How to make a refrigerator on a foam balcony

Homemade refrigerator from foam on the balcony

The refrigerator can be made with your own hands from foam and related materials. We are talking about a small camping storage that can save some products in extreme conditions. The main advantage of the device is complete autonomy. The mini-cooler does not require inclusion in the electric network, so you can take it with you on a trip to nature or a campaign.

The principle of operation of a homemade refrigerator from foam

The mechanism of work of a homemade refrigerator is that it is equipped with thermal insulation material and retains the temperature of what is inside, at the same level.

The base material for a homemade storage is foam. It is a foamed mass with small cells. For domestic use, a variety of foam. polystyrene foam is traditionally taken. It is obtained artificially, secreting from the styrene while adding a foaming substance. The main properties of the foam, which are used in the construction of a home.made refrigerator, are:

The disadvantage of the material is its ability to collapse under the influence of various liquids. Therefore, in the manufacture of a foam box, it is customary to sheathe it with additionally auxiliary materials.

Tools and materials for work

The foam box can serve to store products for many years if the design is collected taking into account certain features.

For construction, you will need not only the main materials, but also auxiliary tools:

• plywood or wood to create a support frame;
• food foam;
• polyethylene film and reflector;
• nails for fastening;
• a hammer;
• hacksaw;
• PVA glue;
• construction fabric, construction tape.

The list of tools and devices can be increased. For example, for measuring and creating a pattern you will need a long ruler, marker, as well as roulette. Before proceeding to cut the foam, they often make paper patterns to clearly imagine the scheme of future assembly.

Information! A homemade foam box will easily replace the store bag-cooler.

A step.by.step manufacturing algorithm

The preparation stage includes work on cutting parts to create a box. To do this, rectangular parts are cut out of foam, which make up a single storage design. The upper part of such a refrigerator is made of two parts identical in size, but one of them should open out. The cover can also be made completely removable, but this option will reduce thermal insulation qualities inside the hollow space.

• A box with a lid is collected from plywood.
• The walls, bottom and upper part of the box are covered with foam parts, which must be tightly adjusted in size. Details plant glue on PVA. He grasps the foam and provides reliable adhesion.
• From the inside, the box is sequentially lined with plastic film, driving an excess film in the bosom of the box with a knife.
• On the outside, the box is glued with reflective material. It lays well on double construction tape and is glued with glue.

From plywood, the details are cut out so that they have allowances equal in thickness with polystyrene details. Instead of PVA glue, the internal parts can be connected using hermetic construction foam and put the structure into the plywood box. The advantage of this option will be an increase in thermal insulation properties. When using construction foam, you must wait for it to freeze. Then cut off excess and treat joints with sandpaper. This process seems long, but the compound by sealant is strong and stable.

Aluminum foil is used as a material for lining the internal space, instead of a plastic film. It increases thermal insulation, and also provides long.term storage of food products without loss of qualities. The use of foil makes the purchase of materials for the construction of more costly.

So that the refrigerator has the appearance of the carrying, to the upper part of the lid attach canvas loops in any suitable way. The best option is to fasten on small nails on the lower and upper part of the box. To arrange a loop, use a construction stapler, which reliably fixes the structure.

The outer side of the home.made structure can be additionally sheathed with plastic or lining. This will enhance thermal insulation properties, but at the same time increase the weight of the box.

Reference! The calculation of the hollow space inside the refrigerator is carried out taking into account what area the products occupy that it is planned to be stored inside.

DIY advantages and disadvantages

Personal experience of users suggests that in the box of independent manufacture products are stored for about 4 days without loss of qualities. The condition for using the refrigerator is the choice of a suitable place to place it. It is better to leave the box in the shade, near rivers or lakes, away from direct sunlight hit.

A homemade refrigerator has pros and cons of.

Homemade refrigerator is indispensable for regular trains to nature. It can easily replace the table on a picnic, suitable for storing not only food products, but also drinks.

How to make a refrigerator from a foam with your own hands

With the advent of summer heat, the problem of conservation on the road of products rises as much as ever. To preserve the most perishable, polyethylene bags, aluminum foil, scraps and pieces of insolon are used. On the tenth attempt to pray improvised thermal insulation, patience ends, and there is an idea to make a refrigerator from foam, light, compact and reliable.

Options for the manufacture of a portable refrigerator

In fact, any refrigerator does not matter, home or more powerful industrial, consists of a heat.insulating chamber in which the source of the cold is located. Therefore, to ensure reliable storage of products, two problems will need to be solved:

The easiest way is to make the refrigerator with your own hands from the foam. Fencing polystyrene foam has the best thermal insulation properties from all materials available at home. Any fabric, polyethylene, wooden, paper, bulk heat insulators at least two, or even three times inferior to the refrigerator made of foam.

Important! Almost any high.quality foam is suitable for manufacturing, but it is best a couple of sheets of a foamed polymer of a well.known brand, which is allowed to contact food products.

You can take the usual foam of the 20th or 25th brand, 30-40 mm thick, but after assembling the refrigerator, the inner surface will need to be pasted over with plastic film. For adults, this option is also suitable for children, especially if there is a predisposition to allergies, you will need to look for food polystyrene foam.

We build a foam refrigerator

The manufacturing procedure for a portable thermal box from foam is reduced to the following operations:

• We cut the material of the foam leaf to the size of the future refrigerator;
• We glue the box from the foam, lin the heat.reflecting material;
• We collect a wooden box of plywood and lay the thermal insulation case from the foam inside the box.

If the refrigeration box is supposed to be transported in the trunk of the car, it is necessary to make an external strengthening of the corner joints using an aluminum corner. As practice shows, in the process of transportation, a wooden box of the refrigerator at the outer corners is often damaged and the seams diverge.

Assembly of the refrigerator case

Cutting the sheet for the manufacture of heat.insulation from foam usually does not represent much difficulty. Even in the absence of experience and skills to mark and postpone four side walls, the bottom and cover of foam will not be difficult.

Advice! If you plan to build a refrigerator bag with your own hands from the foam, the bottom is best made from extrusion polystyrene foam, for example, technoplex or similar material.

The bottom from the EPPs will turn out to be much stronger and more reliable than the foam, especially if the outer body of the refrigerator is planned to be made of plastic, or it will be absent at all.

To glue the heat.insulating case from foam, you can use PVA and loose gauze fabric. Acrylic resins glue foam worse, the most durable polyurethane, bitumen or epoxy compounds are strictly not recommended, this is not the best option for products.

After gluing the foam box, the surface inside and outside the refrigerator will need to be lined with insolon or other thin.leaf foil with foamed polyethylene. As practice shows, various options for lining from reflective films, paper or food foil are much more expensive and give the extremely low strength of the reflective surface.

Only after that you can remove the measurement for the manufacture of a plywood box. If you already have a plywood box with a lid of the required size, then you can do much easier. remove the internal dimensions of the future refrigerator, reduce 6 mm by an insoloon sticker and cut out the heat.insulating box from the foam according to already known dimensions.

On the lid of the refrigerator, glue a layer of polystyrene so that a sheet of foam thermal insulation is completely immersed in the box, and not just covers the upper plane. We fasten the plywood cover on the piano furniture loop using screws.

Be sure to install a lock or latch, tightly pressing the upper cover and foam to the body.

Refrigerator and bag

Often a portable refrigerator has to not only be transported on a car, but also to carry on the shoulder or in the hands, if with such a load it will be necessary to ride in passengers of public transport, then a more preferred option would be a soft cold bag. To do this, select a spacious bag made of polyester or strong tarpaulin fabric.

For soft refrigerators, foam walls are easier to replace with EPPS sheets, and lay out the inner surface with insolon. In this case, the refrigerator box is glued with a durable construction tape to eliminate cold leaks through the joints of the foam, for a soft refrigerator, an outer cover with a foam cover on a velcro lid is sewn from an insolon. Even if you drop such a refrigerator, it will still remain intact and will serve for many years.

The proposed design of foam sheets can easily endure short.term temperature drops from minus 50 o to plus 80 ° C. Often, in a summer vacation, there is simply no way to freeze refrigerated agents and products in the refrigerator. In this case, the most savvy use the usual two.liter carbon dioxide fire extinguisher used to equip electrical equipment and cars. Two powerful jets of carbon dioxide from the bell of the fire extinguisher are able to cool the inner space of the refrigerator to minus 30 o. For carbon dioxide products, it is completely harmless, and one charge is enough for almost 18 hours of storage.

Which cellar to choose for a balcony

The type of cellar for storing vegetables depends on the floor on which it will be built. On balconies above the first floor it is better to equip the thermal container for sunset and products. It can be a mobile or stationary device.

Residents of the first floors of high.rise buildings were more fortunate: they can build a full.fledged underground cellar under the balcony. a storage for the harvested crop. Previously, you should take the appropriate permission, since the cellar under the balcony requires redevelopment, dismantling the concrete slab.

Varieties of finished containers: the main characteristics

The container for storing vegetables have the following characteristics:

• A flexible container for storing vegetables on the balcony (looks like a large backpack). Most of the finished products are made of multi.layer waterproof fabric. Built.in synthetic gasket plays the role of the heat.insulating layer, thereby increasing the efficiency of the device.
• A significant element of the container is small heating elements that penetrate its wall through which the temperature inside the cellar drops below the given level.
• Ready containers are equipped with a thermostat, which is located outside. Thanks to the sensor, it becomes possible to set the desired temperature regime, optimal for storage. If the temperature drop is observed below the lower limit, the heating is automatically turned on when it is exceeded. it turns off.
• These devices have established themselves as energy.saving. The buyer himself determines the daily electricity consumption, choosing the volume of the container and setting the temperature. In general, consumption does not exceed 1.5 kW per day.
• There will be no difficulties in the process of choosing products, since they are presented in different volumes and colors.

Paying attention to the relevance of the problem, as well as the lack of warehouse areas, manufacturers have released a number of special structures that may become a worthy alternative. Are a heat.insulated container with ventilation and heating. There are several types of finished cellars.

What is

The usual one.looking bag made of two layers of nylon fabric is laid out inside with a heat insulator. foamed polyurethane or polyethylene. Pre.frozen products are used as cold accumulators. A simple concept gives the desired effect. Such a portable refrigerator will be useful and not burdensome:

• when working at remote facilities, where there are no conditions for the preparation of hot meals;
• on long trips by car or train;
• on the beach, picnics, summer cottages, in tourist engines.

The main advantage of the Terms bag in comparison with the container is the ability to compactly fold the container after it is empty. Some models of such bags can be additionally equipped with accumulators of cold or heat. with special plastic containers filled with gel, saline or dry ice. Such devices can maintain the required temperature up to several days.

We build a foam refrigerator

You can make the easiest version of the refrigerator from the foam with your own hands in the form of plywood boxing, inside which thermal insulation from polystyrene foam is laid. In some cases, for example, for portable shoulder bags. refrigerators, heavy plywood lining is replaced with light PVC plastic. How to make an external cladding, the essence is not so important, the main thing is to collect a high.quality and durable box from foam.

The manufacturing procedure for a portable thermal box from foam is reduced to the following operations:

If the refrigeration box is supposed to be transported in the trunk of the car, it is necessary to make an external strengthening of the corner joints using an aluminum corner. As practice shows, in the process of transportation, a wooden box of the refrigerator at the outer corners is often damaged and the seams diverge.

Refrigerator and bag

Often a portable refrigerator has to not only be transported on a car, but also to carry on the shoulder or in the hands, if with such a load it will be necessary to ride in passengers of public transport, then a more preferred option would be a soft cold bag. To do this, select a spacious bag made of polyester or strong tarpaulin fabric.

For soft refrigerators, foam walls are easier to replace with EPPS sheets, and lay out the inner surface with insolon. In this case, the refrigerator box is glued with a durable construction tape to eliminate cold leaks through the joints of the foam, for a soft refrigerator, an outer cover with a foam cover on a velcro lid is sewn from an insolon. Even if you drop such a refrigerator, it will still remain intact and will serve for many years.

To work, you need several refrigerated packages. It is best to use ready.made industrial elements with a gel.shaped filler, but you can make it yourself. The package is glued with polyurethane glue from several layers of polyethylene film and filled with a gel of boiled salt water and thickener. The package is filled by 60%, the air is removed, after which the filling hole is sealed with a hot iron. For a 10 liter thermal gunner, four half-liter packages will be required, frozen in the freezer up to minus 18-20 o.

We make cold batteries

Cooling elements can be bought in a store or do it yourself. As a result, you will get a cold bag. It’s pretty simple to do it with your own hands. To do this, you can use the usual plastic bottles of the corresponding size and shape. They should easily enter the bag and take as little space as possible. For this purpose, you can use heating pads or sealed plastic bags for ice. For filler, dilute salt in a liter of water. The solution must be concentrated.

The resulting volume is brought to 3 liters. By adding wallpaper glue or gelatin, we get a gel consistency. We fill the prepared forms with the solution and lay in the freezer chamber. Such a filler melts longer than ordinary ice. Improvalum batteries should be placed at the bottom and top under the lid. Depending on the number of products, their temperature and storage time, the elements of the cold can be laid out between the provisions.

Refrigerator and bag

Often a portable refrigerator has to not only be transported on a car, but also to carry on the shoulder or in the hands, if with such a load it will be necessary to ride in passengers of public transport, then a more preferred option would be a soft cold bag. To do this, select a spacious bag made of polyester or strong tarpaulin fabric.

For soft refrigerators, foam walls are easier to replace with EPPS sheets, and lay out the inner surface with insolon. In this case, the refrigerator box is glued with a durable construction tape to eliminate cold leaks through the joints of the foam, for a soft refrigerator, an outer cover with a foam cover on a velcro lid is sewn from an insolon. Even if you drop such a refrigerator, it will still remain intact and will serve for many years.

To work, you need several refrigerated packages. It is best to use ready.made industrial elements with a gel.shaped filler, but you can make it yourself. The package is glued with polyurethane glue from several layers of polyethylene film and filled with a gel of boiled salt water and thickener. The package is filled by 60%, the air is removed, after which the filling hole is sealed with a hot iron. For a 10 liter thermal gunner, four half-liter packages will be required, frozen in the freezer up to minus 18-20 o.

The proposed design of foam sheets can easily endure short.term temperature drops from minus 50 o to plus 80 ° C. Often, in a summer vacation, there is simply no way to freeze refrigerated agents and products in the refrigerator. In this case, the most savvy use the usual two.liter carbon dioxide fire extinguisher used to equip electrical equipment and cars. Two powerful jets of carbon dioxide from the bell of the fire extinguisher are able to cool the inner space of the refrigerator to minus 30 o. For carbon dioxide products, it is completely harmless, and one charge is enough for almost 18 hours of storage.

If the refrigerator does not turn on, then the first thing you should check the presence of current in the outlet of course, not all serviceability is so serious that it is just right.

In winter, a metal garage is not the best option for parking a car. The air temperature in the room is almost the same as.

Smoking. thermal processing of meat products using smoke formed in a closed space from smoldering sawdust. As a result, they are partially.

Base. foam box

So, the foundation of a mini-coldger is a foam box. This material is characterized by low thermal conductivity, which makes it the most popular insulation in construction now. Thanks to his properties, he can maintain not only heat, but also cold. You can replace it with polystyrene, but believe me, the effect will not be so reliable. So look in your bins or contact friends who recently had a construction or repair, there will probably be several extra pieces.

The thickness of the foam is different, for the refrigerator there is enough 3 cm. But the more thin. the better, the main thing is that the box gets into your trunk

Cut the foam into 7 rectangles and glue the box from them. You can add several screws for reliability

For the refrigerator door in one of the rectangles, you need to cut the frame. Two parts will turn out. a smaller rectangle and the frame itself

Fix the frame in one of the sides of the box with glue and screws

Preliminary work is completed, the base for the refrigerator is ready, but this is not enough. The refrigerator is not yet able to cool the products.

Cooling device: Why do you need a diaper in the refrigerator

When the box is ready, it remains to solve one important issue: what will reduce and maintain the temperature? The author of the master class came up with a very original decision, but about everything in order.

The inner part of the box must be glued with foil isolon for better thermal insulation. With such a “pie”, the outer temperature will no longer have any meaning

Now you will need packs made of dense polyethylene. If you find such it is difficult, use the most dense stationery files

And now, the most interesting: why do you need children’s diapers?

Fill the diapers with water so that it is completely absorbed

Put the diapers and put the gel granules filled with water in prepared plastic bags

Remove excess air from packages and steam the free edge tightly

And now. the answer to the question of interest to everyone.

Put packages with granules from diapers in the freezer and freeze. Nourished by moisture, then they will melt for a very long time without forming water

How to make a thermalmaker with your own hands at home?

First of all, decide on the size of the structure. To do this, measure the free space on the balcony and think about how many vegetables will be required for the winter. If this is a thermal for potatoes, then the box can be small, if you need to organize the storage of beets, carrots, then you can add several compartments for other products to the thermoian for potatoes for potatoes. Then you should think over the shape of the thermalman. Perhaps you will want to build only a pallet of heating, or maybe you will get a full-fledged thermal for products with a lid that can perform the function of a banquet or mini-divantic.

Next, select materials for the future thermalist. At this stage, you can save if, for example, you have an old unnecessary furniture (bedside table, bed), which can be used as the basis of the thermalist. If there are no improvised materials, go to the store behind the sheets of a wood-fiber slab, a wood-cutting stove, as well as bars, corners and screws. Do not forget about the insulation, it can be polystyrene, mineral wool, foam rubber. You can also save on the insulation using the old blanket or blanket.

The next step is the choice of a heating device that needs to be mounted in a thermoian for vegetables on the balcony. It is needed even if the balcony is insulated. Indeed, for storing vegetables, a temperature of 1 ° C to 5 ° C is required, you see, it is difficult to maintain such a temperature on the balcony frosty in winter.

The choice of heating devices is wide: incandescent lamp, electric heap, warm floor system. Each of the listed methods of heating has advantages and disadvantages. By the number of advantages, the ideal option is a warm floor system.

Warm floors in a thermal for storing vegetables on the balcony in winter: Pros

• Depending on the ambient temperature, you can set the desired temperature in the thermostatic using a thermostat, which will maintain a given temperature mode automatically.
• Infrared radiation will not dry air in a thermal agent, so you can not worry for humidity.
• In addition, IR radiation favorably affects vegetables, since in its origin it is similar to sunny.
• An electric thermal thermal carrier based on a warm floor does not consume much electricity, so it is economically beneficial.
• The service life of the warm floor is 20 years.

Refrigerator and bag

Often a portable refrigerator has to not only be transported on a car, but also to carry on the shoulder or in the hands, if with such a load it will be necessary to ride in passengers of public transport, then a more preferred option would be a soft cold bag. To do this, select a spacious bag made of polyester or strong tarpaulin fabric.

For soft refrigerators, foam walls are easier to replace with EPPS sheets, and lay out the inner surface with insolon. In this case, the refrigerator box is glued with a durable construction tape to eliminate cold leaks through the joints of the foam, for a soft refrigerator, an outer cover with a foam cover on a velcro lid is sewn from an insolon. Even if you drop such a refrigerator, it will still remain intact and will serve for many years.

Kholodnik container from technical buckets

Hello. Today I want to tell how I made an isothermal container (thermos), in which it is convenient to store frozen products when traveling “on nature”. As I already mentioned in my previous publications, we often go to the forest with tents with a large company. Sometimes such trips last a week, or even longer. At the same time, the problem arises-since we go, mainly, in the summer, meat products, barbecue, etc. We have to eat in the first day or two. Otherwise, they will deteriorate. Car refrigerators, of course, solve the problem, but they have a number of significant drawbacks. Namely: small capacity and high energy consumption. If you leave it on, and drown out the engine. after a few hours you will no longer start a car due to a discharged battery. Factory isothermal containers of large capacities are quite expensive, so it’s easier to make a big thermos with your own hands using bunch materials.

So, we will need: 1. Technical container (bucket) with a capacity of 30 liters. 2. A smaller bucket, with a capacity of 20 liters. 3. Installation foam. 4 foam 50 mm. 5. Foam 30 mm. 6. Strech-film. 7. Silicone sealant. eight. Installation glue (“liquid nails”) 9. Foil foamed polyurethane. (Or other similar foil material). ten. Scotch.

For manufacture, I used such a technical bucket, with a capacity of 30 liters from for food label glue.

This operation cannot be done at a time!! Under the top layer, the foam will not freeze without air access, but simply drains down! Therefore, you will have to do this for several days, applying foam in thin layers. And one more important point: at the first passes, use the extension nozzle on the gun (or a long hose, if you use not professional, but household mounting foam.) The nozzle foam must be at the very bottom, otherwise the foam, expanding rapidly, will hang between the walls, and you will get air cavities. This cannot be allowed, because the effectiveness of your isothermal container will significantly decrease.

After all the layers are applied and the foam froze, we cut off the excess with a clerical knife and apply a layer of silicone sealant, completely hiding the mounting foam and yielding its surface:

This must be done for two reasons: hardened mounting foam must be protected from moisture and create a flat “rubber” elastic surface for a tight fit of the cover.

We also need to “insulate” the lid. To do this, I cut out a circle of foam 30 millimeters thick, with a diameter equal to the diameter of a large bucket in its upper part. Since the foam is easily destroyed, to increase the strength of the lid, as well as protect the foam from moisture, I tightly pulling it tightly, wrapped the resulting circle of a stretch-stick into several layers. And yet, I glued a plastic circle on top with a “extinguished” foam (cut out of the lid of an excess large bucket) and a lid of a small bucket with a cut edge from below. Here I have such an insert:

To protect against direct sunlight, I glued a bucket of foil with foamed polyurethane, 5 mm thick. Used at the same time mounting glue (“liquid nails”).

The outer upper cover was glued with the same material. But, as it turned out when closing, opening, due to curvature of thin plastic lid, polyurethane is very quickly peeled off. After which I decided to just make a “cap”, which will dress in a closed bucket from above. Yes, so until I did!))))))

Community Make the Blog itself the simplest car thermobox.

Hi all. It took us somehow for a trip to the south car hub. I watched online stores, and Kygev from the and efficiency of refrigerators decided to make his own. The first option was made of a cardboard box of dining on the outside and inside a 20mm polystyrene, and on top of the foam even the thinnest foil thermal insulation. Operation showed that this refrigerator is enough for more than 24 hours (after a day the oil inside is still solid), but this option came out in the form of foil ruptures and cultivation of foam. Therefore, the refrigerator was made new from another thermal insulator: the foam.light base is 50mm. The internal size was selected based on the size of the cold battery, it is flat, but large in area. In general, for manufacturing, I required 2 sheets of foam and a tube of glue for a foam.

He cut out the walls and lid in this way. Then I glued everything. By the way, for gluing, you can use the mounting foam, it even better, more efficiently fills the seams, only you need to fasten the entire box so that it does not pester with foam.

The total volume turned out 31 liters, the internal dimensions are 273236cm.

For a tight fit of the lid, it must be glued with an additional insulation or fabric with a pile.

Refrigerator (or rather, thermal container) with your own hands ⁠ ⁠

For those who are going on a long journey. An example of, as in virtually trash, to make the right thing.

I made my first refrigerator a few years ago when I was going to relatives on (c) Ukraine. The path was not close, but the heat stood about 35 degrees. I did it quickly, from what came from. The result was pleasantly surprised. For almost a day in two one and a half liter bottles that I used as a cold battery, did not melt the ice to the end. I did not have to buy products on the road.

I still use the same box. But soon a new long trip is planned, there will be more people, and I am doing another box.

Of course, you can buy a finished product. But a good box will be expensive. And why bad.

The technology is simple. Foam and foamed polyethylene with “shine”. You can use other thermal insulation materials, in general, what you find, then your. The first product was “frameless”. Less size, and the foam was in the form of an almost finished box. This time there was no absolutely time to look for a good foam, and buy sheets in a work store. expensive. Found packaging from office equipment.

As a basis. Thifted a fruit box.

I am doing inner upholstery. Polyethylene is fixed with wire.

Now I sheathe on top with foam. Then I was lucky. The boss found me at the workplace for this occupation and dragged flat sheets (probably from the packaging of the refrigerator). This very accelerated the process. True, the sheets are partially nibbled by mice, but it’s not scary. I fill the holes, glue with glue, which foam panels are sculpted to the ceiling.

After filling the holes, I wrap it with polyethylene on top. Temporarily wrap with painting tape until the glue dries.

The work took time for three hours, with interruptions in the main work, lunch, etc.D.

For money: thermal insulation 10 mm thick about 200 per 2.4 kV. m (2 linear meters). glue 160 per half liter. Maslar tape. Remains from the construction site. The rest is free. The volume of the box is about 26 liters. Size approximately 40x40x50 cm. Wall thickness 5-6 cm.

You can even make it even easier. Take two cardboard boxes, put in each other with a layer of basalt wool. It will turn out even faster. All in your hands.

A friend told. He has a summer house a few hundred km from the city, he sent his wife and daughter to live there for the summer, and only he came there for the weekend by train. So he made a refrigerator for himself the same box, and says when you take out a bottle of cold beer in the heat in the hearts in a stuffy car, it is immediately covered with vapor, open, take a sip and feel like everyone around you hate you all around you

It seems not very far from the collective farm, but not neatly. If there is a need, it is more advisable to buy a ready.made option. Plus a half with ice, as it were. I do not even know. In Auchanes, ribbons, 150 rubles are sold special plastic flat (as they are called pancake?) thermal mester, with blue liquid, freeze and the effect longer than from water.

And I got several of these (or similar) boxes of factory. They are also transporting drugs that quickly deteriorate. So in the largest there are 2 boxes of beer) (20 bottles each). sooooo convenient to go to nature. you lay a refrigeen and enough cold for 3 days. In the heat on the street 35. Camping and alcohol products began to take much more pleasant and easier.

You can buy a normal container and not fuck with these dicks.

And the summer is more easily easier and simply possible? ((EEEHHH

and age ⁠

When I divorced my husband, I was 29 years old and my mother.in.law, when I found out that her son had gone from me to another, sighed condescendingly and said.”Well, yes, he ruined your life, and you already have such an age. “. At the age of 30, my mother began to shame me for clothes, namely a light sports style, rude shoes, short skirts. “At my age” we must wear everything strict and be sure to be below the knee, and you need to forget about bright colors. At work, all deeply married ladies periodically sigh to my 35 and try to persuade at least to do IVF up to 40 years.

In short after 35 years. You are a missing person and only the bottom is ahead, especially if you are a woman.