How to put a spring on the drum of a washing machine?
When replacing the door cuff, users are faced with the need to put a spring on the washing machine drum. It is a spring in not quite the usual sense of the word for us. So called one of the two clamps (internal), which holds the cuff on the tank of the washing machine. Not everyone manages to pull the clamp on the first time and do it correctly. In this article we will try to explain how to do it as simply as possible.
Mounting the outer clamp
On the outside put a clamp on the washing machine rubber band even easier: access to the landing place is absolutely free. The order of operations does not change. Put a spring ring on one side, hook the opposite edge with a screwdriver and tighten it into the grooves provided. The main thing is to carefully check the correct installation, so that the marks on the collar and the body correspond to each other, and the holder fits directly into the recess. The algorithm for the spring type does not change either:
Let us dwell on tightening. Here it is important not to overtighten the bolt, otherwise the threads will be damaged, the clamp will spoil, and you will have to look for a new. Another danger is a possible loss of the ring from the place of planting and the appearance of misalignment. Which will require re-torquing and re-seating.
How easy to put a spring on the washing machine door cuff?
In cases where the screw is hard to turn or constantly comes out, do not try to squeeze the slot, increasing the pressure. You can eliminate the problem by lubricating the threads of fasteners with a universal agent WD-40. It remains a few times to screw in / unscrew the holder to distribute the grease along the entire length, and after. continue tightening.
Independently fix the clamp on the cuff of the washing machine is quite realistic if you follow the given rules and act with the utmost care. It is better to call for help an extra pair of hands and discuss in advance the sequence of repairs.
At this point insert the new lip seal into the prepared grooves. This is the step that will require wit and some effort. Before you pull the sealing rubber onto the lip of the hatch, you need to align the mark on the collar with the mark on the tank. Next, take the seal from the side that faces the tank and insert it in succession with your thumbs. If the lip of the hatch has been treated with soapy water, the insertion process will be easy.
If more than half of the cuff is on, the process will be slightly hampered, because the part already on will slide out of the hatch. Therefore, in order to put on the remaining part, change the principle. Do not tighten the cuff one after the other (in one direction), but insert it from both sides at the same time. After tightening the gasket, check how tight it fits the tank.
To secure the collar, you must put the clamps back on. You have to start with the internal. To put on the spring clamp, be sure to lock it in the starting tensioning point. You can use a screwdriver to do this by inserting it into the hole that locks the hatch. When the spring is put on the screwdriver, stretch the clamp and gradually push it inward around the circumference of the hatch until it clicks into place.
The spring is as complicated to install as the lip seal. Putting the clamp on a little more than halfway changes the tension angle, making further installation difficult. But with a little practice and show some restraint, the inner clamp can be fully put on.
If the washing machine is an older model, you can only tighten the clamp with round pliers. Because older models have no springs or screws for adjustment.
- Put the sealing rubber on the tank, referring to the markings.
- After positioning the seal in place, tuck it inside the drum.
- Unscrew the two screws, remove the door lock by unlocking the connectors.
- Insert a screwdriver into the lock hole
- Carefully put on the inner collar.
- Attach the lock in place.
How To: Samsung Suspension Spring DC61-01257L
The collar for replacement is selected taking into account the serial number of the model of the washing machine! If you have problems dismantling the collar, you can order it remotely, through the online store. The main thing is to accurately specify the serial number of the washing machine and choose only verified sites.
How to change the springs, shock absorbers and dampers in the washing machine
The design of the washing machine includes parts to reduce vibration and shock absorption of the tank. Like all other parts, they do fail over time. And if there is a need to repair or change them, you must first understand their structure. This is where we will begin this article.
- Open the hatch door;
- With your hands, find the two clamps that fix the collar
- Remove both the inner and outer clamp from the appliance;
- “Detach” the front part of the sealing rubber from the housing;
- Wipe the rubber on the outside with a damp cloth.
- Repeat the procedure inside the rubber band. This is where mold often “sits”.
- Moisten a sponge in bleach and wipe the drum all around
- Close the door and leave it for 30 minutes.
- After the procedure, turn on the washing machine to rinse mode.
Press down on the top of the tank and move it 5 to 7 centimeters down. After that, sharply release! The tank should rise up by the springs and stop. If it does not stop, but wiggles up and down like a pendulum, this indicates that the shock absorbers are faulty and need to be replaced.
- Remove the top panel.
- Raise the drum as high as possible and lock it in this position. You can use wooden blocks for fixation.
- Pull the spring toward the tank.
- Take the pliers and unhook the spring from the tank.
- The last thing to do is to disconnect the part from the body of the machine.
Where to look for the concrete block?
To replace the counterweight with your own hands in an Ariston washing machine, you need to know exactly where it is located. Detecting a whole unit or 3 of its parts is not difficult. It requires:
- Turn the machine’s backside toward you;
- Disconnect the top cover;
- Remove the panel located at the back of the washing machine.
All. Now you can visually inspect the counterweight, which may be cracked, split or sagged, and this can lead to instability of the machine and serious malfunctions. Also jerk the stones, and check the fastening of the retainers. It is advisable to perform this inspection every six months as a preventive measure to detect malfunctions and make repairs in good time.
Major breakdowns associated with counterweight failure
Any washing machine brings its owners joy, greatly facilitating domestic work. But every technique can break down, so the owners will immediately have various troubles. In principle, the washing machine Zanussi and other similar modelsdolzhdolzhdenny work without noise. But if a strong noise occurs during the spin cycle, or the drum shudders sharply, then one should immediately suspect a problem with counterweights, as heavy weights help to soften the vibration in good working order. As a result of weakened counterweight fasteners, the load is displaced, causing noise, knocking or humming in the machine during washing and spinning. The cause of intermittent clattering in the machine, which is somewhat muffled by the housing, is often a defect in the counterweight, which is often accompanied by its failure.
What to do if the washing machine makes noise when wringing the laundry
The washing machine has long occupied a full-fledged place in the number of household appliances of primary necessity. As any other technical device, the machine is subject to various malfunctions and breakages. Due to the popularity of the home appliance, the experimental base for self-repair continues to grow.