Home Small appliances How to remove stains from the induction hob
Small appliances

How to remove stains from the induction hob

All about cleaning glass ceramic stoves

Detergents

On sale there are many compositions that can remove grease and dirt from the electric stove. To advise a specific. it is difficult, and it is not necessary, because the active substances in most are the same. Manufacturers of household appliances also produce products, than you can wash a stove made of glass ceramic. So if your appliance is a well-known brand, it makes sense to look for a product of the same brand.

remove, stains, induction

The right cleaning process

  • Wait until the glass ceramic hob has cooled down before cleaning it. Apply the product to the hot appliance can not according to the rules of operation, in addition, so much stronger will be felt the chemical smell.
  • Use a special glass ceramic hob scraper for soot and stubborn stains. This is an important condition. Regular metal scrapers are not suitable for washing and can leave marks and scratches.
  • Apply detergent and use a sponge to distribute it. Rub the plate thoroughly.
  • Use a damp cloth to remove stains from the washcloth.
  • Wipe the appliance dry with a towel. This prevents streaks from damp cloths.

Melamine sponge

Melamine sponge. the way to clean your vitrified clay hob. The properties of a sponge help get rid of stubborn stains, but it must be used correctly. Don’t use the whole sponge dry, but cut it off and moisten it first. Wearing gloves is also recommended. Once the dirt is removed, you can wipe the surface with a damp sponge or additionally apply detergent, then rinse it off.

Glass cleaner

It’s not likely to get rid of grease, but it will give your hob a shiny and clean look. Use in the same way as with cleaning mirrors and glass. sprinkle on the surface and wipe with a dry cloth, you can take a microfiber. it will not leave lint and make the coating glossy.

Tablets for washing dishes in dishwashers

The properties of these tablets help dissolve grease. Take a cup of warm water and dissolve the tablet in it. Then apply the resulting solution to the surface and wash it in the usual way. After cleaning, use clean water so as not to leave streaks, and finally wipe the appliance dry with a clean towel.

Detergents

The surface of the stove is almost mirror-like, which is both a disadvantage and an advantage. The easiest way to get rid of stains is to use window cleaner. It will give a radiant shine to the surface.

Vinegar 9% is good for white stains, plaque and grease. Most household cleaners contain ammonia, so ammonia and water will get rid of the stains.

General Cleaning

Not everyone gets to take care of the stove on a daily basis, as a result, the surface requires cleaning by more serious methods. To get rid of burnt food particles, you must first soak them. To do this, moisten soft cloths in a solution of detergent and put them on all problematic places. After a few minutes the dirt will soften, and you can easily remove it with a squeegee (keep the squeegee at a 45 degree angle to the surface). Finally do the second and third steps from the previous section.

Scraper for induction stoves is equipped with a replaceable nozzle

If after such manipulations white stains are left on the glass panel, remove them with table vinegar. Soak a soft cloth in it, wring it out and go over the whitened areas.

See also  Gipfel dishes are suitable for induction plates

If the caked onion does not want to be removed, sometimes you just want to use an aggressive cleaner for plumbing or tile. Do not do this under any circumstances! Exposure to corrosive chemicals can cause irreversible damage to the stove surface. To remove “stubborn” dirt, reapply a cloth with detergent solution, but hold it a little longer and then repeat the treatment with the scraper.

The use of abrasive agents can lead to this result

Popular Stains

Let’s look at some examples from life, which cause a lot of housewives, if not panic, then strong dissatisfaction and irritation so exactly.

getting rid of carbon deposits

Note that if you clean your induction stove daily immediately after use, the likelihood of unpleasant multi-layered fouling is reduced to zero. However, our desires do not always coincide with our capabilities, so here is a step-by-step instruction for eliminating this unfortunate artifact:

  • spread the cleaner on a cloth and place it on the problem area;
  • Wait 10 minutes, during which time the food debris will be completely soaked;
  • gently scrape away the softened bits with a scraper;
  • Remove them with a rag and wipe them dry.

A common sunflower oil will also help perfectly to clean the induction stove at home. Simply apply it to the soiled surface, wait 5-10 minutes, and then clean with a cloth soaked in warm water.

Or baking soda. Mix it with water to make a paste, and then apply the resulting mass to the desired area. All the rest. according to the algorithm, given above.

Wash away grease

If conventional means for glass ceramics did not cope with grease stains, and the surface does not please the eye, it makes sense to try ammonia alcohol.

  • mix it with water (recommended ratio is 1:5);
  • Pour the resulting liquid into a container with a sprayer;
  • Spray the surface where grease marks are present;
  • Allow about 10 minutes for the alcohol to produce the desired effect;
  • Wipe off with a cloth or sponge.

Eliminate white stains and streaks

Another problem with induction stoves. Appears most often in cases of salty or sweet water boiling on the surface.

Even the most effective glass ceramic cleaner can’t cope with such stains.

But that doesn’t mean you can’t use them: you must first clean the dirty area with this type of gel. It will remove the rough spots and carbon deposits, but the stain, even if less visible, will still be there.

No problem: then. here’s the most important. use a cleaner for steel surfaces. And do not forget to remove its traces with a soft cloth immediately after the whitish streaks and stains have safely disappeared.

Unusual remedies for removing soot

Sometimes there is not enough time to wash or wipe the stove immediately after cooking. It is therefore not uncommon for multiple layers of soot to form on an induction hob.

If standard ways of removing grease and dirt do not help, we recommend resorting to the following tricks:

  • Moisten the hob cleaning cloth with warm water and place it on the soiled areas for 10 minutes. After the food residue has soaked, remove it with a rubber scraper.
  • In particularly severe cases, apply a special cleanser to the cloth and place it over the problem area for 10 minutes.
  • You can use sunflower oil to clean the soot. Apply it to the hob and wait a little, then wash off with a sponge soaked in warm water.
  • A plain baking soda is a great way to get rid of any stains. Mix it with water until it is a paste and spread it on the dirty area, then remove it with a sponge.

Often hostesses prepare their own cleaner from ingredients that are available in almost every home. For example, from vinegar. It has an excellent disinfectant property and removes all germs and bacteria.

So, to prepare a cleanser from vinegar:

  • Mix the vinegar and water in a 1:1 ratio;
  • Pour the resulting solution into a spray gun;
  • Apply to the soiled area and let it soak for 5 minutes;
  • Wipe the stove with a dry cloth or paper towel.
See also  Boiler gas double -circuit wall -mounted beretta problems

Ammonia can also be used. It cleans dried-on stains and encrustations and polishes the glass ceramic surface well. To prepare the solution, mix water and ammonia in the ratio of 1:5, then use an atomizer to apply to the surface and wait 10 minutes. Afterwards, wipe the stove with a soft cloth.

Popular stains

Scale, grease and soot may form on the cooking surface, as well as fingerprints and stains from dried water. These stains are fairly easy to remove. Simply wipe them with a special sponge.

Fouling

Stubborn soot on the cooktop is difficult to clean. But under no circumstances should it be removed using aggressive cleaning agents. The only thing you can do is to keep the cloth with the soapy solution on the stove longer and wait for the dirt to soften, then treat the stove again with a silicone scraper.

Grease is well helped by special products. If they don’t do the trick, try using ammonia alcohol. It is diluted with water in a ratio of 5:1, where 5 parts should be water and 1 part ammonia. Using a sprayer, the solution is applied to the surface, which after 15-20 minutes should be washed in the usual way.

White spots and stains

White streaks may remain on the hob surface after cleaning. A simple vinegar will help in this case. It’s enough to moisten a cloth and wipe the stove.

Maintenance rules

Induction hobs have quickly gained popularity among users not so much because of the properties of heat transfer without heating a larger surface area, but because of the stylish and sleek design.

Such hobs provide a smooth (and even mirror like) surface. The material from which the boards are made withstands impact and high temperatures, but it is very easy to scratch it (even accidentally). If a knife or fork falls on the stove, it will leave a mark on the surface. You need to keep this in mind when caring for the unit.

RECOMMENDED! Check out our detailed guide on how to clean the inside of your fridge after defrosting.

In order for the glass ceramic tile to last for many years, you need to follow some recommendations:

  • Wash the stove once it has cooled completely. Otherwise 100% of 100 cases soapy soap stains, burnt food, drops and other dirt will remain on the cooking area. You can also easily burn yourself on this surface.
  • It’s best to wipe the stove down before you start cooking. This might sound strange to some people, since the surface is already clean. But the tiles already have a little dirt, they will begin to stick and stick during the work, from small such stains quickly turn into a noticeable and difficult to remove.
  • Make sure the bottoms of the dishes you place on the stove are clean and smooth. Rough, oily, uneven bottoms can damage the surface.
  • Make sure that no water droplets or streaks are left on the stove after cleaning. Make sure you wipe the surface with a paper towel or a dry soft cloth after cleaning.
  • Do not use the same sponges and cloths you use for cleaning your induction hob as you do for example, washing dishes, or wiping down furniture and windows. Cleaning with these rags will leave stains and streaks.

Daily Care

In order to ensure that your induction hob lasts longer and maintain a more presentable appearance, clean it daily.

IMPORTANT! Daily maintenance involves the usual wet mopping with a suitable mild detergent and a clean sponge without any abrasives. After this cleaning, wipe the surface dry with a cloth or paper towel.

  • Wait until the hob has cooled down completely.
  • Soak a soft, clean cloth in a soapy solution (!) sponge, wipe the tile surface.
  • Leave the cleaner on for a few minutes to allow it time to dissolve any burnt-on food residue.
  • Wipe the surface with a clean, damp cloth to remove soap, grease and limescale residue.
  • Wipe dry with a paper towel or cloth.
See also  How to clean a ceramic hob

A thorough cleaning

If you can’t get rid of stubborn stains on your induction hob, a regular wet cleaning is not the answer. Here the problem has to be dealt with radically. For a thorough cleaning, you’ll need rubber scrapers and specialized cleaners for glass ceramic surfaces (stoves):

  • Apply your normal detergent to the entire surface of the tile. On especially problematic areas, place a cloth soaked in detergent. Let it sit for a few minutes.
  • Wipe with a clean, damp cloth, and use a rubber scraper to remove all burnt food. At the same time, hold the spatula at an angle of 30-45 degrees, so as not to scratch the panel.
  • If the detergent did not cope with dirt, it is time to move on to the use of specialized products that are designed to clean induction hobs. Usually the instructions call for applying a small amount of the product to stains and soot for a few minutes, after which you must remove the remains of the solution and grease with a damp sponge or cloth.

WARNING! Specialized hob cleaners must only be used with gloves, as they contain aggressive chemicals that can attack the skin.

Specifics of care for the induction hob

Induction hobs with glass ceramic tops are available in gray, black or gold. They’ll brighten up any kitchen and make cooking easier.

Please note! Keep plastic dishes and bags away from the hot zone. The oven is difficult to clean from drips of melted plastic or polyethylene.

An induction cooktop differs from an electric cooktop in the way it works. Heating is ensured by a powerful magnetic field generated by magnetic coils. The magnetic field affects the ferromagnetic particles in the cookware. The ceramic glass surface of the stove does not get warm during operation. It can only get hot from the bottom of the pot.

How to clean glass stovetop/cooktop using natural ingredients easy and effecient

Important! Remove any stains before cooking. Otherwise the dirt would stick and it would be much harder to remove.

Food cooks quickly on the induction hob. A small amount of water boils in 1 minute. The minute the hostess puts the cookware away, the stove shuts down. Can be washed in a couple of minutes.

There are several features for taking care of the stove. Let’s find out how and how to clean the induction stove from soot at home.

How to care for your stove so that it lasts for years to come

Applying these simple recommendations, you can not worry about the condition of your tile. it will stay clean for a long time

  • Make sure your stove is perfectly clean before you cook.
  • In order to avoid any heavy soiling, we recommend cleaning it after each use. This takes minimal time and keeps the appliance in good condition.

Do not wash the hob until it has cooled down. Otherwise you might end up with white streaks or even cracks!

  • Use separate sponges, cloths and washcloths for cleaning your induction hob. This will prevent the accumulation of small particles or grease residues that are detrimental to the coating.
  • Use detergent on a damp sponge or cloth, not on the stove. This will help to keep the protective coating intact and avoid streaks.
  • Do not use hard or metallic sponges or abrasive substances so as not to scratch the surface.
  • Use flat-bottomed pans so that the hob is not scratched.

Now, armed with our tips, feel free to go to the store and choose the best induction stove!

Author

Kerariel

| Denial of responsibility | Contacts |RSS