Home Small appliances How to put a filter in a samsung vacuum cleaner
Small appliances

How to put a filter in a samsung vacuum cleaner

A motor filter for a vacuum cleaner. a review of frequent questions

In addition to a bag or container for collecting dust, in a vacuum cleaner of any model other filter elements are also provided.

filter, samsung, vacuum, cleaner

Additional filters are designed to protect the electric motor compartment from dirt entering it and cleaning the air out of the vacuum cleaner.

The clogging or damage of any of the filters is fraught with overheating of the engine and the failure of the device. Therefore, it is important to monitor the condition of all the filters of the vacuum cleaner and regularly change them in case of wear.

How to clean the filter element in the Samsung device?

To ensure the highest quality cleaning, modern Samsung vacuum cleaners are equipped with a multi.stage filtering system consisting of:

In order for a household device to work without interruptions, each filter must be cleaned in a timely manner and correctly.

Cyclone (with a container for collecting dust)

A plastic container of a cylindrical shape with a lid and a handle, into which dust and garbage from the air settled under the influence of centrifugal force, is called a cyclone filter in Samsung vacuum cleaners is fixed on the side of the case).

Cleaning the flask is very simple:

  • Disable the device from the network of electricity.
  • Pull the container from the vacuum cleaner case by the handle.
  • Open the container, shake out garbage and dust.
  • Using a soft sponge and a soap solution, clean the walls of the container from dirt, rinse it under running water.
  • Having waited for the container complete drying out, we cover it with a lid, install it in the same place.

If water got into the cyclone filter in the process of cleaning, the household device must be turned off right away, remove the container and clean. Otherwise, dust and garbage, mixing with water, compress, clog the filtering element, which significantly reduces the absorption of the vacuum cleaner.

Aquafilter

The air filtration system using water (aquafilter) is partially (1/3) filled with water, a container inserted into the vacuum cleaner case. Passing through the waterfilter, the dust from the air is moistened and settles at the bottom of the container.

To clean the aquafilter, you need:

  • remove the container from the housing of the household appliance;
  • open a container;
  • pour dirty water;
  • rinse the container under running water.

Aquafilter is cleaned after each cleaning. Otherwise, you will have to make a lot of effort to get rid of the musty smell of stagnant dirty water.

The air filter of the thin cleaning rests the smallest (up to 0.6 μm) dust particles. You can find a negligent filter on the rear panel of the vacuum cleaner behind a special grill (looks like a dense accordion made of fibrous or polymeric materials, nested in a plastic frame).

To clean the non.filter, it is necessary to carry out a number of consistent actions:

  • Disconnect the vacuum cleaner from the electricity network;
  • open a lattice hiding the filter element;
  • extract a filtering accordion from a plastic case;
  • carefully clean the filter with a soft brush, and then rinse under running water.

After cleaning the filtering accordion, you need to dry well. Only after drying it is installed back in a plastic case, and then in a vacuum cleaner.

Foam rubber

The filter of thin cleaning made of foam rubber is installed in front of the Samsung vacuum cleaner engine. Caring for a foam filter element is very simple:

  • Disable a household device from the network of electricity.
  • Open the cover of the vacuum cleaner, take out a bag for collecting garbage (in some models a plastic container is installed instead of the bag).
  • A plastic frame with a handle is found under the vacuumber, in which a foam filter element is embedded.
  • Remove the filter, moisten it with water, soap it with household soap, rinsed under running water.
  • A well.dried detail is returned to the same place.

So that the foam rubber does not break, preserves the shape, after washing it cannot be squeezed out, stretched or twisted. Foam rubber must be carefully laid out on a flat surface and allowed to dry in a natural way.

Carbonic

Premium class Samsung vacuum cleaners are equipped with a special coal filter. This plastic form, filled with pressed coal granules, delays not only dust particles, but also unpleasant odors (which is interestingly interesting even when the vacuum cleaner is turned off).

Despite the fact that the coal filter is quite expensive, it can only be used once. The maximum that can slightly extend the period of its operation is to clean with a soft brush of small particles of dust from the outside of the case.

Stages of filtering in vacuum cleaners

The vacuum cleaner sucks air and garbage due to the operation of the turbine installed on the electric motor. So that all particles do not pass through it, as through a pipe, as well as not to clog a turbine and an electric motor, several stages of filtering are implemented in it:

Gross cleaning or where garbage is stored

Typically, the function of the first filter and garbage drive is performed by either a plastic container (in more expensive models) or a garbage bag (more common in cheap models). The bag can be made either from dense fabric, in which case it is reusable, or from filter paper. it is one.time. The bag is installed between the input hose and engine filter.

Paper bags are convenient in that they do not need to shake them. they removed the apartment and threw them into garbage, but you need to constantly replenish their stocks. Fabric bags are reusable, but they need to be shaken every time, and sometimes cleaned with a brush with a hard pile from accumulated dust deposits.

There may also be a tank with water created for the same purposes that are described above.

Thin cleaning

A filter is installed between the garbage tank and the turbine engine to delay small dust particles. Often it is made of a fiber pressed into a thin sponge or from a material like a foam sponge. Its task is not to miss large particles into the engine compartment.

At the exit from the vacuum cleaner, a third filter for microscopic particles is installed. It is needed so as not to blow out the dust from the vacuum cleaner, which did not detain the bag and engine filter. In this case, they use sponges from pressed fibers in the cheapest models, or HEPA filters (English. High Efficiency Particulate Air) in the models of the middle and high segment. Coal filters can also be used. they purify not only air of dust particles, pollen and dust ticks, but also from unpleasant odors, which is especially true in the apartments of smokers.

How to clean a vacuum cleaner?

In addition to filters, the vacuumber is subject to the mandatory cleaning of the vacuum cleaner, in addition to filters. Depending on the model, the Samsung vacuum cleaner can be equipped with a paper or fabric bag for collecting dust and garbage.

Paper vacuumers. disposable. After filling, they are simply thrown away. Fabric garbage bags can be used more than once.

In order to clean the fabric bag, you need:

  • Grind the vacuum cleaner from the case (the device is pre.disconed from the electricity network).
  • Gently remove a plastic clamp from the bag.
  • Covering the upper part with a plastic bag, shake all dust and garbage from a fabric bag.
  • Additionally peel the fabric bag with a soft, damp brush or sponge.
  • Pull the edges of a clean vacuum cleaner with a plastic clamp, install the bag in the same place.

All work on cleaning the fabric vacuum cleaner is carried out on the street or in the utility room.

Motor and output filter processing

After removing the dust collector, they begin to process the filter, which is immediately behind it or under it (depending on the vacuum cleaner model). It protects the engine from dust flying from a container or bag. To extract it, you need to pull the body. The engine filter is made of foam or pressed synthetic fiber.

There are 2 additional filters in cyclone vacuum cleaners. The part under the vacuumber consists of a sponge and a solid plastic grid. Before him. only from foam.

Only the foam layer needs regular cleaning. They conduct it like this:

  • Sponge is removed from the plastic case. A fishing line passing through it for a trimmer with a ring is cut (if any).
  • The filter is washed with warm water, and then additionally cleaned with soap. You can’t unscrew and strongly squeeze the foam.
  • After rinsing and drying, the foam part is returned to the place.

The plastic grid is wiped as necessary. With strong contamination, it is removed and washed in a pelvis with powder. The pressed filter is only blown and shaken out.

filter, samsung, vacuum, cleaner

A year later, and with frequent cleaning and earlier, the engine filter is replaced by a new. The main wear of the upper protective layer is instant heating of the device after included in the network.

Filter With Grid for Vacuum Cleaner Samsung DJ63-01211A (08898)

Like spray bags, thin cleaning filters are reusable and disposable. The latter, made of paper, become unusable after several gleads. Care for reusable parts of the technique depends on the material from which they were produced. So:

The output filters made of foam rubber are on the way of air out of the vacuum cleaner, wash and dry, like protection of the electric motor.

If, when stripping in the water, add the air conditioning for linen, during cleaning the vacuum cleaner will additionally refresh the air.

A non-filter from fluoroplast requires a special approach:

  • At first, the protection element is placed with an accordion down and slightly knocked out.
  • Then, without changing the position, they lower it into a warm soap solution and leave in it for 20 minutes. With minor contaminants, simply rinse with water.
  • Intensive movements up and down, the filter is washed in the wash, and then in the same way. You can’t rub the accordion with a brush.
  • Pure part is put on drying fabric. It should be noted that it takes a long time due to the presence of several layers in the filter.

Neo-filters change and clean no more than 1 time a year. Foam elements. after each cleaning.

When you need to clean the bag

The quality of the cleaning drops noticeably when the vacuumber is clogged. This is due to the fact that the absorption of vacuum is reduced. If you find that the device has become worse to draw dust, then it’s time to change the collector.

For bags of bag type, the role of the primary filter is assigned to the bag for collecting dust. The cleaning procedure comes down to dust removal from this constructive element. The maintenance of the device requires compliance with safety precautions, accuracy and is carried out in rubber gloves. The cleaning of the bag filter from fine debris and dust begins with the device off from the network.

In vacuum cleaners with a disposable vacuum cleaner, the bag filled with dust is subject to disposal, for which it is neatly removed, placed in a plastic bag and goes to the garbage tank. The place of the spent consumer is occupied by a new.

For vacuum cleaners with a reusable bag filter, the care procedure is different. The procedure for cleansing the reusable bag is given below.

Step.by.step instructions for complete disassembly

Partial disassembly is carried out when replacing or cleaning the filters, but to get the engine, you need to disassemble the device completely. We offer a detailed photo instruction on disassembly, which will help you do your own repairing the Samsung vacuum cleaner.

Stage #1. We diagnose breakdown

When you use one device for a long time, you perfectly imagine how it behaves during work.

An experienced user does not have to look at the indicator of filling the bag or tank, he even determines the sound time of the vacuum cleaner or filters. Therefore, the fact of a malfunction he will also determine on the unusual behavior of the assistant.

If a rested vacuum cleaner begins to buzz or hiss, then the mechanism with a broken engine or a board makes intermittent sounds, begins to “spit” dust, smell of burned wires or simply does not respond to the network.

If you doubt the serviceability of the vacuum cleaner, you can try to make it out. This is a simple procedure that does not require special knowledge and special skills. As instructions, you can use videos or skills of craftsmen, carefully shot by them and the Internet posted on the Internet.

Stage #2. select tools and materials

For disassembling the vacuum cleaner case, you do not need to purchase a special tool. Most likely, a pair of screwdrivers, cross and sludge, which can be found in the economy of any citizen or rural resident will come in handy.

For disassembling filters, the tool is not required, as this is a regular service procedure. You just have to manually remove the lids or open the plastic boxes.

In some models, to change the HEPA filter, remove the rear grill, unscrewing 2-4 self-tapping screws also using a screwdriver.

But if there are manipulations with the engine, elements of the board, wires, the following tools and materials may be required:

Small details are inexpensive, but a faulty engine requires replacement-this is an average of 1650-2600.

Instead of an expensive original part, you can look for an alternative mechanism, but you should pay attention to the materials from which it is made

Stage #3. Dismantle the vacuum cleaner body

It often happens that in the process of disassembling the device there is a problem, that is, not necessarily the cause of the breakdown is the failed engine. Perhaps the thermallane connector has departed or damage to the board occurred.

All actions can also be performed by an unprepared person, since the analysis of this model requires attention, accuracy and the ability to use screwdrivers. flat and cross

The vacuum cleaner is one of the most common household appliances and is available in every house. Being an indispensable assistant in cleaning the premises, the unit itself also needs constant care. Therefore, because how correctly and timely it is cleaned, the quality of the cleaning and life of the device depends.

Samsung DJ61-00445B Cyclone filter or made from a vacuum cleaner with a bag. Vacuum cleaner “Cyclone

We have a vacuum cleaner Samsung SC7281, a regular vacuum cleaner with a bag for collecting dust. I knew that this nozzle would suit, because my parents have one, it came to their vacuum cleaner. I suspect that it is suitable for many vacuum cleaners of Samsung.

The filter was ordered on January 27, paid for bank details with a card, it was cheaper for me, you can pay for cash on delivery. The order was sent on January 31 (although I received the track only February 4), I received it on February 10, t.e. 2 weeks after payment.

Unfortunately there is no photo packaging, t.to. I did not plan to do the review, but after a month I decided all the same. But it was packed very well: a hard box, and in it, wrapped in 2 meters of pimpark, a filter.

Photo of a vacuum cleaner:

Photo of a vacuum cleaner with a cyclone filter:

Well, photo of the filter itself:

Dimensions:

Cleaning Filters on a Samsung Vacuum Cleaner.

The weight:

Inner diameter of the upper tube of the filter:

The waist diameter of the lower filter tube:

We usually vacuum the palace once a week, and now the time has come to sprinkle it. Cyclone in action:

This is what remains in him:

And now the most interesting. Here are a bag that we vacuumed already 4-5 times: it is almost empty, if not for a cyclone, during this time it would have to be replaced. A set of bags costs 450r. for 5pcs. go somewhere in half a year. And then one bag can be enough for a year or two.

So the advantages: 1) reduces the costs of bags 2) increases the power of the vacuum cleaner (due to the fact that the bag is always empty on average, the absorption power is higher) 3) it is easy to throw dust and wash

Well, there is one drawback: 1) a very strong statics from it.

If you have a Samsung vacuum cleaner with conventional bags and with the same pipe mount, then I recommend it to buy.

Cool, I did not know that there was such an upgrade. In truth, I have forgotten what bags are for 10 years. Around the early 2000s, they bought Samsung with exactly the same cyclone and an ordinary container instead of the bag, but it still has to be washed, a sponge for fine dust is present. There are almost no statics, the material is not plastic, I don’t remember what is called, very durable. The minus of this upgrade is in cheap plastic, and so super of course.

Around the early 2000s, they bought Samsung with exactly the same cyclone and an ordinary container instead of the bag, but it still has to be washed, a sponge for fine dust is present.

It seems to me exactly the same. Healthy, green, also bought in the 2000s. He also has a smooth speed adjustment and a filter in the form of an accordion sponge. Well, a double cyclone. on the tube and inside with the handle compartment.

Samsung Cyclomax VC-8716VT is called. Once every 3-5 years you need to change a sponge with an accordion, for 400r. It works like a clock, there is nothing to break.

Photo from the Internet:

Once I found a new one on Avito, I went to the authorized Samsung service centers twice, and in different cities. There is usually no available, but without problems they bring to order in a few days. Article DJ64-00170A

The comrade with this glass over time (about 8 years) became fragile and cracked at the slightest fall.The new one was able to order and buy only in one service center, it cost 1200 and the form of plastic in another, more transparent The receiver said that the Koreans learned to do plastic, which is aging in 3-5 years.

I have exactly the same, only with the spraying of silver still. Great filter! But I use Thomas TT with a washing vacuum cleaner.

Feo-man, and what is the trick on Thomas this bastard? I have T1, and as I understand it, you need to wash both the container and the filter after use.

Thomas Twin TT has no bag. There is a water filter. But he can quickly clog with dust, and the nozzles of a water filter stop working, then the khep filter begins to clog. Immediately all the muck remains in the cyclone, and the filter of the nozzles of the water filter does not score. Hepa has been serving for years, and everything is beautiful.

A vacuum cleaner with such a filter is a cool thing. I have been using this. Samsung SC5355 for about 5 years

At first it was very surprised how much dust turned out to be a seemingly clean carpet. If it were not a cyclone and its visual filling, I would not even believe it at once)))

Expensive or cheap. it’s hard to judge now, in the light of the last rise in price (I am my vacuum cleaner for 3000r. bought in 11-12). In any case. the purchase is very useful. Congratulations.

From a hygienic point of view, disposable bags are the most beautiful option: took off and threw. And don’t wash anything and shake anything. I have enough bag for 4-5 harvesters, this is about a month. 3 per month for not seeing any more dust that sucked a vacuum cleaner, as for me, justified. But there were times when I shook the bags, lifting dust clubs. And Aqua Filter washed after each cleaning. As a result, he returned back to the good old bags, only in one.time performance. And for more than a year has never regretted this. Hepa Filter, by the way, is still as new. But if you use a reusable bag, then this stray must definitely be. It’s much easier and faster to rinse the glass than fiddling with the bag.

filter, samsung, vacuum, cleaner

Samsung vacuum cleaners filters

Hello. Since the topic is relevant for many Samsung vacuum cleaners SC65/66/67/68, I decided to make a short review for filters for them. Samsung vacuum cleaners of the SC65/66/67/68 series belong to cyclone vacuum cleaners in which 4 more filters are installed after the vacuum cleaner: foam (as it were), cellulose, intermediate (this is not a filter, but a net to prevent randomly getting large garbage into the pump ) and, after the pump, non-filter. Neo-films are a special pain of all vacuum cleaners and therefore I will not touch them, but I will talk about the first two. These two filters served in my vacuum cleaner for quite some time, but the hour came when they stopped fulfilling its function. the foam rubber lost its elasticity and began to literally “pour”, and cellulose also lost the rigidity of the rubber border and began to fall through the stubborn reinforcement. All this leads to intensive delaying dust on the internal elements of the pump, which then very intensively baking on them and exudes a very unpleasant odor, each turning on the vacuum cleaner. In addition, the safety grid is still very quickly clogged and I don’t even say about the non-filter-after that it must be thrown away. All the tragedy of the situation is that the non-filter can still be found in stores, but I have not met this couple, and only recently their clones appeared on Ali, at first their price was quite high-more than 12, and then more sellers became more And the price “fell” half. So, at the first impression, everything is beautiful and this couple is very similar to the originals, but having looked more closely, we notice that the overall dimensions of both filters do not coincide with each other. Perhaps this is not “crime”, t.to. The foam filter sits tightly in a plastic frame and easily takes its shape, but it caught in the eye. A foam filter, upon careful examination, more resembles not foam rubber, but a cellular structure like a voluminous grid that is easily blown. The thickness of the foam rubber is half a centimeter thicker than the original original, the step of the corrugation coincides. The cellulose filter is a slightly compressed long fibers, I suppose cellulose placed between the two nylon small.horned nets, around the perimeter hung in a rubber border, which is simultaneously a sealing gasket. Filling with fibers more or less uniform when installing in the frame there are small gaps on two pointed protrusions, the thickness of the kayma is half a millimeter thinner than in the “swollen” original, but it seems harder in flexibility, which is good. Unlike the originals, these filters are not attached to each other on the one hand, but there is a place for fastening. Technological slots under the elements of the frame coincide. Assembled. And tests. We turn on the vacuum cleaner for a couple of minutes at full power, after which we take out the cassette with filters, turn it over, and we are convinced that “failures”, and no other artifacts are observed. Conclusion: if it is already “pierced”. a good option to extend the resource of a home assistant. Good luck to all.

Author

Kerariel

| Denial of responsibility | Contacts |RSS