How to remove the back of the LG fridge
Good afternoon If you need to remove the back of the LG fridge then know that you have to do it very carefully, because there are very fragile plastic, if you apply too much, excessive force it can break, you must carefully remove without breaking the latches, so use your force wisely. Do not forget that you first need to unscrew the screws that secure this cover, for this you will need, a Phillips screwdriver of medium size, nothing else is needed to perform this task
Hello Hello If you need to remove the back of the LG refrigerator you know that you need to do it very carefully, because there are very fragile plastic, if you apply too much, excessive force it can break, you must carefully remove without breaking the latches, so use your force wisely. Don’t forget What you need to start by unscrewing the bolts that hold this cover in place, you will need, a medium sized Phillips screwdriver, nothing else will be needed to accomplish this task
PCB assembly from 30 FREE shipping worldwide stencil
How to remove the back of LG refrigerator
_ Don’t get in the way! С.” Why does it take God so long to give us a helping hand? And the scary part: maybe it’s holding out, but we’re getting longer and longer without noticing it?”
Sign up and get two coupons for 5 each:https://jlcpcb.com/cwc
PCB assembly from 30 FREE shipping worldwide stencil
When replacing in a modern car electromechanical relays on the intelligent power switches PROFET made by Infineon, you should consider the peculiarities of their switching in comparison with “dry contacts” relays, as well as the characteristics of management with their help different types of loads.
Webinar focuses on the design and integration of Quectel’s built-in and external antennas for cellular modems, navigation and 2.4 GHz data devices. This webinar will introduce you to the product line and how to solve design problems. On the program: antenna type selection; key issues affecting antenna performance; OTA certification requirements; practical measurement of antenna parameters.
_ Don’t get in the way! С.” Why does it take God so long to give us a helping hand? And the scariest part: maybe it’s holding out, but we’re getting longer and longer without noticing it?”
Who is on this forum now
This forum is currently being viewed by: no registered users and guests: 6
How to remove glass from an LG refrigerator shelf
LG GA-E489ZAQZ refrigerator. Guys help. Put meat in the vegetable drawer overnight and it leaked. Blood leaked between the slots and got into the hollows in the front wall of the box, and from there to the shelf below.glass. The cracks are all bloody. I’ve washed everything, and I can’t get the blood out of the cracks. Now it stinks in the fridge. The second day I have a shelf and drawer soaked in the bathtub, but it does not help. Question. how do you remove the front wall of the drawer to clean it?? There’s a latch, but I can’t figure out how to unhook it without breaking it. And how do I remove the glass from the shelf without breaking the plastic fasteners?? That’s a pain in the ass.
http://s018.radikal.ru/i507/1612/00/b43f7600fd89.jpg http://s018.radikal.ru/i508/1612/78/61e4fdb8492d.jpg http://s018.radikal.ru/i523/1612/d6/d2198a15592a.jpg http://s015.radikal.ru/i332/1612/3c/79e025887951.jpg
And there’s no dishwasher in the house? And a car wash like a scrubber, so you can try to get it out through the cracks?
Horrible construction, I agree completely. Almost everything can leak and almost always. Even vegetables. And in doing so, the box will be hopelessly ruined? This is ridiculous. There are several refrigerators in the house and none have drawers that are not airtight on the bottom side. Not for vegetables or anything else.
I would break the two shelf holders (in the photo in the foreground). If you really need it, you can glue it back on. Although their absence can hardly be a reason to refuse warranty repairs (if found at all).
Nope, that won’t work. If you break off two holders, then there is a plastic rim and it will not let the glass slide out completely (see the first photo, bottom right corner. you can see the rim and the glass is against it) Bastards designers. I bought peroxide, make a small hole with a thin knife, and pour it in. Then a strong jet of the shower hose (I removed the watering can) wash out into this tiny hole. It’s much better now, but it’s not completely gone. The same dance with tambourine and around the box.
Maybe the rectangular bar that the glass is pressed against is malleable and can be bent to move the glass. And the shoulder can be cut off. You would get a split design. Wouldn’t have to bother with cleaning in the future.
The plastic construction is well made, pressed to the glass like glue. you can’t get between it and the glass. The rectangular bar is also seriously made. The rim is cut off. It’s like? Plastic is not flimsy and it needs a special tool, and capable hands. Т.ч. while I wash it out with peroxide. I already remembered all their mothers while I was washing them.
How to wash the glass shelf in the middle of the refrigerator above the fruit shelves, there’s a plastic plate that doesn’t slide out or remove, but moves?
How to wash the glass shelf in the middle of the refrigerator above the fruit shelves there
How to wash the glass shelf in the middle of the refrigerator above the fruit shelves, there’s a plastic plate that doesn’t slide out or remove, but it moves?
Open the door harder and pull the shelf toward you, if not removed just wipe it in place without removing it
Sergei, I pulled the shelf out of the fridge, but under the glass in the assembly together there is also a plastic plate that does not move to wash this whole glass shelf?
customer service. This will save time and money. This list
REMOVING AND INSTALLING THE DRAWERS IN THE FREEZER COMPARTMENT.
Food Storage, Ice Maker Tip, Note
If ice cubes are needed, as early as possible,
Cold air circulation allows
or other products that require rigorous
RECOMMENDATIONS FOR STORING FOOD
Cleaning, General Information, Caution
Power Failure:Power failure for 1
refrigerator legs, wrap them against the
during loading and unloading the cooler
BEFORE INPUTING:If transporting the refrigerator
Refrigerant circulating inside the system
Cooling, may gurgle softly, even
Don’t worry, it’s perfectly normal. В
During the operation of the refrigerator there may be
Careful, note the overhang of the doors
COLD TUBE: the anti-condensation tube is laid
In these places, the refrigerator can strongly
get hot, especially right after the first
to the left, depending on the layout of your
Install bottom door hinge.
Before you call for repair service, read this section.
Before calling for service, read this section or call
customer support. This will save time and money. This list includes
yourself the most common cases that are not the result of poor
The quality of assembly or poor quality materials used in this appliance.
Check the power supply. Make contact between plug and
socket. See. Page. 5 “When connected to the power supply
It is necessary to check whether the plug is tightly inserted into the socket.
Contact your dealer or authorized service center.
Refrigerator is positioned too close to the source
Refrigerator doors open frequently or
Do not leave them closed for a long time.
LG Signature Refrigerator. How to Remove and Attach Shelves, Drawers, and Bins
Compartment doors are not closed tightly.
See. Troubleshooting (Door does not
Refrigerator stands on the floor in an unstable position.
Adjust its position with the adjustable
Refrigerator is touching the surrounding objects.
Doors were not closed tightly or food is in the way
Doors open too often and for too long.
Frosting inside the food container is normal
Food hindering the closing of the door.
Move the food that is preventing the door from closing.
Tighten adjustable legs. The location where the refrigerator is installed
The place where the fridge is installed can be uneven. Using
Adjustable legs Lift the front of the refrigerator
Carefully remove debris from the rubber
Incorrectly moved doors.
The quick freeze function is on.
See. See “Operation” (Quick freeze).
Refrigerator is close to a heat source.
Fridge doors are often opened or left
Not closed for an extended period of time.
Compartment doors are not closed tightly.
See. Troubleshooting section (Door
Conditions of warranty, Disposal of old refrigerator, Note
See Warranty terms and conditions. in the warranty card.THE WARRANTY DOES NOT EXCLUDE: customer complaints that arise during the
In the case of deviations from the State
For more information on servicing and using your refrigerator, see
You can find all the plastic covers on the official LG website in the “Frequently Asked Questions” section
How to re-hang a refrigerator door?
Most of the modern refrigeration units are equipped with additional holes in order to move the door of the appliance to the opposite side. often than not, refrigerators with a right-hand opening mechanism are found on store shelves, but in our case, it is exceptional. So how do you figure out why people try so hard to “poach” the door to the other side?
- One of the main reasons why the appliance is subjected to modernization, is the small space of the kitchen, its layout. You have to agree that modern big refrigerators will hardly fit into a small “khrushchevka”?! But even if the equipment has to fit, the appliance door will still need to be re-hung to the other side.
- The second reason can be called a loose fit of the door to the body of the equipment. Without a proper solution, this kind of situation will easily turn into a real tragedy when you see that your refrigerator is not functioning. Therefore, some owners, sharply arises
- What else could affect such a decision? As strange as it may sound, but the physiological features of the body, too, can make a contribution. So, for example, left-handed people are not comfortable opening a door with a right-handed locking mechanism.
- The need to change the design of the refrigerator door.
At its core, refrigeration door upgrades are not very much of a complicated job.
- First, you can call a service center and call a specialist to the house. But, there are nuances. If you have a warranty card, you can call a master only once a year. Therefore, you should take into account the fact that in case of more serious malfunctions, the next time you will not get help at the expense of the service.
- Secondly, you have the possibility of replacing the door yourself. This is not difficult and will not require any special knowledge or skills.
What you need to know?
If you are not afraid of the various difficulties and problems that arise along the way, then please prepare and arm yourself with the necessary items.
In order to re-hang the door, you will need:
It is necessary to defrost the refrigeration equipment and unplug it. Remove from a door all magnets and small subjects.
- First, you should make sure that your refrigerator has the ability to move the door. As mentioned above, more and more modern models are equipped with this function. How to discover it? Very easy, look at the end of the equipment, the manufacturer has usually already left the holes covered with plugs. All you need to do is remove the plugs with a knife or screwdriver.
- Next, remove any fasteners that hold the door base of the refrigerator. Then, pressing the door to the body, unscrew the other screws with a screwdriver. Then carefully set the door on a flat surface or on the floor.
- After that, carefully remove the pivot hinges and install the plugs in their places. Next, gradually drag the hinges to the opposite side. Try to do it carefully. In no case do not touch the small parts in the design of the hinges, otherwise the normal operation of the refrigerating door is not guaranteed!
- After that, you will only have to screw the door to the body of the refrigerator. It is better to start screwing from the top hinge to avoid different breakages. Tighten the pivot hinges securely.
- Install the door handle on the opposite side.
Please pay close attention! Different models have different ways of fixing and attaching. On certain models, along with the suspension of the door, you will have to move the opening sensor. For such models are also adapted special fixing holes for sensors. With some models you may need additional items to install the door, usually all the necessary parts you will find in the package with instructions.
The refrigerators with electronic display present a great difficulty. At replacement of a refrigerating door at such samples it is possible you need to move wires for the display.
If you are not sure if the door is set correctly, then immediately you should contact the service center. Since the wrong door, can be source of penetration of warm air, which will require increased operation of the compressor. In turn, the constant operation of the compressor can disable the entire refrigerator.
In the process of replacing the refrigerator door, tilt the refrigerator back a little with the help of guide supports. Such a simple “trick”, will help to better secure the door in the body of the refrigerator.
Summarizing all aforesaid it is necessary to tell. If your cooling equipment is under warranty, it is better to refrain from self-repair and call a specialist. The warranty card, it is for the fact and warranty that in a more complicated breakage, you will be provided with the qualified help. If the warranty period has passed, then there is nothing that prevents you to try yourself as a refrigerator repairman.
How to rearrange the door of the refrigerator to the other side independently
In some situations, it may be necessary to re-hang the refrigerator door. In many models of cold storage rooms it is not possible to do this, which is better to know in advance. The whole process is easy to do yourself, you just need to figure out if and how to re-hang the door of the refrigerator.
What tools do you need to move the door to the other side?
To re-hang the door, it is necessary to prepare a set of tools:
- Wrenches. Their type depends on the refrigerator model. In most cases, you use a socket and horn wrench.
- Screwdrivers. You may need a flat or Phillips head tool.
- Painting tape. Necessary to fix the sash and prevent it from falling during disassembly.
- Trowel or knife to pick up the plugs.
You can also use the spare hinges, nuts and bolts that come with the appliances.
Why do you need to turn the door to the other side?
Installing the refrigerator door on the opposite side of the enclosure is required for the following reasons:
- Changing the interior of the kitchen. In the space that the refrigerator takes up in the new layout, there is no way to freely open the door.
- Door not closing properly. In such a situation, you need to move the door more quickly, because through the gap between it and the body inside the refrigerating chamber warm air enters. It causes the temperature inside the fridge to rise, and the compressor has to work at twice the normal load to compensate for the temperature difference. When you recycle like this, the equipment will fail quickly. Sometimes it is not necessary to change the door; it is sufficient to check the gasket.
- If it is too worn out, dirty, or deformed, it must first be replaced.
- You are left-handed. It is more convenient for the left-handed people to open the door from the right.
Before you start work, you should check if the manufacturer has made this option available. This information is listed in the refrigerator manual. If it is lost, you need to inspect the refrigerator door.
When there are technical openings on the opposite side from the hinges, change the door opening to the opposite side. If there are no holes for hinges, then the model is not intended for this.
At the preparatory stage, you need to do the following:
All the food from the chamber.
- Disconnect the fridge from the network and let it defrost.
- Move the appliance away from the wall and furniture.
- Take out the drawers and shelves, especially the glass ones.
- Remove the magnets.
When re-hanging, do not allow the unit to tip over or place it on the back wall. This can cause the compressor to break.
During the work of re-hanging the refrigerator compartment door, use the hinges:
- wrench, screwdriver,
- use a knife or spatula to remove the decorative plugs,
- With duct tape for painting work,
- sheet of paper.
To move the refrigerator door to the other side, use the following algorithm:
- After unplugging the unit, take painter’s tape and secure the door to the side so as to prevent it from falling during removal.
- Using a knife or a spatula, remove the plugs from the technical holes.
- Unscrew the bolts and take out the hinge fasteners. If you can not get the hinge, you need to remove the entire top panel. The door is held from the bottom so it doesn’t get deformed. In this position, unscrew the bolts of the bottom hinge.
- In some models of refrigerators, you can remove the door by lifting it slightly.
- If the kit did not include spare parts when purchased, use the same parts on the other side.
- Swap the plugs from the fixing holes, shifting them from the left side to the right one. Mirror the hinges.
- Reassembly is carried out in the reverse order, but from the other side.
- If the refrigerator has two chambers, the same process is carried out with each door in turn.
- The last step is to check the tightness of the gasket. First check the gasket visually for gaps and cracks. If you have them, you need to adjust the door. When there are no visible gaps. check with a paper sheet. It is inserted between the body and the sealing rubber, closing the door tightly. It is necessary to pull the leaf: if it falls out easily, then the rubber does not fit tightly and adjustment is required. If you can not pull out the sheet of paper, then you have done everything correctly.
Removing and installing the handles on the refrigerator door
If the design provides for the presence of handles, they must also be moved to the other side. On the door should be plugs under the handles, they must be carefully pulled out, using a screwdriver or knife. This way the bolt holes will be free and you can attach the door handles in these places.
Unscrew the handles with a screwdriver, put plugs in these places. Attach the handles on the other side.
How to remove correctly
If you are the owner of a two-compartment refrigerator with two doors, it is better to start the dismantling process with the upper front, and then move on to the lower one. The procedure is as follows:
All plastic plugs from the appliance (including the side you plan to install it on).
- Put some masking tape on the top door. Make sure she’s holding on tight and won’t fall.
- Screw the bolts from the hinges, if necessary, remove the decorative trim and handle beforehand.
- After unscrewing all the bolts, carefully remove the hinge, peel off the tape and lifting slightly, dismantle the door.
- Secure the bottom compartment in a similar way with tape.
- Remove the seal from the pin and twist the middle and then bottom hinge fasteners with a wrench. Scotch tape, take the door off, push it aside.
- Put the removed plugs in their places.
let’s remove the upper door
The vast majority of refrigerators are two-chamber, with a freezer compartment located above/under the main compartment. about the varieties of two-chamber refrigerators we spoke in the following article.
But there was a user in the chat room below the photo who disagreed with all the participants. This is Chef Mimi Morley.
The woman told me that the drawers at the bottom of the refrigerator are unequal. These drawers can really be used for storing fruits and vegetables. But you have to find out which box is low and which is high in humidity. Vegetables such as cabbage, carrots, or strawberries, for example, should be stored at 30-40 percent humidity.
A box with low humidity should be filled with commodities that give off gas. They are not as sensitive to moisture loss. This includes stone fruits and apples, as well as kiwi fruit.
Proper distribution of vegetables in the refrigerator will help to avoid unnecessary food waste, and help keep food as juicy and fresh as possible.
Again, on the low side closed the issue and hopefully for a long time, no harm done. Why are you so perplexed by this? There is or used to be such a notion as “make it worse, so that more will be called. “So from the very beginning of my career tried not to adhere to this.
LG GA 479 BLQA fridge, How to open the back wall?
Help in writing exams, term papers and dissertations here.
LG GA-479- Refrigerator, zero zone leak Detected a leak in the zero zone, but how to fix it do not know. Who solves the problem?
LG ga-479 utma fridge, Button does not work Mode switching does not work. When you press the buttons there is a beep, but there is nothing on the display.
LG GA 479 BVLA fridge, broken sensor In m\k failed F-SENSOR. Can you tell what to replace
Electrolux Ewm1046cdu motor rod bangs against the back wall Electrolux EWM 1046 CDU When washing periodically motor rod rubs against the back wall, from.
Help in writing quizzes, term papers and dissertations here.
Again, on the low side closed the question and hopefully for a long time, no harm done. Why is this causing you to be perplexed?? There is or used to be such a notion as “do worse, so that more was called. “So from the very beginning of my career I tried not to adhere to it.
esk1, you don’t have to do this kind of repair very often. We have a super expert on autopsies.- Timofeu.”I open up and look for holes in the foam and under the metal))) )esk1, the foam is a good fit that the pro with a gun, it is not very swollen (if not tried) there is also a two-component, but not everywhere you can buy it, cuts from the opening must be smoothed with pliers, and it would be good to stretch the armor. scotch tape has the same color. You should be more careful with the condenser tubes.
15.20 cm of tubing indicator. The defect does not appear on all similar vaporizers. I hope you’re not going to argue with that? The properties of metal pipes is very different from aluminum, so we can safely conclude that the manufacturer has switched to an aluminum alloy. Perhaps (this is my assumption, not based on accurate information), the technology of alloy manufacturing difficult to maintain a certain specificity and therefore there is not a quality metal with foreign particles, which in turn cause the fault itself. Why did I draw this conclusion? I met the refrigerators younger than three years with the voiced defect (the tube in a fine strainer along the whole length of the line, from the connection to the connection) I also met quite a large number of refrigerators in which the same material, but totally normal and without any. That is why I argue that the condition of the tubes can be assessed without fully opening the foam. 2. About cutting off the circuit just in case. analogy. The principle is the same, the circuit is shut off so that later no leakage occurs on it. Well, if you will, the assumption. a micro you can not detect a leak (if I’m wrong, then sound out how you do it vacuuming or freon), therefore, in the case of an obvious leak, but, with undetected fault, will cut off the circuit, as do many such specialists. 3. I’m not smart, I just know basic things and, oddly enough, use that knowledge. I know it’s hard to believe, but I’m not the only one who performs diagnostics and repairs relying on some knowledge. 4. I don’t photograph my own work. Maybe I will take a picture of the next fridge that comes with this defect, if I’m not too lazy. I don’t carry a camera. I used to do it when I was working under warranty. Some brands required photos of nameplates of repaired appliances. Now I’ve given up the whole thing. What is there actually to photograph? With the knife you undo the plastic along the casing and press in the insulating material (fireproof), then the evaporator and carefully close the gaps. It is possible to connect in different places depending on a design of the refrigerator. It is desirable to reduce the wiring of the “snot” outside as much as possible. 5.The evaporator in your case is not out of order, but you replaced it. Yeah, your attachable evaporator will last a long time. But the cut off evaporator was serviceable and that’s what I’m talking about. You listen to yourself, does that sound normal to you?? Replace a defective part, just because I have encountered a defect on similar parts before. And how many variants of normal operation of such vaporizers have you not encountered, do not want to count? And you probably wouldn’t have encountered this. Just lucky that the leak was really on the foam and the low side. You’ve never been to a dentist? Do you think if they pull out all your teeth in a row because they can later deteriorate (they surely know that normal teeth can decay, and ceramics do not suffer from decay, replaced once a full set 32 and teeth will wear long and happy), it will be normal? How else can I explain to you that making such repairs cannot be considered the norm? Am I even talking to a human being or not?? 6. Refresh your memory, wouldn’t hurt.
I did not give advice useful to the author of the topic, but I did not give harmful. Sometimes it is more important not to give bad advice. I could have guessed myself how to detect and localize the leak, but I was advised to pressurize with freon, or better to vacuumize it. As a result, the circuit is compartmentalized, and made a refrigerator or not.
PS I point out the wrong tips to determine the leak and describe the correct order, in response. “this is an elementary piece of Math, and I do instantly, much easier and faster, so let us each stay with their opinions.”I may also want to do instantly and easily, since you started writing about your experiences, so share it. As I do myself, described in detail. I would like to hear a sensible way to instantly determine the leakage, which the author of the topic apparently could not do yourself. I point out the absolute absurdity of replacing the original functioning evaporator and in response I hear. “the fridge will work long and happy”. And who’s to say it wouldn’t work happily ever after?? It’s not like there was a defect. I understand that it is useless to talk to you, you will not accept my point of view on principle, but you are not alone here. How many people do you think will follow your advice and how many will follow mine?? Yours is 99 percent, mine is 1 percent and that’s an arithmetic error. I have a bad temper, that’s probably the only true point you made. A man is so created (especially true for our hitherto unfamiliar land, such is our mentality), that they like those who they like better and it does not matter what they foist on them. That is why the scam is so well developed in our country.
LG GA 479 BLQA refrigerator, How to open the back wall?
Help in writing tests, term papers and dissertations here.
LG GA-479- Refrigerator, Zero Zone Leak Detected a leak in the zero zone, but how to fix it I do not know. Who solves the problem?
LG ga-479 utma fridge, Buttons do not work Mode switching does not work. There is a beep when you press the buttons, but there is nothing on the display.
LG GA 479 BVLA fridge, broken sensor In m\k the F-SENSOR failed. Do you know what to replace the
Electrolux ewm1046cdu motor rod rubs against the back wall Electrolux EWM 1046 CDU When washing periodically motor rod rubs against the back wall, from.
Help in writing quizzes, term papers and dissertations here.
Again, on the low side closed the issue and hopefully for a long time, no harm done. Why do you get confused about it?? There is or used to be a concept “do worse, so that more caused. “So from the very beginning of my work journey tried not to adhere to this.
esk1, not that often we have to do such repairs. For autopsies, we have a super expert.- Timofeu.”Opening and looking for holes in the foam and under the metal))) ) )esk1, the foam is a good fit that the pro with a gun, it is not very swollen (if not tried) there is also a two-component, but not everywhere you can buy it, cuts from the opening must be smoothed with pliers, and it would be good to stretch the armature. There’s the same color with duct tape. You should be more careful with the condenser tubes.
15.The 20 cm of the tube is an indicator. The defect does not appear on all similar vaporizers. I hope you won’t argue with that? Properties of the metal tube is very different from aluminum, so you can safely conclude that the manufacturer has switched to an alloy of aluminum. Perhaps (this is my assumption, not based on accurate information), the technology of alloy manufacturing difficult to maintain a certain specificity and in view of this there is not a quality metal with foreign inclusions, which in turn cause the defect itself. Why I drew this conclusion? I met refrigerators less than three years old with the defect voiced (the tube in a fine strainer along the whole length of the line, from the joint to the joint). I also met quite a large number of refrigerators in which the same material is quite normal and without any inclusions. That is why I say that the condition of the tubes can be assessed without full opening of the foam. 2. About cutting off the circuit just in case. an analogy. The principle is the same, serviceable contour is cut off so that in the future there was no leakage on it. Well, if you like, the assumption. a micro you can not detect a leak (if I’m wrong, then sound out how you do it vacuuming or freon), therefore, in the case of an obvious leak, but, with no detected location of failure, will cut off the circuit, as do many such specialists. 3. I’m not smart, I just know elementary things and, oddly enough, use that knowledge. I know it’s hard to believe, but I’m not the only one who does diagnostics and repairs relying on some knowledge. 4. I don’t take pictures of my work. Maybe I will take a picture of the next fridge which comes with this defect, if I am not lazy. I don’t carry a camera. I used to, when working under warranty. Some brands required a photo of the nameplate of the repaired equipment. Now I gave up this hassle. What’s there to photograph?? You use a knife to pry the plastic along the casing and push the insulating material (fireproof) down first, then the evaporator and carefully close the gaps. Depending on the design of the refrigerator, you can connect in different places. It is desirable to reduce the wiring of the “snot” outside as much as possible. 5.The evaporator in your case is not defective, but you replaced it. Yes, your attached evaporator will last a long time. But the evaporator that was cut off was fine, and that’s what I’m talking about. You listen to yourself, is it really normal? Replace a defective part, just because I have encountered a defect on similar parts before. And how many variants of normal operation of such evaporators you have not encountered, do you want to count? And you probably wouldn’t have encountered it. It’s just lucky that the leak was really on the foam and the low side. You never went to a dentist? Do you think if they pull all the teeth in a row because they may later deteriorate (they surely know that normal teeth can be destroyed by decay, and ceramics do not suffer from decay, replaced once a full set 32 and the teeth will wear long and happy), it will be okay? How else can I explain to you that such repairs can’t be considered the norm? Am I even talking to the person or not? 6. Refresh your memory, it wouldn’t hurt.
I didn’t give helpful advice to the author, but I didn’t give harmful advice either. Not giving bad advice is sometimes more important. I might have figured out how to find and localize the leak myself, but I was advised to pressurize it with freon, or better yet vacuumize it. As a result, the circuit compartment, and made a refrigerator or not.
PS I point out the wrong tips to determine the leak and describe the correct order, in response. “it’s an elementary part of the math, and I do instantly, much easier and faster, so let’s stick to our opinions.”I may also want to do instantly and easily, if you start writing about their experiences, then share. As I do myself, described in detail. I would like to hear a sensible way to instantly determine the leak that the author of the topic apparently could not do himself. I point out the absolute absurdity of replacing the native functioning evaporator, in response I hear. “the fridge will work long and happy”. And who said that it would not work as it did happily ever after?? There was no defect. I understand that it is useless to talk to you, you are on principle no longer accept my point of view, but you are not alone. How many people do you think will follow your advice and how many will follow mine?? Yours is 99 percent and mine is 1 percent and that’s an arithmetic error. I have a bad temper, it’s probably the only true your point. The human being is created so (it is especially actual for our not embraced motherland, such mentality at us), that stretches to those who is more sympathetic to them and it is not important, what they actually impose. That’s why the scam is so well developed in our country.
We choose a box in the freezing chamber of the fridge
The freezer compartment in the refrigerator is a mandatory component of this device. Today you can still find refrigeration units without a freezer. But such variants are not very popular and are purchased mainly for countryside use. But freezers are successfully used by almost all housewives. Therefore the subject of a choice of drawers in the freezer compartment is very actual.
Modern refrigerators are made of metal casing and plastic inner parts. Though manufacturers do their best to use high-strength material, plastic elements often break and become worthless. Of course, you can replace the refrigerator by buying a new model. But for most families, such a purchase, is an expensive pleasure. It is much cheaper to buy drawers for refrigerator Atlant in the freezing chamber.
Can one do without them?? If the manufacturer initially equipped the freezing chamber of Atlant, Indesit, Biryusa, Samsung with a capacious drawer, it is not logical to throw out the broken part and not to buy a new one instead. First, it is not convenient to store frozen products without a drawer. Secondly, without special equipment, the freezer can simply not function properly.
Each freezer drawer is a convenient, roomy container with a tightly closing panel. After stacking vegetables, fruits, meat and fish, the container closes, so food is preserved much longer. If you observe the product neighborhood, it is the door panel that allows you to place strong smelling foods to freeze without fear of the aroma transferring to other foods.
Attention! The text in this document was recognized automatically. To view the original page, you can use the “Original” mode.
Before assembling and disassembling, make sure that the power cord is unplugged from the outlet. Never use force when disassembling, it may cause damage
40 Watt (maximum), which is available from the service center.
Lift slightly the left side of the shelf (. raise the right side (@) and remove the shelf.
Lift the drawer, holding it by both sides, and then pull it out in the direction (
Insert the tool in the indicated place and press. Use a flat-tipped tool (-) like a screwdriver.
Bulb for a refrigerator with 40W power, designed for the maximum
Separate the container ( by filing it upwards. ■ Remove the top shelf of the bar, and then
Before removing the built-in bar, it is necessary to remove the compartment for
Vegetables, the snack drawer and the lid of the integrated bar.
LG refrigerators have taken the leading position in this segment of technics. Company is considered the world center of innovation. All makes of refrigerators from two-door to complex French and American series are made qualitatively, the design is stylish. LG refrigerators hardly ever malfunction during the warranty period. Often the repair is connected with the voltage drop in the network. the electronics can not stand. Buying a modern model of refrigerator, you should take care to install it through the voltage regulator.
Specific malfunctions of LG two-chamber refrigerators
LG refrigerators are built to last. However, it is common for appliances to malfunction over time. From the first day of use, it is necessary to take care of the electronic control unit and the compressor, especially the inverter. Electronic program setting needs attention. Step-by-step instructions can be found in the appropriate section of the documentation for the appliance.
Some models are noted in reviews as too noisy. Part of the cause lies in the quality of assembly at sites around the world. However, a correct installation according to the level, tightening of the fasteners with your own hands, standard vent clearances will partially eliminate the noise of LG refrigerator. Repair is required when extraneous knocking, whistling or strong heating of the compressor will add to the noise.
The breakage is considered if one of the chambers of the refrigerator has ceased to keep the set mode. Ice has appeared in the freezer or minus temperature is observed in the cold cabinet. There may be several reasons for this:
- malfunctions in the automatic control system;
- failure of temperature sensors;
- Faulty relays;
- Cooling circuit problem due to freon leakage or compressor failure;
- Magnetic valve defect in the single-compressor double-chamber apparatus.
The LG refrigerator No Frost system malfunction will signal the temperature mode violation, icing inside the cooling chamber. The air-cooled food system is complex and balanced. The system includes an evaporator that blows cold air into the freezer with a fan. Then the gas flows through the air valve to heat the plus chamber. Problems can be related:
The appearance of ice in the freezing chamber, the “coat” in the refrigerator indicates the possible malfunction in the condensate drain circuit.
How to wash the refrigerator from the back
You will find a phrase in the factory manual of any refrigerator that you should wash the back of the refrigerator 1-2 times a year. It’s not just a matter of striving for cleanliness.
Regular cleaning of the refrigerator condenser, freeing the fan from dust buildup are important elements in the longevity of the entire installation.
The condenser is a complex system of thin tubes bent into a U-shape and soldered into a single black coil. The node is designed to dissipate excess heat into the surrounding air. The main characteristic that is required of it is the ability to radiate as much heat as possible. Any contamination on the surfaces of the heat exchanger impairs the quality of operation, up to complete cessation, if the dust is compacted into a felt “coat” and does not let air in.
To qualitatively clean the refrigerator from dust at the back, you need to turn it around, opening access to the back wall. You can not fear for the safety of products. all work takes no more than 15-20 minutes, and the doors will remain closed. This applies when only cleaning the refrigerator condenser without defrosting is performed.
Depending on the model and year of manufacture, the evaporator will be either directly on the wall or down near the compressor. Then it will be necessary to remove the protective cover by unscrewing some screws. Lower position of the compressor assumes that there is a fan near it that forcibly creates air flow by sucking it through the slots in the cover.
- Disconnect the refrigerator from the power supply.
- Make the radiator grill of the cooler accessible, if necessary remove the enclosure panels.
- Try to clean the refrigerator’s condenser using a vacuum cleaner with a narrow, slotted nozzle that penetrates into tight places.
- Use a brush with long, stiff bristles to remove any debris or grease that cannot be removed. Use one hand when holding the brush and the other hand when bringing the vacuum cleaner hose to the area to be cleaned.
- If in the especially difficult narrow places you could not get all the dirt with a brush, use a wooden or plastic (not metal) ruler to penetrate into the inaccessible places.
- In old appliances, sticky deposits may form on the surface of the heat exchanger tubes because the oil in the compressor leaks out through the microcracks under pressure and contaminates the parts. In order to wash the fridge condenser from the old oil, one should use household dishwashing agents. Do not use chemicals that are more corrosive and damaging to the radiator tubes. Before plugging in the appliance, make sure that there are no traces of moisture or detergent on the surfaces. If necessary, dry it with a hair dryer or let it dry on its own.
The main mistake that should not be made is to damage delicate radiator tubes mechanically or with a very corrosive chemical.
Back grill cleaning
In older models, the condenser looks like a black coil on the back of the refrigerator. Acts on the principle of free circulation: no forced blower, the warm air rises naturally, making way for the cool air.
To clean the back grill of an older model, use the same vacuum cleaner, but there are no electrical wires or contacts nearby. Therefore, after collecting dust, wash the tubes with a moderate amount of water and detergent. Do it gently, without damaging them. Some housewives have adapted a kitchen bottle brush to clean the refrigerator grill. That’s convenient, too.
Cleaning the blower from dust
According to professional repairmen, a clogged blower in the engine compartment is one of the most common malfunctions they encounter. The reason is obvious: practically all models have compressor compartment at the bottom near the floor. Powerful air intake with blades draws all the dust and debris inside. Especially the fan clogs quickly when cats or dogs live in the house. The hair of a shedding pet will clog all the holes in the condenser and jam the rotation of the blades.
With non-functioning blower, the freon in the pipes of the system will not give out the excess heat, and the efficiency of the cycle will considerably decrease. Compressor will stop shutting down. It will not work like that for a long time, it will overheat, wear out and fail. The neglect of the owners of the elementary care of their kitchen appliances will end up with an expensive repair (the price of replacing the compressor with work. about a third of the cost of a new refrigerator).
Often it is enough to dust the fan of LG, Electrolux, Liebherr or other brands to avoid the burnout of the compressor motor after a month or two. For cleaning remove cover of compressor compartment allowing access to fan blades and pick up all unnecessary things with a vacuum cleaner. Use a stiff brush if necessary.
Do not use liquid detergents, since the compartment is full of electrical wires, contacts, and parts that can be damaged by moisture or chemicals.
Rear Wall Washing
A quality major cleaning with the removal of the protective panels and servicing of the refrigeration units looks like too much of a hassle. Not always enough time. But even if you just clean the back wall of the fridge from dust, having paid attention to the vent holes, you will be able to avoid future problems with the motor compartment fan clogged with dust.
When the condenser grid is hidden under a decorative plate with slits for airflow, this panel also needs to be kept clean. To wash the rear wall of the fridge, you can use any appliance detergent that is not very foaming. The foam and moisture inside the engine compartment can cause the automatic relay to short circuit or corrosion of the electrical terminals.
Cleaning the LG No Frost refrigerator without defrosting
Although your No Frost fridge is designed with automatic defrosting, at least once a year this procedure has to be done manually. The thorough cleaning includes the thorough cleaning of all the sections including the freezer compartment.
If a fridge has not defrosted for a long time and needs to be cleaned, you can do without defrosting.
- Unplug the fridge;
- leave the freezer compartment closed;
- quickly remove, wash and dry all the shelves;
- remove dirt from the internal walls of the appliance;
- Washing the fridge from outside;
- thoroughly collect all moisture. it is better to use paper towels for this purpose;
- Refrigerators are repositioned and the foodstuffs are put on the shelves.
[LG Refrigerators] Adjusting & Removing Shelves From Your LG Refrigerator
How the system works?
The difference of No Frost units from appliances with drip defrosting is the absence of the freezing evaporator in their freezing chamber.
The evaporator is a coil-shaped aluminum radiator located behind the rear panel of the freezer.
WARNING! In the space between the outer and inner walls of the chamber there are air ducts through which the cold air is evenly distributed throughout the refrigerator.
In the lower part of the evaporator there is a drainage hole: through it, the moisture generated by the thawing of this functional unit goes into a special container near the compressor and evaporates.
The fan (located next to the evaporator) is a plastic impeller or wheel-shaped device that directs cooled air through a system of air ducts to different parts of the chambers.
The heater is a coil (tungsten or nichrome), placed in an aluminum casing or a glass bulb. Purpose of the node. removal of frost from evaporator.
- When you turn on the refrigerator, the compressor and fan start working and the air gradually cools down;
- When the thermostat reaches a temperature of 10 ⁰C below zero, the timer will open the fan-compressor circuit and close the heater-evaporator circuit, which will cause the evaporator to heat up and the frost to melt. Defrosting takes place until the thermostat has reached a temperature of 10 ⁰C. The timer then closes the fan and compressor circuit again;
- 8 hours after the first defrost, the timer repeats the defrost cycle of the evaporator.
The cooling of the chambers is done as follows:
- warm air from the interior of the refrigerator absorbs the refrigerant flowing through the evaporator;
- The substance boils under the influence of increased temperature and turns into a gaseous state;
- The compressor pumps freon into the condenser, where its temperature decreases again and it becomes a liquid, which enters the capillary tubes between the inner and outer walls of the chamber;
- The cooled freon “takes away” the heat from the fridge compartments again, turns into steam and goes to the evaporator. The cycle repeats.
Does it need to be defrosted?
The No Frost system defrosts the appliance automatically. However many owners of household appliances in the course of operation face the fact that in the freezer and sometimes even inside the refrigerating chamber the frost is formed.
Why does this happen?? The reason for the formation of ice is nonobservance of the rules of using the refrigerator: overloading the shelves with lots of pots, bowls with food, placing hot food in it.
WARNING! Appearance of snow “coat” can be connected with device failure: failure of thermo relay, damage of sealing rubber on the door, plugging of capillary tubes.
over, the choice of the No Frost system has a direct influence on the proper operation mode of the fridge: if the chambers are cooled at a too low temperature or the super-freezing function is constantly on, this will cause the chambers to freeze.
Taking into account the factors listed above, it should be said that even such modern devices also need manual defrosting. Frequency of defrosting directly depends on the rate of frost formation, in most cases the device should be defrosted and washed at least once a year.
If the frost is not eliminated, the heat exchange between the chamber walls and the refrigerant will be disturbed. As a result, the compressor will have to work with more power, which can lead to rapid wear and tear of the functional element and breakdown of the refrigerator.
IMPORTANT! One of the main factors indicating the need to urgently defrost the appliance is the thickness of formed frost: if the layer of frost on the walls is approaching 1 cm, proceed to defrost.
Where to Start Cleaning?
Begin washing your refrigerator only after it has defrosted:
- Put the thermostat in the “0” position, unplug the device from the mains;
- Lay old towels on the floor around the refrigerator, open the door of the unit and lock it that way;
- Remove the food from the refrigerator and place it in a cool place;
- Remove all removable elements (shelves, drawers), wash them in a soapy solution, rinse and leave to dry;
- Remove the moisture formed during the defrosting process and proceed to wash the device.
IMPORTANT! If both compartments of the fridge-freezer are equipped with the No Frost system. you can defrost and wash them simultaneously or alternately.
What products can be used for cleaning?
To clean the refrigerator you can use both chemical products and remedies made by your own hands.
Repair the refrigerator drawer
I’ve come up with the following solution: I bought 2.5 mm of tensioners. for 40. drill 2,5 mm. for eight. I needed an electric screwdriver, wire cutters and pliers. And time, of course. It took me about 40 minutes to put two crates together. You can see the result in the photo. It turned out very strong: half a year flight normal.
And yes, the idea of fixing the plastic with zip ties is not new, but I think few people have guessed to use this idea here.
The freezer compartment of the No Frost fridge is forming ice under the drawers
I tried to reanimate the front wall after the first break, I put patches on the cracks, rivets But the transparent plastic is just treacherously brittle, you can’t touch it. Apparently, Indesit manufacturers have no idea what people keep in their refrigerators. I should tell them there’s mostly meat in there, not ice cream from the market.
Anyway, I got rid of the wreckage. I had to pick up a piece of plywood as a billet for the future new front wall of the drawer. What to do?? It would be nice, of course, a piece of thick plexiglass, but not in my cherished corner of such! There’s plywood. Though opaque, but reliable.
A tape measure, a square and a pencil are available, not a problem, so I accurately marked everything and sawed out the desired shape with a jigsaw.
If everything is left as it is, it will be difficult for my hands, they will all be in splinters. But the belt sander with success smoothed everything out, and then hand sanded all the edges and corners. Now it is smooth, pleasant to the touch.
And here corners necessary galvanized were found, and screws short, just in the size, and washers necessary. It’s neat and tidy.
I had to install additional strips on both sides, with screws in them. Not very smoothly arranged, of course. Okay, maybe the wife will not notice.
That’s it. Nice and noble. I would have to send it to the manufacturer, maybe they will understand how to make a box for 10 kilos of minced meat. But I won’t do it. They don’t understand. They only freeze cocktail ice in their fridges at home.