Samsung MW63FR instruction manual online. Page 17
Samsung MW63FR instruction manual for the microwave device contains pages in Russian.
You can download a pdf file of this instruction: Download PDF
The “Memory” button allows you to remember the cooking time of any food and the corresponding power level.1. Press “0/MEMORY” button to select
1-3 procedure in memory. Number 1, 2 or 3 appears on the display.
If the procedure parameters have been set,
Press the “START/30 sec” button once.”To use the selected cooking procedure. Otherwise, enter the procedure parameters. The procedures can only use one- or two-step cooking.
After you finish entering the parameters, press the button once
“START/30 sec.”To save the parameters and return to standby mode. If you press the “START/30 sec.” again, cooking will start.
E.g. to memorize under number 2 the procedure,
which allows you to cook at 80% power for 3 minutes and 20 seconds, do the following.
1) In standby mode press the “0/Memory” button twice. On
2) Press the “TIMER” button once, then successively
Samsung Microwave ME19R7041FS
3) Press once the “POWER” button. Lights up on the display
line “PL10”. Then press the “8” button. The line “PL8” will appear.
4) Press “START/30 sec.” to save the settings.
A buzzer will sound once, after which the oven will go back to standby mode. If the “START/30 SEC.”again, the procedure will be memorized under number 2 and cooking will start.
5) If the power is turned on, the procedure will always
save. If the power goes out, the procedure will need to be re-entered.
6) To apply a stored procedure, in standby mode
Press twice “START/30 SEC ” button.”. 2 should appear on the display. Then press the “START” button.” again to complete the procedure.
If the button is pressed during cooking
“clock”, the display will show the current time for three seconds.
If the button is pressed during cooking
If you press the “POWER” button, the current microwaves power value will be displayed. After three seconds the oven will go back to the previous state. In a multi-step cooking function, the request function operates in the same way as described above.
The microwave is equipped with a special child-protection program that allows you to lock the oven so that children or people unfamiliar with the controls can not accidentally turn it on. The oven can be locked at any time.1. Locking. Standby mode for 3 seconds
TO PRESS THE STOP/PAUSE BUTTON. A long beep will sound to indicate the child lock is engaged and the display will show “
Unlocking the oven. In lockout mode
Press the “STOP/CANCEL” button for 3 seconds. A long beep will sound, indicating that the child lock is off.
END COnCInATIon dEvElOPMEnT COnT MODE
When cooking is finished, the buzzer will sound five times to indicate the end of cooking.
If the current time is shown on the display in standby mode,
Colon symbol “:” flashes. Otherwise the display shows the line “0:00”.
Do not let it beep
This post is for the very, very beginners who might be very interested to read here how others were able to make a counter electron-positron beam gas pedal from two women’s magazines, a grandfather clock and blue duct tape, but are not yet ready for it themselves. It’s like you’ve got your hands in the right place, but you can’t seem to get excited about an idea and then implement it. But it would be nice to start somewhere.
Today we are going to defeat microwave (coffee maker, steam cooker etc.), the device that usually squeaks at every trifle event, though it makes no sense (with few exceptions, who do not need this note). Don’t let it beep!
Marketers, trying to increase sales of very similar products, have achieved that in our apartments, almost all devices flashing LEDs. But that’s easily defeated with a dark marker or duct tape. What to do with the useless squeakers? Make them quiet or turn them off!
- unplug it (and don’t forget to remove the disk, which usually spins everything, so as not to break when you turn it upside down),
- Remember that although the device is unplugged, but theoretically it can electrocute (if there is any charge left), so we agree in advance not to feel all the insides with our fingers,
- carefully unscrew the self-tapping screws that hold the lid on,
- Having removed the cover, let’s see what is inside.
- add a resistor in series with the speaker (people who know how to do this probably haven’t read to this line),
- make the squeak more quiet by clamping the speaker diaphragm with something (someone put a piece of absorbent cotton there, someone pressed with the same blue duct tape, someone put some foam rubber around it to muffle the sound),
- Get rid of sounds altogether (disconnect one of the speaker pins),
- reassemble the device and forget about home comfort forever.
using tweezers we lift one of the contacts going to the speaker (it struggled a few 5 seconds and then came off), put any insulator under it (a piece of paper in the picture), close the device with a lid, carefully screw the self-tapping screws into the old jacks. That’s it, now the device works as before, but it does not beep.
If suddenly you need to restore this useful function of “waking up the baby who fell asleep in the next room”, the insulator can always be removed. It took me ten minutes, seven of which were spent scrubbing greasy kitchen dust off the lid.
Now you see that all those squeaky steamers and coffee makers can be made quiet. But who else needs to tear off a speaker?? That’s right, a home uninterruptible power supply! In fact, if I’m at home, I will notice the power outage and without his annoying squeak, and if I’m not home, then why annoy the neighbors, who not only suddenly had no electricity, but also from somewhere echoes a nasty squeak?
If you liked this start for the very, very beginners to making something with their hands, then in the next post I will show you how to make a “laptop phone charger” from a broken phone charger and an unwanted USB cable.
Комментарии и мнения владельцев Off on
I have such a combination of buttons does not work, but was able to turn off the sound after simultaneously pressing and holding the arrows to the left to the right. (Samsung Hotline told me to do so)
Pressing the “Stop” and “Start” buttons at the same time turns the microwave oven buzzer on and off.
Thank you very much! I specifically registered to thank you))
That’s my dream too. My husband even opened it up to find the right wire and cut it. Not found.
Checking the operation of the main elements
To find out why the microwave began to hum, it is necessary to check all the main parts and assemblies of the product. First, we disconnect the technique from the mains, then get the manual and open the diagram of the location of the parts to know exactly where they are located.
The first thing to do is to check the condition of this little guard of the electric circuit from various nuances. We open the protection container and inspect the filament, if it has burned out, the device must be replaced. Buy only a similar product with the same parameters. Don’t put bugs in. they are a fire source.
If the microwave makes uncharacteristic noises when starting up, this is the element that is broken. To check accurately, you need to connect an ohmmeter: the arrow deflected. everything is fine, the instrument is silent. you need to replace.
Capacitor must be discharged before testing, do not touch it in any way!
There is a small part in the high-voltage circuit that is easier to replace than to test. To check its functionality you can easily. the capacitor with a good diode is not heated. Microwave oven hum on start-up and a blown fuse are considered signs of a broken diode.
This main unit of the microwave generates a high-frequency electric field inside the oven, which is what heats the food. A characteristic sign of magnetron malfunction is an extraneous hum when the microwave oven is working, the food is not heated.
It is necessary to inspect the magnetron for fouling or cracks, replace it with a new one with similar specifications.
When it’s urgent to defrost food, the quick defrost feature comes in handy. Depending on the manufacturer, it can also be called “Rapid defrost”, “Turbo defrost”, or simply a button with two snowflakes and drips. There can also be a lightning bolt icon.
This option is suitable when you want to defrost products weighing up to 200 gr. The principle of operation is based on the work of high power. Be particularly careful here, however, because if the food to be defrosted is of a small size and weight, immediately after defrosting it enters the heating stage and the cooking process begins immediately. This may be an undesirable consequence of a quick defrost. Therefore, the condition of the food should be monitored.
While the microwave is running, it is normal if it makes a quiet humming or buzzing sound. This happens for several reasons, but most often it’s due to the magnetron vibrating (when the microwave heats up), the operation of a ventilation fan, or both.
In most cases, a long press of the Cancel or 0 button gives you access to sound programming, with which you can adjust sound settings and turn off the microwave. Whichever way you do it, switching your microwave to silent mode can make it quieter.
Where does the inspection begin??
Knowing the appliance that needs repair is a plus, but it’s often not very necessary. Having found the right one (or several) from the list of suspects of microwave malfunction, proceed to the next steps:
- The device is disconnected from the network. Trying not to touch the capacitor, carefully remove the cover located on the rear panel.
- Do the capacitor discharge, and even in the case if the furnace has not worked for quite a long time.
- Checking a fuse. If a loss of integrity is detected (the hairs are blackened and torn), the bulb is replaced.
- Examine the transformer: disconnect it from the contacts, then measure the resistance of the windings. The norm for them is 1.4 ohms (primary), 110-120 ohms (secondary), a maximum of 0.1 ohms (incandescence).
- A relay is connected to the bulb. Very bright light or its absence. symptoms of failure.
What to check first?
If the microwave hums heavily, you must immediately check the fuses. These parts malfunction more often than other parts. You don’t have to be an electronics expert. Failure of a fuse can be determined visually. In case of failure, it turns black and the string inside is torn. This defect is very easy to fix. All you need to do is install a new fuse to replace the burnt-out one.
But given that there are many different fuses available on the market, it’s important to have your old one with you when you buy it. Then the seller can pick up the right part with the required characteristics.
Why does the microwave oven hum when it’s working?
If the microwave began to hum heavily when working, but copes with its basic functions, the atypical sound can be caused by a simple cause. You can usually fix it yourself.
The glass plate in the microwave should rotate freely when heating food. If the microwave oven functions but has a loud buzzing noise, the problem may be the pan doesn’t move smoothly. The malfunction usually appears when there is abundant dirt in the inner chamber. pieces of food accumulate under the plate, preventing it from rotating.
The problem can be solved by this scheme:
- Disconnect the appliance from the power supply and open the door.
- Remove the glass dish together with the rails.
- The tray and the inner space of the chamber are thoroughly cleaned from food residues.
- Manually check how freely moves the motor shaft, which transmits the rotation of the glass plate.
- If the part is visually in order and dirt is eliminated, but the tray still does not rotate, remove the motor itself and replace it with a similar new one.
The motor, which is responsible for the rotation of the plate in the oven, is usually attached to the bottom of the device with several screws. To replace it, it is not necessary to carry out a complicated dismantling of the casing. it is enough to remove the special cover on the bottom to access the part.
Warning! Sometimes the microwave hums loudly when working due to a faulty high voltage capacitor. To replace this element, it is better to contact the service.
If the microwave tray doesn’t move and hums because the shaft is broken, you can replace it separately without installing a new motor