Home Washing machines How to get your socks out of the washing machine
Washing machines

How to get your socks out of the washing machine

Bra in the washing machine

What’s the harm?

If a bone from a bra got into the machine, and the user ignored this fact, the following problems can occur:

Guy Dismantles Washing Machine To Find His Missing Socks

  • Mechanical damage to parts of the machine. At high speeds of rotation, the solid element acquires enormous force. it can easily pierce the walls of the drum, violate the integrity of the tank or the heating element. You will have to repair the damaged elements and fight the flood.
  • Damage to the rubber seal around the door.
  • Locking the rotation.
  • The bone, though not interfering, but stuck somewhere in the depth will eventually begin to rust and begin to stain the clothes that are washed in the machine.

You can tell if the pit is stuck by the outside noise. It can be removed in the same way as any other objects. by disassembling the machine. The instructions we gave you above.

your, socks, washing, machine

How to get?

The process of extraction depends not only on the location of the object, but also on the material from which it is made. Bra inserts are made of plastic and metal. The iron ones are much more dangerous. they can seriously damage the machine. But it is possible to remove them magnetically, without disassembling the machine. To remove the plastic counterpart, you will need to disassemble.

Removing through the heating element

The method is suitable for models with a heating element at the back. Sequence of actions:

  • Disconnect the appliance from the mains. remove the plug from the socket.
  • Turn the appliance upside down so that it is easy to reach in from behind.
  • It is good if there is a service hatch. you can work through it. If it is not there, remove the wall and remove the heating element, disconnecting the wires. After taking out the “lost”.

And if through the drain?

If the bra element is stuck in the spigot, it is removed from the bottom. The order is as follows:

Washer Eating Socks? How to Remove Common Items From Your Front Load Washer | PartSelect.com

  • Disconnecting from the power grid;
  • Putting the unit in a comfortable position;
  • Removing the laundry detergent container;
  • Turning the machine on its side;
  • Unscrewing the screws and removing the retainers that fasten the bottom of the machine. so you can get to the drain spigot;
  • Removing the spigot;
  • Removing the bone. Cleaning and installing the spigot. Assembling the machine.

Without disassembly

If the bone is at the bottom of the tank, you can do without disassembly. Flashlight and something thin, such as a needle or wire, are handy tools. After establishing the exact location of the missing thing, it is picked up with a hook made from a wire/spike. And the hooks must be at both ends. The item to be extracted is pinched first. The other is useful in case the fate of the bone from the bra. Slipping the hook into the hole, pick up the item and slowly twist it until the insert from the bra stands upright. As soon as the end of the bone is caught in the hole, the pliers come in.

The washing machine is clogged? Determine if it makes sense to take independent action to correct the situation! You can tell when a problem occurs by the noise you hear: you’ll hear a knocking or clanking noise. The home handyman himself will cope with the root cause of the problem.

Removing foreign objects from the washing machine: expert help

If you have no idea how to get an item of clothing, there is no guarantee that you will not aggravate the situation. Open the case carefully, so as not to break. If you encounter a problem, call us! The operator takes requests from 8 am to 9 pm daily. If you didn’t have time to call a master during working hours, you can fill out an online application.

Get to the bottom of the tank

If “non-disassembly” methods are unsuccessful, you will have to put more effort into the search. First of all, it is obligatory:

  • Unplug the equipment’s power cord from the power outlet;
  • Disconnect the appliance from the house network;
  • Pull out the appliance to a spacious place convenient for further work.

Next, it is necessary to open access to the heating element. The location of the part depends on the characteristics of each particular model of washing machine. On some appliances, the heater is located behind the front wall, on others. directly behind the back cover. After unscrewing the screws, remove the enclosure wall and find the place where the heating element is fastened. Photograph the location of the wires after that, loosen the nut and remove the element from the housing. Your attention will open a small hole, where you can also find a jammed thing.

How to remove a foreign object from the washing machine: step by step instructions

When washing different clothes in the machine, the user unintentionally clogs the unit with various small parts. These can be handkerchiefs, bra bones, socks, buttons, coins. And these objects get stuck in the most incredible way. Socks and handkerchiefs, can wrap around the drum shaft, buttons, buttons and bones from women’s clothing, can get stuck between the walls of the device and the drum. How to remove foreign objects from the machine without damaging the equipment? About secrets of extraction of small parts and things, will tell the professionals engaged in repair of the washing equipment.

Difficult situations

It often happens that it is not at all easy to remove a sock from the machine. If the sock happens to be in the upper part of the drum, there are much more manipulations to be done.

  • Unscrew the drum bolt.
  • Remove the pulley and put the bolt in its place.
  • Take a hammer, knock the drum shaft out of its bearings.
  • If the drum lends itself to displacement, begin to twist slowly to get the stuck sock out. Once it is in the bottom of the machine, use a thin piece to pick it up and remove it.

It happens that a sock under high water pressure penetrates the pump filter or drain hose. The first thing to do is to check the drum. If there are no socks, keep going. It is necessary to find the entrance to the pump filter through the hatch. To get to it, you can use the door, located on the front of the washing machine. Open the hatch, remove the filter, take out the lost sock. At the same time rinse the device, put it back.

Where to look for a sock

Where socks go in the washing machine most often:

Finding a stuck sock can only be done by hand. Therefore, probing the elements of the washing machine can take quite a long time.

The consequences of clogging

Clogging your appliances with foreign objects doesn’t bode well. Very often such clogs provoke clogged drains and lead to the fact that the apartment can be flooded. In addition, some parts can be damaged, such as the drum. if the sock interferes with its normal operation.

Even if you’re not sure if you start washing exactly 2 socks. it’s better to reassure yourself and make sure it’s not stuck inside. Caution will help you preserve the integrity and function of expensive equipment.

Is your washer really stealing your socks?

How to get your socks out of the washing machine

Many of us are familiar with the problem of disappearing socks after washing in a washing machine. There are many different reasons for this phenomenon and versions of the possible location of these items of clothing.

One thing is certain: if a sock was placed in such a machine, it will stay in it.

Socks lost in this way can be found if you know where to look for the loss most expedient. Let’s find out where your socks disappear to.

Small socks can penetrate the gap between the drum and the tank of the washing machine. To remove a sock you need to disassemble the washing machine to get access to the hole for the heating element. Because of one sock, of course, you should not do it, but the constant ingress of various small items of clothing there can lead to a breakdown of the device.

If all these methods did not help, try to find the missing sock as follows:

  • unplug the power cord from the socket;
  • Pull out the machine to a spacious place for convenient further work;
  • open access to the heating element in some models it is behind the front wall, in others. behind the back cover;
  • unscrew the mounting screws and remove the enclosure wall;
  • Look for the place of attachment of the heating element;
  • Photograph the location of the wires, then loosen the nuts fixing them to the heating element and remove the element from the housing.

A small hole will appear where you can see the jammed item.

The heating element should be removed with extreme care. If the heating element cover is damaged, it can be replaced. If the heater is dirty, you can clean the element of plaque and debris using citric acid.

Of course, if you are afraid of breaking the washing machine, it is better to call a specialist.

Author

Kerariel

| Denial of responsibility | Contacts |RSS