Management of a robot-blade from a smartphone
Automatic vacuum cleaners-robots gain popularity among users, improve and become more convenient. So, the usual models were replaced by devices controlled from smartphones. This provides maximum cleaning comfort, as you can launch the robot even while at work. By the arrival of the house, the territory will be removed, and the small assistant will habitually stand on charging.
When purchasing a new assistant in the apartment, make sure that he is synchronized with a smartphone or other gadgets. This will give a number of advantages to the owner of the household appliance. In particular:
- Control the work of the “cleaner” from any place in the house or outside.
- Gain access to personal data of equipment at any time.
- Monitor the level of battery charge.
- View the technical characteristics of the device and evaluate the degree of wear of replaced parts.
The choice among robots with the possibility of synchronization is huge. Make sure yours are also included in this list.
How to choose and download application
The link to download the application for both Android and iOS-scartphones can be obtained from the instructions for the robot-percant. As a rule, there is a QR code there. It is enough to bring the smartphone camera on it, confirm the transition to the application store, and then select “Install”.
Also, the link can be obtained on the official website of the manufacturer by entering the exact model of the robot-blanket into the search line.
At the first launch of the application, a permit for access to internal memory will be requested (to record settings), as well as for user locations (some models use GPS coordinates as a basic landmark).
It is also sometimes necessary to create a personal account on the manufacturer’s website, this will control the equipment even without connecting to a home Wi-Fi network.

Synchronization with the phone
The procedure for connecting the device to the phone is not much different among different manufacturers. For Android and iOS phones, the sequence of actions is also the same. Buyers are often interested in how to set up a robot vacuum cleaner through the application. Consider the general synchronization algorithm.
Procedure
First you need to turn on the vacuum cleaner, make sure of the stability of the network signal. On the body of the device should burn the light indicator Wi-Fi.

Then sequentially perform the necessary steps:
- Download application for iOS in AppStore, for Android. in Play Market.
- Run the program, open access to all options.
- Register an account or log in to the existing.
- Find out for which country the device is produced, based on this, indicate the territory of the connection. If the inscription on the packaging in Russian. choose, in English. any country of Europe, hieroglyphs are printed on the box. mark China.
- On the main page of the application, click the icon “” or “make a device”. After that, find the desired model in the list that opens (until the end of the binding to the phone, the device distributes Wi-Fi as a router).
- Click on the desired name. After a new window opens, reset the network settings on the robot with a long press simultaneously the Start and Home buttons (the exact combination is indicated in the operating manual).
- Click in the application “Next”, select a home Wi-Fi network from the list of opened, configure access.
- Return to the application.
The label of the device will be fixed on the main screen. Through a mobile program, you can completely control the device. With the help of an intuitively understandable integration, it is easy to figure out how to configure the cleaning time of the robot permissor, start and stop it, choose the intensity of water supply to the napkin.
Features of connection
When synchronization with the iPhone, sometimes a problem arises: the smartphone refuses to recognize the robotic device, despite the multiple reloading of the device and network connection.
Attention! In this case, it is necessary to change the country selected in the account to India or China.
The action is carried out in the profile settings, in the “Region” tab. Consider this feature, and you will not have the question of how to connect a robot permissor to the iPhone via Wi-Fi.
Another common complexity is the inaccessibility of servers through which the connection is performed. The problem is solved by repeated attempts to synchronize after a few hours or the next day.

Before the first launch of the device, its connection and tuning, we recommend that you carefully study the user guide. It indicates the rules of operation and technical issues regarding the acquired model, as well as information on how to set up a robot vacuum cleaner into Russian.
iRobot Roomba i3 (3150) Wi-Fi Connected Robot Vacuum Review
How to connect a Xiaomi vacuum cleaner to the phone (Mi Home)
Congratulations on the purchase of a Xiaomi robot. Below you will learn how to connect the Xiaomi vacuum cleaner to Wi-Fi through the application on Android or iPhone. And at the end of the page, the download files: synchronization of the vacuum cleaner with the application and instructions for robots-blankets (by clicking on the link, select your model).
Connection
To connect the Xiaomi vacuum cleaner to the iPhone or Android, you will need Mi Home app. With which from your smartphone through a Wi-Fi network you will be able to control a smart vacuum cleaner. Links for downloading from official resources (open in a new tab):
Apple, iOS 9.0 or later version. | Android, version 4.3 and above |
link to App Store, ~ 467 Megabyt | link to Google Play, ~ 88 megabytes |
We advise you to download through Wi-Fi, files weigh a lot, especially for iPhone and iPad.
Smartphone connect to Wi-Fi network at frequency 2.4 GHz. Go to the Mi Home app, get back or register (if for the first time). Click on plusik in the upper right corner “.
Before connecting the robot vacuum cleaner Xiaomi Mi Home, make sure that it is charged, t.to. At the first inclusion, it may be updated.
Now turn on Bluetooth, and look for the busting nearby. If for some reason it was not possible to automatically find the device, then you can do it manually. In the “Household Appliances” tab, select your model. If it is not on the list, then change your region to “China”.
Next, ask for a reset of the reset, for this, click 2 of 2 buttons or 2 extreme out of 3, depending on the model; Wait for a voice signal in Chinese or Angerian. Everything, wi-fi huts are dropped.
НАСТРОЙКА И ПОДКЛЮЧЕНИЕ К ДОМАШНЕЙ СЕТИ WI-FI РОБОТ-ПЫЛЕСОСА XIAOMI MI ROBOT VACUUM-MOP ESSENTIAL!
Choose your Wi-Fi network in the next tab, excellent. Then synchronization and renewal of a smart vacuum cleaner will be completed. Well, then the settings to taste.
Functional
On the main screen of the application, the center is displayed in the center, drawn up by a blanket and its current place of position. In the upper part, the name of the vacuum cleaner and the current cleaning mode.
Information about the distance traveled, temporary cleaning range, battery charge level at the bottom of the screen.There you can start or stop cleaning.
- Button “go”. send the robot to a specific place for unscheduled cleaning.
- Button “DOK-station”-send to the dock for charging.
- The “Clean” button launches sequential cleaning.
- Button “zoned cleaning”. select a specific objective area of the room that needs to be removed.
There are three points in the upper right corner, they open additional settings.
Additional settings
- “Timer”. set the time interval in the range of which you can clean automatically.
- “Voice and volume”. a change in voice bags and volume of voice notifications.
- “Cleaning mode”-choose the intensity of the cleaning of the room: quiet, turbo, balanced and turbo mode.
- “History of cleaning”. recording information about cleaning. Removen area, beginning and end of cleaning time.
- “Remote control”. manual control, if necessary or have fun.
- “Card conservation mode” Adding virtual walls.
- “Carpet mode” specifically for improved carpet cleaning.
- “DND mode (do not disturb)” in the period you have chosen, the vacuum cleaner will not complete the cleaning and issue voice notifications.
Now you know how to connect a Xiaomi vacuum cleaner and all its functions.
Good to know
- Can be controlled with the help of the voice assistant “Alice”.
- If it is not possible to connect the Xiaomi vacuum cleaner to Wi-Fi, the document describes the tips below how to solve this problem.
How to connect the Xiaomi robot vertebrae via Mi Home
The work begins by downloading the application through the App Store or Play Market. After that, the following actions are performed.
Charging devices. Before connecting the Xiaomi robot to Wi-Fi, you need to make sure that the smartphone is connected to a network with a frequency of 2.4 GHz. Launch the Mi Home program. Press on the plus icon in the upper part of the screen.
The device offers to enable Bluetooth. After that, it will be possible to find the gadgets located nearby. For synchronization, press on the vacuum cleaner icon.
If the system does not recognize the device automatically or automatic search is inactive, you can add a vacuum cleaner manually. To do this, use the “Add” button. In the list of devices, they choose the right.
Before connecting the Xiaomi robot vertebrae to the phone, the settings of the vacuum cleaner are dumped. To do this, hold 2 keys on the device case and wait for the sound signal.
Choose which network to connect the Xiaomi G1 robot vertebrae. Indicate Wi-Fi to which the smartphone is already connected. After that, synchronization and updating of the device begins.
Choose the location of the vacuum cleaner. In the future, it can be changed through the settings section.
Set the name of the device. It is advisable to write it on Cyrillic.
Add accounts for joint use.
Instructions for connecting a robot permissor to Wi Fai
Keep in mind that for the correct operation of the Internet networks it is necessary that the phone corresponds to certain technical characteristics. Its functionality has the ability to connect to Wi-Fi, as well as Bluetooth and GPS. All of them must be activated.
Select a suitable Wi-Fi network on a smartphone and connect it by entering a login and password.
Next, you need to download the Mi Home application, with which the vacuum cleaner is synchronized with a smartphone or tablet, and will also work from the Wi-Fi network. Register in the application and find a model of a vacuum cleaner that you have.
When synchronizing, the robot should be turned on. We look for a device model in the application and click on the picture. Further, the system will do everything for you by finding the device and connecting it to the common networks. At the end of the process, it will be necessary to enter the login and password again, as well as confirm your actions.
If Connect is not installed, experts recommend that a complete reboot of the household device.
The correct work of the program and high.quality “docking” ends with the appearance of a picture with a vacuum cleaner. In the future, it requires its installation, setting up routes and a cleaning schedule.
If the offline robot is not possible to connect it to the available network, try changing the VPN settings or the DNS address in Wi-Fi settings. Do not climb into it if you have never done like. Better to contact a specialist.
In the case when the first Connect went normally, and then disconnecting from the network occurred and the vacuum cleaner does not connect again, try to carry out a complete reboot. over, you need to turn off not only the robot, but also the router distributing the network.
The manufacturer’s instructions, as a rule, have a step-by-step guide in which the steps of connection to Internet networks are described in detail.
What to do if you can’t connect the Xiaomi robot vertebrae to the smartphone.
In this case, we try to repeat the connection. Most likely, when connecting the robot permissor, an error occurred to the network, which prevents the connection. In this case, restart the application and re.connect.
The wi-fi settings of the Robot P canvelight will also help. To do this, press the power button and the “Home” button and wait for the seconds for 5-10 until the vacuum cleaner will make a sound signal. After that, connect the robot vacuum cleaner.
If these options did not help, then we are dumping the system of the robot-permollis. To do this, clamp the “Reset” button under the vacuum cleaner cover and wait until the vacuum cleaner will make a sound signal.
Additional functions of the robot-blanket, voice control
The device is equipped with a dust sensor that warns of a high concentration of allergens and pollution, as well as a fall sensor that helps the robot bypass obstacles.
There is a navigation display on the smart vacuum cleaner case, which displays information about the battery charge, the condition of the device and the current launched mode.
Voice control allows you to control the robot through the Mi Home application.
You can set the cleaning timer, create a cleaning route and even determine which area of the floor to wash.
In addition to cleaning, a smart vacuum cleaner can also be used as a vacuum cleaner to collect water and other liquids. If you insert the charger into the outlet, using the liquid recognition function, the device will track the water level in the room and inform you about the need to replenish the tank in time.
When the “disposal” mode is turned on, the robot automatically cleans the reservoir of garbage and sends it to the docking station for charging. In addition, this will help protect the vacuum cleaner from excessive overheating.
In this mode, the device will independently clean the compartment every 30 minutes. If the reservoir is empty, the robot vacuum cleaner automatically returns to the dock and connects to the charger.
With the help of an ultrasound sensor and the obstacle recognition system, you can be sure that your robot vacuum cleaner will not crash into an obstacle, for example, a glass door or a high threshold.
After cleaning, he will definitely return to the dock, as all points of his return are preserved in the device’s memory.
How to reset the settings if the Xiaomi robot vertebrae does not see the network
Sometimes the parameters of the device are confused, due to which synchronization with the phone becomes impossible. You need to try to restart the vacuum cleaner using the Reset button. If this does not help, the settings are reset to the factory:
- Set the reset and home keys at the same time. The reboot button can be clamped with a knitting needle, toothpick or any other thin object.
- Release the Reset button. Home key is still held.
- Wait for the LED indicator.
- After giving the sound signal, they try to synchronize the vacuum cleaner with the application. In the settings of the region, you need to indicate “China”.
After performing this procedure, the Xiaomi Robot Delivery begins to work as usual, and the error “The device is not on the network” disappears.