Is it possible to put a boiler in the bathroom

Installation of a boiler in a private house bathroom

It is common for a person to engage in the arrangement of his home, while he seeks to hide all engineering networks as much as possible. In this connection, with which more and more often the Internet is asked about whether it is possible to put a boiler in the bathroom.

In fact, this conclusion suggests itself at each developer, when determining the option of arranging boilers in a small house or apartment.

In practice, everything does not look so simple. The reason for this is the fact that there are still discrepancies on this issue in some state standards.

In addition, there are established minimum standards for the size of the room, which is the starting point when the decision will be made to install the boiler in the bathroom.

The best place for mounting

Many place a boiler in the bathroom over the toilet or other side surface. Such a choice may entail a decrease in space in the room, complicates the functionality of the room. Nevertheless, the best option for attaching the device will be a place over the bathroom itself or near the shower cabin.

Installation of a water heater in the bathroom

A water heater of any type can be installed in the bathroom, but to remove the water supply to the kitchen. Such a device will be more powerful. In this case, it will be necessary to conduct double wiring. to the bathroom and to the kitchen.

Mount on the wall

DIY water heater installation includes its fastening on the wall. This is a heavy unit. Installation of a boiler on the wall is done only on concrete or brick using anchor bolts.

If the wall crumbles, then the length of the anchor bolt should be larger. First, a hole is drilled in the wall, a plastic component is inserted there, into which the bolts are screwed.

To the walls of foam concrete, foam blocks and other similar materials, not to mention drywall, such devices can be attached only with the help of special additional fasteners.

Connection to water

Boilers are attached to the water supply by means of pipes for hot and cold water. They are painted in traditional colors: blue. connection to cold water, red to hot.

First, the safety valve joins the blue pipe. A check valve is wound on this valve. Then two ball valves are inserted.

All details should be sealed and checked for leakage. To achieve maximum sealing, packley or special FUM tape is used.

It is better to fix the boiler to water pipes with metal.plastic pipes. It is possible on a flexible eyeliner, but it does not always withstand pressure drops and hydraulic boards.

Metal.plastic pipes do not bend, but are connected using fittings. Water connection diagram:

Water connection diagram

Connection to electricity

The water heater installation circuit is designed that the electric cable will be connected directly to the shield. The machine in the shield should be disconnected in case of emergency. A special permit for such a connection is not necessary.

Installation of a water heater for a sink

Installation of different types of heaters is slightly different. Consider the connection schemes and the installation procedure for various water heating structures.

Installation of a unpaired water heater

The easiest way is to install non.pressure boilers. They cannot be connected to a conventional mixer, connected directly to the main pipeline, since the device is not calculated on the network pressure. it can be broken off.

A special mixer for such a boiler has two valves. one regulates the temperature (mixed with cold), the other consumption. In this system, the mixer performs the function of the security group: it blocks cold water at the inlet to the heater and dumps excess water that occurs due to its expansion as a result of heating.

Mixer for non.storage heater

Usually, when buying such a heater, there are tubes and locking valves that are installed at the entrance and exit from the tank. The check valve in this case can not be mounted (due to the lack of risk of pressure jump) or replaced simply with a check valve. The floor heater is simply installed on the floor, and the wall should be fixed to the brackets or other mounts included in the kit. Then the tubes are connected according to the scheme.

Ignoring flow water heater is mounted according to the same principle. We connect the heater to the mains only after filling the water heater with water.

Installation of a pressure storage water heater

Take care in advance about the presence of a socket with a ground contour near the heater. If the heater is wall, mark the hitch point on the wall, drill holes for fasteners, fix the bracket and burn the heater. The floor heater can not be attached to the wall.

We begin the preparation of the water heater. To do this, we perform the following:

• To supply cold water (blue mark on the tank fittings), we mount the check valve in the check valve. The direction of water on the valve is indicated by the arrow.
• On both bark fittings, we screw locking valves. On cold water, the shut.off valve is installed immediately on the valve.

Attention! You do not need to pull the thread too much during installation, you can disrupt!

• We connect a flexible eyeliner to the valves (may be included) or through adapters of metal.plastic (polypropylene) tubes with a diameter of 16–20 mm for connecting to the water supply. The latter method is preferable, since it is more reliable and, in addition, a larger diameter of the pipes provides less hydraulic resistance and better water supply.

Next, we work with the water supply. we mount the tees at the water clearance point after locking cranes (which are at the entrance of the pipes to the apartment):

We connect the hoses (tubes) coming from the tank with the corresponding pipes of hot and cold water. Check that it is the cold to the cold, and hot with hot.

supply of hot water; 2. safety valve; 3. eyeliner; 4. cold water supply

Connect a dropper or siphon for draining into a sewer or a thin pipe for draining to a separate container to the drainage valve pipe.

Before turning on the water heater, redraw the hot water crane on the highway. Connect the electricity only after filling the tank with water.

Installation of a pressure running heater

The installation of a flow water heater is similar to the installation of the heater of the accumulative. The difference is the absence of a reverse safety valve in view of the absence of a tank. For some models, it is recommended to install a filter of rough or thin cleaning and even a softener of water on the supply of cold water. The device is attached to the wall, cut with tubes with shut.off valves into a high and cold water line after network valves and connected to the mains.

supply of hot water; 2. shutter valve; 3. coarse filter; 4. eyeliner; 5. supply of cold water; 6. RCD

Most of the running heaters, especially high power, are not equipped with an electric grinding. It is assumed that the connection of the equipment should go through a selected fishing line for a trimmer directly to a separate machine in an electrical panel. A trimmer fishing line should be grounded, with a short circuit protection device. The cable section is selected depending on the power of the flow boiler.

Installation recommendations

In the process of installing a water heater, it is recommended to use some tips:

• Before installation, it is necessary to block the water supply.
• The device must be placed in an easily accessible place.
• You need to make sure of sufficient power wiring power. The model requires sufficient food.
• It is recommended to prepare pipes in advance.

Necessary tools: peorator, tees, warehouses and divorce keys, locking taps, pasta, screwdriver, airtight tape, metal.plastic pipe, pliers, connecting hoses, bags.

Where is it better to install a boiler and how to do it?

The assortment of stores offers a wide selection of forms of boilers: round, square, oval, etc.D. You can choose not only the technical characteristics of the device, but also the form that organically fits into the interior of the installation site.

The process of installing a water heater can be of two types: temporary installation and constant. Temporary connection is the installation of a shower water heater in the absence of a central water supply. In this case, a flowing water heater is installed, equipped with a watering can and a husak crane. Where to hang a prototype type boiler?. On the wall above the bathroom. A feature of such an installation is the slight weight of the water heater and, therefore, the minimum requirements for the surface on which the wall water heater will be installed. The device is mounted using screws and dowels.

Constant connection is designed to use the heater as the main source of hot water. Such a heater is connected to the water supply system of the room. After which hot water will flow through the mixer.

Volume, L: 80 | Tyn type: dry | Height, mm: 829 | Width, mm: 454 | Depth, mm: 461 | Power Ten, Tue: 2000 |

Mounting

Before installation, you need to carefully study the instructions in order to know how to correctly connect the heater to the water supply network.

Having determined the location of the boiler, it is necessary to mark the points for anchor bolts. The height of the mount line is determined by the fitting of the boiler. A horizontal fishing line for a trimmer is carried out by a marker or pencil. The distance between the points of the mounts is measured between the holes on the bracket from the back of the boiler.

If the wall is laid out with a tile, then the holes on the concrete are first drilled by the holes without the use of the drilling stress mode, and the drilling site is moistened with water. Then the holes are drilled in the main wall where the bolts are inserted. Having fixed the anchor, they hang the drive on them.

The diameter of the drill should be more than the diameters of the anchor bolt and drill, since when drilling the wall through the tile, this cladding will split.

Before connecting to the water supply, it is necessary to study the scheme again. In the new apartment, when planning an intra.apartment water supply network, conclusions can be immediately provided for connecting a boiler, to which it is attached using flexible hoses.

Where is it better to install a boiler and how to do it?

The assortment of stores offers a wide selection of forms of boilers: round, square, oval, etc.D. You can choose not only the technical characteristics of the device, but also the form that organically fits into the interior of the installation site.

The process of installing a water heater can be of two types: temporary installation and constant. Temporary connection is the installation of a shower water heater in the absence of a central water supply. In this case, a flowing water heater is installed, equipped with a watering can and a husak crane. Where to hang a prototype type boiler?. On the wall above the bathroom. A feature of such an installation is the slight weight of the water heater and, therefore, the minimum requirements for the surface on which the wall water heater will be installed. The device is mounted using screws and dowels.

Constant connection is designed to use the heater as the main source of hot water. Such a heater is connected to the water supply system of the room. After which hot water will flow through the mixer.

Features of the model range of boilers. which

In the classification of water heaters, some varieties are distinguished, which differ both in form and the way of placement. Separately release water heaters installed in a horizontal or vertical form.

Horizontal water heater most often has a flat shape. It is placed on the wall above or below, depending on where it is more convenient to connect it to the supply system of cold water. The indisputable advantage of the horizontal option is that it can be placed in the niche of the wall.

20 liters per 1 person the minimum norm for calculating the required volume of the boiler.

Recommendation: Use two.tariff meters of electricity. this will significantly save on water heating, especially if you have a large water heater.

Dry Ten. a heating element protected by a metal flask from water (modern Ten does not contact water). Wet Ten is a classic copper heating, called “wet”, as it contacts a straight line with water (proven for years).

Recommendation: Dry ceramic heater with Steatite technology deserves special attention.

Flat. the depth of the water heater from 24 cm to 35 cm.

Rectangular. rectangular boiler.

Narrow. cylindrical water heater depth and width from 21 cm to 45 cm.

Cylindrical. a classic water heater, forms of “barrel”.

Recommendation: cylindrical. the most optimal in price, and flat are ideal for a small bath.

Until recently, the vertical boiler was most popular. Therefore, everyone knows the answer to the question of where to install a vertical boiler. Typically, such a device was installed above the sink or in the bathroom, on one of the walls. For example, over a washing machine. The vertical installation also has various forms, and if you are not a fan of a rounded cylindrical object, you can always choose a rectangular or square boiler.

Horizontal models differ from vertical characteristics of water movement. Cold water entering the horizontal boiler is mixed with existing hot, thereby lowering its temperature. The optimal water condition is regulated using the mixer. Therefore, this installation option is recommended for rooms in which the ceiling height is insufficient for installing a vertical model.

Floor boiler for 200-300 liters of water is rarely bought for home. Most often. this is the choice of various organizations and enterprises. Where is it better to put a floor boiler? The main placement requirement is the installation near the boiler and the heating system.

Such units are connected to the power supply at 220 or 380 V and operate in single.phase or three.phase mode. Installation and connection are carried out by specialists.

SLIM water heater is columnar installations, thin and elegant, designed for installation in small rooms. In terms of efficiency and other indicators, these devices are not inferior to larger models. Slim water heater will fit perfectly into the kitchen cabinet, which will make the kitchen more elegant. The boiler can be placed directly above or under the mixer in the kitchen.

Water heater for washing is the same device as other models. It can be a prototype or accumulative type, with a tank of 10 to 25 liters. Most often, small models are installed under the sink. To understand which water heater is needed by the sink. it is enough to understand what water consumption will be and how often it will be needed.

Having found out where to put the boiler, it will not be superfluous to remember the technical characteristics of boilers. The most significant parameters are the volume of the tank and the power of the device.

No matter what boiler you choose and wherever it install it. the price of a boiler will become an important factor. As with any other equipment, the most expensive model does not mean that it is the most necessary. When choosing a model, try to comply with the best ratio of price/utility parameters for the selected device.