Home Small appliances Peel the scale in an electric teapot with soda
Small appliances

Peel the scale in an electric teapot with soda

How to clean a kettle of soda from scale

Teapots have to be regularly cleaned from lime plaque. Scale appears on any devices, the material of the walls does not affect this. Many are interested in how to clean the kettle of soda. an effective tool from scale. There are rules.

This tool is often used to clean the teapots. There are a number of reasons for this:

  • The plaque softens well. If you give a powder to brew for half an hour, all pollution will be removed. To wash them off, it is enough to wash the device with warm water. If necessary, you can walk with a soft sponge.
  • Does not destroy enamel. The coating on the walls will not be damaged, even if the material is very sensitive.
  • Killing bad bacteria. The powder is capable of not only clearing the device, but also disinfect it.
  • Safe. Any remedy for scale must be washed off, but the remaining soda on the walls will not harm the walls.
  • Available. Many at home have a baking soda. Even if it is not, it will not be difficult to buy in the store.

Important! The product can be cleaned by any electric and gas ketters. Since soda does not destroy the material, it can be used for Faor, Fayan, metal and plastic.

How to quickly clean the kettle from scale?. 10 ways

There are different methods for removing the scale from the inner surface of the teapot. But not all of them are effective and harmless. You can easily and quickly clean the kettle from the scale using:

  • Applying professional tools;
  • Using soda;
  • Using vinegar solution;
  • Citric acid;
  • Sweet soda;
  • Seed of conservation;
  • Apple skins;
  • A mixture of vinegar and soda;
  • Lemon;
  • Combination of soda, vinegar and citric acid.

And now let’s take each of the listed methods in more detail.

scale, electric, teapot, soda

Cleaning using professional tools

Special cleansing agents

In stores of household chemicals and supermarkets, special tools are sold to combat a bit. They are quite effective and universal. Therefore, suitable for all types of teapots (enameled, metal, electric). But a good effective tool is expensive. It is recommended to use professional series. The stores represent products of domestic and foreign manufacturers.

Among the best professional tools should be called the following:

  • Sano Antikalk Kettle Descaler;
  • scrap tablets Filtero;
  • Frau Schmidt “Antinosice”;
  • Antinakipine;
  • Cillit “plaque and rust”;
  • Topper.

Instructions for use the manufacturer leads to each drug. You need to clearly fulfill it. As a rule, there are no special differences in the use of funds against scale. They are used according to this algorithm:

  • A purchased tool is placed in the kettle.
  • Water is poured.
  • The kettle is placed on the fire. When the water boils, wait another 30-40 minutes and turn off the stove.
  • Wait for the water to cool and clean it from the residues of the scale.

After such processing, it is recommended to boil water twice in the kettle before it starts to be used.

How to clean a kettle from scale with soda quickly and efficiently?

Cleaning soda

Soda. a popular and universal remedy for cleaning. It is suitable for all types of dummies, including electrical. It gently affects the surface of the device and removes the scale well.

scale, electric, teapot, soda

To clean the kettle with soda, you should adhere to such an algorithm:

  • Boil running clean water in a kettle.
  • Add a tablespoon with a slide of soda in hot water and stir thoroughly.
  • Leave the device for 30 minutes.
  • Pour the soda solution.
  • Repeat the procedure until the desired result is achieved.
  • At the end, wash it well and boil water twice in it.

How to clean a kettle from scale vinegar at home?

Cleaning vinegar

Vinegar, which housewives are usually used in the kitchen, can become a good assistant in the fight against a scale. But it is better not to use it for cleaning electric kettles, since it can damage their internal coating. Vinegar removes the scale well in glass, plastic and metal teapots. This is an effective and budgetary cleaning option.

How to use vinegar to remove scale, described below:

How To Remove Limescale From A Kettle With Lemon | Simple & Cheap Way To Descale Your Kettle

  • Add 100 ml of vinegar to 1 liter of water and stir.
  • Pour the mixture into a kettle.
  • Put a vessel on fire and bring to a boil.
  • Keep on fire until the whole scale is exfoliated.
  • Remove it from the stove.
  • Let the water cool.
  • Wipe the inner surface of the kettle with a sponge to remove plaque pieces.
  • Rinse the device.
  • Boil water in it twice.

How to clean a kettle from scale with citric acid quickly and effectively?

Cleaning with citric acid

Using a conventional lemon, you can quickly remove the scale inside the teapot. This method is suitable for glass, plastic, metal stainless steel devices. It can be used for electric kettle. The plus of the means is that it does not leave an unpleasant odor and taste, does not harm the heating element. What cannot be said about vinegar.

The device cleaning algorithm using citric acid looks like this:

In-depth Electric Kettle Comparison for TEA. Fellow vs. Bonavita vs. Oxo

  • Combine a bag of lemon with a liter of running water and stir.
  • Pour the mixture into the kettle and boil.
  • Leave for half an hour.
  • Rinse the device.
  • Boil water without adding acid and other components.

If the pollution is small, then it will effectively retire. To clean a strong scale, you will have to use a brush.

What is not recommended to do?

Disk heating elements of electric kettles should not be rubbed with abrasive cleaning agents. soda or powders. So you will only harm the device.

For processing the inner surface, it is forbidden to use chemically active detergents. They not only damage the body of the device, but can also fall into food and drink, which is fraught with health problems.

Any cleaning drugs cannot be filled into the body of a boiling kettle. the thermal reaction may be unpredictable. Metal washcloths and brushes for washing teapots are not suitable. they scratch the case of both metal and plastic models.

Important! In the process of washing the kettle, do not forget about the filter located on the nose. On it, too, scale particles accumulate on it, which should be regularly removed.

Remove the scale with soda

The cleaning of the kettle of the scale is based on the use of acids of organic and inorganic origin. The effect of baking soda contributes to softening, loosening of the scale, and in acetic or citric acid it dissolves.

To eliminate the scale on the walls, 1 liter of water is poured into the kettle and a large spoon of soda is poured. The contents are brought to a boil, reduce the fire to a minimum and withstand half an hour with a weak boil. Then the contents of the kettle are poured and pushed clean water to rinse the dishes. After boiling, this water is also removed.

In electric kettle, the scale is easily removed by soda solution. It is brought to a boil and left 2 hours before cooling. Deposits on the walls and spirals during this time soften and easily remove under a stream of water or sponge.

Stainless steel

Practical and durable steel teapots are cleaned using chemical compositions. From folk recipes, options with soda, vinegar, fruit and vegetable purification, soda are suitable.

Light deposits are allowed to be cleaned with a brush, but it is better not to risk and use liquid compounds. The dirt with soda and chips of laundry soap removes the dirt well well. After boiling, the mixture is drained, and the walls are rubbed to a gloss with a sponge.

Remove the scale in an electric kettle with homes

The scale is exposed to various substances, and the practice of cleaning electrical teapots involves both the use of special tools and folk recipes. Active substances allow you to dissolve and delete scheme, some of them are quite affordable, and are sold even in ordinary grocery stores. These include:

You can remove the scale in different ways, and the most harmful for the technique will be a mechanical. Do not try to remove plaque using hard and sharp tools, as this will spoil the device even more. Damage to the body or heating element will be irreversible, and after their appearance it will only remain to get rid of your electric kettle. Do not resort to a mechanical method, when the layer has become very thick, only pre.processing is allowed hard (but not metal) inner surface with a washcloth.

Citric acid

From the permissible tools for cleaning an electric kettle from scale, citric acid is one of the softest. When preparing the composition for processing, it is necessary to dissolve 10 grams of citric acid in a liter of water. It is sold in ordinary grocery stores, usually a package of 25 grams.

To make the calculations more simple, it will be enough to add the contents of one bag into one full kettle. After the finished solution is in an electric kettle, it is necessary to turn it on.

You should not leave the device unattended as soon as the liquid is brought to a boil, it must be turned off, otherwise the boiling water will begin to foam and splash through the top.

After this simple procedure is completed, a hot solution must be left inside for 15 minutes. This time will be enough for the acid to dissolve the scale, or reduces its thickness.

After the procedure, the solution is spilled, it is impossible to use it for other purposes, and the kettle itself is washed so that the remnants of active substances do not fall into tea or coffee in the future. If the layer was too thick, the shoulder removal procedure with citric acid can be repeated.

Under the influence of citric acid, the scale is converted into a loose sediment of gray color, in addition, small pieces of lime in the form of records will be contained in the liquid. As an alternative option, you can use not powder in the store, but the lemons themselves.

For effective processing, it will be enough to place 1-2 lemon inside the device, cutting them with circles. The effectiveness of this method is no less high, at the same time, together with the steam, a strong lemon aroma will break into the room.


The second way to remove the scale from an electric teapot implies the use of vinegar, the people are commonly called a “grandmother” method, if only because it has been used for a very long time.

The initial vinegar was used against scale on copper teapots, however, for modern electric kettle, it may be quite enough. For the procedure, you need a regular 10% solution that is in every kitchen.

  • The electric kettle is filled with two.thirds with water, and the last third must be filled with vinegar.
  • The resulting mixture must be boiled, and then leave the device, and wait until it cools down. During this time, the scale layer should dissolve, or significantly decrease.
  • After the procedure, it must be either repeated, or thoroughly rinse the kettle with hot water several times so that there is no vinegar left on its walls that can spoil the taste of any drink.

Acetic acid is an effective reagent to eliminate scale, due to the chemical reaction into which it enters with salts, the latter are laid out into the simplest substances. For a conventional electric kettle with a volume of one and a half to two liters, two glasses of vinegar will be required. This method has a significant drawback. the smell.

After the procedure in the kitchen, a stable vinegar aroma will reign, which will not seem pleasant to anyone, so you should take care of in advance by ventilation.


If you need to remove very serious pollution, the effect of acetic acid can be supplemented with soda. First, a concentrated soda solution is boiled in an electric kettle, and then immediately fill the technique with vinegar with water (1: 2) in such a volume that the active liquid completely closes the heating element. As a result, a very violent chemical reaction will appear, accompanied by the release of carbon dioxide. Bubbles will begin to form, which will destroy the thick layers of scale.

The method of cleaning the electric kettle with scrap soda, in fact, is not independent, it is used so that soda particles when boiling water are driven into a rally, so that, then, violently reacted with acid, provide mechanical removal on the surface of the heating element through excreable bubbles of carbon dioxide. Two tablespoons of soda will be enough for one liter of water.

Other methods

In addition to three “kitchen” substances, other, quite unusual ways can be used for cleaning:

scale, electric, teapot, soda
  • Brine. The rashes remaining after pickled cucumbers or tomatoes can also be used for this purpose, because it contains citric acid. Boiling an electric kettle with a brine can also be successfully cleaned of plaque, the procedure scheme is exactly the same. pour the brine, boil, wait until it cools down, pour, and wash the capacity. Cucumber brine is also able to eliminate rust.
  • Soda. A fairly unexpected way to clean the dummies from scale. Coca-Cola, Pepsi-Cola, and other similar drinks also help to cope with a bit, since they contain an orthophosphoric acid that can cope even with a rather thick layer of scale. It is not necessary to boil water at all, you just need to leave an electric kettle with soda for several hours. It is important to use only high.quality drinks, since they contain stable dyes that do not remain on the walls. If the kettle is white, then the drink used should not have dye, otherwise you still have to remove the paint.
  • Oxalic acid. This substance is not so often found on the farm, but it is no less effective than the aforementioned funds. If it is not in its pure form, you can use a fresh bunch of freshly cut sorrel. The method of washing the electric kettle is standard, however, in the case of using a fresh plant, you need to wait longer due to a reduced concentration of acid.

Prevention of the appearance of scale

The old truth that the disease is easier to warn, what to do treatment is relevant in the case of a scale. It is much easier not to allow strong lime deposits, to prevent and regularly clean the teapot.

  • use for softening hard water of special filtration systems;
  • in the absence or impossibility of using filters, buy bottled water;
  • Another option is to pre.defend water from the tap in bottles and only then pour it into the kettle;
  • regularly wash the dishes. before boiling and after;
  • About once every two weeks to clean the kettle with the help of improvised means, avoiding the formation of a plaque.

According to experts, simple procedures, regular washing will help to avoid the formation of an old scale. Easy layers and plaque are easier to clean than to use dangerous aggressive compositions.

Especially carefully should be monitored by the electrical appliances, since with a strong plate they fail faster and often are not subject to repair.


I regularly clean the electric kettle with a acetic solution from scale. I use a regular dining room 9% vinegar, dilute with water and boiling. I have a disk model, stainless steel housing. Vinegar cleans excellently and does not need to buy any gels and powders.

Very bad water in the country, so you have to often clean the dishes from scale. Vinegar is the best remedy, suitable for a tender and ordinary enameled teapot for a stove. Small I just soak in a solution of table vinegar, withstand 30-50 minutes. Everything eats off perfectly. Enamelled I clean with a solution, boiling on a stove for 15 minutes. Very pleased.

The use of vinegar to clean the kettle allows you to get rid of even the most old layers, scale. The dishes are transformed, acquires a new look, while the taste of tea improves.



| Denial of responsibility | Contacts |RSS