Home Gadgets How to Create a System Image Windows 11 2 Ways. Windows system image manager
Gadgets

How to Create a System Image Windows 11 2 Ways. Windows system image manager

Install and Configure Windows Deployment Services (WDS) 2016 – Automation with System Image Manager (SIM)

When you deploy images with WDS you need to go through Windows installaton by choosing which image you are going to use, you need to accept license etc. which is very time consuming if you need to deploy same image to many machines. In this post we will go one step further and perform a clean installation without any user interaction. To make this work we need to create a special file with the answers to those question (like accepting AULA, choosing partitions, region and language etc) which you can save in the bootable media and the setup can read automatically to perform an unattended installation of the OS.

Before we continue you will need to download Windows Assessment and Development Kit (ADK), and you will need to have Windows 10 install media and the test machine. I will perform this on Windows 10 1809 so I downloaded ADK for that version of Windows. In production environment you would install OS, update it, install apps and perform all customizations and then your would sysprep it. Next you would create a capture image which you would deploy to the clients.

Start the ADK installation and clear all pre-selected items. Only thing that you need to select is Deployment Tools. Click Install

SIM INTRO

Once done, start the Windows System Image Manager

  • Distribution Share Pane – All of your deployment files and folders will be stored here
  • Answer File Pane – Here will be answer file when you create a new one
  • Properties Pane – Here will be all the properties that we will configure
  • Windows Image Pane – Here you begin and choose the install image
  • Message Pane – here we will get information about validating our answer file to make sure it is going to work before we go and try it out.

Let’s start by right-clicking on Select a Windows image or catalog file and choose Select Windows Image

Navigate to the folder you exported the Windows 10 installation files and inside the sources folder, select the install.wim image file, and click the Open button.

When you click Open you will get a message to create a Catalog file. This is a file that contains all the settings and all the properties that you can put into an answer file and configure. Click YES to continue. It will take some time so be patient. The.clg file will be saved in the same location where the install.wim is stored.

Once done we will see 2 folders created.

Before expanding those let’s right click on the Create or open an answer file and click New Answer File

Once done we will see the different stages that the Windows Installation goes through. As you can see all of these stages have a special name. They are called configuration passes. Even if you see 7 you don’t need to configure all of them.

create, system, image, windows
  • Windows PE – Here we begin the installation, we are configuring the language, disk partition etc.
  • Offline Servicing – Here we can patch our images (.wim files) offline
  • Generalize – This is the pass that store info for our SYSPREP generalize settings
  • Specialize – We always use this one. This configuration pass is used to create and configure information in the Windows image, and is specific to the hardware that the Windows image is installing to.
  • Audit System and Audit User – allows us to setup the machine so that we can boot back in one time after installation was completed. all drivers installed etc. so you can check that everything is find and working properly. The next time someone starts that machine then he will get sysprep menu wizard.
  • Oobe System – Out-of-the-box experience

Passes that are allways used is 1, 4 and 7.

Now to get all of these populated we need to expand Components Pane and right-click on some component and select where to add it. Some components can be added to multiple passes and some of them can be added to only one.

Example (Under Windows Image – Expand components and right-click on one.

Once the setting has been added in answer file then we can highlight that component and then in the properties we can configure the properties of that component.

This is a very complex tool so it will take time for you to explore everything. You will need to do a lot of testing to see what this tool can do. After short intro let’s built our answer files. We will need 2 answer files to make this work.

CREATING ANSWER FILES

Under Windows Image Pane, expand Components and right-click on amd64_Microsoft-Windows-International-Core-WinPE_10.0.10586.0_neutral and select Add settings to Pass 1 windowsPE

Configure the language settings and expand the component.

Click on SetupUILanguage and specify the language settings

We are done with the first component. The next component that we will configure is amd64_Microsoft-Windows-Setup_10.0.10586.0_neutral. Expand it, expand the Disk Configuration and right-click on the DISK and add it to the 1 pass.

Usually you will have only 1 drive so under DISK ID type 0 and under the WillWipeDisk select True.

create, system, image, windows

Now you will notice if you expand DISK you will see Create partition and Modify partition but you will not be able to configure it. There are like empty boxes. It is because we need to add it to our answer file. Right-Click on Create Partition and Modify Partition and add it to Pass 1.

We need to create 4 partitions. In order to add additional partitions you will need to right-click on Create Partition and select Insert New CreatePartition

EXTEND – False.

ORDER – Partition get started with nr 1. Drive is 0

TYPE – Primary.

SECOND PARTITION

EXTEND – False

THIRD PARTITION

Extend – false

FORTH PARTITION

Extend – true

Type – Primary

Modify Partitions is next. Right-Click on Modify Partition and Insert New Modify Partition. Make sure you have 4, one for each created partition.

FIRST MODIFY PARTITION

Format – NTFS

Label – WinRE

Partition ID – 1

SECOND MODIFY PARTITION

How to Create a System Image Backup in Windows 10 for Free? (2 Ways Included)

Partition ID – 2

THIRD MODIFY PARTITION

Partition ID – 3

FORTH MODIFY PARTITION

Format – NTFS

Label – Windows

Partition ID – 4

Next 2 components we need to add in Pass 1 are the UserData and the WDS. Right-Click on those and add it to our answer file.

Under the USER DATA, accept the AULA and expand the User Data. Under the Product Key enter the product key you would like to use. I use generic one, and you can find those on the internet.

Before we go and configure WDS component, switch to your WDS server. We need to point answer file to a specific image. In the WDS console, right-click on the image you would like to use and select Properties

You need to copy image file name, image group and the image name and paste it to Windows Deployment Services – Image Selection – Install Image

Filename : install.wim

ImageGroup : Windows 10

ImageName : Windows 10 Enterprise

Click on Install To and configure it like below

DISK ID – 0

PARTITION ID – 4

Click on Login/Credentials and enter the domain name and username and password.

Now that we have configured all the options for our first answer file, let’s validate it just to make sure that we have not errors. Click on the Tools – Validate answer file

As we can see there are no errors in Message pane so we are good to go.

Next, click on the FILE – Save Answer File and save it to RemoteInstall\WdsClientUnattend (On the WDS Server) with the WDSClientunattend

Once done, open your WDS console – Right-Click on your WDS server and select Properties

Click on Client Tab and Enable Unattended installation. I am using machine with UEFI so I will add my file to it. Click on Browse and add your unattended file there. (RemoteInstall\WdsClientUnattend)

We are done with our first answer file.

CREATE SECOND ANSWER FILE

Go back to your SIM and select File – New Answer File

The next component that we gonna add is the amd64_Microsoft-Windows-Shell-Setup_10.0.10586.0_neutral. Add it to Pass 4

Here I will specify computer name, generic product key and the Time Zone. Remove all unmodified components.

One more time, go back to Windows Image Pane and add Internal-Core_neutral to Pass 7 and configure the Language settings

Next component we need to add is the Windows-Shell-Setup_Neutral. I will expand it and add OOBE and User Account to Pass 7. (As you can see, there are a lot of settings so it will take time for you to explore and test everything)

Click on Shell-Setup and configure the time zone.

Next, expand the Shell-Setup and click on OOBE. Configure Hide EULA and rest of the settings, and Protect the PC ( 1 means as soon as the update is available, go ahead and download it)

Once done, expand the User Accounts (We need to create a local user account)

Under the Administrator Password – Enter the pass you would like to use.

Right-Click on Local Accounts and select Insert New Local Account

Specify the Displayname, description, group and name, and click on the Password and enter the local admin password for that account.

Final step is to click on the Tools and Validate the file. If you see any warnings or errors make sure you fix them before saving the file. You will need to remove all the unmodified components as well. If there are no errors go ahead and save the file into the same location on WDS server (RemoteInstall\WdsClientInattend)

Once done, open WDS console, browse to your image group and right click on your image and select properties.

Tick Allow image to install in unattended mode and select the answer file we just created.

Now it time to test these answer files. I created new Hyper-V machine called WIN02. Once started it will install OS without user interaction.

That’s it. As you will notice, you can automate not only image installation, you can join machine to a domain, configure auto-login and much much more. I hope that this will be a good start point so that you can customize, add more components and automate more settings. Feel free to comment if you have any questions regarding this subject.

How to Create a System Image Windows 11 [2 Ways]

With the release of Windows 11, a large number of users have installed it. But many users don’t know how to create a system image Windows 11. Here is a complete guide provided by MiniTool.

Windows 11 is the next version of the Microsoft Windows 10 operating system that was revealed on June 24, 2021. Since it’s released, a lot of users can’t wait to have a try. However, various issues also come like Windows Hello not working, Go Back button not working, etc. So, many users intend to create a Windows 11 system image backup that they can restore the system or prevent data loss when some problems occur.

A large number of people want to download Windows Server 2019 ISO. If you are also trying to find a Windows Server 2019 ISO, this post is what you need.

Important Things to Create System Image Windows 11

The Windows 11 system image is an extract copy of your computer’s entire partition that contains every item of data in the partition: operating system, installed software, hardware drivers, settings, and so forth. It is a quite large single file that you can store on an external storage device. That is to say, the system image will take up a lot of disk space.

Well, the size of the system image Windows 11 may vary depending on different factors, including the size and number of partitions, installed programs, and other settings. It’s usually equal to the size of your system partition if you don’t back up the entire hard drive.

Anyway, make sure that you have enough free space on the target drive to store the system image. If not, you can use an external hard drive.

How to Create System Image on Windows 11

There are 2 applicable ways to create system image in Windows 11. The first way is to use the Windows built-in tool, and the other way is to use a professional system image backupper.

How To Create a System Image Backup And Do A System Restore In Windows 10

Way 1. Use the Backup and Restore Feature on Windows 11

If you want to create a Windows 11 system image on an external storage drive, please connect the drive to your system first and follow the steps below:

Step 1. Type control in the Search box at the magnifying glass and select Control Panel from the best match.

Tip: Alternatively, you can navigate to the Backup and Restore feature by opening Settings selecting System Storage Advanced storage settings Back-up options Backup and Restore.

Step 2. Click on Backup and Restore (Windows 7) in the Control Panel.

Step 3. Click on Create a system image from the left-hand pane.

Step 4. Select the backup location from the drop-down menu and click on Next to continue. Here you can select the connected external drive like a USB flash drive or external hard drive.

Step 5. Then a list of drives that you can back up will be shown. Untick the checkbox for the drives that you don’t want to store in and click on Next.

Step 6. Once you confirm that the storage drive can handle the size of the system image Windows 11, click on Start backup to execute the process. Then Windows will start saving the backup. This may take some time, so wait patiently. Once done, click on Close.

Tip: You can click on Yes to create a Windows 11 system repair disk if you don’t have Windows 11 bootable media. For that, you need to empty a USB flash drive.

Way 2. Use a Professional System Image Backup Tool

Windows built-in tool can help you back up and restore system freely, but it’s only good for some basic tasks. If you want to create a more advanced system image, you may need a specified backup utility like MiniTool ShadowMaker. It is a powerful backupper that can be used to create various types of system images including full, incremental, and differential backup.

Here you can use it to create system image Windows 11 easily and quickly. To know more detailed steps, you can read this guide.

create, system, image, windows

About The Author

Ariel has been working as a highly professional computer-relevant technology editor at MiniTool for many years. She has a strong passion for researching all knowledge related to the computer’s disk, partition, and Windows OS. Up till now, she has finished thousands of articles covering a broad range of topics and helped lots of users fix various problems. She focuses on the fields of disk management, OS backup, and PDF editing and provides her readers with insightful and informative content.

create, system, image, windows

Copyright © 2023 MiniTool Software Limited, All Rights Reserved.

Using Windows System Image Manager

The Windows System Image Manager (WSIM) is installed when you install the WAIK. You can access it by clicking Start → All Programs → Microsoft Windows AIK → Windows System Image Manager. You can use WSIM to create unattended Windows Setup answer files to automate the installation of Windows 7. Instead of a user answering the questions for an installation, the answer file can provide all the information. Additionally, you can modify the default behavior of the installation with an answer file.

WSIM comes in both x86 and x64 (32-bit and 64-bit) versions. It’s important to use the version that matches the image of your reference computer. For example, if you try to use the x64 version to create a catalog for an x86-based image, it will fail. However, you can use the x86 version to create catalogs for both x86- and x64-based images.

Exploring the Panes: An Overview of WSIM

When you first open WSIM, it has almost nothing in it. However, once you start creating an answer file, the different panes of WSIM start displaying some important information. Figure below shows WSIM with an image opened and an answer file started. In the figure, you can see the various panes of WSIM:

  • Distribution Share: A distribution share is a set of folders that contain files you can use to customize the Windows installation. This can be a local folder that includes items that will be installed after the installation, or a network share available to the system after the installation. Windows Setup will use the path defined here to install additional applications and drivers. When you create the distribution share, it creates the three folders shown in the Distribution Share pane.
  • Windows Image: The Windows Image pane shows the selected image and available components and packages that can be defined for the image. The figure shows an image named Windows 7 ULTIMATE added with the available components. As you can see, many components can be added. You can add components to the answer file by right-clicking them and selecting Add Setting. Different settings are added to different passes of the installation. You can add packages by right-clicking them and selecting Add To Answer File. Instead of selecting an image here, you can select a catalog file for the image if one exists.
  • Answer File: This pane shows the answer file as you’re building it. This pane starts empty, but as you add components and packages from the Windows Image section, it becomes populated. In the figure, only one component has been added: x86_Microsoft-Windows-Setup_ neutral. This has two sections: UserData (selected) and ProductKey.
  • Selected Components’ Properties and Settings: When you select a component in the Answer File pane, the available properties and settings for the component appear. You can then configure the settings as desired. For example, the AcceptEula setting has been configured with a value of True and an organization name has been added. Some properties have specific data types you can select (such as true or false) whereas other properties allow you to enter the data as free text.
  • Messages: The Messages pane includes different messages for you while working with an answer file. For example, if you select Tools → Validate Answer File, it will check for any issues. In the figure, the validation has identified that the ProductKey setting doesn’t have a value and the message indicates this will be not be added to the answer file.

Understanding Catalog Files

A catalog file (.clg) is a binary file that contains the state of all the components and packages within a Windows image. If you look back at Figure above, you’ll see that the Windows Image pane has been expanded to show the available components for the image, and one of the components has been added to the answer file. This list is derived from the catalog file.

An answer file with the available packages expanded. You can right-click any of the packages and select Add To Answer File. After adding the package, you can select package components, and configure their properties. and settings sections of the answer file.

The installation DVD includes separate catalog files for each image within the install.wim file in the sources folder. If you’re using a default image, you can simply copy one of these catalog files to your technician’s computer when you copy the install.wim file. Alternately, you can use WSIM to create a catalog file. WSIM queries the image and creates a list of the settings in the image to create the catalog. If you update the image, you need to re-create the catalog file. For example, if you use DISM to add or remove packages, the catalog file needs to be updated to reflect these changes.

When you open an image in WSIM, it looks for the catalog file for the image. If it can’t locate the catalog file, it will prompt to you create one. If you launched WSIM with administrative permissions, you can simply click Yes and it will create the catalog file.

  • When the WIM File Is Read-Only or in a Read-Only Location: The location includes the installation DVD. You need to copy the image file to your hard drive.
  • When You’re Trying to Create an x86 Catalog from an x86 Image on an x64 Technician’s Computer: If the WAIK is installed on an x86 technician’s computer, the x86 version of WSIM will run and you can use it to create both x86- and x64-based catalogs. The help file indicates that you can use the x86 WSIM to get around this problem, but it isn’t available if you installed the WAIK on an x64 computer.
  • When You’re Using It for a Nonsupported Version: For example, you cannot create a catalog file for Windows Vista RTM version.

Exploring the Components of an Answer File

You can look at sample unattended XML files if you’ve installed the WAIK. Several sample files are stored in the C:\Program Files\Windows AIK\Samples folder. You will need to add the UserData/ProductKey/Key information into the answer file or enter it manually during the installation. These files are architecture specific; in other words, some answer files are for x86- based systems and others for 64-bit systems. The section “Viewing Sample Answer Files” later in this article shows how you can open these files in WSIM.

Pass 1: windowsPE

Pass 1 includes many of the basic Windows preinstallation options as well as some basic setup options. The Setup section expanded to show many of the available options that can be added to the answer file. If you right-click over any of the items, the context menu appears.

In the figure, the ModifyPartition component is selected, and it shows that the setting can be added to Pass 1. Most items can be added to only a single pass, but some items can be added to different passes. For example, the ExtendOSPartition item available in the Windows Deployment section (not shown in the figure) can be added to Pass 3, 4, 5, or 7. The good news is that you don’t have to remember which passes are available for each item. WSIM only allows you to choose valid selections; invalid selections are dimmed.

Pass 2: offlineServicing

You can use the offlineServicing service to apply updates, drivers, or language packs to a Windows image. Any settings in the offlineServicing section of the answer file are applied after the Windows image is applied to the hard disk and before the computer reboots. This allows you to install and process any third-party device drivers you may need for special devices. There aren’t many components and settings available for this section of the answer file. For example, if you have drivers that need to be available before the image is applied, you can add the Microsoft-Windows-PnpCustomizationNonWinPE component. You can then add the path to device drivers to this component.

Pass 3: genera lize

You run the generalize pass only if you prepared your image with Sysprep. During this pass, the system-specific information (such as the SID and other hardware-specific settings) on the computer is removed. Even when the generalize pass is run, there aren’t many additional settings that are commonly added to this pass.

However, if you have any third-party drivers that are included in the image and you want them to be included in the final image, there is an important setting you must add. The PnpSysprep component being added. It is added to the Pass 3 generalize answer file section.

The PersistAllDeviceInstalls value can be changed from false to true to keep these third-party drivers. When you change the value to true, all the unique device drivers for a system are not removed from the installation image.

Pass 4: sp ecialize

This pass creates and applies computer-specific information. It runs after the first boot and creates the SID for the computer. You can configure a wide variety of settings during this pass, such as network settings, additional Windows features, and domain information.

The Internet Explorer settings are shown being added in the Windows Image components. The figure also shows some the settings available for Internet Explorer in the Answer File and Properties sections. The UnattendedJoin component, which allows you to specify details for joining a domain, has been added, along with the Windows-Defender component.

You can also configure network settings and international settings during this pass.

Pass 5: auditSystem

Pass 5 is used only when a system is configured to boot to Audit mode from Sysprep. The auditSystem pass can be modified to add additional configurations to an image, such as adding third-party drivers by an OEM, but you may not use it in an organization.

Pass 6: auditUser

Similar to Pass 5, the auditUser pass is used only if you boot into Audit mode after running Sysprep on a system. You can use this pass to run custom commands or configure Windows Shell options, but you may not use it for typical unattended installations.

Pass 7: oobeSystem

The last pass applies settings to Windows before the Windows Welcome phase begins. You can use this pass to modify Registry settings, create user accounts, and specify language and locale settings. It also includes many settings used by OEMs.

The Windows-Shell-Setup component includes several settings that you can add to modify the initial setup of Windows for your end users. Notice that the Windows-Shell-Setup section includes settings that can be added to all the passes except for Pass 1. You can also see that you have many different settings you can add in this section.

Creating an Unattended Answer File

The following steps show how to create an unattended answer file on a technician’s computer that can be used to boot a system into the Sysprep Audit mode without user invention. They require a copy of a WIM file on the computer’s hard drive. If desired, you can copy the install.wim file from the sources folder of the installation DVD onto the hard drive or copy an image that you have captured. You can also copy the associated CLG file so that WSIM doesn’t have to re-create it since this process can take quite a while.

Add ing an Ima ge to WSIM

The first step is to add an image to WSIM. These steps assume you have copied an image file onto your system‘s hard drive. The available components reflect what is available in the image.

  • Launch WSIM with administrative permissions by clicking Start → All Programs → Microsoft Windows AIK, right-clicking Windows System Image Manager, and selecting Run As Administrator.
  • Select File → Select Windows Image. Browse to the location of the WIM file you want to use. Select the file and click Open. If the file has multiple images, you’ll be given a choice. Select the desired image and click OK.
  • If you didn’t copy a catalog file with the image, you’ll see a prompt indicating that a catalog file isn’t available. A prompting you to create one, click Yes to create the catalog file. Remember that this process will fail if you’re running WSIM on a 64-bit computer but trying to create a catalog for an x86 image.
  • Select File → New Answer File. You’ll see the Windows Image pane become populated with components. You can add these components to your answer file.

At this point, you have the shell of your answer file, but it doesn’t have any content. Next you’ll learn how to add components to the answer file and configure settings.

Add ing Comp onents to the Answer File

Once you have created the shell of your answer file, you can begin to add components. The following steps lead you through the process of adding components for basic disk configuration and Windows Welcome settings:

  • Expand the Components section in the Windows Image pane of WSIM.
  • Browse to the Microsoft-Windows-Deployment\Reseal component. Right-click it and select Add Setting To Pass 7 oobeSystem.
  • Browse to the Microsoft-Windows-International-Core-WinPE\SetupUILanguage component. Right-click it and select Add Setting To Pass 1 windowsPE.
  • Use the following steps to add settings to create the first partition:
  • Browse to the Microsoft-Windows-Setup\DiskConfiguration\Disk\CreatePartitions\CreatePartition component. Right-click it and select Add Setting To Pass 1 windowsPE.
  • Browse to the Microsoft-Windows-Setup\DiskConfiguration\Disk\ModifyPartitions\ModifyPartition component. Right-click it and select Add Setting To Pass 1 windowsPE.
  • Use the following steps to add settings to create a second partition:
  • Browse to the Microsoft-Windows-Setup\DiskConfiguration\Disk\CreatePartitions\CreatePartition component. Right-click it and select Add Setting To Pass 1 windowsPE.
  • Browse to the Microsoft-Windows-Setup\DiskConfiguration\Disk\ModifyPartitions\ModifyPartition component. Right-click it and select Add Setting To Pass 1 windowsPE.
  • Browse to the Microsoft-Windows-Setup\ImageInstall\OSImage\InstallTo component. Right-click it and select Add Setting To Pass 1 windowsPE.
  • Browse to the Microsoft-Windows-Setup\UserData component. Right-click it and select Add Setting To Pass 1 windowsPE.
  • Browse to the Microsoft-Windows-Shell-Setup\OOBE component. Right-click it and select Add Setting To Pass 7 oobeSystem.

At this point, the minimal components are added to the answer file.

The next section shows how to configure the properties of the components that you have added to the answer file.

Configuring the Comp onents in the Answer File

  • If necessary, expand the 1 windowsPE section in the Answer File pane.
  • Select the Windows-International-Core component. Enter the following values in the settings section:

InputLocale: en-US SystemLocale: en-US UILanguage: en-US UserLocale: en-US
DiskID: 0 WillWipeDisk: true
Extend: false Order: 1 Size: 200 Type: Primary
Extend: true Order: 2 Size: Type: Primary
Active: true Format: NTFS Label: System Order: 1 PartitionID: 1
Active: false Format: NTFS Label: Windows Order: 2 PartitionID: 2
InstallToAvailablePartition: false WillShowUI: OnError
ForceShutdownNow: false Mode: Audit
HideEULAPage: true ProtectYourPC: 3

At this point, the answer file is configured. However, it’s possible that some of the settings were missed or misconfigured. You can validate the answer file before saving it to identify any possible problems. The following section shows these steps.

Testing and Saving the Answer File

You now have a basic answer file you can use to automate Windows Setup. If you copy it to a USB flash drive and boot to the installation DVD, the autoattend.xml file will automatically be used for the installation.

Viewing Samp le Answer Files

There are literally hundreds of settings that can be configured and there simply isn’t enough room in this article to cover them all. However, the WAIK does include some sample answer files that show more of the components and settings that may interest you.

  • Click File → Open Answer File.
  • Browse to C:\Program Files\Windows AIK\Samples.
  • Select one of the sample XML files such as autounattend_sample.xml or Corp_autounattend_sample.xml. Click Open.
  • You will be prompted to associate the answer file with the image within WSIM. Click Yes.
  • Expand the different elements to view them. Notice that the validation shows a problem with the key. If you double-click it, it will bring you right to the error. This sample doesn’t include a product key, but it does show you where you need to enter your product key.

If desired, you can open additional sample answer files and view their settings.

Windows System Image Manager: Premium Solutions

Windows System Image Manager (Windows SIM) is a graphical user interface (GUI) for creating and managing answer files in Windows. Answer files are.xml files that are used to set the basic Windows installation in Windows Setup, Sysprep, Deployment Image Servicing and Management (DISM), and other deployment tools.

The following are some of the perks of using Windows system image manager:

  • Quickly create an automated answer file.
  • Validate an answer file’s settings against a Windows image (.wim) file.
  • In a.wim file, you can see all of the adjustable component settings.
  • It’s simple to update a response file.
  • Make a configuration set containing all of the portable folders and Setup files you need.
  • To an answer file, add third-party drivers, programs, or other packages laptop rescue.

Typical Windows System Image Manager Settings

The sections that follow cover typical Windows 10 System Image Manager settings.

You can utilize Windows System to build an answer file that will be used during Windows Setup. You can add component settings to your answer file and determine when to apply them by adding them to a configuration pass.

Unattended answer files allow you to see and adjust component settings. So, if you are looking for a cost-effective and dependable Windows system image manager solution from professionals who care, give us a call.

You can add components, programs, and other changes to an existing response file using Windows SIM. It is possible for our specialists to check an existing response file’s setting against a specific Windows image.

An answer file is typically related with a certain Windows image. If you want to edit an existing response file, you can do it with Windows SIM. Windows SIM compares the component settings in the answer file to the parameters in the Windows image.

Our experts can add additional programs during Windows Setup with Windows System via a distribution share. Distribution shares store all programs, device drivers, scripts, and other resources provided by Windows Setup.

Offline updates, including as software updates, device drivers, language packs, and other Microsoft-provided packages, can be added to a Windows image via Windows System.

The tool that our experts use to apply packages to Windows, with or without an answer file, is Deployment Image Servicing and Management (DISM.exe).

What is the procedure for using our service?

From Windows system image management issues to frequent hardware problems, our professionals can handle a wide range of computer issues, including:

  • Failures and breakdowns of computers
  • Blue and Black Screen
  • Upgrades to software and hardware
  • Deletion of Files by mistake
  • Troubleshooting an Internet or email connection

What are the benefits of working with us?

First and foremost, we are dedicated to resolving the problem with your PC or Mac. Your PC or MAC will be fixed or diagnosed correctly or you won’t pay a penny, guaranteed!

But we won’t just solve your problem; we will show you how to prevent it from happening again. We will also explain everything to you in simple terms so you can understand it.

Contact us if you need reasonable and reliable Windows system image manager services from experienced experts.

Author

Kerariel

| Denial of responsibility | Contacts |RSS