Home Article How to remove rust from an electric teapot
Article

How to remove rust from an electric teapot

How to wash rust from an electric teapot

In addition to the fact that the appearance of the dishes will be very spoiled from the raid of rust, it will also ruin the taste of the cooked drink directly.

A large layer of plaque on the heating elements of the kettle will be a catalyst for its quick failure, so rust must be removed as quickly as possible and care for the kettle so that it does not appear at all. However, it is necessary to clean the kettle of scale and rust immediately, at the first appearance of it.

A large amount of metal in the body, which can get through the use of water from a teapot with rust, will also harm. This is most often a diet, skin and teeth problems.

How to remove from electric kettle

Electric teapots suffer from rust on the spirals. This interferes with the heating element to work at full power, and over time, the device fails. It is necessary to clean the container from rusty plaque in time.

The Easiest Way to Clean Your Kettle

Folk methods

The precipitate on the walls of an electric teapot made of metal is easily eliminated with acids. Usually use the substances that every housewife has at home.

Vinegar

A concentrated solution of acetic acid is poured into the teapot flask, the device is included. It is necessary to boil the liquid so that the rust layer leaves. It is necessary to rinse the inside of the dishes in several waters. Then boil clean water to remove the residues of acid and smell. During cleaning, open the window to disappear the smell of vinegar. The substance should be used carefully so that the acid does not get on the skin, does not burn the respiratory tract.

Lemon acid

Minor rusty spots extend using citric acid:

  • Half a liter of water is heated in the kettle.
  • Pour 2 tablespoons of citric acid.
  • Boil for 5-10 minutes.
  • After disconnecting the device, pour water.
  • Wipe the place where rust was with a damp sponge.

You can get rid of rust with a slice of lemon, throwing it into hot water and boiling it.

Brine

Effectively dissolve rusty acid precipitate contained in the brine of cucumber or cabbage. From the jar fill the teapot flask with a brine, turn on the device. It is necessary to boil for a few minutes so that the rust layer becomes soft and easily separated from the spiral, walls. Then wash the dishes, wipe it dry.

Carbonated drinks

A feature of orthophosphoric acid contained in gas saturated with gas is the ability to remove salts and oxides. You can pour Coca-Cola or Fantu into an electric kettle. Before this, the drink should be settled so that part of the gases leave. Boil water for 10-15 minutes, then leave for half an hour and drain the liquid.

Vinegar and soda

This method will help remove a rusty coating on a spiral of a metal and plastic teapot. Water is poured into the device to half a liter, you need to add 200 ml of vinegar and a tablespoon of baking soda there. After waiting for the reaction of soda darling to stop, turn on the device and boil for several minutes. At the end, you need to rinse the device’s flask well to remove the particles of iron oxide.

Potato peelings

The peel removed from potatoes during cleaning is washed with water. It is folded into the electric kettle, poured with water. Boiling is carried out within a few minutes. Then slightly cool, pour the liquid with potato cleaning. Rinse the flask with clean water.

Household chemicals

The effectiveness of chemicals from scale and rust is higher than acidic compounds. It is necessary to choose such products of household chemicals so that they are safe, completely destroy the deposits inside the electrical appliances.

remove, rust, electric, teapot

Pulsar Kalk Free

The liquid contains phosphoric acid and a little surface-active substances of non-ionogenic nature. A working fluid solution is poured into a kettle, leaving for 5-7 minutes. Then the container is washed with clean water.

See also  How to assemble a floor fan Zanussi ZFF

The product acts delicately. It is applied to the areas damaged by rust and kept for some time. Then rinse the remaining rags.

How to remove from electric kettle

Electric teapots suffer from rust on the spirals. This interferes with the heating element to work at full power, and over time, the device fails. It is necessary to clean the container from rusty plaque in time.

Folk methods

The precipitate on the walls of an electric teapot made of metal is easily eliminated with acids. Usually use the substances that every housewife has at home.

Vinegar

A concentrated solution of acetic acid is poured into the teapot flask, the device is included. It is necessary to boil the liquid so that the rust layer leaves. It is necessary to rinse the inside of the dishes in several waters. Then boil clean water to remove the residues of acid and smell. During cleaning, open the window to disappear the smell of vinegar. The substance should be used carefully so that the acid does not get on the skin, does not burn the respiratory tract.

Lemon acid

Minor rusty spots extend using citric acid:

  • Half a liter of water is heated in the kettle.
  • Pour 2 tablespoons of citric acid.
  • Boil for 5-10 minutes.
  • After disconnecting the device, pour water.
  • Wipe the place where rust was with a damp sponge.

10 best means than to wash the glossy kitchen at home

You can get rid of rust with a slice of lemon, throwing it into hot water and boiling it.

Brine

Effectively dissolve rusty acid precipitate contained in the brine of cucumber or cabbage. From the jar fill the teapot flask with a brine, turn on the device. It is necessary to boil for several minutes so that the rust layer becomes soft and easily separated from the spiral, walls. Then wash the dishes, wipe it dry.

Carbonated drinks

A feature of orthophosphoric acid contained in gas saturated with gas is the ability to remove salts and oxides. You can pour Coca-Cola or Fantu into an electric kettle. Before this, the drink should be settled so that part of the gases leave. Boil water for 10-15 minutes, then leave for half an hour and drain the liquid.

Vinegar and soda

This method will help remove a rusty coating on a spiral of a metal and plastic teapot. Water is poured into the device to half a liter, you need to add 200 ml of vinegar and a tablespoon of baking soda there. After waiting for the reaction of soda darling to stop, turn on the device and boil for several minutes. At the end, you need to rinse the device’s flask well to remove the particles of iron oxide.

Potato peelings

The peel removed from potatoes during cleaning is washed with water. It is folded into the electric kettle, poured with water. Boiling is carried out within a few minutes. Then slightly cool, pour the liquid with potato cleaning. Rinse the flask with clean water.

Household chemicals

The effectiveness of chemicals from scale and rust is higher than acidic compounds. It is necessary to choose such products of household chemicals so that they are safe, completely destroy the deposits inside the electrical appliances.

Pulsar Kalk Free

The liquid contains phosphoric acid and a little surface-active substances of non-ionogenic nature. A working fluid solution is poured into a kettle, leaving for 5-7 minutes. Then the container is washed with clean water.

The product acts delicately. It is applied to the areas damaged by rust and kept for some time. Then rinse the remaining rags.

Why does the kettle rust inside

Rust in an electric kettle appears due to low water quality. If you pour water fluid into the unit for boiling, then hard impurities, salts and iron compounds will settle on the walls quite quickly on the walls.

The rust is the fastest on the rough surfaces. The less often they clean the electric kettle, the more lime and reddish plaque settles on its walls. The best prevention of rust is careful care for the kitchen unit.

See also  How to clean stains on a cooking surface

Attention! When using filtered water, the problem appears less often. However, over time, rusty traces can still form in an electric kettle.

Is rust harmful in a kettle

If rust appeared inside the teapot, you need to clean as soon as possible. First of all, the raid harms the electrical device itself:

  • settles on a heating spiral and slows down the process of boiling water;
  • leads to an increase in costs for gas and electricity;
  • causes premature breakdown of technology;
  • worsens the taste of water and gives it an unpleasant odor.

If an electric kettle rusted from the inside, then the liquid heated in it will contain increased volumes of oxidized iron. The use of such water harms the human body. The accumulation of excess iron in tissues and internal organs leads:

  • to a decrease in immunity;
  • to a deterioration in metabolism;
  • to the appearance of allergic reactions;
  • to chronic diseases of the liver and kidneys;
  • to the ailments of the heart;
  • to articular inflammation.

Increased iron in boiled water used to prepare dishes can negatively affect the taste and benefits of food.

Preventive measures

So that there is no problem with how to clean the kettle of certain contaminants, you must handle it correctly. There are a number of measures to prevent the appearance of dirt, fat and raid. These include:

  • in clean dishes and cleansing it as necessary;
  • use only pure filtered water;
  • pour the remaining liquid after boiling;
  • cleaning dishes for storage, if it is not used at the moment, especially if something else is prepared on the stove at this time;
  • do not install an empty vessel on open fire, and even more so do not forget it for a long time.

We clean the electric kettle

Electric kettle should only be washed after disconnecting from the network. In many models, you can pull out a cord that joins the base.

After washing, the kettle is necessarily dried and only then connected to the cable.

To eliminate stains from the plastic surface, aggressive methods using soda or citric acid are not suitable. But if you have any carbonated drink in the refrigerator, you can not run to the store for a cleaner. It is better if it is a colorless fluid, since Coca-Cola or Pepsi can paint a bright surface of the dishes.

Shipping must be treated with fat spots and leave for 30-60 minutes. Then rinse everything with water, wiping the pollution with a sponge. Using such a drink, you can also remove the scale if pouring the soda into the kettle and boil it. The cleansing effect is achieved by the presence of acids in such a water.

Also, an electric kettle can be wiped with lemon. It will lighten yellow spots and help remove fat.

You can use funds in the form of powder, tablets or granules (for example, antinakipine from the Sanita brand). They cope with stronger deposits on the surfaces.

Cleaning electric kettle

It is recommended to clean an electric kettle from rust inside with dietary acids. citric or acetic. They are safe for health, you can not worry that the remains will go into the water for drinks. In addition, dietary acids will gently remove a rusty coating without damage to the material. A special tool will help against strong pollution.

remove, rust, electric, teapot

Lemon acid

  • Pour water into the electric kettle to the maximum mark.
  • Pour the bag (10-15 g) of citric acid.
  • Turn on and boil.
  • Wait a while and boil again.
  • Leave the device for 10-15 minutes.
  • Pour lemon water and wipe the sponge inside.
  • Rinse under the tap, type clean water.
  • Boil and drain boiling water.

How to remove hard water Stains from Kettle|How To Clean A Kettle | How To Clean A Kettle Inside

It is important to be careful: after boiling, the metal parts will be hot. It is recommended to wait until the inner walls and the heating make. Only then can be wiped with a sponge. For protection should be put on rubber gloves. The sponge will quickly become orange, so it must be often washed or changed.

Instead of powder, you can wash the kettle with a fresh lemon. Acid in it is not so concentrated, so the juice is suitable for light rust. The principle of cleaning is the same: chopped lemon (1-4 slices) is put into the water and boiled several times. Previously, you can grate the details of the kettle with lemon, withstand for two minutes, and only then pour water and boil with the same slices.

See also  How to Remove the Heating Element in a Samsung Washing Machine

For ease of cleaning narrow places, it is recommended to use an old dentist.

Vinegar and soda

Plastic can be cleaned with carbon dioxide. It is formed as a result of the reaction between vinegar solution and food soda. How to do:

  • Pour water into an electric kettle into three quarters.
  • Share vinegar solution to the maximum mark.
  • Pour a tablespoon of soda.
  • Wait for the end of the reaction and boil the liquid.
  • Leave to cooling.
  • Drain the water and rinse under the tap.

If the rust has a brown shade, you can try to clean the surface with vinegar with water. The method is suitable for metal, glass and plastic teapots. How to use:

  • Pour 2 cups of water inside.
  • Boil and pour half a glass of 9% acetic solution.
  • Leave for an hour.
  • Drain and boil clean water several times.

It should be periodically checked how the cleaning process is going on. If the rust and the scale are swelled, but did not move, they can help them with a sponge or an old dentition.

The smell of vinegar disappears quickly. It is enough to rinse the surface several times with cold water and leave a kettle with an open lid.

Bagi kumkumit

If it is not possible to wash the rust with folk remedies, it is recommended to use the purifying fluid “kumkumite” BAGI. In addition to rust, he will save from the old lime plaque. Suitable for metal and plastic electric teapots. The composition includes citric acid. Produced in bottles of 350 ml. It costs 150–250.

  • Distribute evenly on the surface of 50-100 ml of liquid.
  • Hold 3-5 minutes.
  • Pour 500 ml of water inside and boil.
  • Rinse thoroughly under the tap, pour clean water and boil again.

There is another way to use. It is necessary to pour 3/4 of the water into the kettle and boil. After pour 100 ml of purifying fluid and leave for 15–20 minutes. Then rinse under a stream of water.

Thoroughly wash the kettle from a chemical tool so that its residues do not go into tea and coffee.

Why do you need to clean the kettle of rust

In addition to an unattractive species, which gives the dishes a reddish-brown plaque on the inner walls, rust significantly worsens the taste of water. As a result, tea and other drinks acquire a taste of metal. But this is not the only and not the most terrible trouble to which the appearance of rust leads. In addition to an unpleasant taste, when using water from a rusty kettle, there is a risk of facing the following problems:

  • The plaque on the heating element in electricals slows down the process of boiling water. As a result, the water boils longer, and the electricity consumption increases several times.
  • With untimely cleaning of the inner surface of the teapot from rust and scrap, they corrode walls and soon the dishes are unusable.
  • Water with rust can cause serious harm to human health. The rust gradually accumulates in the body and damages the internal organs: stomach, intestines, liver and genitourinary system. The systematic use of such water for the preparation of food and drinks can cause serious diseases.

All of the above does not mean at all that when a rusty raid on the walls of the teapot appears, it must be immediately sent to the garbage bucket. There are proven ways to eliminate the plaque completely even in the most advanced case.

What is worth it and not to do

If you use all the possibilities too much, then the kettle can simply be spoiled. For cleaning, it is necessary to use only proven methods that will not harm the very coating and their own health.

You cannot use strong substances based on sulfur or hydrochloric acid for cleaning and removing contaminants. They are too aggressive and can ruin the metal.

remove, rust, electric, teapot

It is also impossible to rub too much with metal washcloths, torn or knives. This not only will not help remove rust, but will also be a catalyst for its distribution.

Author

Laidred

| Denial of responsibility | Contacts |RSS