How to properly drain a washing machine: a step-by-step guide and valuable tips
It is difficult to overestimate the role of washing machines in everyday life. Unfamiliar with fatigue units diligently perform some of the routine duties for the owners. Unfortunately, their mechanisms are characterized by periodic failures. Therefore, it is better to find out in advance how to drain the washing machine, so that in case of a breakdown you know what to do.
How to Drain the Water Out of Your Washing Machine
We will tell you how to empty the tank of the washing machine if the programmed work cycle is not completed. In the article we have described all the acceptable, tested in practice methods. Our recommendations will help to properly prepare the technique to restore performance.
Drain hose
The easiest method that allows you to drain the water most quickly. Procedure:
- Turn off the power, shut off the water supply.
- Disconnect the drain hose from the back panel.
- Pull the outlet from the sewer pipe.
- Place the end of the hose in a container (bowl or basin), standing below the level of the washing tank. The tank must be low, it is difficult to drain in a bucket using this method.
If the washing machine does not drain in this way, then it has a leakage protection from the sewer hose. Inside the cabinet, manufacturers make an additional loop drain hose or install a plastic elbow, so the drain hose is always above the level of the tank. Most often found in washing machines Bosh and Simens.
See also. Samsung washing machine trouble codes
How to drain an LG washing machine
LG washing machines are some of the best on the market. Besides the highest quality and attractive price LG washing machines can boast of a wide model range and various useful and life simplifying options, such as steam washing, drying, the possibility to control by means of a voice assistant, etc.д.
Another indisputable advantage of LG washing machines is their user-friendly and intuitive controls. Switching between modes, using the various additional functions of the LG washing machine is elementary simple.
Nevertheless, there may be difficulties with some rarely used options. These include, for example, forced water drainage. This function may be needed in several cases:
- If a special wash mode has been selected that does not automatically drain water, such as Delicate Wash or Wool (washing woolen items).
- If there is a need to urgently suspend the washing process. For example, an item not intended for washing has accidentally fallen into the drum.
- If the wash has been interrupted due to a system error or external problems (e.g. electricity problems).
Depending on the situation, you can quickly and safely drain your LG washing machine in one of several ways.
If the washing machine LG works correctly, perform a hardware drain.
- Stop the washing or rinsing process by pressing the Stop/Start button on the front of your LG washing machine.
- Set the programme selector to Spin mode.
- Activate the No spin mode. To do this, press the Spin button on the front of the LG washing machine several times, until the No Spin indicator lights up.
By timer, the forced draining of water in the LG washing machine takes about a minute. You will be able to open the door when the water is completely drained.
If you see an error code on the display and the washer-dryer does not respond to commands (pressing system buttons), you must drain the water manually.
In LG washing machines this can be done through a garbage filter. Disconnect your LG washing machine from the mains before starting to drain using this method.
Garbage filter protects the pump of the LG washing machine from small debris that may end up in the drum with the things.
Important: After you open the filter, the water from the washing machine’s tank will start to drain through it immediately. It is advisable to place an empty container under the filter to prevent water from leaking onto the floor. Or use an alternative method.
Locate the emergency (drain) water drain hose on your LG washing machine. It’s located right next to the trash filter in the technical hatch in the bottom right corner of the front of your LG washer and looks like a small black hose with a plug.
Push the drain hose outwards, taking care to be careful. Place a container underneath it and open the plug. Once the tank is full of water, you can screw the plug back on to stop the process of draining your LG washing machine.
Important: The way to drain the washing machine through the emergency hose is convenient, but you must remember that this way not all the water is removed from the machine: some liquid remains in the spigots and in the volute. In order to drain the entire machine, you will need to unscrew the garbage disposal.
Another reason why the LG washing machine won’t drain can be physical damage to the drain hose that connects the washer to the drain. Before starting any operation on the washer-dryer, make sure that the drain hose is not pinched.
It is highly discouraged to disassemble the LG washing machine to drain the water or even break the door lock to open it forcibly. Both of these ways can cause the machine to break down. If you for some reason cannot drain the water by any of the above methods on your own, it is necessary to apply for qualified assistance, for example, to the LG Service Center, where high-level specialists will help to solve the problem.
Regardless of the manufacturer of the appliances, there is a single system that allows you to quickly and seamlessly remove the liquid from the appliances. Water in the drum of the washing machine after washing in large quantities is a deviation from the norm, so it is important to find out the cause of the failure and eliminate it. To find out why there is water left in the tank, you need to contact experienced professionals who will be able to determine the cause and fix it on the spot. Before performing any manipulations with the washing machine, you must disconnect it from water and electricity. Drainage can be done in several ways:
- If the technique involves the presence of an emergency drain hose, it will be easiest to pull it out of a special compartment next to the drain filter and open the opening of the tube. Since the hose has a small diameter, the process of draining will be quite long. In some cases, water may remain, which can be removed by other methods.
- By means of a drain hose. This method involves removing the contents by disconnecting the hose from the system and putting its end into any container that is below the level of the technique. Liquid in most cases drains itself, but in some models of equipment, this function is not provided.
- The second method involves draining the liquid through the drain filter. To perform the procedure, you need to open the hatch or remove the panel on the machine and tilt the washing machine on its side towards the drain hole. It is worth taking into account that quite a lot of water can be drained and you should prepare a bucket or basin in advance.
- Another simple way is to drain through the hatch. If the tank is filled with liquid, it is necessary to stock up on a rag to remove it from the floor. It is very convenient before opening the hatch to tilt the machine in the opposite direction so that the water does not pour out on the floor.
- Draining through the drain pipe. In some cases the cause of the washing machine’s refusal to drain is a clogged pipe and, as a consequence, the inability to drain by the preferred methods. By unscrewing the spigot you can clean the clog and remove the liquid from the household appliance.
It is important to do all manipulations as carefully as possible, because during the sloppy draining may break other parts, which will become a real problem and can lead to more expensive repairs.
Drain using the emergency hose
Not all washing machines have an emergency drain hose. Outwardly it resembles a small tube. Located next to the drain pump filter.
- Open the decorative hatch/panel on the front of the washing machine.
- Tilt the machine backwards and put a basin underneath.
- Take out the emergency hose, point it into the basin, remove the plug. Water will flow, but it will take a long time to drain.
How to drain the washing machine in all ways
Often there is a situation where it is necessary to drain the washing machine, for example, when the program fails during the washing, or because of a broken drain pump. Many users do not know how to forcibly remove water manually. Consider the basic methods and order of operations for different brands and models of washing machines.
How to drain the washing machine by yourself
Drain the liquid by the drain hose
This method is the easiest. It consists of the following steps:
disconnect the drain hose from the back of the machine. Then you need to remove it from the sewer pipe liner.
Place the hose so that it is below the level of the container of the washing machine along its entire length.
Lower the end of the hose into a pre-prepared container. Next, the water should go by gravity.
Using this method, you can drain almost all the liquid in the drum. However, this method is not suitable for every model of washing equipment. For example, some models have a special loop inside the body of the washing machine in the hose. It does not allow water to drain spontaneously during the washing process.
Therefore, in these models remove water with a hose will not work. Your washing machine may also have this feature. To check it, you need to read the manual.
How to drain the water through the drain filter?
This detail prevents foreign objects from getting into the pump. Drain water through this filter in the following way:
Remove the front panel or open the hatch.
Lean the appliance against the wall. Or hold it so that a container fits under it.
How To Drain Water In A Washing Machine-Tutorial
Unscrew the drain filter. You don’t have to do it all the way to the end.
How to drain the washing machine with an emergency hose?
Many models of washing machines are equipped with an emergency hose. It can be found behind the door of the small hatch. Drain the water in the following way:
Remove the plug located in the hose and drain the water into a pre-prepared container. The diameter of the hose is small, so the whole process will take a long time.
If the above methods do not work, then you can drain all the water through the machine hatch, only if it is not in a locked state. Open the door and then scoop out the water from the drum by hand.
The actions are performed in the following order:
Before draining the washer-dryer, you must determine the water level in the washer-dryer. It can be higher than the bottom edge of the manhole. Then you need to tilt the device backwards, and then carefully lean it against the wall. After opening the hatch, the water will not come out on the floor.
Scoop out the water with a ladle, jar or other object.
The disadvantage of this method is inconvenience. The work takes a long time and not all the water can be drained.
Drain water using the drainage pipe
Drain water through this element only as a last resort, if the previous four failed.
If at the time of removal of the drain filter has not drained water, then most likely there was a blockage in the socket. Using this method you can not only drain all the liquid, but also eliminate the cause of the stoppage of the machine with water.
The actions are carried out in the following order:
Remove the panel of the machine from the back side;
Place a suitable container under the branch pipe, and also put a dry cloth under it;
Remove the clamp by which the branch pipe is connected to the pump. Then disconnect the nozzle. At this point, all the water will come out of it;
If there is no water, then the branch pipe is clogged. Remove the blockage inside the drain pipe with your fingers.
To remove water in this way is difficult enough and not everyone can cope with this work.
Specialists identify several reasons why the liquid stops flowing out of the washing machine drum. Some of them can be eliminated.
The drain pipe or the water outlet filter is clogged with debris or small objects.
Get rid of the clog by mechanical or chemical method. This can be done both with their hands, and by calling a master repairman for washing machines at home.
Programmer or control module does not work (depends on model).
Have the control board repaired or replaced.
What to do if your washer won’t drain (Bosch Axxis models only)
There is a problem with the pressostat (sensor that measures the amount of water).
Delicate mode selected, which prevents the appliance from draining.
Carefully read instruction manual and choose adequate washing mode.
Drain hose connecting unit to sewer system is kinked or kinked.
Set the drain hose to the correct position.
Press “Pause”, wait until the door unlocks, remove some of the wet clothes and continue the process.
Important! Finding and fixing breakdowns in the washing machine should be carried out only when the equipment is completely de-energized.
Ways to drain the water
Before looking for the cause of the fault, de-energise the washing machine and drain it; the volume of liquid inside sometimes reaches thirty liters. Depending on the type of technical device, choose the most convenient way to get rid of water for you.
New style washing machine
Locate the emergency drain hose at the bottom of the housing, place it in a basin (or other low container) and remove the safety valve. Drain the water. Then open the door and take out the laundry; it is your own responsibility to wring it out.
If your washing machine has no emergency hose, drain through the special round opening on the underside of the body. Sometimes a small panel covers it. Slightly tilt the housing backward and lock it in place. Place a suitable container underneath and gently open the drain filter by carefully removing the cover without excessive force or sudden movements. If the filter is so clogged that it cannot be opened, you must reach the drain connection between the drum and the pump and drain the water through it.
For machines not fitted with a non-return valve, the following method is effective: feed a little water into the drain hose for 3-5 seconds, then place the free end of the hose into the tank, placed below the level of the tank. The difference in pressure will set the liquid in motion, and the drum will empty.
You can visualize these methods of water drainage in the following video.
The washing machine of the old type
In homes without central water supply and sewage system, preference is given to machines of the old type, which belong to the activator type. Water in such devices is poured through the top, and drained through the drain hose, located at the bottom of the body.
You can remove water from the tank of the activator machine in the following ways:
- Tilting the construction so that the liquid flows out over the edge;
- Using a pump;
- By scooping out the water with a ladle or other suitable utensil.
