Home Article Mobile air conditioner how to install an air duct in a window
Article

Mobile air conditioner how to install an air duct in a window

Installation of a mobile floor air conditioner

Installation of a floor air conditioner. In a plastic window with a new solution. This is the insert in the window for the duct of the mobile air conditioner is mounted on the window as well as the net, easily inserted, removed from the window. The design of the transparent screen consists of an aluminum profile, on which a transparent soft glass is installed. which does not crack, does not yellow, with a hole under the corrugation of a mobile air conditioner. The false window is made according to the individual sizes of the window and the diameter of the pipe of the mobile air conditioner. Plastic insert into the window for a split system is complete with fastening. Four mounts are installed on a plastic window. Wooden. Aluminum. Two more additional mounts are installed on the frame itself for the output of the pipe (corrugation) from the mobile air conditioner.

Measured, delivery and installation within the MKAD. 2000 rubles.

Without measurement and installation (pickup) up to 1 m2. 8500 rubles. Over. The area is multiplied by 8500 rubles.

Measurement, delivery and installation within the Moscow Ring Road up to 1 m2. 2000 rubles.

Without measurement and installation (pickup) up to 1 m2. 8500 rubles. Over. The area is multiplied by 8500 rubles.

Measured, delivery and installation within the MKAD. 2000 rubles.

Without measurement and installation (pickup) up to 1 m2. 5500 rubles. Over. The area is multiplied by 5500 rubles.

Measured, delivery and installation within the MKAD. 2000 rubles.

Without measurement and installation (pickup) up to 1 m2. 8500 rubles. Over. The area is multiplied by 8500 rubles.

Frame on a plastic window for a mobile air conditioner made of soft glass and solid glass (plexiglass)

Plastic insert in the window instead of glass

Transparent insert in the window for a mobile air conditioner in the office.

Window insert for a mobile air conditioner on sliding windows made of soft glass

Window frame for a floor air conditioner in an outflow window

Insert in the window for floor split systems for the office, at home

Insert in the window for the floor split systems for the office, at home an excellent solution for the output of a mobile air conditioner out into the window. Easy and convenient in operation. It is made of quality material, safe to use.

Removable transparent frame for a mobile air conditioner.

Heat Wave Special. Can I make a Window AC work as a Portable?

Paul air conditioning insert in a wooden window

Insert on a plastic window with a hole for a mobile air conditioner with a valve.

Deaf insert with a hole for a mobile floor air conditioner.

Insert in a window from a plexiglass under a mobile air conditioner

How to measure a window frame for a mobile air conditioner

All ways to install a mobile air conditioner in a plastic window

One of the optimal ways to significantly lower the temperature in the room in the hot summer is to install a mobile air conditioner. It is available in value, has a number of additional functions and can freely move from one room to another. But at the same time, the question arises of the withdrawal of a corrugated pipe with hot air outside the room.

What is the difficulty?

In almost all apartments and houses, wooden windows were replacements with metal.plastic structures. They are sealed, the sash can open in several modes, and plus to this.do not require special care. However, when buying a mobile air conditioner, it is their positive qualities that are the main obstacle to the installation of a corrugated pipe through which hot air goes. The set for its installation is almost unchanged for each model of a mobile air conditioner. It includes a plastic outlet tip and a case for its fastening on the surface of the window (wall). In wooden windows, it was possible to cut a hole in the corresponding size in the frame, and in the winter, set a plug. However, if plastic windows are installed in the room, this is strictly prohibited. This can lead to the following consequences:

  • Violation of tightness of the entire structure. A sharp drop in heat transfer resistance coefficient will lead to freezing the frame in the winter period.
  • When trying to cut the hole in the double.glazed window, its tightness will also be disturbed. In addition to the appearance of condensate on the windows, this will cause a decrease in the energy.saving characteristics of the structure.

These consequences will lead any changes in the integrity of the window. drilling a frame, a sash or impost, installing a single glass with a hole, instead of a full.fledged double.glazed window, an attempt to make an air channel in a cement screed under a windowsill. But what a way out of this situation? Consider several options for installing a mobile air conditioner in a plastic window.

Open sash

The easiest and hardest way is to take the pipe to the street through an open sash.

However, at the same time, the effectiveness of its work is significantly reduced. some of the chilled air will come out. Along with this, other unpleasant moments will appear. an increase in noise, a large amount of dust, etc.D. This method can only be applicable if it is impossible to make small changes in the window. Most often. this is characteristic of rented apartments, where the owners simply disagree on such a step.

Changing the window configuration

Most of the window structures are divided into 2 parts. the sash and the “deaf”. To install the hose, you can change the appearance of the sash by adding several elements to it.

The design in the lower part is separated by a horizontal impost and instead of a double.glazed window, a sandwich panel is installed. A hole of the desired shape is preliminarily made in it. This method makes it possible to maintain all the characteristics of the structure and at the same time it is possible to quickly connect the outlet pipe for the air conditioner.

However, he has several negative moments:

  • Financial. It is necessary to install impost and replace the old large double.glazed window for a new.
  • Laborious. When the winter period occurs, the sandwich panel with a hole is replaced by a sealed double.glazed window of the same size.

In addition, the appearance of the window structure does not change for the better. the lack of symmetry and a decrease in the light opening.

Installation of plexiglass

One of the optimal ways of installing a mobile air conditioner is the use of a plexiglass as a enclosing and fixing structure.

This will need to perform the following actions:

  • With an open sash, measure the light opening. the distance from the outer parts of the frame and impost. 4 cm is added to the resulting value.
  • According to these sizes, a sheet of organic glass is purchased up to 3 mm thick. It cuts a hole for installing the pipe.
  • A set of mounts for the Anvis grid is purchased. steel corners. They are attached with the help of self.tapping screws so that when taken out through an open window, it is possible to fix them on the wing of the frame and impost. This is clearly shown in the figure with the net.

To improve tightness on the ends of the plexiglass, you can install a tubular rubber seal (as when warming using Swedish technology). And now it is enough to install the resulting structure in the light opening by analogy with the net, fix its position using fasteners and connect the air conditioner air duct. At the same time, it is not necessary to make expensive changes in the design of the window, and before the onset of cold weather the plexiglass is just as simply removed.

Compliance with sanitary standards during the operation of the floor air conditioner

Since both types of a mobile (floor) air conditioner are equipped with a water pallet, a certain observance of sanitary standards during operation is required. Condensation is collected in it, since the drainage tube is not excreted, as is done in the hospital. It also serves as a capacity. Water is pumped into the evaporator using a pump.

Dust and various microorganisms, disputes and cysts can accumulate in the water of the pallet, since there is air access to it. Agree, the environment for their propagation is quite favorable. There were cases when not only dirty water, but also mucus, and a slurry after the valley of water or its pouring, were noticed at the bottom.

It is better not to see the employees of the sanitary station, but you can’t dilute it, therefore, whenever you pour water from the pallet or pour it, process it with a disinfectant indicated in the manufacturer’s instructions or the usual “whiteness” if the pallet is made of stainless steel. After it, rinse it with water. So you will save the necessary norms of sanitary condition.

Installation of a mobile air conditioner without a duct

A mobile air conditioner without a duct is a compact monoblock of a portable type equipped with wheels that simplify the process of moving the device around the room. You can install the unit in any part of the room, the main thing is that there is a socket for connecting to the mains. Do not require installation.

Floor air conditioners with an air duct are installed next to the window through which a corrugated tube is removed.

  • Monoblock is installed on a flat flooring;
  • The window is made in the window for the appropriate diameter for the output of the pipe;
  • The corrugated tube is removed to the street, and its second part is connected to the monoblock;
  • The device connects to the network.

The user remains to set the necessary cooling parameters and start the device into the work.

How to install a portable split system

The external block of the portable split system is installed in any part of the room. The main thing is that other devices that prevent free air circulation are not located near the air conditioning.

The outer unit is installed from the facade part of the house and is attached to special brackets that are included in the equipment of the device. A hole is created in the window frame to remove the tube with a freon connecting two blocks. The installation of a portable split system is best entrusted to experienced specialists from the service center.

Mobile floor air conditioners-an excellent choice for installation in rooms where for some reason there is no way to install wall equipment. Autonomous devices are also convenient for those who live in rented apartments, often moves to another living space or to the country. Mobile devices are easily transported. In addition, such models are somewhat inferior in price to wall split systems. The choice is yours!

Training

Before the installation of a mobile air conditioner, you need to carefully consider the entire action plan and draw a scheme of the most effective placement of the device. Then be sure to consult with professional masters for servicing such systems, showing them their scheme.

mobile, conditioner, install, duct, window

All manufacturers advise installing the product in the immediate vicinity of the window opening, which contributes to the effective and complete air conditioning of the entire room in the established mode.

The most time.consuming work when installing a mobile air conditioner is to make an insert for a window opening right. It is desirable that it does not spoil the external interior of your window. There is an excellent technique using organic glass, which cannot be distinguished from an ordinary glass block at a distance. It is no secret that in glass it is not for everyone to do a round hole, for this you need to have not only experience, but also a special diamond tool that is very expensive.

Important! This stage of training is very responsible, so all measurements are carried out carefully and are checked several times.

The set of the floor air conditioner includes inserts for installation on the window that can be fixed with glue or clamping ring. the second option is much more convenient.

We make an insert with our own hands

We offer a unique insert option that can be transferred from room to room when you need to cool all the rooms until the desired temperature. The whole trick is that for this we will use a standard grid from insects, which is equipped with any type of plastic windows.

  • We carefully remove the grid itself, having previously removed the rubber seal, but only after installing the plexiglass so that the delicate circuit does not bend, we carefully measure the opening and transfer them to the output sheet.
  • We apply the contour of the future window with the help of acute awl, the work is responsible and requires the hardness of the hand. the fishing line for the trimmer should be clear, without repeated lines that will be visible from the outside when installing.
  • You need to cut it on both sides, and then just break off the planned sheet. Now we carefully clean the cut places from irregularities with a mounting knife and a grinding skin.
  • Having determined the installation site of the duct, draw the contour of the required hole. Cutting a round hole is quite difficult, but here an electric chisel is useful to us. The inside is also carefully processed so that there are no burrs.
  • Along the entire perimeter of the leaf fit to the frame, we clean the surface with a rough skin to give it roughness for better gluing, then we degrease and wipe dry with a clean rag.
  • For gluing, we use a special glue or sealant based on external work, so that when exposed to sunlight it does not lose its properties. Gently apply the gluing composition, then apply a chopper sheet on it, press on top of something heavy for clear gluing.
  • After the final drying of the sealant, we turn the resulting structure and remove the grid along with the rubber seal.
  • We carefully insert the seal in the same place, and instead of weak plastic pens, we install more durable, t. to. We will rearrange the entire structure more than once, and it has become a little harder.
  • Install the resulting design and fix it with metal corners for strength and reliability. We attach the duct hose. it turned out a system that does not spoil the appearance of the window either from the inside or outside.

The installation of the floor air conditioner is completed, now you can include the product on the network and enjoy coolness. The whole process can be viewed at

Mobile air conditioning with two air ducts

A variety of mobile floor air conditioners. models with two air ducts equipped with an additional hose for air intake from the street.

The principle of operation and device

On the principle of operation and the installation of a monoblock, air conditioners with two and one air duct are similar.

Advantages and disadvantages

Devices with two air ducts are characterized by some advantages and disadvantages.

Of the minuses: they cost a little more than models with one air duct.

mobile, conditioner, install, duct, window

Such devices are optimal for installation in poorly ventilated rooms.

Mobile air conditioner with heating

The assortment of floor climatic technology also presents models with the function of heating. The heating element is the heating.

The principle of operation and device

Such air conditioners work on the principle of the heat pump. The air flow passes through the heater and, taking the heat, penetrates the room, increasing the temperature. When switching modes, it works for cooling. Equipping a simple control system.

Advantages and disadvantages

Like other types of climatic equipment, floor air conditioners with heating function have their pros and cons of.

  • two working regimes;
  • work at any temperatures on the street;
  • create high.quality heating of the room;
  • consume a relatively small amount of electricity.

Of the minuses: a higher price in comparison with floor models operating only for cooling.

Manufacturers

Almost all manufacturers of climatic equipment can now find options for floor air conditioners with an air duct made in the form of a monoblock. It is quite difficult to determine profitable positions in the store, even based on technical characteristics. However, if you need to find a solution for your office or private house at an affordable price, you can pay attention to the models presented by companies: Electrolux and Ballu.

Electrolux

The assortment presents five series of floor air conditioners with different design and a set of functions. Key differences are performance, reduced noise of the device or the possibility of fine air purification. Selected booklets in specialized stores or a description on the manufacturer’s website will help to choose the best option.

The GEO and ECO series have gained popularity due to its simplicity and reliability in the first case and the improved function of air purification in the second. In the GEO series, Eco Wave, Airgate, Dio you can find models with a performance from 10,000 to 14000 BTU/H, and in the ECO series a model with cooling performance up to 16000 BTU/H with a consumption of only 1.4 kW.

Ballu

An excellent offer at a democratic price is easier to find in the Ballu catalog. Choose from three episodes: Platinum, Smart Electronic, Smart Mechanic. The platinum series is represented by models with a performance of 9,000 to 16,000 BTU/H and a unique design for installation near the wall to occupy a minimum of useful space. Two SMART Series are oriented with the optimal price/quality ratio entirely on mobility. The narrow and long case is easy to transfer to a new place or deployed by directing the stream of cool air in the right direction. Each series features three models with a capacity of 7000 to 12000 btu/h.

Ineffective methods of installation of split systems

The following methods considered are not very good, since the main property of PVC structures suffers-tightness. Among the installation methods of portable air conditioners that are not recommended for use include:

The seemingly simple and effective option should be raised immediately, because this way the air conditioner will work in vain. However, the window can be slightly supplemented, while increasing the effectiveness of the cooling system. To do this, you need to find a plastic plug with a dialing hole in the size of an open area. Putting it in the place of glass, a portable split system will work as it should.

The method is going on the previous, but more effective. Instead of a plug, a narrow plastic insert is used, usually supplied with mobile climatic technique. A corrugated pipe joins the segment. To bring a mobile air conditioner into the window, you need to open it and place the insert in the vertical hole.

Alas, there are minuses here. part of the chilled air leaves the room out through the horizontal cracks of the window opening. Also, such a solution contributes to dust and dirt from the street, a decrease in the soundproofing properties of the PVC focus. With a strong wind, the sash will move, so you will need additional fixation of the insert.

Two of the given methods are good in cases if the user lives in a rented apartment and is not ready to make dramatic changes to the design of the windows. Those who are ready to go to more bold steps, you can use the third method.

From the point of view of the effectiveness of a mobile split system, the method is the most correct-the double-glazed window remains intact, cold air does not get into the apartment, the hole can be sealed with various materials. But the disadvantages are crossed by all the advantages. Firstly, the dismantling of the capital wall of an apartment building is complicated by definition. Secondly, on the facade of the building there may be third-party equipment, which is easy to damage in the manufacture of the hole. If, for example, we are talking about the installation of a system inside the building, which is an architectural monument, the drilling of the hole is excluded. The option is more suitable for owners of small summer houses, especially wooden or built using frame technology.

Effective methods for installing a mobile split system

These methods deserve more attention, since the tightness of PVC systems practically does not suffer. The effectiveness of the process here is understood to maintain the integrity of the structure made of polyvinyl chloride with the exception of the possibility of dismantling the removable elements. Famous methods include:

Some PVC structures (in particular, balcony) are divided by a partition (impost) into 2 parts-transparent and deaf. The second can be slightly modified to insert an adapter for a window for a mobile air conditioner. For this purpose, instead of a double-glazed window below, a sandwich panel is mounted. Previously, a hole is cut in it, the shape of which coincides with the end of the corrugated pipe. The method allows you to maintain the tightness of the system. Some disadvantages (financial costs, the need to replace the sandwich panels is not a double-glazed window when colds occurred) take place, but in general, the method is very effective and in demand among consumers.

Instead of a sandwich panel, it is permissible to use organic glass as a fixing and enclosing structure. Work on the conclusion of a corrugated pipe is reduced to the following stages:

  • Measure the light opening (length from the impost and the outer parts of the frame), add 4 cm to the obtained distance in length and width;
  • prepare a sheet of organic glass with a thickness of up to 3 mm;
  • cut a hole in it to insert the adapter on the window and the subsequent installation of the hose;
  • The glass is fixed on the steel corners for the grid so that when the canvas is taken through the window, it is possible to attach it to the frame and imposte;
  • To increase tightness, it is recommended to glue the rubber seal along the perimeter of the plexiglass;
  • fix the structure by analogy with the grid using mounting elements.

When installing a plexiglass, the user will not have to make expensive changes to the PVC-agency itself, since the element, like the insert into the window for a mobile air conditioner, is easily dismantled when cooling and replaced by a regular glass-packet.

A portable split system is not inferior to wall devices, and the possibility of its independent installation and compactness bribe so many. When the need for cool air disappears, the air conditioner can be hidden until the next summer. In addition, the choice of split systems will save money. The cost of installing a wall analogue is sometimes 10-20% of the cost of the goods, while the installation is necessarily accompanied by dirt, dust, and noise. Having decided to bring the pipe of a mobile air conditioner out into the window with your own hands, the buyer will make the right choice, and the ease of work will once again convince him of this.

Monoblock installation

How to install a portable A/C unit into a casement window

Important! Before turning on the air conditioner, he is obliged to stand vertically at least 3 hours, that is, in his normal condition.

Operation safety

Mobile air conditioners do not carry any increased danger of electricity lesion. If we compare them with household appliances, then in terms of security, they are equated with the refrigerator, even the electric kettle is more dangerous, so you should not be afraid to install the device for these reasons. No permits for installation need to be taken. You don’t even need a separate machine and grounding. It is advisable to buy a chipan outlet instead of the usual. So the possibility of electric shock comes down to almost zero. In some countries, this is already a common occurrence.

mobile, conditioner, install, duct, window

As you can see, the installation of any mobile air conditioners is not so troublesome!

All ways to install a mobile air conditioner in a plastic window

One of the optimal ways to significantly lower the temperature in the room in the hot summer is to install a mobile air conditioner. It is available in value, has a number of additional functions and can freely move from one room to another. But at the same time, the question arises of the withdrawal of a corrugated pipe with hot air outside the room.

What is the difficulty?

It includes a plastic outlet tip and a case for its fastening on the surface of the window (wall). In wooden windows, it was possible to cut a hole in the corresponding size in the frame, and in the winter, set a plug. However, if plastic windows are installed in the room, this is strictly prohibited. This can lead to the following consequences:

  • Violation of tightness of the entire structure. A sharp drop in heat transfer resistance coefficient will lead to freezing the frame in the winter period.
  • When trying to cut the hole in the double.glazed window, its tightness will also be disturbed. In addition to the appearance of condensate on the windows, this will cause a decrease in the energy.saving characteristics of the structure.

These consequences will lead any changes in the integrity of the window. drilling a frame, a sash or impost, installing a single glass with a hole, instead of a full.fledged double.glazed window, an attempt to make an air channel in a cement screed under a windowsill. But what a way out of this situation? Consider several options for installing a mobile air conditioner in a plastic window.

Open sash

However, at the same time, the effectiveness of its work is significantly reduced. some of the chilled air will come out. Along with this, other unpleasant moments will appear. an increase in noise, a large amount of dust, etc.D. This method can only be applicable if it is impossible to make small changes in the window. Most often. this is characteristic of rented apartments, where the owners simply disagree on such a step.

Changing the window configuration

Most of the window structures are divided into 2 parts. the sash and the “deaf”. To install the hose, you can change the appearance of the sash by adding several elements to it.

The design in the lower part is separated by a horizontal impost and instead of a double.glazed window, a sandwich panel is installed. A hole of the desired shape is preliminarily made in it. This method makes it possible to maintain all the characteristics of the structure and at the same time it is possible to quickly connect the outlet pipe for the air conditioner.

However, he has several negative moments:

  • Financial. It is necessary to install impost and replace the old large double.glazed window for a new.
  • Laborious. When the winter period occurs, the sandwich panel with a hole is replaced by a sealed double.glazed window of the same size.

Installation of plexiglass

One of the optimal ways of installing a mobile air conditioner is the use of a plexiglass as a enclosing and fixing structure.

This will need to perform the following actions:

  • With an open sash, measure the light opening. the distance from the outer parts of the frame and impost. 4 cm is added to the resulting value.
  • According to these sizes, a sheet of organic glass is purchased up to 3 mm thick. It cuts a hole for installing the pipe.
  • A set of mounts for the Anvis grid is purchased. steel corners. They are attached with the help of self.tapping screws so that when taken out through an open window, it is possible to fix them on the wing of the frame and impost. This is clearly shown in the figure with the net.

To improve tightness on the ends of the plexiglass, you can install a tubular rubber seal (as when warming using Swedish technology). And now it is enough to install the resulting structure in the light opening by analogy with the net, fix its position using fasteners and connect the air conditioner air duct. At the same time, it is not necessary to make expensive changes in the design of the window, and before the onset of cold weather the plexiglass is just as simply removed.

Necessary tools and devices

Before starting the installation process, it is especially important to make sure that there are all the necessary tools and devices. Some manufacturers include certain parts in the kit, but often some inventory has to be purchased additionally

Items that will be needed during the mounting of the portable air conditioner:

  • measuring tape;
  • marker or pencil;
  • sealing overlay;
  • a saw that is useful in case you need to make some changes to the installation area;
  • nozzle for a pipeline;
  • universal knife;
  • soapy water.

It should be borne in mind that these items are not limited to a possible set of required equipment. If the room is not ventilated through a regular window, additional tools may be needed.

Author

Goltilar

| Denial of responsibility | Contacts |RSS