elements associated with the device:

• display on the liquid crystal display of the error containing number 09;
• the supply of overheated or cold water due to the breakdown of the thermal regulator;
• the appearance of voltage on the surface of the housing due to the breakdown of the heating element;
• extraneous noise that occurs with wear or breakdown of the built.in pump.

Causes of Ten malfunction in the dishwasher Indesite

Ten cannot be repaired in PMM, to replace the part should contact the certified center.

Service services to replace the heating element in the washing machine Indesite

Replace the heating element in the Indesit washing machine is a standard procedure for our service engineers.

Ten serves to heat water to a certain temperature, which corresponds to the selected washing program. There are usually no problems with the work of this part in the new lubricants, but over time it may fail for a number of reasons.

• The most common reason is the scale, it is formed due to water of increased hardness and salt, which is contained as part of tap water, settling on the heater.
• The surface of the heating element is covered with rust, which is formed due to humidity.
• Short circuit. Sudden voltage surges lead to the fact that the contacts of the parts are burned out. Sometimes even a built.in interference filter, which provides stable power supply of a washing machine, does not cope with this problem.
• Damaged metal heater. Smillly works incorrectly, and most often it “hits” the current.
• Long or active operation smell. Despite the reliability of technology, over time, the details of the machine wear out. The heater of the washing machine Indesite is working intensively, its temperature is constantly changing, so it often fails.

Since the damaged part causes many troubles and unforeseen problems. Tena repair on the Indesit washing machine is best entrusted to experienced engineers.

To eliminate the malfunction, the masters partially disassemble the machine, with the help of the multimeter, check the health of the heating element, replace the burned heater with a new. When installing, they use original spare parts from trusted suppliers.

Procedure for performing work in the Indesit service

• The engineer goes to the place within 30 minutes or delivers equipment to the service center.
• It conducts hardware or software express diagnostics.
• Identifies and eliminates the cause of the malfunction.
• Calculates the cost of work, including the price of spare parts.
• Issues an extended guarantee for servicing the Indesit washing machine for a period of one year from the date of repair, regardless of the type of breakdown.
• Carries out a test launch of the machine to check its performance.

Appeal to the masters of the service Indesite will save your equipment and extend its life.

Step.by.step instructions for prevention

The normal operation of the dishwasher depends on the state of all its nodes. In order to create the necessary working conditions for them, it is necessary to periodically serve the machine and apply prevention measures. Consider them more carefully.

Filters cleaning

Despite the requirement to manually remove food residues from the dishes, a large amount of small organics still penetrates the machine. These particles accumulate in filters, reducing their ability to pass water. Therefore, a periodic inspection and cleaning of filters is required.

Typically, two filters are installed in the PMM. input and drainage. Places of their placement are indicated in the instructions, since the user must periodically clean them.

The extracted filters are cleaned with soap solution or soda, lime plaque can be removed with citric acid. After cleaning, the filters are installed in place.

High.quality household chemicals

The main factor that has a negative effect on the details of the dishwashers is water.

If it is too hard, contains a large amount of suspension and small particles, a lime plaque will appear on the surface of the heater and other nodes.

If cheap household chemicals are used, there is no need to expect high.quality and long.term work. To preserve the performance and increase the service life of the machine, it is necessary to use specialized tools that eliminate lime deposits and contribute to the cleaning of the responsible components of the machine.

The correct mode of operation

To save the machine in normal condition, it is necessary to provide it with the optimal operating mode. This refers not only to the correct choice of the program, but also the frequency of use, the value of the load.

The load standards are indicated in the instructions, they must be strictly observed. The selection of the regime (cycle, programs) is made in accordance with the number of dishes, the degree of pollution, the shape of the items.

Before starting operation, you should carefully study the user’s instructions and learn which programs should be used for certain situations. Competent use of the machine will save it in good condition for many years.

All you need to know about water for a dishwasher will find in this section.

Why does the dishwasher indesit not heat the water?

The software cycle is completed, and the contents of the dishwasher of the indesit remained poorly washed and oily.This suggests that the device does not warm water and you need to look for the source of the problem.

• A tubular electric heater has burned out in the dishwasher (TEN). Due to the stiffness of tap water, a calcified plaque appears on the part, as a result of the heater fails, and the element should be replaced.
• The thermostat broke. The temperature sensor is a vulnerable place for most PMM, including Indesite. To diagnose a malfunction, you need to partially disassemble the dishwasher, so we recommend that you contact experienced craftsmen, and not to repair yourself.
• The control module does not work. If the heating element and thermal attemptor is in order, then you need to check it. Lack of heating is not the only sign of damage to the block, failures occur in the entire device. This problem will also help to solve the Indesite service.

How to repair with your own hands

If there are small malfunctions, the repair of the dishwasher indesit ICD 661 can be done with your own hands.

Replacement of the heating element

Due to the use of hard water, the heating element over time is covered with a scale. The plaque layer increases, the heating element overheats and fails. The breakdown of this part increases the cost of electricity. You can repair this part of the dishwasher as follows:

• The device is disconnected from the power supply network, the water supply crane is blocked;
• the car is turned on the side;
• remove the lower cover;
• inspect the pump (in dishwashers and washing machines, the heating element is connected to this part, before removing the heater, you need to check the condition of the pump);
• replace the pump (if a malfunction is detected by an ohmmeter, the part is replaced);
• disconnect the wiring of the heating element, check the contacts;
• remove the heating element (if the part is covered with a thick layer of plaque, unclench the clamps and disconnect the heater, then turn off the pump and take out the heater from the case);
• replace the pump seal;
• The protruding parts of the heater are treated with grease;
• Install the heater (the removed fixers are replaced with new ones).

Cleaning and replacing the drain pump

If the PMM Indesit DSG 0517 does not drain water, after the completion of the program, check the drain system. For this you need: