How to refuel a zanussi washing machine

Weak places of Washing Machines Zanussi

Using the statistics of service centers, you can quickly understand which nodes and parts in the device of the Washing Machine are the most vulnerable

• Dependence of parts on water quality. By the way, this is characteristic not only for the brand of Zanussi, but also for other cars. During salts, water, with severe heating, settles with a cape on the heater and other elements. The water in our water pipelines also does not differ by purity, so the machine filtration systems can be clogged over time with dirt and rust. As a result, a typewriter and drain system suffers.
• Luke’s block. This is already the fault of the manufacturers: both the lock and the sensor are slightly unfinished, so they break more often than that of the cards of other brands.
• Heater (Ten) quickly grows up. Experts believe that this also happens due to the fact that manufacturers have lost the components of which the tubular part of the heater is made in the selection of the components.
• Drive belt. No reliability is not distinguished, so every 3 months it will not hurt to check its tension and integrity. If you see signs of stretching or damage to the belt, pulling or replacing the node is required.

It is only good that it is possible to determine the malfunction on time, since the “smart” washing machine of the zanussi notifies the user about problems using fault codes.

Review: Washing machine Zanussi Aquacycle 1000. the best washing machine and not to find.

I have long wanted to write a review about my beloved assistant-washing machine Zanussi Aquacycle 1000. The machine serves me faithfully for many years, namely from 2002.

The width of the washing machine is 60 cm, height 85 cm, depth 45 cm. Maximum drum loading 4.5 kg of dry linen. Maximum selection of 1000 revolutions per minute. For a family of 4 people, a car with such parameters quite fit.

Before you start using a new washing machine, you need to carefully read the instructions for use.

Correct connection and installation of a washing machine, the key to the long and good work.

The most important thing is to deal with the control panel. The instructions describe in detail all the buttons and their functions.

The dosage of washing powder and rinse additives plays an unimportant role. The amount of powder depends on the weight of the laundry.

For all years, many deposits have formed on the dispenser. They are cleaned with great difficulty. Periodically you need to clean not only the planner, but also the filter of the bulk and drain hose.

The filter of the drain hose is simply unscrewed and washed under a stream of water.

Luke seal must be checked for the presence of foreign objects, such as buttons, paper clips, etc. D.

The washing machine made 4-6 washes a day when the children were small. I can’t imagine the best assistant.

We proceed to the wash

Before starting the washing machine, be sure to make sure that the water supply crane is open to the tank. If this is not the case, then the selected wash mode will simply not function. After checking, connect the machine to the mains and load linen into the drum.

When the loading of things is made, you should decide on the program corresponding to each specific case and load washing powder, air conditioning, stain in the proportions recommended for the launched mode for detergents for detergents for detergents.

The preparatory process is completed, you can proceed directly to the washing. The selector handle needs to select a specified program in advance, after which the machine is launched by the user. It remains only to wait for the process to be completed, and remove pure things from the tank for further drying.

We are responsible for choosing funds

Household chemical stores are full of various types of special impurities, additives, powders, gels, reagents, capsules used in the washing process. We will figure out what means can be found on the shelves of supermarkets, this is:

• universal products suitable for washing of any category of things;
• powders with the addition of bleaching granules;
• washing powders separately for colored, separately for white or black things;
• synthetic substances without impurity of enzymes and other additives;
• means containing biological additives, in particular, enzymes;
• Substances that provide high quality washing in cold water (up to 30-40C).

Liquid detergents, in comparison with powders, are preferably rinsed from fabrics, are characterized by increased Active particles. Along with the main washing powder, you can additionally use bleach, airplane conditioners for linen, stains.

The hostesses studying the composition of detergents will be interested in knowing what exactly is the effectiveness and quality of washing in a mixture of surface-active substances in a mixture of surface-active substances. Other impurities that can be listed on the packaging are flavorings, coloring additives, substances that prevent the appearance of scale, fragrances, etc.

Mistresses would like to list the popular types of detergents that help cope with the most common contaminants on clothing. So, we will tell you with the help of what means you can well remove various kinds of spots.

• BI-MAX “100 Springs”, has the highest common score in the rating of comparison of washing powders, copes well with spots from drinks, food. In the effectiveness of washing grass, dirt, fat spots from clothes, an average rating is assigned. Satisfactorily removes traces of cosmetics from things.
• Eared nanny will get stains from food, traces of dirt, herbal blots, circles from spilled drinks. It is worth noting that the powder will not cope with traces of cosmetics and paint poorly.
• Tid Alpine Freshness stably removes the spots obtained during the meal, mud and herbal traces on clothes. The efficiency of removing fat spots and traces of drinks average. Traps tolerably with prints of cosmetics and paint.
• Biolan Color. has an assessment similar to the previous product, is in a comparable price range comparable to it.
• Ariel “Color Lenor Effect” perfectly removes food pollution from clothes, will get stains from grass and street dirt well. Characterized by the average level of cleansing of traces of drinks, fat spots. It will not cope with blots from cosmetics or paint.
• The myth “Frosty freshness” is characterized by the properties similar to Teda, it will only cope with food traces and street spots.
• Dosiaactive 3 cleans the pollution obtained during food, removes traces of grass and dirt. Poorly removes spots from carcasses, creams, lipsticks and other cosmetics. Tolently copes with the paint from the paint.

We hope that the review of special washing programs will help you understand the modes and competently operate the unit. The above tips will teach the correct handling of the washing machine. The presented information about the categories of detergents will facilitate their choice.

Share your opinion. leave a comment

Where is the filter of the smell pump zanussi?

The car with a front loading car is located in the lower right corner. Unlike models of other manufacturers, there is no need to remove the lower bar, and just pull the lid over yourself with your hand or with a flat screwdriver.

In models with vertical loading, the situation is even easier: the part is located at the bottom of the drum and looks like a lattice container where garbage accumulates.

Expert advice on where to fill the powder in the washing machine

In each instructions of the manufacturer for the operation of the automatic machine there is information about the rules for loading household chemicals to obtain an effective washing result.

If there is no description in Russian in the documents, they are lost or the unit is acquired, which was in use, the clues of professionals and experienced housewives will help to deal with the function of cells in the tray.

About where to fill the powder (as well as pour gel, place capsules, tablets, etc.D.) in the washing machine, we will tell in the article.

How to correctly in which compartment, cell?

All funds are loaded into the tray (cuvette) of the washing machine until the program is launched. If the hostess forgot to add some tool, it can be added later, if the washing stage with its use has not yet begun.

The tray is made of plastic. Its front panel has the color of the case, the inside of a white or gray shade.

Description of the cells of a typical retractable dough:

The cap with the max label (overflow valve) is not a dispenser, it shows the maximum amount of the product that can be poured into the compartment for the air conditioner.

The curtain (special partition) in the cell for the main cycle is necessary for the transition from the liquid detergent (it is lowered before pouring it) to the bulk (raised) and vice versa) and vice versa) and vice versa).

The number, structure and location of cells for household chemicals in various manufacturers may differ.

What will happen if you load the wrong department?

According to manufacturers and employees of service services, the use of the tray compartments will not harm the washing machine for not for the purpose. If the hostess mixed the cells and the powder hit, for example, into a cell for the air conditioner, only the quality of washing will suffer.

Lucky will not only not get rid of pollution in the process, but also receive a soap solution when rinsing. This will lead to additional consumption of household chemicals, electricity and water. The unit will have to load again and repeat the washing cycle.

Differences for automatic machines with different loading

A significant difference between washing machines with vertical and horizontal loading is the location of the tray with cells for detergents, whitening and softening means.

In units with vertical loading, the container is located directly in the hatch. Minus of such models: adding the product after the start of the program will not work, you can temporarily stop. In modern models, manufacturers added the function of the proofs.

Is it possible to pour right into the drum?

To answer this question, you must contact the instructions of the manufacturer of the washing machine.

In most cases, this is not recommended to do this, the exception is some types of household chemicals for washing children’s underwear.

It is strictly forbidden to fall asleep stains and whitters into the drum, they are used only in the specially designated cell cells.

The granular structure and a more aggressive composition of bulk products is not the best option for the neighborhood with tissues, mechanical damage and partial loss of the original color is guaranteed to them.

It is better to fill the powders into a special compartment from which it will be washed, is dissolved along the transportation path and is evenly distributed in the drum.

If the hostess is sure that in the drum the bulk product will bring more benefit, then it is necessary to place it in a special container (device in the form of a ball with holes), often it comes with a washing machine.

Dosage

Information about the recommended amount of funds can be found in the instructions of manufacturers of household chemicals of washing machines. If you study them there is no way, there is a proven standard: 1 t. l powder (25 g) per 1 kg of loaded laundry.

The quantity can be doubled if:

• The degree of pollution of the linen is high, there are old spots;
• The quality of the water is inappropriate, it is rigid;
• The washing program of a certain type of linen requires more water consumption.

Where you need to place gels, capsules, plates?

Liquid washing products (gels, concentrates) can be used in several ways:

Before loading the product into the drum, it is necessary to study the recommendations of the manufacturer. In some models, this is strictly prohibited.

Direct loading of industrial fluid is undesirable if:

• It contains whitening particles, direct contact leads to the formation of stains on the fabrics;
• The composition contains components that prevent the formation of scale, in this case they do not give an effect;
• Dry powder is already loaded in the compartment for the main washing.

Capsules, tablets, plates are more convenient to use, one thing is enough for washing with loading up to 5 kg. They are placed directly in the drum before starting the unit, linen is placed on top. They dissolve quickly, distributed evenly.

Tablets for washing can be placed in the compartment for the main washing. But the housewives note that they most effectively cope with pollution when loading into the drum.

Parsing the front washing machine Zanussi

Typically, the body of washing machines consists of the upper cover, front, rear and two side panels. Sometimes the lower tray is found. The technique of Zanussi is slightly different. instead of four panels, the case is divided into two halves connecting on the sides of the washing machine.

To disassemble the technique, you need to perform the following actions:

• Unscrew the screws, slightly push back and raise the top cover.
• There is a metal plate under the lid in the middle, at its edges there is a fastener holding the front and rear panels. It is necessary to twist it.
• On the sides of the car at the joints of the panels are plastic plugs. They need to be placed and pulled out. There are screws under them, they will need to be unscrewed.
• Two more screws on some models are located below on the back of the washing machine. They also need to be removed.
• Now both halves are recorded only by a plastic holder. To remove it, you need to carefully squeeze the latches. Sometimes it can consist of two shelves connected by a screw. Put the fasteners, squeeze the latches, after which the holder rises up and removes to the side.
• Now you can move and remove to the side of the back half of the case.

Partial disassembly of the washing machine is completed. Now the owner of the device gets access to the motor, pump, heating element, belt and many other nodes for repair or replacement.

In some cases, for example, to replace the bearing, it is necessary to completely disassemble the washing machine Zanussi.

• First you need to turn off the wiring from the heating element and engine, press facilities and pump, water intake valve. It is recommended to mark the wires or take a picture before disconnecting. If errors in its connection are made during assembly, this may lead to serious consequences.
• Remove and pull out the temperature sensor.
• Unscrew the upper counterweight.
• Turning the pulley, remove the drive belt.
• Squeeze the clamps, disconnect the nozzles.
• Unscrew the fastener.
• With light blows on the pulley and remove the engine.
• To unscrew the nut between the contacts of the heater, carefully so as not to break off the contacts, pull out the heating element.
• Unscrew the tank racks.
• Disconnect and remove the press.start, unclench the clamps, free the bulk pipes and pull them together with the valve of the water bay.
• Unscrew the drain pump, disconnect from it and remove the hose to the side.
• Disconnect the pipe in the upper part of the tank.
• Open the hatch, pull and pull the cuff on yourself. Put the clamp with a screwdriver, find and unclench the latch, remove the clamp.
• Pull the upper part of the cuff, find a watering pipe, unclench the clamps, then disconnect the part.
• Unscrew the interference filter.
• Unscrew two screws, stick your hand into the tank and pull out the hatch lock device.
• Close the hatch, unscrew the fasteners, remove the hatch.
• Pull the cuvette for detergents, unscrew the fasteners under it and from above, holding the control panel. Unclench the latches, disconnect the wires, remove and remove it.
• Remove the tank from the springs and pull.
• Disconnect the counterweight.
• Put the water tank down with a hatch down, block the pulley, unscrew the bolt. If it does not give in, grease it WD-40, wait a while, and then repeat the attempt.
• Take with both hands by the pulley and, rocking to the sides, separate it.
• If the tank is collapsible, unscrew all the screws and remove the upper part.
• If it is indispensable, choose the screws with which it will be connected during assembly and drill holes under them along the seam of the tank. Next, cut the tank on the seam.
• In place of the screw holding the pulley, screw a similar old screw and knock the shaft at right angles at right angles.
• After that, you can pull the drum from the bottom of the tank.

Now you can disassemble the drum, replace the bearings, inspect and clean the shaft and cross, as well as perform other work. Full disassembly of the washing machine is completed.

Zanussi program table: Description and designation

On the washing rooms, Zanussi are practically no different from other models. Around the rotary toggle switch are drawn icons, the descriptions of which you will find in the table below. Basic and additional modes allow you to effectively take care of underwear.

You can choose the Zanussi mode for a separate type of fabric or according to the degree of contamination of things.

The table gives approximate time frame. The duration of the cycle can change within these limits or go for them. it depends on the specific model. Look in the instructions for your typewriter. in the majority there are also time expenditures in the program.

Washing modes in Washing Machines Zanussi

To maximize all the capabilities of technology, you need to understand what the washing modes in Zanussi washing machines and for washing what linen should be used. Despite the variety of the model range of this manufacturer, the programs do not differ significantly and with rare exceptions they can be found on almost every machine.

Each Zanussi washing machine has a program for switching programs. The modes are indicated in the form of conventional icons, their description can be found in the manufacturer’s instructions. A large number of programs are explained by the fact that each type of linen is recommended different water temperature, various speeds during spinning, washing algorithms, etc.D. So that the laundry is not only as clean as possible, but also does not spoil in the process, it is necessary to use a careful mode, as well as follow the recommendations on the label of things.

Zanussi washing machine can have the following washing programs:

Cotton

Most often used for everyday washing. On Zanussi machines with symbols near the selector is represented by an icon with a cotton box. Washing the linen is carried out at a water temperature from cold to 90 ° C, seas out at maximum speed or in accordance with the user installations. The duration of the cycle is from 120 to 175 minutes, depending on the selected water temperature.

Synthetics

This mode is indicated by an icon similar to a flask. It is recommended to wash synthetic and mixed tissue types on it. The maximum temperature threshold is 60 ° C, the maximum or at the discretion of the user.

Additional mode can be used only in combination with the main. Indicated by the icon with the image of a tree and is designed to save resources. For example, when choosing a cotton 60 ° mode, the technique will wash the laundry not at 60 °, but at a lower temperature, but for greater time. Due to this, the same results are achieved as at 60 °, and electricity is also saved, because water is heated to a lower temperature. The duration of the cycle, as well as the revolutions when spinning, depend on the main program.

Delicate

Flower icon mode. For thin or lace linen, which needs careful attitude. Also in this mode you can wash things with the designation “manual washing”. The water temperature is 30 ° or 40 ° C, seas out at low speeds, the drum in the course of work, the Zanussi washing machine rotates very slowly. Washing time from 65 to 75 minutes.

Manual

In this mode, laundry is erased with a note “manual washing”. Indicated by the icon with the image of the hand lowered in the pelvis. The process is performed in cold water or at 30 ° C. The car does not squeeze things out to prevent damage and damage.

Jeans

The mode is designed specifically for jeans fabrics to prevent their fading and molting. Indicated by a icon with the image of jeans. Execution time. up to 140 minutes.

Wool

The program with the image of a coil of wool is intended for washing woolen or silk things. It is performed at 30 °.40 ° C for 50-60 minutes. Fabrics are squeezed at low speeds.

Children’s

Used for washing children’s things at 30 °.40 ° C. The peculiarity is that additional rinses are added here to completely wash the detergent.

Hygienic

It is performed for 120 minutes at 90 ° C and is designed to remove allergens and dust ticks. Several additional strips are used to completely wash the powder from fabrics.

Blankets

For blankets or other things with various types of filler. Length. from 65 to 75 minutes, water temperature. 30 ° or 40 ° C.

Shoes

In this mode, you can wash sneakers or sneakers at a low temperature of 30 ° or 40 ° C. Zanussi machine squeezes shoes at maximum speeds, several rinses are also added.

Night

Designed for people whose electricity and water are rated at night at smaller prices. The program is very quiet, all stages of spin, both intermediate and basic, as well as draining water are excluded from it. After completion, the Zanussi washing machine stops with water in the tank. The user activates the seaside and drain on his own. Execution time. approximately 120 minutes.

Preliminary

An additional option is applied only in combination with the main regime of “cotton”. Used for clothes with strong pollution. When activating, it is necessary to properly load the detergent into the cuvette. It is loaded in 2 compartments: for the main and for preliminary washing.

Express

Other options for the name of the program are “fast”, “daily”, etc.D. Depending on the model of the washing machine and on the program option, the process lasts 30-60 minutes. Designed for refreshing and washing things with weak pollution. Water heats up to 30 ° or 40 ° C, seasily. maximum or to the choice of the user.

Disposing stains

Spots display. In a special compartment in the cuvette of the Zanussi car, you need to add a stain. Water heats up to 40 ° C.

Additional rinse

The option is activated at the request of the user in combination with the main program. Allows you to better wash the detergent of fabrics. Designed for allergy sufferers, people with sensitive skin, children, as well as situations when a large amount of powder or liquid is added.

The mode is used if it is necessary to emergently drain the water from the tank of the Zanussi washing machine, for example, during a breakdown.

Supervision

Used as a separate program. Chosen in cases where you need to re.squeeze things. Speed ​​maximum or at the discretion of the user. Execution time. from 10 to 20 minutes.

Indication of malfunctions through the LED start/pause

• Turn off the washing machine.
• At the same time, press and hold the buttons 3 and 4, and turn the program selector for one position to the right.
• Hold the buttons pressed until the zummer sounds (if there is) and/or the LED lights up.
• Using a program selector, you can check any function according to the table below.

Error codes

Type of malfunction elimination