Underwater vacuum cleaner for pool cleaning: how to connect to the filter
One of the most necessary extras that you should have on hand if you own an Intex pool is a pool vacuum cleaner. As much as we would like, but without timely cleaning, the pool gets dirty quickly. In this article we will tell you what kinds of vacuum cleaners there are, what models are better to buy for the pool Intex, as well as how to make a pump for the pool by yourself.
In our time on the market a wide range of different vacuum cleaners with different capabilities and their own features. And sometimes this abundance becomes a problem, because it is quite difficult to choose, but to rely on the fact that if the model is expensive and of high quality is not worth.
So in order to choose a quality, reliable and copes with its duties Intex vacuum cleaner, you should immediately pay attention to some points. First, find out how effectively, the selected model Intex cleans the pool walls and vertical surfaces. Modern unit should also clean vertical surfaces as well as the bottom itself. Second, find out how well the cleaner cleans the pool steps. It is often the case that the width or curvature of the surface makes it less effective at cleaning the steps.
These are the qualities of a professional vacuum cleaner for cleaning Intex.
Types and their capabilities Intex vacuum cleaners
Intex recommends using an Intex vacuum cleaner for your pool. These Intex vacuum cleaners are divided into three types:
Handheld for pool cleaning
Hand-held vacuum cleaner for pool cleaning. this is the easiest tool for cleaning pools and suits small frame and inflatable pools with a volume of up to 40 square meters.м. It can be used to clean not only small pools, but also large. But cleaning a large, deep pool with a handheld vacuum will take you a lot of time and effort. Underwater manual models from the manufacturer Intex come with a telescopic holder (made of aluminum) and 2 nozzles. The first is an Intex skimmer which picks up debris from the surface of the water. And the second is a nozzle-vacuum cleaner or, in other words, just a brush that removes dirt from the walls and the bottom.
The manual vacuum cleaner works very simply. The nozzle is attached with a hose to the faucet, which is responsible for the water supply and the jet washes away accumulated dirt. At this time, dirty water goes into the special compartment of the device, is cleaned and comes back. All garbage goes into the special basket, when this compartment is full, it is simply thrown away. In a nutshell, cleaning the pool with a handheld vacuum cleaner is like cleaning your apartment with an electric vacuum cleaner, only the underwater vacuum cleaner differs with a longer hose and a different shape of the holder. When cleaning the pool, all the electrical systems are on the surface.
How to clean the water in the pool with copper sulfate?
Here you can see approximate for filters for cleaning water in the pool.
In the video. children’s pools with a slide: https://2gazon.ru/voda/bassejny/detskiy-naduvnoj-s-gorkoj-dlya-dachi.html.
These Intex vacuum cleaners are a new stage in the development of vacuum cleaners. They are equipped with a brush, which has a more complex and efficient design, which increases the efficiency and performance of the cleaner as a whole. The semi-automatic vacuum cleaner allows you to adjust the water pressure. Such a function makes it possible to distribute the water pressure by sections, for example, for more polluted places to choose a more powerful water pressure.
The semi-automatic vacuum cleaner moves along the bottom automatically, held by suction cups, but it does so in a chaotic manner. In order to purify water, this model must be connected to a filter or skimmer. Some of the semi-automatic vacuum cleaner models are equipped with a storage bag. The vacuum cleaner works as follows, it selects areas randomly and after cleaning one area, it automatically begins to clean the next, and so on until the entire pool is cleaned. The speed of the device and quality can be regulated by the flushing valve.
This kind of cleaning equipment is also called a robot vacuum cleaner. These vacuum cleaners are best suited for large, deep and built-in pools. They are very effective and efficient, while requiring little or no human intervention. Therefore, cleaning with this type of vacuum cleaner is the least labor-intensive of all existing. Robot vacuum cleaners are not divided into underwater and above water, absolutely all elements of the vacuum cleaner, including electrical ones, are placed under the water. Automatic vacuum cleaners have a sensor system with which they detect dirty areas and automatically clean them, also in the vacuum cleaner is built filtration system, which cleans the water. The cleaning area is limited only by the cable length.
The body has built-in reusable filters, which are very easy to clean by hand, and after use many, many times. Automatic vacuum cleaners are absolutely safe, even in spite of the fact that all electric elements work under water. Instructions: the cleaner is connected to a transformer because it draws current with a reduced voltage. The transformer is included. If the pool is a regular shape, the vacuum cleaner will clean it automatically with the already built-in program. And if you have a non-standard shape, you can personally control the cleaning process with the remote control.
Top 10 vacuum cleaners for swimming pools
With the advent of the first cleaning equipment for water tanks, this niche market began to actively develop. Today, both in online stores and on the shelves of real retail outlets there is a huge range of this kind of units.
At the same time, the models have significant differences in appearance, power and design. To be easily navigated in a huge variety of pool cleaners, was compiled a kind of rating. It includes three types of devices: manual, semi-automatic and robot vacuum cleaners.
In compiling the top list we took into account the technical specifications of the models, their average price and customer feedback.
10th place. DOLPHIN WAVE 300 XL2
At the last place ranking put automatic vacuum cleaner for cleaning commercial and large residential pools DOLPHIN WAVE 300 XL. It perfectly copes with the cleaning of debris and dirt on the bottom and walls of the tank.
The model is quite popular among customers who have at their disposal pools from 25 to 60 m. Cleans the bottom, the walls of the pool, as well as the water line level.
This robot vacuum cleaner put in last place because of the very high cost. not every owner of a 25-meter pool can afford such equipment
- suction power. 40 m 3 / hr;
- cable length is 43 m;
- dual filtration system for maximum cleaning of pool water of small and large debris;
- operating cycle time. 1-8 hours;
- weight. 25 kg;
- remote control and a special cart are included.
The DOLPHIN WAVE 300 XL has excellent cleaning quality and performance. It has two active brushes and four side brushes so it can automatically reach all the hard to reach places without any effort on the part of the user.
A major drawback of the model is too high a price tag. In all other aspects, it is a good choice for large-sized pools.
9th place. Bestway 58304
The main feature of the model from Bestway is compatibility with virtually all filtration systems. Vacuum cleaner can work with devices showing capacity from 3.8 liters per hour.
A good solution was to build a pressure regulator and pre-filter into the unit. This makes the cleaning process faster, and also avoids clogging the hoses
The advantages of Bestway 58304 include:
- maneuverability. you will forever forget about the painful cleaning of sand and silt from the bottom of the pool;
- Versatility. the kit comes with many adapters to connect to all possible filtration systems;
- quality. for the production of the device was used durable plastic, it will withstand more than 3 years of active use;
- , at the same time, some suppliers sell it at a discount, so with some luck you can save about one and a half to two thousand.
Speaking of the disadvantages of the presented device, we should allocate a tangible weight (about 5 kg) and a rather short hose (6.1 meter). But if you buy it for a 5-meter pool, then these disadvantages are not so significant.
8th place. Bestway 58427
Cheapness, high performance and consistent quality. this is only a small fraction of the advantages of the Bestway 58427 cordless vacuum cleaner.
But for that money, you get a device that can make it easier to care for an inflatable pool/jacuzzi up to 6 meters in diameter.
This vacuum cleaner with built-in battery will cope with the cleaning of the bottom in frame and in inflatable pools, the diameter of which does not exceed 6 meters
- Handle easily with a 3 meter pole;
- fast battery charging. up to 50 minutes;
- convenience of operation;
- light weight. 2.1 kg.
No disadvantages as such. Yes, you could get caught up in the short length of the tube, but this is completely offset by the extremely low price.
7th place. Emaux CE306A SHOWA
When you own a fairly large pool, then pay attention to the Emaux CE306A SHOWA. This vacuum cleaner of semi-automatic type is suitable for both buried inside the bowls and for the tanks installed on the surface.
This semi-automatic vacuum cleaner is easy to use, just connect it with a hose to the skimmer. It will help keep the bottom of the pool clean
The unit, like all other semi-automatic machines, connects to a garden hose. To remove contaminants, it makes a vibrating movement. Easy cleaning is guaranteed by the corrugated hose. It has high maneuverability.
The Emaux CE306A SHOWA is virtually silent. But the convenience comes at a price. After all, the price tag on the semi-automatic vacuum cleaner stopped at 13,500.
6th place. Zodiac Vortex 4 4WD
If you want to quickly and easily clean any size pool, the Zodiac Vortex 4 4WD (RV 5500) is a good solution. But this is a really expensive device, the cost of which is quite high.
High-tech assistant. robot vacuum cleaner Zodiac Vortex 4 4WD is able to take on the duties of cleaning the pool. Its weight and dimensions are not a problem. a convenient cart for transporting the machine to the place of work is included
What kind of vacuum cleaner is better for the pool??
When choosing the right cleaning equipment for the pond, first of all you need to pay attention to the type and design of the device.
Today manufacturers offer manual, semi-automatic, as well as automatic vacuum cleaners. Each type has a number of significant differences and advantages. But in order to finally decide on the purchase, you need to thoroughly familiarize yourself with each type, considering its disadvantages.
nimble and simple manual models
Hand-held vacuum cleaners for swimming pools differ in the elementary design and ease of maintenance. They are designed for the care of inflatable and frame tanks, the volume of which does not exceed 40 cubic meters.
You should not choose this kind of unit for medium or large tanks. They take too long to clean.
Typically, a manual vacuum cleaner package includes a pair of nozzles and aluminum rod. You can use the skimmer (suction net) to pick up debris from the water surface. The vacuuming nozzle is suitable for cleaning the bottom, and with the help of a brush you can wash the steps, walls and bottom of the pool
The principle of operation of manual models is incredibly simple. You just have to connect the machine to the garden hose to get started. When the water supply is open, all the dirt will be lifted from the bottom of the pool and pulled through the filter into a special bag.
The two nozzles in this type of vacuum cleaner are attached to the aluminum bar. As a rule, the handle is made of lightweight material. So even a fragile girl can cope with cleaning your favorite vacation spot.
The disadvantages of manual vacuum cleaners should include:
- The need for a filtration system;
- Most models do not have a bag or filter to catch debris;
- Cannot be used to clean large or medium sized pools.
As for the advantages, manual vacuum cleaners are cheap. In online stores, you can find a device for as little as one and a half thousand. This makes it affordable for customers of all income levels.
Semi-automatic cleaning units
Semi-automatic vacuum cleaners are considered more modern and productive. Their distinctive feature is that the user can change the water flow rate at will.
Semi-automatic vacuum cleaners have a more sophisticated cleaning brush. They can clean the tank without any problem and in a short period of time. At the same time, it is really convenient to clean
The category of cleaning equipment presented above is an intermediate stage between manual and automatic vacuum cleaners.
Semi-automatic cleaners also have a simple principle of operation. With the help of a special membrane they are sucked to the walls or the bottom of the bowl and absorb all debris. After that, the unit is moved to another location.
Devices of this type are perfectly suited for prefabricated, frame and stationary structures. They can also be used to clean inflatable pools.
Some models are equipped with a special bag for dirt. But in most cases, the vacuum cleaner will need to be connected to a skimmer. You do not need any additional tools for this. Everything is as quick and convenient as possible.
The obvious disadvantages of semi-automatic cleaners are the following:
- Limited life span. Most models wear out after three years.
- Long cleaning times. An average pool with such a vacuum cleaner will have to clean about 2 hours, and even more.
- Limitations due to pump capacity. Many semi-automatics can only be operated from a unit with a capacity of over 0.75 kW.
As for the advantages, this type of device is completely independent of the electric network. Which makes them ideal for the country house. They are suitable for all existing types of pools.
These modern and advanced robot vacuums
Robot vacuum cleaners are fully automatic devices. These are innovative units, which will be the best choice for large pools of stationary type. In this case, they do everything on their own, with minimal involvement of the owner.
If you compare a robot vacuum cleaner with other types of cleaning equipment, in contrast to analogues, it is fully immersed in the water along with the electrical components. This allows it to reach even the most remote corners of the pond and clean them
No need to fear that if moisture gets inside the vacuum cleaner, you can get an electric shock. Manufacturers have provided for this and ensured a sufficient level of safety. The transformer converts the electric current from the mains and makes it completely safe for humans.
The main advantage of robots is their independence from the skimmer or pond filtration system. This design feature allows them to move freely along the bottom of the pool, collecting all small and medium debris.
The device is equipped with a filter to collect dirt. Do not forget to clean it upon completion of cleaning.
Many models of automatic pool vacuum cleaners operate in two modes: by remote control and independently. In the first case, the owner controls the device. This will be useful if the bowl has an unusual shape with complex topography of the bottom
In the independent mode, the diver’s work is based on the algorithm, laid in its memory. It goes around the bottom looking for debris. In some cases, if provided by the manufacturer, the vacuum cleaner can drive up the walls and steps for their subsequent cleaning.
Automatic pool cleaner has these disadvantages:
Types and Description of Bottom Pumps
Operating principle of the vacuum cleaner: as it moves along the surface, the brush scrapes the debris particles, which are sucked with the water, through the hose goes into the filter. Debris settles in it, purified water goes back into the pool.
There are three types of underwater vacuum cleaners:
Their design is simple and they are used in small pools. inflatable and frame up to 40 m2. In turn come in two types:
- With filter connection. hose from brush goes to pool filter. Debris stays in the filter, water is sucked back in.
- No connection to the filter. the hose goes to the tap with water. Under the pressure of water, the debris at the bottom is agitated and sucked into a special bag. After which the dirty water passes through a filter and into the pool.
Let’s look at popular Bestway hand vacuum cleaner models.
- Package dimensions 50x21x21 cm.
- Weight 1.5 kg.
- Price 2 700
- It comes with 3 adapters.
- 2 rotary nozzles, one with a brush.
- Vacuum hose 6 m long.
- Boom 4-section aluminum 2.24 m long.
- Pump capacity 2 000 liters per hour.
- Recommended pool size 4.57 m.
Connects to the pool filter or skimmer. Water with debris and sludge from the bottom and walls is sucked up by a pump and pushed through the filter and returned clean to the pool. Filter must be cleaned constantly.
- built-in rechargeable Ni-MH battery;
- operating time 50 minutes (for one recharge via USB cable)
- for pools up to 6.1 m in diameter and 3 m deep;
- Length of telescopic handle 3 m;
- Two suction nozzles;
- 3 m hose length;
- weight 2,1 kg
- price 5000-5200
Two types of vacuum cleaners are available. with filter connection or with dust bag. Compared to manual, frame, hydraulics added.
Average speed of about six meters per minute. Water flow speed is controlled automatically (by a built-in special valve) which creates additional suction power. The brush has a more complicated design. vacuum draws it to the surface of the walls or the bottom.
- are simple enough,
- does not require permanent human presence,
- the water flow rate can be adjusted,
- Can be connected directly to the skimmer.
Description (not intended for large bowls):
- Hose length 8,2m.
- Suction capacity 5.6 m3/hour.
- Membrane suction system.
- For basins up to 6 m in diameter.
- Cleans bottom, walls (manually).
- You need a pump or filter with capacity of 6-7 m3/hour.
- Weight 5.85 kg.
- Price 8 300
Operation: connect one end of the hose to the filtration pump, the other end to one of the nozzles. After turning on the pump, the brush will slowly move along the bottom. Dirty water moves through the membrane to the pump and clean water moves into the pool.
BESTWAY FLOWCLEAR 58237 pool cleaning Equipment Pool Vaccum and Skimmer
Thanks to the membrane it is almost silent. Diaphragm changes in two movements. turn and click.
Automatic robot vacuum cleaners
These are fully autonomous models, capable of uninterrupted underwater work (up to 8 hours). They are not connected to the pool filters, they have autoprograms. their electrical part. under water. But they’re considered completely safe.
Two control modes. one completely independent, the other via remote control. This makes them especially convenient for cleaning large areas.
The pluses for them are considered to be the presence of:
- reduced weight. so it’s easy to submerge and retrieve;
- wide wheels. to move on the walls, too;
- a swivel cord so that the cable does not get tangled in the case of a looping path;
- Adjustable timer. to set the time of activation;
- sensors with deflector functions. so they don’t get stuck in the corner.
- Independence from the skimmer or filter,
- treatment of bowls of any volume,
- Complete independence from human presence,
- high performance,
- small dimensions.
Bestway has only one robot automatic:
- Cordless, rechargeable.
- 1.5 hours in operation (with a five-hour charge of the lithium-ion battery).
- Processing area. 45 sq. m.м. bottom.
- Transfer speed of 1 km/h.
- 4.5 liter garbage bag capacity.
- Weight 6.5 kg.
- Price from 22 000
How to connect and use?
It is important to monitor the cleanliness of the filter, constantly rinse it.
How to properly?
To connect the vacuum cleaner to a filter, you need to follow a few sequential steps:
The device can also be connected to a nozzle.
Pool cleaner requires no permanent human presence. It is enough to set it to a certain mode of operation so that it independently cleans the pond of impurities.
In order for the automatic vacuum cleaner to do its job, the user needs:
Like any electric appliance, an automatic vacuum cleaner needs care. Maintenance is simple: you only have to clean the filters and change the brushes when they are worn out.
Intex auto pool cleaner
Is there a difference in the connection of different types of filters?
There is no fundamental difference in the connection of installations to different filters. You don’t connect to the filter itself, but to a skimmer or nozzle.
Connection to the nozzle is possible both directly and through special adapters. Connection to the skimmer is made through a vacuum adapter.
Wireless robot for pool cleaning Caiman NEMH2O
Here we get to our robot. Caiman NEMH2O (or Caiman Nemo). Working principle is the same as wired robots cleaners. crawls around the bottom and walls, picks up coarse debris built-in filter, disperses stagnant areas, does not allow the formation of plaque on the bottom and walls of the pool.
Caiman NEMH2O wireless robot for pool cleaning
The main difference from both wired robots and automatic vacuum cleaners is its complete autonomy. Mode of use. “start and forget”. No hoses or wires, no need to keep an eye on it and you can be in the water during its operation.
Caiman NemH2O robot contactless induction charging
Can work in any size pool, but not appropriate for small prefabricated pools.
Total: Type: robot for pool cleaning Tasks: to clean deposits from the bottom and walls, remove stagnant water Performance: sand on the bottom, a small amount of sediment Pool size: all, including sports Pool Mode of use: run once in the pool and configure, then works automatically Human involvement in the work: for indoor pools. the operator is required for the outdoor. cleaning coarse filter as filling The filter system: its own coarse filter, for a fine cleaning system is responsible own pool water treatment Features: can
If you do not have the desire or the appropriate skills to make a vacuum cleaner with your own hands, you can easily buy it in the store. In this section we have prepared models which are the most popular in use for Intex pools. So, these models:
This is a semi-automatic vacuum model, which effectively cleans the bottom of the pool. It is used only if there are ground tanks. The advantage of the model is that you do not need to control its work or walk around with a brush around the pool. When it comes in contact with the pool deck, the unit automatically reverses its direction. When using this equipment for high efficiency and performance, you need to use a pump with a capacity of not less than 6 cc. m/hour. Use as described above, the equipment is very simple as it works autonomously.
It is a manual vacuum cleaner and very practical. Intex 58947 is a whole set, which includes a brush, a suction net, a hose, a rod (length 2.8 mm). All elements are very fast to assemble and operate quite effectively. With a net all the debris is collected very quickly, but to clean the walls and the bottom you have to work. To operate the unit is simple enough, just like an ordinary apartment vacuum cleaner.
Price of vacuum cleaner. from 3830 p.
This material will introduce you to other types of pool vacuum cleaners.
There are dozens of brands of underwater cleaners for pools on the market. Some of them have managed to become particularly popular, offering a variety of models designed for buyers with different budgets.
Large selection offers a manufacturer of pool products Intex. In its line presents primarily semi-automatic devices. Under the brand Bestway, which appeared in France, both inexpensive and modern automatic devices are sold. One of the Korean brands Emaux is also popular. The Aquabot is made in the USA and is a reliable and modern underwater vacuum cleaner that is durable, practical and well worth the cost.
Those who are interested in an inexpensive hand vacuum cleaner for the pool, go for the brand Intex. Models differ in the length of the boom and hose, as well as the number of additional attachments. The main advantages. a reasonable price, quality, ease of use.
Underwater vacuum cleaner. is a useful device, because dirt accumulates in the water. And this happens much faster than in the house or yard.
Dirt and debris not only settles to the bottom as an even layer, but also forms the optimal environment for the development and spreading of fungi and bacteria of pathogenic type. And it applies to both inflatable pools and stationary.
Not only at the bottom such a layer is formed, but also on the line between the water and the air (waterline). If heavier objects sink down, then lighter substances remain on top. There is less dirt on the walls.
Clean pools with a squeegee is difficult and slow. In addition, for portable and inflatable versions the method is not suitable. It is not always possible to clean the tiles in this way, especially the gaps between the parts.
With pool vacuum cleaners can effectively clean not only the bottom, but also the walls and water surface. Such a device is characterized by ease of use. It will save money (including the fact that you do not have to hire a crew for cleaning the pool).
Another advantage is that the device can handle even the most hard-to-reach places (corners, steps, various protrusions and decorative details).
Vacuum cleaners for swimming pools are multifunctional. They are easy to use, so you don’t need the help of a specialist. The basic principle of the device is that the equipment absorbs dirty water and runs it through a special filter. After that the cleaned liquid flows back into the pool.
As for handheld devices, things are a little different there. First they need to be assembled. One end of the hose is connected to the brush and the other end to the skipper. Next, all that remains is to turn on the pump for filtration and lower the brush with a hose into the water.
Underwater vacuum cleaner for the pool is well suited for cleaning the bottom, walls, steps. It gently cleans surfaces without causing damage. This prolongs the life span of the pool.
How the pool cleaner works
Conventionally water devices for pool cleaning can be divided into two types, manual and automatic. They work according to the same algorithm, although the features are different.
How does the manual vacuum cleaner for the pool work?
The manual pool cleaner consists of an electric motor, a long telescopic arm and a hose. You attach the device to the skimmer via an adapter and dip the brush in the water. The principle of operation of the manual pool vacuum cleaner is that contaminated liquid passes through a tube into the main unit where it is cleaned by filters, and then poured back into the tank.
The manual water vacuum cleaner can be equipped with nozzles and brushes just like a regular vacuum cleaner
The user handles the bottom and walls manually with a vacuum brush. The latter is securely sucked to the surface of the tank and provides quality removal of dirt, which together with water also enters the unit and is retained in the filtration system.
Important! Although a manual vacuum cleaner greatly facilitates cleaning, the procedure still requires personal time and attention. By itself the unit can not collect debris.
How does a robot vacuum cleaner for the pool work
Unlike a handheld unit, the robot is fully autonomous. As a rule, such models do not provide a long tube with a telescopic design. The unit consists of a housing with one or more brushes for cleaning, complete with wheels or crawlers to move along the bottom.
Robots are available for large vessels which cannot be cleaned using a manual cleaning device
Vacuum cleaner does not need to be connected even to the skimmer, you just plug it into the outlet, because the work takes place on electricity. After that, the device is lowered into the water, and it independently cleans the bottom. Many models are also able to move on the walls. To intervene in the automatic operation of the user can use the remote control to turn off the machine or set him a certain mode.
How to use the pool vacuum cleaner correctly
Both manual and automatic models require minimal user involvement in the cleaning process. To clean quickly and efficiently, you should read the instructions.
How to clean and vacuum the bottom of the pool with a manual vacuum cleaner
While a vacuum cleaner allows you to clean, including the walls, it is best to manually walk over the walls with a brush before turning the unit on. Then the water is left undisturbed for a couple of hours.
Tip! It is advisable to check the condition of the filters in the pump and clean them, if necessary, before starting the job.
When the dirt is removed from the walls of the frame tank, will fully settle, you can begin cleaning the pool with a vacuum cleaner. Carry out the procedure as follows:
- put the cleaning nozzle on the tube of the device, secure the hose and adjust the length of the handle;
- The brush is lowered to the bottom of the pool, not quickly, but gradually, so that all the air came out of the hose;
- Connect the vacuum cleaner to the skimmer and turn on the pump;
- with gentle, slow movements, drag the nozzle along the bottom, picking up coarse and fine dirt.
To properly clean your pool with a regular hand-held vacuum cleaner, take your time during the process. The water unit works best at low speed, with sharp movements the dirt will only rise from the bottom, and you will have to wait again until it settles.
Vacuum cleaning nozzle must be pressed firmly to the bottom during cleaning
Cleaning the pool with a robot vacuum cleaner
An automated robot vacuum cleaner makes it easy for the user and minimizes your involvement in cleaning. Instructions for use of the unit looks like this:
- submerge the cleaner completely in the water, being careful not to disturb it;
- Leave the unit off for a short time to allow the dirt that has been lifted from the bottom to settle a little;
- Connect the cleaner to the wall outlet through the grounded outlet;
- start the device via the remote control;
- Choose an automatic program of the desired duration.
According to a given trajectory, the robot vacuum cleaner will begin to move along the bottom, collecting dirt and simultaneously filtering the water. Upon reaching the edge of the pool, the device will either change direction or begin to clean the walls, if the model has such a function. At any stage of work the user can adjust the path of the vacuum cleaner and other settings via remote control.
The robot vacuum cleaner should be turned on after it has been lowered into the water
Some models of robots with sensors independently determine the size of the tank, the type of liquid and the degree of contamination. To work, you just need to put them in the water and turn them on, all the rest the device will do on its own. After the robot finishes cleaning the tank, you need to unplug it from the network and remove it to the surface.
Without a Bestway filter pump you can not make your pool clean, you just need to change the filter insert every two weeks. The device is easy to connect and maintain yourself, it is important only to follow the rules stated in the manual.
- Low price. Filter unit’s main cleaning element is the paper cartridge,
- Easy to care for and maintain. Maintenance is simply a matter of rinsing the membranes with a jet of water. You can change the cartridge yourself.
- Heavy Duty Resistance. The unit can run more than 9 cc through the cleaning element. water.
- Low weight. All Bestway cartridge filters have small dimensions, which allows you to move the pool from one part of the site to another.
Disadvantages: frequent replacement of the cleaning element (paper cartridge). This is the only disadvantage of these filter units from Bestway.
Replacement, with frequent use of the pool, is required every 2-3 months. Manufacturer sets cartridge life at 1 year.
Comparison with devices from Intex
Comparison of technical characteristics of Bestway and Intex cartridge filter units:
|Power||From 4 m3/h to 10 m3/h||From 2 m3/h to 9,5 m3/h|
|Cartridge life||4 months to 1 year||2 months to 1 year|
|How many cartridges to use during the summer||From 4 to 8 pcs||2 to 6 units|
|Cost of the cleaning element||300 to 500||From 400 to 700|
|Maximum and minimum filter unit volume||From 1,500 to 40,000 liters||From 1 000 to 50 000 liters|
|Electrical power consumption (depends on the specific model)||From 25 to 30 Watts||30 to 40 watts|
|Enclosure materials||Plastic||Polymer/Plastic/Polyester reinforced|
|Working pressure (maximum)||3.5 bar||3.4 to 3.5 bar|
When choosing a filter-pump, it is important to consider the volume of the pool itself and the frequency of its use. You should also pay attention to how much water the device can clean for 1 hour of work.