Home Article How to use the needle threader on a sewing machine

How to use the needle threader on a sewing machine

Easy ways to thread a needle quickly and easily

It would seem that there is nothing easier than threading a needle. But it is not always possible to do it quickly. then the vision fails, then the thread is of poor quality and splits into a hundred hairs, then the ear is too small. However, professional seamstresses know many ways to do this without much effort.

The sewing secrets that mechanics have been hiding from us

There are a lot of nuances and little tips on how to work properly on the sewing machine, as well as how to adjust it with your own hands in case of need. Trouble can wait for us at the most unexpected times, for example, when we urgently need to sew a thing, and some small breakdown happened. 8 interesting sewing secrets that most mechanics know are told in detail below!

Secret: the sewing machine does not move the fabric? There is a simple solution

If the machine does not move the fabric well when sewing, you just need to adjust the cogs. They don’t come out hard enough.

Loosen this screw with an Allen wrench:

Adjust the eccentric and tighten it back.

The secret: the sewing foot is not straight

There is only one screw on the presser foot holder, unscrew it a little and loosen it. Now you can turn the presser foot as you like. Fix it flat and tighten the screw back on.

Secret: The machine doesn’t adjust the needle thread tension correctly

You also need to remove the side panel for this adjustment. You have to loosen the two screws:


Once you remove the thread tensioner, loosen it to zero and check if it is dirty.

If you have cleaned everything and the tension is still bad, then you need to increase the pressure on the spring. Press the plate, screw and release the plate. Increase the spring pressure.

Secret: The machine jumps when it works

It is very easy to adjust this defect. Often the manufacturer puts decorative feet on the back of the machine.

And underneath there are screws to adjust the machine. Just screw it tight and put the feet back on. Now the machine is standing nice and steady!

Secret: Sew on knitted fabric without special needle

An ordinary needle makes a lot of skips on the stretch fabric. To solve the problem, you can lower the needle by 2mm.

The difference of sewing this way is obvious (left. after adjustment).

Secret : what is this hole on the presser foot holder?

This hole is needed to install the guides to help with stitching and embroidery.

How To Use the Super Easy Machine Needle Inserter & Threader

Secret: how to properly use the needle threader sewing machine?

Raise the needle to the highest position, then insert the needle threader itself into the needle for a hook from left to right and that’s it! Needle is threaded.

The secret : low thread tension on the bobbin

Did you know that you can sew and wind the thread on the bobbin on the sewing machine at the same time?? And if your machine is not winding the bobbin tightly, you need to increase the thread tension. For this you need to make a simple adjustment! The machine immediately begins to wind tightly and tightly.

about the secrets of adjustment and current repair of the sewing machine with their own hands see in the video below:

Automatic needle threader. A mini review

Hello. Today is a mini review of a simple but very useful thing. automatic needle threader. As we age, vision is not what it used to be and the action of threading a needle is far from trivial. That’s where the needle threader we’re considering today comes in handy. over, the price of it, more than ridiculous. The price at the beginning of this review is for the lot of three needle threaders. In the mobile app the price is 45 cents for 3 pieces with free shipping. If you’re interested, you’re welcome under the hood.

The untraceable package reached me in 27 days. The needle threaders come in a ziploc bag:

On the plastic, from which the threaddetectors are made, there are castings and burrs, which will not be a problem to remove:

In the hinged part is the threading hook, it is designed for large needles, or sewing machine needles:

On the opposite side, on the right, is the hole of the automatic needle threader where the needle is inserted by the eye:

And into this hole the hook of the needle threader comes out:

To do this, you have to press the spring-loaded button of the needle threader:

Let’s see how it works. For starters, the needle threader for large sewing machine needles and needles.

Put the needle in the groove by the ear, so that the hook of the needle threader would pass into the ear:

Hook the thread and take out the needle:

The thread is inserted in the eye of the needle.

Now let’s see how the automatic needle threader works. Insert the needle with its ear into the hole and press the button:

Getting the thread under the hook and release the key:

To make it clearer, I’ve taken a small

In the end, the needle threader has taken a worthy place in my needlework box.

needle, threader, sewing, machine

How to use the sewing machine needle threader

The need to thread the needle. an eternal problem for needlewomen. And if eyesight is getting weaker, it makes the task impossible. But in other cases it also takes a lot of time and effort. This is where the needle threader will help. It makes it possible to thread the needle very quickly.

How To: Use Sewing Machine Needle Threader (Sewing for Beginners)

Device will fit all types of sewing machines, including those with multiple needles, overlock machines, and regular machines with overlock feet. But before you buy this good device, you need to understand how it works, and you need to know what to look for.

How to thread the machine (upper threading)?

  • The machine comes with three spool cap sizes, so you can choose a spool cap to match the size of spool you’re using with the thread. if the cap is too small for the spool you are using, the thread may get caught in the slot of the spool or the needle may break. Using small bobbins, use bobbin sleeves for easy bobbin threading. For more information on choosing the correct bobbin caps for your chosen thread, see. at. How to wind the bobbin?
  • Follow the instructions carefully when threading the upper thread. Incorrect threading can lead to thread entanglement or needle breakage.
  • Do not use a thread density of 20 or lower.
  • Use the correct needle and thread combination. For the correct needle and thread combinations, see. under. Material, thread and needle combination.

Threading the upper thread

Follow the instructions carefully when threading the upper thread.

The needle threader curtain will open so that the thread can be threaded into the machine.

If the presser foot is not raised, correct threading is not possible.

The needle is fully raised if the mark on the handwheel is on top, as shown in the illustration. Check the handwheel position. If this mark is not in this position, press the button (Needle position) until it is in this position.

Slide the spool onto the spool pin so that the spool is horizontal and the thread unwinds from the front and bottom.

If the cap or spool is incorrectly installed, the thread may become tangled around the rod or the needle may break.

    Lightly holding the thread with your right hand, pull the thread with your left hand and pass it behind the thread guide cover and then forward.

    Thread guide cover
  • If the presser foot is lowered and the curtain is closed, it is not possible to thread the machine. Before threading the machine, the presser foot must be raised to open the curtain. In addition, lift the presser foot and open the curtain before removing the upper thread.
  • This machine is equipped with a window for checking the position of the thread lever. Look through this window to verify that the thread through the needle threader lever is correct.

To make it easier to pass the thread behind the needle threader, hold the thread with your left hand and pull the thread through with your right hand, as shown in the illustration. Make sure that the thread is routed through the thread guide on the needle bar.

Threading the needle

  • The needle threader can be used with sewing machine needles ranging in size from 75/11 to 100/16.
  • You cannot use the needle threader to thread a wing needle or a twin needle.
  • When working with transparent nylon thread or specialty threads, it is not recommended to use a needle threader.
  • If the needle threader cannot be used, refer to the manual needle threader. instructions in the section. Threading the needle manually (without a needle threader).
  • If the thread is pulled out but cannot be trimmed correctly, lower the presser foot lever to lock the thread in place before trimming. If this operation is performed, skip the item.
  • When using thread that unwinds quickly from the spool (such as metallic thread), it may be difficult to thread the needle if the thread is cut. In this case, do not use the thread cutter, but pull out about 80 mm of thread after guiding it through the thread guide discs of the needle threader (marked with “7”).

Turn the handwheel counterclockwise until the needle is at its highest position. The needle is raised to the correct position when the mark on the handwheel is at the top, as shown at. Threading the upper thread.

Do not apply excessive force when pulling the thread. Otherwise, the needle may bend or break.

Threading the needle manually (without the needle threader)

When using specialty thread (transparent nylon thread, etc. п.), wing needle, or twin needle for which the needle threader is not used, thread the needle as described below.

  • Thread the machine until the needle is threaded. For details, see. see. Threading the upper thread.
  • Lower the presser foot.
    Presser foot lever
  • Pass the thread through the eye of the needle from front to back.

Be sure to turn off the power while threading the needle. Otherwise the start button or other button may be pressed accidentally and the machine will start.

The needle threader is automatic

The automatic needle threader may seem like a very important feature of your sewing machine, especially if you are a beginner. This is definitely a very handy sewing machine option, but it’s not required. The needle threader does let you slide the upper thread through the eye of the needle easily, especially the automatic one, but you have to thread through the rest of the thread holders and thread tensioners by hand. Threader only helps you do the last operation of threading the sewing machine. Pulling thread through the tiny eye of the needle.

It would seem that what could be easier, but it all depends on skill, visual acuity, accuracy of movement, and luck. how many attempts you will have to make to thread the needle, especially if you are a beginner? Because of this one operation, sewing machine manufacturers came up with the idea of installing special devices on their products. Automatic needle threaders.

Automatic needle threader

So how does the automatic needle threader work?? Very simple. This device has a hook that is so small that it can pass through the eye of the needle, and therefore, since it is a hook, it can catch the thread and pull it through where it passes itself. Threading thread through a hook is easier than putting it through a tiny hole. Why is an automatic needle threader called automatic? It’s hard to say. Be careful not to break the little hook when using the needle threader. Otherwise you have to use a manual needle threader.

Manual needle threaders

How do you thread the needles and buttonholes of overlock machines?? We rarely sew with just one needle on overlocks, do they have automatic needle threaders for each needle?? No, the needle threader for two or more needles is slightly modified, and is capable of threading all needles. Only on the most modern models of overlock began to appear this option. Consumers, especially beginners, liked it, so manufacturers began to equip home overlocks with it. Automatic needle threaders have not been invented for buttonholes, we thread them with special manual needle threaders for overlock machines. They are similar to conventional needle threaders, but have a slightly longer stem. It should be noted that this needle threader is suitable not only for overlock, but also for any sewing machine.

needle, threader, sewing, machine

Needle threader for overlock machines

needle, threader, sewing, machine

How does the manual needle threader work? very simply. It can be difficult to get the thread through the eyelet because the end of the thread is loose and cannot be threaded through the small hole. The same can’t be said for wire. The manual needle threader has a loop of fine wire that we can easily thread through the eye of the needle. We put the loop through the eye, easily slip our thread through the loop and take the loop out of the ear, pulling the thread behind it.

Sewing machine needle threader: what it is and how to use it?

People whose visual acuity is not one hundred percent, not quite clearly see the details of the end of the thread and the eye of the needle to thread one into the other. But even when a particular person’s vision is all right, he commensurate with their actions, nevertheless, laziness and lack of patience prevents him from threading the needle. That’s where the needle threader comes in.

Features of using an automatic needle threader for sewing machines

There are many useful tools you can use to make sewing both fun and rewarding. These include special feet to ensure straight stitches, tools to correct thread tension, and an automatic threader to make it easier to pull the thread through the eye of the needle.

Threading devices help with hand sewing and machine threading. They are handy for people who can’t see very well. They make sewing easier when you often have to change the color of thread you use.

Sewing “gadgets,” or anything that helps with cutting and sewing

Every needlewoman has her “treasure trove” of scissors. threads. bobbins. rulers. Needles and many other sewing accessories and attachments. designed to help with your favorite hobby.

A small ruler for marking allowances

Allows you to quickly measure and mark the seam allowance and hemming, thanks to the ready-made undercuts on the basic sizes. 1, 1.5, 2, 2.5 and 3 cm. Use this ruler to easily cut askew lines, they come out clearly at a 45° angle.

A ruler with a limiter (runner) is very handy to work with, also suitable for marking and basing allowances.

Ruler for marking with “thread”

Designed for buttonhole marking, notches, and decorative hand stitch marking. Can also be used with chiffon or other fine fabrics. place the ruler under the foot to keep the seam straight and smooth.

Tweezers with a magnifying glass

Allows you to do small jobs, without straining eyesight and without too much effort. remove snares or marks, tuck a thread in the needle

Crayons and marker pens for marking

Chalk wheel with removable/replaceable cartridges, with multi-colored or white bulk chalk perfectly draws a thin and clear line. Colored crayons are best used on the back side of the fabric only.

Aqua marker is great for the same purpose. Most importantly, test any crayon or pencil to see if it will leave a mark after use before you begin.

Alternatively, you can always use a thin washcloth.

A device for going through thick places

Plate for difficult places. an excellent assistant for hemming bottoms in the areas of side seams and tack seams, especially in jeans and products made of dense, thick fabrics.

A circular cutting knife and cutting mat

Used for cutting thin, slippery fabrics such as chiffon and silk. The process of cutting with this method is not simple, and you will have to get used to it. The cutting knife is also used for quilting and patchwork.

With this knife it is necessary to buy a cutting mat (or mat), which is designed to protect the table or any other surface from cuts, as well as to prevent blunting of the blade of the cutting knife disc.


The name of this accessory speaks for itself: “To learn to sew, you must learn to unstitch.”. It is also convenient to cut buttonholes with the rasping tool, having previously placed a “barrier” on both sides of the buttonhole.

Needles for pulling in elastic bands

With their help, you can easily insert a narrow round elastic band or a thin sash into the sleeve. Pull-through needles can also be used instead of the usual pin for elastic banding up to 1 cm wide.

Needle for looping

Very handy tool for turning out buttonholes, wide belts, elastic bands, spaghetti straps, narrow ties.

Spike for turning corners and roundings

With this device the corners of collars, lapels, cuffs, shoulder straps, and rounded areas in the product will always be obtained in perfect shape, without damaged seams when turning out parts in certain places. Corner turner can be purchased on our website in the Burda store.

Pincers for inserting metal fittings

Namely, buttons, eyelets, halter pins. The right diameter nozzles are always included in the packs with the fittings. The device is much safer than wielding a hammer.

Pincers for punching small holes

They can easily pierce holes in very thick and compressed fabrics, as well as in leather, ziguecloth, etc. This method is very convenient for decorative seams outward, made by hand with satin ribbons, leather cords Such a thing is cheapest to buy in construction stores.

Scissors for thin and slippery fabrics

To avoid making a mistake when buying silk scissors, look for the inscription on the blade: “mikro-serration”. These scissors provide precise cutting of chiffon, silk, cambric without displacement of fabric layers in relation to each other.

Toothed wheel and tracing paper

Designed to translate the pattern on tracing paper and fabric. To translate the pattern on the fabric, use the same copying wheel and special Burda copy paper. This method is suitable for all types of fabric, except for transparent, very thin and delicate fabrics.

Boxes for bobbins and threads

Avoid the “no bobbin available” situation with a bobbin case for 28 bobbins. It shows at a glance which bobbins are loose and which colors are present and ready to work. Similar boxes are available for threads. Transparent single sided and double sided.

Tailor pins for silk

Thin and delicate fabrics pins are longer than usual, very thin, with sharp tips and glass heads. These pins leave no marks or snags on delicate silk.

Tailor pins for patchwork and quilting

The pins are thicker, longer and stronger than conventional pins, and do not bend. Tailor pins for quilting are very handy when working with thick, dense and overcoat fabrics.

Magnetic fabric guide

With this device, it is easy to control the width of the seam allowance when sewing with a sewing machine. Place the stop-magnet directly on the needle plate parallel to the foot, at a distance that depends on the width of the desired seam allowance. When sewing, the edge of the fabric runs precisely along the magnetic guide, so that the seam allowances are perfectly straight. Also, this handy device saves time.

Tailor ham, seam roller and ironing pad

All these devices are used for wet-heat treatment at all stages of sewing to give the product a finished look. Tailor’s hammer is used for WTO darts, relief seams, sleeve roundness, collar and other curved seams. And the seam roller allows you to neatly smooth the seams of sleeves, tight pants. They also help you get perfect results because they prevent iron marks from appearing on the front of the finished product.

A small hammer

Used for making thick seams flatter at home. The hammer is used to gently tap the seams of thick and denim fabrics, preferably with a piece of soft fabric. Indispensable tool for seam flattening.

Magnifying glass for the sewing machine

Makes life much easier for the needlewoman. With a magnifying glass, any minor work. removing snares, small stitches, threading the needle with a very narrow eye. will no longer be an inconvenience. And also save your eyes from unnecessary strain. Magnifiers are available stationary, mounted, and backlit.

Needles with a notched eye

If you have poor eyesight, you simply can not do without these needles. Thanks to its eyelet, you can insert the thread into the needle the first time. Thread is securely locked in the eyelet and stays in place throughout the sewing process. Such needles make sense to use in the evening, in low light, saves time and nerves.


Many people neglect this uncomplicated device, and in vain. Thimble will save not only from painful punctures, but also from rough skin on the fingertips. The most important thing. choose a convenient model of thimble for yourself, and you will not be able to do without this little helper.

Sewing machine needle threader

Very handy thing. over, not all sewing machines and overlocks are equipped with automatic needle threader. And manually threading a needle, especially on an overlock machine, can be tricky. Such an accessory will certainly not be superfluous in your sewing box.

Aqua glue marker or a pencil for piecing

Using this marker, you will be able to “mix” fabrics without using a needle and thread. Glue is easily removed with water. But before you switch to this method of sewing parts, try the glue marker on a scrap of fabric you are sewing. Glue can be seen on the fabric, so it is yellow in color, which disappears after drying.

Thread Cutter

These are also called “thread cutters” because of their ease of use. They easily and accurately cut the ends of thread, allowing you to not distract from the sewing process to take a large tailor scissors and they cut threads even in hard to reach areas. They are not too big and will easily fit on the worktop of a sewing machine. When doing manual work, the thread cutter is much more convenient to use than conventional scissors.

And some more sewing tips from BurdaStyle.ru

When choosing thread for sewing, first of all, be guided by the “vagaries” of your machine and the fabric you sew with. Some sewing machines are quite tolerant of ordinary, inexpensive threads of domestic producers. Other patterns, on the other hand, are very picky. For sewing, for example, linen and cotton, you can use lighter threads. But for natural silk it is better to buy quality threads from famous producers. Higher-quality sewing thread is different in price. But it doesn’t tear, it doesn’t stain, and it sews smoothly. To save on the purchase of expensive thread, buy a large spool (1000 m), from which you can wind two or three more small spools yourself. It’s enough thread for your machine or overlock, and it’s certainly enough for more than one garment. There will also be! Special water-soluble threads for marking are very convenient. They dissolve when wet. It’s best to use them when sewing on knitted fabrics. Use an LED sewing machine light as a supplement for good lighting of the working surface of the machine. It gives a powerful light, does not heat, attached to any machine on a double-sided adhesive tape and is very convenient. When choosing an ironing board, pay attention to its surface. Most boards have a featherbed. So that the pattern of the ironing board surface is not imprinted on the fabric, pay attention to the quality of the ironing cover.

How to learn to sew: tips for beginners

And that’s not the whole list of things you need for sewing. The list of accessories for sewing and sewing cannot be exhaustive, because it is regularly updated with the novelties that are suitable for you.



| Denial of responsibility | Contacts |RSS