How to hide the pipe from the hood in the closet

What to do if the cabinet closes ventilation

In order for the technique to operate on full power, it is necessary to periodically clean it. When operating on filter elements, hard.made fat accumulates. In addition, a contaminated filter is able to provoke a fire or breakdown of the motor.

There is a latest generation technique on the market today, with sensors signaling the need to clean. If you do not have the most advanced model, wash the device monthly. Therefore, all users need to know how to disassemble the hood to clean it.

• Learn the design features of the model, find on the diagram its collapsible elements.
• Before disassemble and wash the hood, turn it off out of the outlet.
• The upper part of the case is removed, which is mounted on bolts or latches.
• In some cases, it is enough to extract an air mesh-screen that protects the internal cleansing device. Most often it is installed on special latches.
• The rest of the collapsible parts are also removed. They should be soaked in a warm soap solution to dissolve the fat.
• A contaminated filter is removed.

 a solution based on laundry soap and soda;

As you can see, it is not so difficult to clean and disassemble the hood. When each detail is washed and the unit is cleaned from the outside, you can collect it back.

What will happen if you close the ventilation in the kitchen with a cabinet

We will figure out whether it is possible to close the ventilation in the kitchen with a cabinet. This problem is relevant during the arrangement of the kitchen set and when planning the interior. There are certain rules when installing the cabinet. The design should not tightly close the ventilation.

When installing a cabinet under the hood, it is necessary to compare the dimensions of the kitchen set. If the block fits, and its lower part is made of material with a thickness of 10 mm, you can proceed to the execution of holes.

Is it possible to close the hood in the kitchen with cabinets depends on the design parameters. When arranging, moisture protection is ensured. And for sealing a special sealant is used. It is important to think over the technology of the supply cable.

Installation of the cabinet occurs in several stages:

• Dismantling work in the headset.
• Rearing the rear walls.
• Surface marking in the lower part using a ruler and pencil.
• Then the angular points are drilled with a drill.
• Formed faces are treated with sealant.

The installation of the cabinet is performed using ordinary fasteners. For this, angular spacers and metal plates are used.

Five options for masking an exhaust pipe

When installing a running hood, it is important to provide options for how to hide the duct so that the pipe does not spoil the impression of the style of the kitchen. The sleeve is decorated using various materials and technologies. A number of requirements are presented to masking structures:

• aesthetics and presentable appearance;
• resistance to elevated temperature regime;
• moisture resistance;
• resistance to chemical effects and ultraviolet light;
• Easy to care and maintenance.

Working on the task of how to hide the corrugation from the hood in the kitchen, it is worth considering that the masking structures are also designed to help reduce noise from the electric motor of exhaust equipment.

Plastic box

The easiest way to hide the duct in the kitchen using a plastic box, if the distance between the hood and the entrance to the ventilation shaft does not exceed 3 m. A huge assortment of current products is presented on the profile market, vary in an affordable segment. The design is easily mounted: plastic boxes are produced in the finished form, and it is not required to waste time assembly.

Gypsum cardboard box

The solution will successfully fit into any interior and attracts the variability of execution. A drywall box is placed vertically with a mount to the wall or a horizontal structure is built in the space between the ceiling and the upper perimeter of the kitchen set. In order not to violate a single style solution of the interior, the surface of the box is finished with the appropriate materials.

We build in a kitchen set

To hide the corrugation from the hood inside the kitchen, in the project of the furniture composition, hanging cabinets with special communications for communications are provided. The sleeve takes a little space in the module, the rest of the space is used for its intended purpose as part of the storage system of kitchen utensils.

Decoration

The budget method of masking the exhaust pipe is painting. To do this, choose colors in the style palette of the kitchen. The air duct’s decor with the help of coloring trains is a priority among those who are not interested in significant costs for the arrangement of kitchen equipment.

Stretch ceiling

Systems of stretch and hinged ceilings are also in demand as structures that hide an exhaust pipe in the kitchen. Tile and panel solutions are relatively inexpensive, most often they are carried out without involving specialists. If necessary, maintenance and repair of communications inside the suspension system, the corresponding surface sector is dismantled, after planned measures, the panels are inserted back.

Professional equipment is required to install a stretch ceiling, this is reflected in the total cost of work. In addition, to access the duct, which is hidden under the ceiling system, you will have to disassemble the tension coating, which is fraught with additional expenses.

Pipe masking with a plasterboard box on your own

For the construction of a decorative gypsum cardboard, special knowledge is not required. Work is performed using instruments from home arsenal. To properly organize the process of masking the pipe of the hood with drywall, the necessary calculations are made, on the basis of which the necessary materials are acquired.

Tools and materials

To hide the duct under drywall, you will need the following set:

• power tools. drill, peorator, lobe, electric screwdriver;
• construction level, roulette, marker;
• scissors for metal;
• metizes. screws, dowels, fasteners, clamps;
• metal profiles for the frame. guides and intermediate parts;
• drywall in consumption quantities.

It is also necessary to prepare materials for finishing the drywall box, which will hide the duct in the kitchen.

The course of work on pipe disguise

At the preparatory stage, measurements are made and the project of the future design is carried out. The main works provide for the following sequence:

• Marking. Using the leveling, horizontal and vertical lines are marked on the surface of the walls and ceiling;
• Installation of profiles. The guides are installed on the given lines using dowels. Further, vertical parts are attached to the profiles with self.tapping screws;
• Installation of corrugation. The sleeve is installed inside the frame, connected to the hood and the ventilation shaft.

Next, the installation of drywall is performed. The frame is sheathed with blanks using self.tapping screws, joints are sealed with a construction solution or a special sealant.

Barrow finish

The plasterboard box is decorated in accordance with the overall style of the kitchen interior. The surface can be thrown and stirred, painted in a tune with a set of gamut, pasteen with wallpaper or use other finishing options.

The consequences of closed ventilation

Negative consequences arise not only with a closed system, but also as a result of its malfunction. Many reasons lead to breakdowns of the ventilation system. In winter, problems arise with an increased level of humidity. Steam forms on the windows, and over time, the fungus.

One of the causes of the malfunction is the reverse traction. As a result, the air remains inside the system. There are no holes in the rooms through which fresh air penetrates. In such a situation, you cannot think how to close ventilation.

With violations of air circulation, adverse consequences occur, which is difficult to eliminate.

The lack of ventilation is the reason:

As a result, the service life of finishing materials, household appliances and furniture sets is reduced. Households have health problems. Diseases of the respiratory system, infections and allergic reactions appear.

Therefore, you need to think, there is nothing to close the ventilation, but how to check the system and clean it correctly.

Air traffic problems often arise in the buildings of the old building. The cause of low.quality ventilation may be the installation of sealed double.glazed windows. Narrow channels made taking into account wooden structures will not cope with air flows. In such a situation, in order to avoid excessive moisture accumulation, you need to regularly ventilate the room.

Low throughput of the duct can cause blockage due to accumulated debris. Channel overlap is facilitated by incorrect redevelopment.

It is important to regularly check the performance of the ventilation system and perform timely cleaning of the structure. If the purification of ventilation holes did not bring results, you need to call specialists to eliminate malfunctions.

Five ways: how to hide a ventilation pipe in the kitchen

Every housewife strives to make the kitchen comfortable and beautiful, because she and her family spend a lot of time here. Functional furniture, beautiful dishes, stylish window design. important components of the aesthetic attractiveness of the room. But often a pipe does not fit into the general style that provides ventilation of the hood over the stove. In what ways can it be hidden so that the space remains stylish and beautiful?

The duct. an integral part of the running hood. is a wide in diameter a flexible corrugated pipe with a silver metal coating. Only in some interior styles (loft, high-tech) it is acceptable to maintain the appearance of the ventilation pipe without changes, since its appearance will not spoil, but, on the contrary, emphasize the features of the design of the kitchen. All other options for the decor of the room suggest that the duct is not too attractive in appearance will be hidden from the eyes. There are several options to hide the pipe.

Frequent errors

Among the frequent errors in the installation of corrugation and a plastic duct, an incorrect selection of structural elements is noted. It is important that the cross section of the sleeve corresponds to the size of the output pipe of the cleaning device. It is also noted that the corrugation should be installed in the most stretched way, while it is necessary to exclude sharp bends of the channel.

Presenting a modern and functional apartment without hood in the kitchen is now almost impossible. This device will easily get rid of food smells, fatty on the ceiling and other unpleasant consequences of cooking in the kitchen. However, in order for the hood to work correctly, it must be brought to the ventilation duct of the house. And you can do this with the help of a corrugation from the hood. But she looks, of course, not as beautiful as we would like, and can ruin the entire interior. But there is a way out! We will show you 6 simple ways to hide the corrugation from the hood in the kitchen.

Features of corrugation for hoods in the kitchen

Corrugated. a corrugated, as a rule, a soft pipe that is used in the equipment of air ducts in the house or at production. It allows you to combine various equipment with ventilation ducts, due to which it is possible to ensure the correct circulation of air, removing unpleasant odors from the room directly into the ventilation shaft or on the street.

Hoofra for hoods connected to ventilation

Corrugation is most often flexible, so it is very convenient to use in various conditions. With its help, it is easy to make a duct where the spaces are curvoline. In addition, all the work can be done with your own hands without resorting to the help of masters. The corrugation has other advantages:

• durability of use;
• the ability to purchase in any store;
• excellent properties in the field of aerodynamics;
• low price;
• accessibility for everyone;
• Light weight.

На заметку! Ранее, чтобы организовать вытяжку в помещении, приходилось заказывать специальные жесткие конструкции под конкретные размеры, что усложняет работы и удорожает их. Сейчас в этом нет необходимости благодаря применению гофр.

Corporal, of course, is not perfect. It is difficult enough to clean, it is soft and easily violates its shape or is damaged with careless installation. But the number of its advantages, no doubt, exceeds the number of disadvantages.

Hofra for hoods

The most common corrugations are aluminum and plastic. The first can be used both inside the house and outside. She is not afraid of cold weather and heat, durable in use, light, has a moderate density of the frame. Cons. a large noise during the operation of the hood and vibration. Plastic corrugation is inexpensive and simple in installation, but it is a fuel, quite fragile and during the operation of the hood can make an unpleasant odor.

The most important drawback of any corrugation is an ugly appearance. The pipe from the hood to ventilation, lying in sight, will easily ruin even the most beautiful appearance of the kitchen. Fortunately, there are a lot of ways to rectify the situation. For you. 6 options, how can you hide the corrugation from the hood in the kitchen.

Laying over the cabinets headset

This is the easiest and most obvious way. But it is only suitable if your kitchen set is equipped with boxes and cabinets that are fixed on the wall above the working area. Then the corrugation can simply be laid along the wall on the lockers. It will not be 100% hidden from prying eyes, but there will be no longer in sight.

Making a special box

This option is not the simplest, but it is suitable for any kitchen and in any case, even if the headset has already been installed. From such a material as drywall you can easily make a box with absolutely any form that you need. For example, from drywall, you can simulate the protrusion of the wall, and lay the corrugation inside. And to finish the box itself with the same materials as the walls in the kitchen, and it will become a direct continuation and will be completely invisible. The disadvantage is that if it is necessary to repair the corrugation, you will have to break the box itself.

Pipe decoration

The easiest method. So that the corrugation does not catch my eye, it is simply painted with moisture.resistant paint in one tone with the walls. And you can also decorate with some decorative elements. Or to make the pipe itself part of the interior is a good option for loft, high-tech and like. Minus one. not for all interiors this solution is suitable. In most cases, corrugation looks absurd in sight. But you will not spend a lot of money.

The use of false panels

An interesting option. In this case, the pipe is, as it were, hidden in the bowels of the kitchen set. Just order a false panel in the color of the facades, install it on the upper part of the headset and pave the corrugation behind it. This is one of the most relevant ways to design ventilation pipes in small kitchens, because the kitchen set supplemented with such a panel visually increases the height of the ceiling. The main thing is not to forget to provide the ability to remove the panel if necessary, so as not to break it.

Building the hood into a headset

The method is similar to false panels: the corrugation is behind the facades of the headset. Not for the false panel, but right behind the doors of the cabinets. The corrugation in this case is also not visible, the additional elements of the headset will not have to be ordered. Only now the place inside the lockers will be partially occupied by ventilation communications. However, if you have a big set, then this is not at all scary.

Pipe inside the ceiling

If you have a stretch or suspended ceiling in your kitchen, then use the space inside it to hide the corrugation. True, you need to think about it in advance, even before the installation of the ceiling itself. In this case, ventilation will not be visible at all. Yes, and there will not be necessary to hide it for any false panels, as well as take a place in the closet if you decide to lay the corrugation inside them. The minus of this solution is obvious: the ceiling will become lower. But there are undoubtedly pluses much more.

How to hide the pipe from hood

The hood cleans the air in the kitchen of fumes, smoke and smells during cooking. Therefore, no doubt, this device is an important element of modern cuisine.

When purchasing a headset, you should worry in advance about how to hide the pipe from the hood in the kitchen. Corpushes should not spoil the appearance of the kitchen set and interior.

If you do not think about how to disguise the corrugation in advance, then certain difficulties may occur during the installation process.

Varieties of ventilation systems

To date, only two types of kitchen hoods can be purchased in the market:

Circulation hoods fit into any interior, because they are made in a wide variety. They differ in color, shape and size.

However, such ventilation systems require complicated care, due to the regular need to replace the filters. In running hoods, everything is much easier. Here the air is excreted in the ventilation shaft through the air duct.

In circulation exhaust systems, the air is cleaned using filters.

The installation of running hoods is complicated by the fact that they need to be connected through an air duct with a ventilation shaft. The trouble is that the hood and the ventilation shaft are usually located on different walls. How to install an hood in the kitchen so as not to spoil the interior of this room?

Gypsum cartoon box or stretch ceiling

One of the options for how to close the duct is to sew it into a drywall. To do this, make a crate in size of the pipe. It can be made from a metal box.

The crate is sheathed with drywall. The finished box must be fixed to the ceiling/wall. It can be any form.

This option is the most successful if you plan to make a suspended plasterboard ceiling in the kitchen, called two.level.

Another option is to hide the corrugation from the hood in the stretch ceiling. In this case, the pipe is located above the stretch ceiling and it is completely invisible. The best option, at first glance.

But what if there are problems in the operation of the duct? Keep in mind that it will be impossible to get to it without dismantling the ceiling. And this, let me notice, unnecessary financial and time costs. And besides, you will not be able to restore the ceiling yourself.

And this, in turn, means that you will have to repeatedly invite specialists in installing stretch ceilings.

Installation of plastic pipes

Another option is to use a plastic pipe instead of a corrugation. They can have a rectangular or rounded shape. The latter are more effective than the first. They have less air resistance. Nevertheless, rectangular pipes fit much better into the modern interior. Below are some advantages of plastic pipes:

• They do not clog from dirt or fat, unlike their corrugated analogues;
• They can be painted in any necessary color and even poured wallpaper in the tone of the walls;
• They have increased sound insulation.

In order for the ventilation system in the kitchen to work properly to observe the norms of distance from the hood to the stove. For example, for an electric stove is 70 cm, and for gas. 80 cm. This precaution is due to the fact that a layer of fat often accumulates on the surface of the hood, which quickly ignites under the influence of elevated temperatures.

So, if you decide to hide unsightly pipes from the hood, then use one of the methods proposed in the article. If you have questions or you want to share personal experience with our readers, then please write Комментарии и мнения владельцев on the article.

Hoofra for hoods. how to disguise it in the interior?

For many years now, no self.respecting mistress has been complete in the kitchen without hood.

This simple device not only cleanses the air of evaporation and burning products during cooking, but also protects furniture, ceiling and other surfaces from small particles of fat.

But, as often happens, you have to pay for additional convenience. In this case, not the most attractive corrugation for the hood, which spoils the entire kitchen design.

The modern market has a huge variety of hoods, they differ not only in the widest spectrum of design: from solid classics to futuristic high.tech, but also with a power that it makes sense to choose the right thing depending on the area or even the volume of the kitchen. If a low-power device fully cope with its task in the kitchen in Khrushchev, then buying it for a modern studio apartment is a waste of money. Unwanted smells and soot will be provided to you.

In addition, kitchen “rescuers” are fundamentally different in the principle of work. There are two of them: there are prototype extracts, but there are circulation. We’ll talk about the running ones a little later, first we touch on circulation. It’s pretty simple with them.

This is an autonomous device, which, in fact, “drives” the air in the room in a circle, cleansing it through its internal filter. It is enough to pick up an extract suitable in style, connect to the network and use.

However, experts also indicate significant disadvantages of this type:

• High care requirements. the hood itself and the filter must often be cleaned;
• As the filter is contaminated with its functions, the hood is getting worse;
• not suitable for large rooms.

The main advantage is one. there is no notorious pipe from corrugated aluminum foil, which overshadows the joy of a thoroughly verified kitchen design. The running hood just needs such a design, because, absorbing the air, it takes it into ventilation, making cleaning more efficient.

There are several varieties of the pipe itself, connecting the hood and the hole in the wall, behind which the ventilation shaft begins with the exit to the roof.

Plastic, rectangular with different crossings of the pipe is more suitable for those situations when the duct consists of straight lines, and the hood itself involves the connection of a rectangular pipe precisely.

Otherwise, the design will be very complicated by the addition of all kinds of fittings. compounds. Also, a plastic pipe, although less noisy, but more demanding on temperature regimes.

Very hot air can deform it.

An aluminum corrugated pipe with a diameter of 100, 120, 150 mm is the most affordable, common and universal version. Most hoods have an outlet of one of the three of the above.mentioned corrugation diameters, so pick up the desired size of the sleeve, most often, is not difficult.

The length of the pipe can vary, usually it can stretch to three meters in length in a straight line. If the sleeve is needed longer, you can purchase several sets and connect them using ordinary clamps of the same diameter or special fittings.

This option will also help out if the duct should purchase a complex shape with many bends.

The corrugated structure allows you to give bends without compounds, but there is a risk of narrowing the diameter inside the duct, and this is extremely undesirable. Such a pipe is attached with clamps on one side to the hood, and on the other. to a special site. When choosing a site, it is important to take into account two parameters:

• The diameter of the hole on which the corrugation has to put on should coincide with the pipe;
• The dimensions of the site itself should overlap the ventilation hole in the wall, the site is attached using an electric drill and dowel-grooves.

In addition to the above advantages, the aluminum pipe withstands a wide range of temperatures, it is durable and fireproof, is not afraid of moisture, not subject to corrosion.

The lack of one and the essential. an unattractive appearance.

The corrugation for hoods of stainless steel has the same advantages and disadvantages as aluminum, but even more durable, is able to cope with very high temperatures, has a higher price.

At any stage, if the repair in the kitchen is in full swing, or it has long been inhabited by households, you can hide the unsympathetic sleeve from the hood in the kitchen. The main thing is to know how to hide. There are several options, they vary both in material and labor costs. But the final result directly depends on the imposed efforts.

When planning a kitchen set, if you already know where exactly the hood will be located, and where the sleeve will reach from it, choose models with a decorative visor, which is installed on top of all mounted cabinets. Often it has a cornice protruding upward. If you mount the duct along the wall and put it on the visor, hiding behind the cornice, it will virtually no. This option is suitable if:

• The whole pipe, including the output into the ventilation shaft, are located above the furniture;
• the height at which the visor is located is sufficient to ensure that the pipe is not visible from anywhere in the room.

By the way, if in general this option is suitable for you, but the furniture is already purchased, and it does not have a visor, it can be ordered additionally or even make it yourself. It will turn out at all expensive.

The most common way to resolve this issue in terms of proper planning and design is to hide both the hood itself and the duct behind the facade of the kitchen set.

However, the hood can be left outside, then it will serve as an additional element of the decor.

The kitchen set with the cornice will make the corrugation almost inconspicuous

The designer who will design furniture will take into account the features of your kitchen and arrange the design inside the hinged cabinets. This, of course, will demand to sacrifice a rather large amount of useful area in the storage system, but it will be an ideal option when no one even guesses that it is hidden inside. This option is suitable if:

• You are at the stage of planning new furniture for the kitchen;
• The access to the ventilation shaft is located at the same height where future lockers will hang;
• The area of ​​the kitchen allows you to place a sufficient number of cabinets, some of which can not be used in full.

Why hide pipes?

The main final result of these efforts. the hood together with the air duct should harmoniously fit into the kitchen space, “not cut” the eyes. It is not always necessary to even hide the pipe from the hood. So, in the kitchen decorated in the high-tech or loft style, such a metal element is more likely to complement the general view than spoils. If you use a plastic pipe with a rectangular cross.section, it does not attract attention and looks good in most modern light kitchens.

Attention! The kitchen designer earned on our site. You can familiarize yourself with it and design your dreams for free! The designer of the wardrobe designer may also be useful.

There is no pipe in circulation hoods, as they purify the air and return it back to the room through the filter system, and do not bring it to the ventilation shaft. And the hood itself is often small, has a neat appearance and does not require disguise.

And yet, most people use running hoods with an air duct. They better clean the air, serve longer, do not require complicated care and filter replacement. And the simplest and cheapest duct is aluminum corrugation, unfortunately, does not improve the type of kitchen at all.

Five options for masking an exhaust pipe

The choice than to close the corrugation from the hood is determined by many factors. It depends on the height of the ceiling, the length and shape of the duct itself, financial capabilities, the stage of work (repair is only done or is already completed) and of course the style design of the kitchen.

All numerous versions can be reduced to 5 main types.

Plastic box

A plastic box will help to hide the hood in the kitchen if the pipe is small in length and without bends. This is possible if the access to the ventilation shaft is located directly above the hood and the stove. The stores represent plastic boxes of different colors, shapes and sizes, so the selection of a suitable product will not become a problem.

Gypsum cardboard box

A common and effective way to hide the hood of the hood. the execution of a gypsum cardboard box. From this material you can build a design of any shape. Drywall. inexpensive material, and work with it can be able to most non.professionals.

First, the contours of the future box on the wall and the ceiling with a pencil are outlined. To make the lines even, use the level and ruler. It should be borne in mind that between the pipe and the walls of the box there should be a free distance of about 3 cm on each side.

Next, metal guide profiles are fixed, to which small segments of metal structures are fixed evenly along the entire length. Sheets of drywall are fixed on the finished frame of the desired size. As a result, you get a ledge from the wall or in the corner between the wall and the ceiling along the entire length of the pipe. It can be painted to the color of the walls, poured with wallpaper, close the stretch sheet, install lamps.

We build in a kitchen set

A simple and convenient solution for how to hide the extract of the hoods in the kitchen is to use furniture for these purposes. In the cabinets of the upper row of the kitchen set, holes are performed under the duct pipe. One locker is located above the hood. Sometimes the hood itself is also built, leaving only the control panel free.

If then the pipe turns to the side, in the neighboring lockers a hole under it is made in the upper part. So, the entire course of the corrugation remains hidden from the eyes until the building is exit to the building ventilation system. On top of the output is closed with a decorative lattice, and in the lower part it is advisable to install a special valve that prevents the ingress of spent air again into the room.

A cabinet located above the stove can also be used to install an extract of a circulation type. She does not have a pipe, but the place over the hood is not empty, but is involved in storing dishes and other kitchen utensils.

Decoration

Even easier. paint the pipe in the color that corresponds to the design of the kitchen. True, the effect of such a disguise will not arrange far.

In cases where the pipe goes along the wall above the cabinets, the installation of a decorative skirting board or cornice along the front edge of the top of the furniture will be a successful solution. The duct in the corner between the wall and the upper cabinets is almost invisible, and with an increase in the height of the facades, it is not visible at all. Decorative baguette is well suited with the classic version of the kitchen. You can install a panel that simulates the continuation of the cabinets.

The least space over the cabinets is occupied by pipes with a rectangular cross section. It is important that the cross.sectional area of ​​the pipe is no less than the area of ​​the output of the ventilation shaft. Otherwise there will be insufficient thrust.

Stretch ceiling

If the duct is planned to be closed during the repair of the kitchen, you can stop choosing on a stretch ceiling. Beautiful design is guaranteed. The only negative is that there is a risk that when a breakdown, you need to disassemble the structure, which is not very convenient and expensive. over, the installation of a stretch ceiling requires special equipment and professional skills.

It’s easier to get if the suspended ceiling is assembled from panels or tiles. In this case, only part of the ceiling can be dismantled in the immediate vicinity of the duct, and then it is easy to install everything in place.

Another exit is to create a two.level ceiling. On the perimeter of the kitchen, you can construct a second level under which the pipes will not be visible. The lower row can be organized in places: one above the kitchen set and hood, the other above the dining table or bar counter.

Structures that are created to mask the duct can perform other functions. Sometimes they are decorated in bright colors, contrasting with respect to the walls and the upper level of the ceiling. Then they become the main accent in the kitchen, make it a unique. They can organize additional spot lighting on them. This will improve working conditions in the working area and will look attractive.

Hide engineering communications for the ceiling will turn out at a high height of the room. When building a suspended or stretch ceiling, about 15 cm of height is lost. In cases with a small kitchen, it is better to think about another option for masking the air duct.

Kitchen cabinet or mezzanine

You can hide the pipe from the hood in a simpler way. It is enough to install a suspended cabinet that matches the style of kitchen furniture above the hood. True, it will not work to use it for its intended purpose as a place for storage: in the lower and upper parts you will have to cut a hole that matches the diameter with a ventilation pipe, and remove traditional shelves. Nevertheless, the overall interior decor will be preserved, and it is unlikely that anyone will guess that not spices and small utensils are stored outside the cabinet door, but hidden an exhaust duct.

To completely hide the pipe passing along the ceiling, you can install the mezzanine, which will also perform the function of “storage” of the corrugated duct.

Plastic box

Effectively hid the pipe using a plastic box. Such options exist in different design, have a wide selection of shapes, colors and decor. Some models can even be equipped with built.in backlight. But the option with a box of plastic is suitable only if the duct’s hole is located in close proximity to the hood.

How to close the corrugation from the hood in the kitchen, constructing the channel through furniture

Another way to hide the corrugation is to embed it into the cavity of a hinged cabinet.

The advantage of this method of masking is the ability to preserve the pristine interior of the kitchen and increase the functionality of furniture by using its free space.

To achieve these goals, it is recommended to draw up the manufacture of furniture to order so that the project already provides for the possibility of hiding corrugation. The plus will be the possibility of easy dismantling and replacing pipes if necessary.

For the successful installation of the hood and its air duct, the following should be performed in the cabinet:

• build an aluminum valve to prevent air from ventilation from ventilation;
• make a hole for him at the top of the cabinet, place the valve in this place, subsequently attaching with mounting glue;
• Remove the element of the kitchen set in its bottom, using a jigsaw, cut a hole, focusing on the dimensions of the hood;
• Remove the shelves and cut holes for the air duct into them;
• In the upper shelf, make a hole for the valve, leaving the allowance on each of the sides by an equal 3 mm;
• lay the piece of furniture on the back wall and insert the corrugation;
• The upper edge of the corrugation is formed in a square in order to stick into the hole;
• Cut the corner of the corrugation along the edges and bend;
• install the locker in place and insert the valve into the ventilation.

In conclusion, the hole is installed in the lower part of the cabinet, fixing it with screws. The corrugation is put on the pipe and fixes with the help of a clamp.

What is often forgotten about

Cabinets for the ceiling are appropriate in modern interior styles

In most cases, when the owners ask the question of the width of the upper row of cabinets, they say that it should coincide with the width of the lower, they say, such furniture will be much more spacious. You can’t argue with this, but there is one nuance: the massive upper row “presses” very much, creating a feeling of heavyness of the headset.

The third row of cabinets harmoniously fits only into modern interiors with their smooth facades, decorated, for example, in the style of minimalism. But the designs of Provence, Country, the classic will look difficult, especially if there is a pronounced texture of the tree.

The most optimal option is to make the head of the headset “transparent”. To do this, arrange it with a decorative fence, and arrange a variety of jewelry on top. It can be baskets, water lilies and other decor elements that are ideal in style.

Continuing the theme of kitchens, read article 9 of ideas on how to equip the perfect dining area in odnushka, where there is nowhere to turn around

Five options for masking an exhaust pipe

When installing a running hood, it is important to provide options for how to hide the duct so that the pipe does not spoil the impression of the style of the kitchen. The sleeve is decorated using various materials and technologies. A number of requirements are presented to masking structures:

• aesthetics and presentable appearance;
• resistance to elevated temperature regime;
• moisture resistance;
• resistance to chemical effects and ultraviolet light;
• Easy to care and maintenance.

Working on the task of how to hide the corrugation from the hood in the kitchen, it is worth considering that the masking structures are also designed to help reduce noise from the electric motor of exhaust equipment.

Plastic box

The easiest way to hide the duct in the kitchen using a plastic box, if the distance between the hood and the entrance to the ventilation shaft does not exceed 3 m. A huge assortment of current products is presented on the profile market, vary in an affordable segment. The design is easily mounted: plastic boxes are produced in the finished form, and it is not required to waste time assembly.

Plastic box for hood

Gypsum cardboard box

The solution will successfully fit into any interior and attracts the variability of execution. A drywall box is placed vertically with a mount to the wall or a horizontal structure is built in the space between the ceiling and the upper perimeter of the kitchen set. In order not to violate a single style solution of the interior, the surface of the box is finished with the appropriate materials.

Gypsum cardboard box

We build in a kitchen set

To hide the corrugation from the hood inside the kitchen, in the project of the furniture composition, hanging cabinets with special communications for communications are provided. The sleeve takes a little space in the module, the rest of the space is used for its intended purpose as part of the storage system of kitchen utensils.

Hofra from hoods inside the kitchen set

Decoration

The budget method of masking the exhaust pipe is painting. To do this, choose colors in the style palette of the kitchen. The air duct’s decor with the help of coloring trains is a priority among those who are not interested in significant costs for the arrangement of kitchen equipment.

Stretch ceiling

Systems of stretch and hinged ceilings are also in demand as structures that hide an exhaust pipe in the kitchen. Tile and panel solutions are relatively inexpensive, most often they are carried out without involving specialists. If necessary, maintenance and repair of communications inside the suspension system, the corresponding surface sector is dismantled, after planned measures, the panels are inserted back.

Pipe masking with a plasterboard box on your own

For the construction of a decorative gypsum cardboard, special knowledge is not required. Work is performed using instruments from home arsenal. To properly organize the process of masking the pipe of the hood with drywall, the necessary calculations are made, on the basis of which the necessary materials are acquired.

Tools and materials

To hide the duct under drywall, you will need the following set:

• power tools. drill, peorator, lobe, electric screwdriver;
• construction level, roulette, marker;
• scissors for metal;
• metizes. screws, dowels, fasteners, clamps;
• metal profiles for the frame. guides and intermediate parts;
• drywall in consumption quantities.

It is also necessary to prepare materials for finishing the drywall box, which will hide the duct in the kitchen.

The course of work on pipe disguise

At the preparatory stage, measurements are made and the project of the future design is carried out. The main works provide for the following sequence:

• Marking. Using the leveling, horizontal and vertical lines are marked on the surface of the walls and ceiling;
• Installation of profiles. The guides are installed on the given lines using dowels. Further, vertical parts are attached to the profiles with self.tapping screws;
• Installation of corrugation. The sleeve is installed inside the frame, connected to the hood and the ventilation shaft.

Pipe masking method in the kitchen

Next, the installation of drywall is performed. The frame is sheathed with blanks using self.tapping screws, joints are sealed with a construction solution or a special sealant.

Barrow finish

The plasterboard box is decorated in accordance with the overall style of the kitchen interior. The surface can be thrown and stirred, painted in a tune with a set of gamut, pasteen with wallpaper or use other finishing options.