Article on : How to clean the drain filter in the washing machine
The washing machine, as well as any other household appliance, requires care and maintenance, if this is not done, then the active use of the household appliance will quickly become unserviceable.
In a washing machine there is a part that requires constant maintenance is the drain filter. It is it that needs quality and periodic cleaning of contaminants. It is necessary if you want the washing machine drain pump to function properly.
Drainage filter is a kind of barrier that protects the drain pump from getting into it various foreign objects, that the laundry can get into the washing tank, debris, remnants of fabric, and the like. When the filter is very dirty, it makes it difficult to pump out the water and may soon lead to a breakdown of the drain pump.
Continuing the rubric of useful articles on household appliances, we have prepared for you another article-instruction how to properly clean the drain filter of the washing machine. In this article, we will describe the most basic problems that you may encounter when cleaning the filter.
Drain filter in different washing machines.
How to clean the filter on an Indesit washing machine
It is clear that everyone at home are different washing machines, and it is clear that the location of the necessary node in each machine is different. In this section, we will tell you where the drain filter in washing machines of different manufacturers is located. Although washing machines are different, but all manufacturers drain filter installed at the bottom of the appliance, near the drain pump. The filter is an internal part of the washing machine, so its manufacturers close a special hatch or panel that is removed.
In order to make it easier for you to understand, we have made a kind of illustration, which clearly shows the location of the drain filter in different washing machines.
LG washing machine filter is located at the bottom on the right side, closed by a hatch.
Pump cover (filter) compatible with Indesit C00045027
Pump cover (filter) Electrolux 50290260004 Original
Washing machine Indesit and Ariston filter at the bottom on the right side, closed by a removable protective panel.
Washing machine Candy. The filter is on the bottom left hand side, closed with a hatch.
Bosch and Siemens washing machines the filter is on the right side, can be closed with a plastic cover or panel.
Samsung washing machines the filter is near the bottom corner on the right side, covered with a plastic panel or hatch.
Washing machines that have a vertical load, such as Whirlpool, the filter is at the bottom of the machine on the left side.
Atlant washing machines the filter is on the right side at the bottom and can be closed with a hatch.
Please note! There are compact washing machines, they have a loading of up to three and a half pounds of laundry. Such models may not have a drain filter, but such models are very rare.
The washing machine filter cleaning process.
We will tell you how to clean the filter step by step, so do experts and recommend similarly to clean the filter at home. And so let’s break it down point by point:
The first thing you have to do is to disconnect the washing machine from the power grid and turn off the water tap. You may have to move the appliance out of the way to do this. Do not ignore these tips, so as not to flood the bathroom with water or worse, suffer an electric shock. And it is better to have a rag, some utensils or a basin.
Determine where the drain filter is in your washing machine. If it is covered with a protective panel, you need to remove it. If the filter is closed with a hatch, then this must also be opened. Sometimes the hatch cover opens without any problems, and sometimes you need to use a flathead screwdriver to pry the cover open. But, you have to be very careful not to damage the manhole cover. Removing the panel, you must also be careful and do it carefully. This panel is held on special latches or hooks, and remove it in two ways, depending on the model of the washing machine:. Lift carefully the upper part of the panel with a screwdriver, and pull it toward you;. Slide the panel to the side, usually it is from right to left.
Prepare in advance a rag, so that you can wipe the remaining water in the washing machine. You must understand that the water is completely drained only from the tank, and in the drain system it still remains. And the filter is part of the drain system, and there is water in it, and when you take it out, it will spill on the floor. To avoid a puddle under the washing machine, put a rag under it immediately. Another option is to lift the washing machine housing a little and put a flat basin under it. There are washing machines in which the hatch or panel itself is a chute, through which the drain filter drains water into a container that you put. This is convenient in that it is not necessary to raise the washing machine. Masters give a useful tip! If you want to drain almost all the water from the tank, use an emergency hose for this. True, not all washing machines have it. If the model you’re using has one, you’ll need to take it out of the fixture and open the plug, drain the water into a prepared container, close the hose plug back up, and secure it back on.
But even if you have drained through the emergency hose, you will still have residual water in the machine when you remove the filter. For a complete drain it is necessary to turn carefully the plug of the drain filter no more than 60 degrees counter-clockwise and let the water drain completely. It may be that the filter in the washing machine is fixed by a special screw, you need to loosen it a little, using a screwdriver, and only then turn the filter.
Next, unscrew and remove the drain filter completely. This is not difficult to do. But, pay attention that there are such washing machines, which first unscrew the plug, which is used as a plug for water, and then pull out the filter.
The filter should be cleaned and rinsed. Before you start washing the filter, you should first clean it, that is, pull out all foreign objects, hair, fiber residue, and the like. Then use an ordinary dishwashing sponge and use its abrasive side to clean off limescale deposits from the filter. Then rinse the drain filter well under running water.
Please note! The filter should be washed under warm water, but never in hot water. The plastic and the sealing rubber could be damaged by the hot water.
How to : locate, remove and clean filter on a Indesit Washing Machine
Check the drain pump. To do this, check the drain pump, there should be nothing left in it either. Also spin the impeller, it should rotate freely.
Insert the filter back into the washing machine. Insert the filter should be even with no tilting, tight, but very carefully. If the filter was fixed with a fixing bolt, then screw it back on. In some washing machines, you must first install the filter, and then tighten the lid, which fixes it.
Checking the washing machine after cleaning the filter. This is to avoid flooding when washing. So we check the washing machine after installing the cleaned filter. To do this, you need to put the rinse program, and check if there are no leaks anywhere in the area of the drain filter. If everything is normal, then close the filter with a protective flap or panel and you can safely use the washing machine.
How often should we clean the filter?
If you take into account the manufacturer’s recommendations, they recommend cleaning the drain filter at least once every four months. But, this is relative, because it all depends on how often you wash. For example, a family with small children will use the washing machine daily, respectively, the filter will clog faster, and in this case it should be cleaned monthly. How often you need to clean the filter also depends on what you wash most often. If it is a flannel and baize, they have a large number of lint, which remain on the drain filter after washing, thus clogging it.
But if you wash a down or feather pillow in the machine, then you need to clean the filter immediately after the end of the wash.
If the filter is not cleaned, what will be the consequences?
At first glance, it would seem, what’s the big deal if the filter is not cleaned. But in fact, serious problems can arise. About some of them we will tell you below:
The filter unscrews but does not come out what to do?
If you don’t clean the drain assembly for a long time, you may run into the problem that the filter won’t come out. Either you can not unscrew the filter, because this is prevented by foreign objects, or on its threads and sealing rubber formed scale.
If you can’t get the drain filter out, it means that there is a foreign object or a lump of debris stuck in it. There are two ways to solve this problem:
To do this, you will have to partially disassemble the washing machine. We remove the back or front panel of the washing machine, it depends on the model, disconnect the wiring, remove all the clamps that fix the drainage pipe to the pump and the hose that goes to the volute of the pump. After that remove the pump together with the volute. The filter can either be cleaned through the drainage tube or the pump and volute can be disconnected. Then the filter can be cleaned through the pump port. After such cleaning, the filter should unscrew.
Pay attention to the following! This method of filter cleaning should only be used if you have an understanding of how the washing machine and its drain system are constructed. If you do not have this information, it is not worth the risk, and it is better to contact a specialist.
The filter was cleaned but began to leak.
We already mentioned above that after cleaning, you should check if the drain filter is leaking. And what to do if you see a leak? Well, first of all do not panic. And carefully read why this can happen.
You may have installed the filter incorrectly after cleaning it or screwed it loosely in place.
The reason may be that over time, the gasket has lost its properties and needs to be replaced. It can be a matter of replacing the gasket only, or replacing the entire filter if the gasket is not available separately.
The filter or its threads may have been damaged during the cleaning process. This happens if you force when you clean the filter. The problem requires replacement of the filter.
Here is such a detailed instruction on how to clean the drain filter. We hope you find it useful. And timely maintenance of your washing machine will save you from unnecessary costs and worries.
How to remove?
In order to clean the drain filter, you must first remove it from the appliance itself. In order to get it out, you need to perform the following actions:
- Remove the protective cover from the housing;
- Find on the filter cover itself a small notch on the side of the filter;
- grasp it with your fingers and unscrew it;
- If it is difficult to unscrew, you must check if the filter is additionally secured with a bolt;
- if there is one, you must first take it out and then remove the filter itself.
In some situations, especially when the drain pan has not been cleaned for a very long time, or the machine has recently begun to produce frequent errors during operation, it can be very difficult to remove it. In this case, do not force and try to pull it out. Simply do the following
- to free up space around the automatic machine;
- Lay the appliance on its side so that the filter itself is as close to the floor as possible;
- unscrew the pump;
- through the resulting opening unscrew the filter from the inside.
How to clean Indesit IWB5113 filter (difficult to open!)
If it is necessary to clean the inlet filter, if there is one, unscrewing is performed according to the same scheme. But instead of the protective cover, the first thing to do is to open the filling opening in the place where the hose is connected to the device, and only then unscrew the filter itself.
How to clean the filter in a washing machine Indesit
Before cleaning the filter in an Indesit washing machine, it is necessary to study the manufacturer’s instructions to quickly find this element and perform its removal without damage. Devices of this company are of high quality, but the duration of operation depends on the proper maintenance ? Cleaning the drain filter of an Indesit washing machine, both with horizontal and vertical loading, the process is not complicated, and if you follow the algorithm of actions, you can easily avoid mistakes.
How to Clean a Washing Machine Filter
Owners of washing machines know that the service life of household appliances depends not only on the choice of high-quality model. produced by a reliable manufacturer (Miele, Bosch or Samsung, for example). Correct care can significantly extend the time of operation. Sooner or later you have to deal with the issue of removing clogs in the automatic washing machine filter.
To understand how to clean the filter of a washing machine, you first need to understand where the debris appears in it. Hard tap water contains a number of small and relatively large impurities. Their penetration into the mechanism of the washing machine does not affect positively on its work. The second cause of clogs is water flowing out after directly washing clothes.
With what and how to clean the drain filter of the washing machine
By the phrase “clean the filter in the washing machine” is often understood as cleaning the drain filter. It is located at the bottom of the machine under the plastic cover. It is held in place by latches that can be removed with a screwdriver or by hand. If you don’t know how to clean your washing machine pump filter, follow these instructions.
- The device itself is like a plug, which is screwed into the washing machine.
- It’s easy to unscrew: you need to twist counterclockwise by grasping the notch on the plug.
Sometimes these parts are attached with a bolt and can be unscrewed with a screwdriver.
Water will most likely leak through the hole that appears, so have a container ready beforehand. You can slightly tilt the machine backwards to put a larger container.
When all the water is out, shine a flashlight on the contents, take out the debris, and then wash the filter itself. After that, the device can be returned to its place and the cover screwed on.
Screw in the element as far as it will go to prevent it from leaking.
If the drain filter for the washing machine is very dirty and not unscrewed, it is recommended to put the machine on its side and remove the pump from the inside, then try to unscrew the element from the inside. If this did not help either, you will have to remove the design completely and disassemble it separately.
Such a procedure is recommended to be carried out regularly, so that there are no problems with unscrewing the device. Also, through this device you can get small parts which may have remained in things during washing, such as coins, clasps, buttons, underwear bones.VIDEO INSTRUCTION
Dirt removal options for the sieve
Drainage filter is also called pump, drain, garbage, as it is associated with the operation of the pump in the washing machine, its main task is the sifting of debris. Following the instructions, the drain filter should be cleaned twice a year, this will help prevent clogging and avoid damage to the unit. Filtered coarse and fine debris goes into the catch basin, where it is automatically ejected. With clean sockets, the pump works properly. In cases where the grid cannot be removed due to heavy soiling, the washing machine is turned sideways, the pump is unscrewed and the filter is unscrewed from the inside.
To remove debris from the drain filter, you need to open the hatch door, which is located on the front panel in the lower right corner. Place a container under the water drain hatch when tilting the unit. After draining the water, you need to disconnect the hose.
The following tools should be used during operation:
Unscrew the filter cover anti-clockwise or, if equipped with a catch, unscrew the screw. To clean the grid, you can use a coarse rag and water pressure. After cleaning the hose and the filter socket, place the clean part back in place and screw securely. After cleaning, switch the machine on to drain mode and check the operation.
Clean the part as follows:
- Place the filter under running hot water.
- In cases of heavy soiling it is necessary to soak the part in hot water for several hours, adding citric acid. This method of cleaning will get rid of lime scale and unpleasant odors.
- Cleaning with an old toothbrush is possible.
- After rinsing the part, you need to remove the dirt from the hole where the filter was.
- Insert the grid of the filter in the seat and close the cover.
The washing machine has a second inlet filter. It is a metal mesh that is installed on the fill hose at the inlet to the machine near the water valve. With the help of this grid is a coarse cleaning of water from impurities.
If the water pressure is weak when pouring into the washing machine, you may need to clean the inlet filter element. To do this, you should:
- Turn off the water and shut off the water tap, then unscrew and remove the clean water hose.
- After unscrewing the filler hose, you must remove the mesh: take pliers, clamp the filter, gently rotating in a circle, pull the mesh out of the hose.
- Rinse the filter thoroughly under running water.
- Put the cleaned from dirt grid back in place.
If the dirt accumulation is not cleared, it is recommended to replace the grid with a new one. The connected hose, after installing the grid, must be checked for leaks. After all the filter cleaning steps should turn on the electric appliance for washing and check the water supply.
Before cleaning the filter, you should thoroughly prepare for the steps to be taken. Its disassembly is most often accompanied by the release of dirty water, which can flood expensive flooring.
To prevent possible trouble, the following should be done:
- Slide the built-in unit out of the kitchen cabinet, disconnecting it first from the utility system;
- Cover the floor at the place of operation with unnecessary cloths or oilcloth;
- Place a capacious container directly underneath the filter cover.
If before disassembling the washing machine has worked a full cycle with a rinse. you will need to pause for the necessary drain. If you do not do that, the amount of water will increase noticeably when disassembling the filter.
After completing the preparatory operations proceed to the removal of the filter from the machine and its subsequent cleaning.
Of the auxiliary materials and cleaning tools you will need a piece of flannel cloth, rubber gloves and citric acid.
The procedure for removing the filter trap is as follows:
- First grasp the tab on the cover and turn it counterclockwise to pull it toward you.
- If you can not do it because of accumulated dirt and scale. it is necessary to use a plastic hammer and lightly tap on the housing.
- After unscrewing the base of the filter completely, then you will need to take it out and get ready to clean.
If when unscrewing the housing does not feed and after tapping on it. it means that it is additionally fastened to the bolt. When performing these procedures, not only does the filter dirt trap need to be cleaned, but also the cavity in which it is attached.
To do this, wear rubber gloves and remove all foreign objects (buttons, coins, etc.). п.). Afterwards use a toothbrush to blow away small particles of dirt and a flannel to remove any mucus that may have accumulated on the walls.
Wipe the cavity walls with a moist cloth or rag and leave it to dry for some time.
Procedure for cleaning
The following steps are required for cleaning:
- Clean off any dirt or hair that has adhered to the parts by hand.
- Rinse the filter head under running water while using a toothbrush or soft brush.
- Allow it to dry and inspect it for debris.
- After cleaning is complete, reassemble the filter unit.
- This is accomplished by inserting it into the cavity and turning the housing clockwise.
Soaking the filter in cold water, as at low temperatures the citric acid dissolves better, and the plastic body of the device is not deformed. In addition, from hot water, the seal loses elasticity, which will break the tightness of the joint.
Ways to clean the filter in an Indesit brand washing machine
If you notice that your washing machine has become noticeably worse, the problem is most likely due to a clogged filter, designed to protect the machine from unwanted parts inside. And now it is time to learn about how to clean the filter in the washing machine Indesit, and whether it is possible to do it by yourself without the help of specialists.
Where the drain filter is installed
Drain, aka trash, drain or pump filter, refers to the pump and is used to detain large and small debris, which appeared during the washing in the tank of the device. This is necessary so that foreign objects do not get into the pump or pipes when draining and do not deform them. To clean this unit, you will need to know where the drain filter is in the washing machine Indesit.
To unscrew the pump filter, you must remove the plinth panel on the front of the machine. It is held by latches, you need to pry them with a knife or other tool. Behind the panel there is a filter cover, it is painted black and equipped with a handle. On some models of Indesit washing machines may not be the plinth panel, and a small cover, which also holds on the latches.