Home Small appliances How to remove the hose from the samsung vacuum cleaner
Small appliances

How to remove the hose from the samsung vacuum cleaner

How to change the hose on the samsung vacuum cleaner. Vacuum cleaner repair: various types, typical malfunctions and their elimination, subtleties. Vacuum cleaner hose algorithm

Today it is unlikely that it will be possible to find a family whose house there is no vacuum cleaner. This indispensable assistant has become almost the main household appliance, and the choice of its technical characteristics and quality must be approached with the knowledge of the matter. But, no matter how regrettable, no matter what the famous manufacturer this apparatus is, weakness to the breakdown of details is present in all promoted brands. Unfortunately, the flexibility of the hoses, even from the most durable materials, is not unlimited. And noticing the gap in the places where it bends, the question arises: is it possible to repair the vacuum cleaner hose with your own hands? Let’s look at how it can be done.

How to get rid of an unpleasant odorless smell?

Ways to get rid of unpleasant odors in a bag for a vacuum cleaner, you can put a little washing powder. then during operation the vacuum cleaner will make a fresh smell. There are also special deodorants for the vacuum cleaner on sale, or you can use ordinary essential oil, which must be drunk inside the bag.

Cleaning a corrugated hose from the pool from the inside

  • To clean the hose, you will need a kettle with warm water, citric acid, a few drops of Fairy, a hose (with water) and another accessory that you can easily do in a few minutes
  • First, pour the hoses with a warm solution of citric acid and lead them somewhere for an hour and a half, as depicted on

    Electrical circuit circuit of a vacuum cleaner with power adjustment

    R3 sets the maximum power of the vacuum cleaner, it can be changed within 12-47 kOhm. VR1. operational power adjustment, and VR2 is set its minimum value, and here you need to be careful. The fact is that, if the motor anchor stops, each half-period of the network voltage through it will flow through a starting current equal to 3-5 workers, and an expensive powerful simistor (TRIAC according to the scheme) will burn

    Therefore, when setting up the VR2 engine, they are first put on minimal resistance, then they give a voltage of 175 V and VR2 very carefully, without re-regulation, reduce the engine speed to 700-800 rpm

    Thermal protection in this scheme is also easy: parallel C3, the thermoresistor is connected to 1-1.5 MOM (for the voltage of the network 220 V) with a drawn logarithmic temperature characteristic. Physically the thermoresistor should be in thermal contact in the motor body, but be electrically isolated from it. The “cold” thermoresistor (at room temperature) does not affect the work of the circuit, but when heated to 70-80 degrees, its resistance will fall to 1-0.5 R3, C3 will be charged more slowly during the half-power of the Diac Simistor and open the TRIAC later. and the power of the motor will slowly drop. In approximately the same way, it is possible to finalize most vacuum cleaners with power adjustment, but without protective automation.

    How to wash a vacuum cleaner?

    Cleaning a vacuum cleaner may include wet cleaning elements. This demonstrates the following instruction:

    • Put on light, free clothes that you are not afraid to lick.
    • Disconnect the device from the network, wipe its body with a slightly damp cloth.
    • Remove the vacuum cleaner, delete the contents, wash it.
    • Some models do not have a vacuum cleaner, but are equipped with a special container, which also needs to be devastated, washed, dried.
    • If your vacuum cleaner has an aquafilter, do not neglect cleaning after each use. Such filters love a lot of attention to care.
    • Washing vacuum cleaners can be cleaned by lowering the hose with a nozzle, turning on the device to the network for 7-10 minutes, after which the device must be dried.
    • At the last stage, the brush is cleaned, other external details of the device.

    Important! The cleanliness and order of the home is completely dependent on the organization of cleaning. In order for coziness to always reign in your apartment, and the surfaces sparkle with cleanliness, look at another article where it is described in detail how to organize cleaning.

    The most common malfunctions

    If there is no way to give a vacuum cleaner to the master for disassembling and evaluating his condition, you can find out what you need to pay attention to in case of malfunction. After the problems appear, the bearings are first checked, which helps to work the engine

    A specialist can quickly determine the problem of a vacuum cleaner breakdown.

    remove, hose, samsung, vacuum

    The sound that is characteristic of them: a sharp hum, roar, burning, overheating of the body. In addition to them, they pay attention to the anchor and the brush of the motor. A common problem. the hose does not draw pollution.

    In vacuum cleaners, the hose often grinds.

    The reason may lie in the clutter of the hose, a crowded bag for collecting dust or a problem was a problem. Often there is a problem when the unit pulls air, but the garbage is not removed normally. The problem can be in a worn brush or impaired position of the roller.

    Как разобрать SAMSUNG пылесос.disassemble Samsung vacuum cleaner

    Motor breakdown is a serious problem.

    If the technique does not turn on, and the electricity does not disappear, then the reason lies in: triggering protection against overheating or malfunction of the power circuit, fork, wires, internal wires silt of the rod in the switch itself.If the problem occurs with electronics, it is better to entrust this business to a professional.

    Only in a professional service center they will quickly fix the vacuum cleaner.

    The indicator of this lies in the fact that during operation they found smoke, knocking out traffic jams, short circuits. This all suggests that the problem is focused on the closure inside the device. And frequent problems with the sparkling of the collector lead to rapid wear of the device.

    Use drawings to analyze the vacuum cleaner.

    general characteristics

    Samsung is a brand that does not need to be presented. Each category of its goods is very diverse. And vacuum cleaners are no exception.

    Despite this, almost all models of this household appliance have a similar line: their hoses have a corrugated surface. Their structure facilitates operation and allows you to maintain the integrity of the product. Corporal during operation provides flexibility and smoothness of movement.

    Typically, hoses are made of 2 types of material: polypropylene and rubber. But in its pure form they are quite fragile and are able to break under the slightest effect.

    remove, hose, samsung, vacuum

    Therefore, a reinforced corrugation would be an ideal option. It is reinforced with a metal frame, synthetic thread or special textiles. This feature gives the hose, on the one hand, strength, and on the other, flexibility, protects against overstretching and excessive compression and increases its operational characteristics.

    Samsung Vaccum SC4130 Red | Unboxing English

    All hoses for a vacuum cleaner are conditionally divided into 3 groups:

    • universal. suitable for ordinary dry cleaning;
    • Detergents. provide not only dry, but also wet cleaning (for this they have special additions, fixed on the hose using fasteners);
    • Special Schools. with a special purpose.

    As a rule, in everyday life we ​​use the first 2 types.

    Flexible Samsung vacuum cleaner hoses differ in length and diameter. The average length of the corrugation is 1.5–1.7 m. Such parameters provide a sufficient area of ​​action and do not burden the cleaning with a long naughty hose.

    The diameter of the product ranges from 3.2–3.7 cm. This is an important characteristic, since the power of the vacuum cleaner depends on it. The smaller it is, the higher the absorption force of the device.

    If necessary, the change of the hose to this part directs special attention. The new corrugation is obliged to have an identical section. The same goes for its length. If you change the parameters when replacing the hose, this will most likely affect the work of the device, because its power is directly dependent on the size of the tube.

    Before the device is released on the consumer market, it is subjected to a number of research, including its hose. For him, an average of 5,000 test cycles are carried out. Each cycle consists of 5 scrolling to the right and left. The strength of the product, its compounds with other parts of the vacuum cleaner are evaluated.

    remove, hose, samsung, vacuum

    Preparatory stage of disassembly of the vacuum cleaner Samsung

    You can notice trouble if you use the technique for some time. You know what sound characteristic of your Samsung and the smallest changes in it or in the work of the device will be noticeable to you.

    The breakdown of many details will carry financial problems.

    The broken engine in the vacuum cleaner is noticeable by: intermittent sounds, throws off dust, smells of burning. If there is no way to give to the master, then the disassembly of the Samsung 1800 W vacuum cleaner with your own hands Video and the photo will be assistants.

    What tools will be needed

    You need to clean the bag from dust or change it? Special devices and skills do not need. They are needed in cases of problems with the engine, wires, elements of the board. They will be:

    • file;
    • awl;
    • pliers;
    • sandpaper;
    • vise;
    • Construction knife;
    • Spare connectors and wiring.

    Use a vacuum cleaner disassembly tools. In cases of replacing small details, you will not have to spend much. But to replace a large and expensive component, you can pay attention to the alternative. With the condition of the good material from which it is made.

    How a hose is arranged

    The duration of the vacuum cleaner and ease of use depends on the operational characteristics of the sleeve. The length of the plastic spiral varies, depending on the model, from 1.5 to 2 meters. The absorption power depends on the diameter of the sleeve: inversely proportional dependence. All working elements have two identical structural elements: an adapter, to fix the elongating rod, and the castle, to connect with the unit. The functional features of the hose depend on what material it is made and the purpose of the vacuum cleaner.

    • Universal models:
    • from thin.walled frameless corrugation;
    • hard frameless plastic;
    • flexible corrugation with a metal braid.
    • For washing vacuum cleaners.

    Ribbed tubes of detergents are additionally equipped with rubber tubes for water supply.

    Other features

    The vacuum cleaner hose from one edge is equipped with a tip to connect with the device case, or rather, with a vacuumber. On the other hand, there is a mount for connecting with a metal tube.

    The hose is connected with the pipe by means of the handle. She plays the role of not only the holder. In separate models of vacuum cleaners, such as Samsung VC21K5136VB, the handle also acts as a regulator. On its surface there are buttons with which you can turn on the device and choose power without being distracted from work.

    In other models on the handle there is a power regulator in the form of a hole with a latch. The larger it is, the less power.

    With the help of a rotary mechanism located on the border of the hose with a handle, they manage in different directions. In a number of devices, such a mechanism is capable of scrolling at 360 °, which allows maneuvers to make brushes even in hard.to.reach places and protects the hose from an excess.

    Separately, it is worth saying about the hoses for washing vacuum cleaners. Given that such models are able to produce both dry and wet cleaning, a tube for water is additionally attached to their corrugation, as well as the trigger that supplies it. They are fixed to the hose using special locks.

Author

Kerariel

| Denial of responsibility | Contacts |RSS