ways to clean your vitrified clay cooktop. Clean without damage
Fiberglass covers on cooktops (induction stoves) are not susceptible to high temperatures, are aesthetically pleasing, and are therefore in high demand in professional and home kitchens. Due to the incomplete heating of the glass ceramic, they are easier to clean from food particles, oil and grease than standard cooking stoves. How to clean your vitrified stove, remove dirt without damaging the surface or causing streaks or scratches? Read about it in our article.
Let’s look at typical examples from life, which in many housewives cause if not a panic horror, then a strong dissatisfaction and irritation so exactly.
Getting rid of soot
Note that if you clean your induction stove daily immediately after use, the chances of unpleasant, multi-layered carbon deposits will be reduced to zero. However, not always our desires coincide with our own capabilities, so here is a step-by-step instruction for eliminating this annoying artifact:
- Apply the cleaner to a cloth and place it on the problem area;
- wait 10 minutes. during this time the food remains spoiling the appearance will be safely soaked;
- Gently scrape away the softened bits with a scraper;
- Remove it with a cloth and wipe it dry.
A normal sunflower oil will also help to clean the induction hob at home. Simply apply it to the contaminated surface, wait 5-10 minutes, and then clean with a cloth dampened with warm water.
Or baking soda. Mix it with water to the point where it forms a paste, and then apply the resulting mass to the desired area. Everything else. according to the algorithm given above.
Washing away grease
If conventional means for glass ceramic did not cope with grease stains, and the surface does not please the eye, it makes sense to try ammonia.
- Mix it with water (recommended ratio is 1:5);
- Pour the resulting liquid into a container with a sprayer;
- Spray on the surface where there are grease marks;
- Allow about 10 minutes for the alcohol to produce the desired effect;
- wipe with a cloth or sponge.
Eliminate white spots and stains
Another problem associated with the use of induction stoves. Most often appears in cases of salty or sweet water boiling on the surface.
Even the most effective vitrified clay cleaner sometimes cannot remove these stains.
But this does not mean that they should not be used: you should initially treat the soiled area with a similar gel. He will remove the roughness and soot, but the stain, even if it becomes less noticeable, but it will still remain.
No problem: then. here’s the most important thing. use a cleaner for steel surfaces. And do not forget to remove its traces with a soft cloth as soon as the whitish stains and smudges are safely gone.
How To Clean Induction Cooktop | Cleaning Tips for Induction Stove
Cleaning tools for your induction hob
If you have purchased a glass-ceramic cooktop, you need to take care of cleaning tools and supplies. You will need:
- Scraper. It can be plastic, rubber or more durable. steel with a removable blade.
- Special glass ceramic cleaner. They don’t scratch the surface and are effective against stubborn dirt. A neat bonus is that these cleaners leave a thin silicone film on the glass ceramic hob. It protects delicate material from damage and makes it easier to clean later.
Well-known manufacturers of household chemicals for glass-ceramic care. “Top House”, “Domax”, “Selena-extra. For removal of greasy, stubborn stains we can recommend the following remedies: “KENOLUX GRILL”, “Adriel”, Bugi grease remover “Shumanit”.
Additional tips for induction stove owners
To keep your electric stove looking its best for a long time, it’s worth following these tips:
- Only use cookware for this type of stove which has a perfectly flat bottom.
- Do not move pots and pans around on the stove: this may cause micro-scratches on the glass, which cannot be removed with detergents.
- Before putting the dish on the surface, make sure that its bottom is absolutely dry.
- If you clean vegetables close to the cooking surface, particles of soil that get on the glass can lead to micro-scratches. That’s why it is better to wash potatoes and peel carrots away from the stove.
- It is advisable not to use powder detergents to clean the appliance: sometimes the powder does not dissolve completely, and solid particles can damage the cooking surface.
Look for the special marking on the dishes
Cleaning an induction stove is not too difficult, as long as you keep in mind a few details. To ensure that your cooker lasts a long time and looks good, use only soft cloths and a special silicone scraper.
Not everyone gets to take care of the stove on a daily basis, as a result the surface requires cleaning by more serious methods. To get rid of burnt food particles, they must first be soaked. Soak soft cloths in a detergent solution and place them on any problem areas. After a few minutes, the dirt will soften, and you can easily scrape it off with a scraper (keep the scraper at a 45 degree angle to the surface). Finally repeat the second and third steps from the previous section.
An induction stove scraper comes with a replaceable tip
If after these manipulations on the glass panel remained white spots, remove them with table vinegar. Soak a soft cloth in it, squeeze it out, and wipe the white spots.
When a caked-on encrustation refuses to come off, it is sometimes tempting to use an aggressive cleaner for plumbing or tiling. Do not do this under any circumstances! Exposure to caustic chemicals can cause irreversible damage to the hob surface. To remove “stubborn” dirt, reapply a cloth with detergent solution, but hold it a little longer, and then repeat the treatment with a squeegee.
Use of abrasive cleaning agents can produce this result
Ways to clean daily
Only soft cloths and tools that cannot scratch the surface can be used
One of the prerequisites for the proper operation of the stove is the perfect smoothness of the surface of the induction hob, so cleaning it properly is very important. Cleaning the glass ceramic cooking surface must be a systematic procedure that must be repeated after each meal or at the end of the day. This will help avoid the formation of dried and baked traces of the food being cooked. Thanks to timely wiping, it is possible to maintain the required level of cleanliness of the device without much effort and risk of damage and to prolong its service life.
Before starting the cleaning process, it is necessary to prepare the following tools. Cleaning the stove will help:
- microfibre cloths;
- Terry towels;
- foam sponges;
- melamine sponges;
- silicone and/or rubber wipers.
All items for cleaning the induction hob must be separate. they must not be used for other purposes, as they can leave behind dust particles that will later act as an abrasive.
The top five most popular products designed specifically for cleaning glass ceramic surfaces include:
- Top House. silicone cleaner. It’s enough to apply a few drops on the surface of the RTD to get rid of even heavy dirt. Product price. from 280 to 350 per bottle.
- Amway Oven Cleaner It is not only good for cookers, but also for microwaves and ovens. It can be used for 15-20 minutes and then wiped off with the dirt.
- Glass Cooker Cleaner Dr. Beckmann has very good reviews and the detergents are reasonably priced at 250. It’s very economical to use, and a couple of drops are enough to clean the entire stove.
- Cream for cleaning induction stoves firm Topperr (Germany). a 300 ml bottle can be bought for 250.
- KILROCK spray with a spray gun made in the UK. a 0.5 liter bottle costs 230.
You can also clean the hob with glass cleaner or gel, which is used to clean glass and ceramic dishes. It is best to use an aqueous solution of gel-type cleaners. Powdered detergents should never be used for this purpose.
For daily cleaning, the detergent should not be applied to the surface of the panel, but on a washcloth or wipe cloth. Wipe the stove with it and rinse away any remaining cleaning liquid with clear water. After damp work, you should wipe the stove dry with a cotton cloth or a soft terry towel. excessive moisture can lead to rust marks.
Fiberglass ceramic induction cooktop surface is strong enough to withstand the weight of pots and pans. It cannot be damaged by intense heat. However, scratches may appear on it. Most often they are microscopic and only visible in light and glare. If they annoy you or there are so many that the appearance of the hob suffers, the surface can be polished.
A little Gauze paste will do the trick. You can find it at most car dealerships. The price is around 50g for 300g. Enough to polish an induction hob.
- The paste with numbers 1,2,3 is softer and masks microscopic scratches.
- Number 4 is abrasive. It is used in tandem with a sander (felt tip).
To fix the plate, you need to dilute the paste with a few drops of machine oil, apply it to the scratched area and actively rub it with a dense cotton cloth. The process is labour-intensive, but definitely worth it. The surface is polished to a perfectly smooth and shiny finish.
A tip: Keeping things tidy in the fridge: practical storage ideas
In most cases, the GOI paste completely solves the problem of scratches. It may not work only if the glass ceramic is covered with cracks and chips. In this case, the only option is to completely change the top protective layer. The average glass ceramic coating costs 10,000.
Clean the vitrified stoneware from the soot
Various grease formations remain on the glass ceramic hob surface during cooking. The following tips will help you get rid of stale grease and soot at home:
- To remove a minor formation on the panel will help the usual warm water. Sprinkle it around the soiled area and then remove the soot with a sponge;
- In the case of an average degree of grease soot a special cream or a sparing household solution is applied to the surface. After a while it is scrubbed with a rag;
- Remove stale soot from the glass stove with the help of an alkaline detergent. It is applied to the soiled area and removed after 30 minutes with a soft material;
In addition, to remove soot from the glass-ceramic helps improvised household remedies.
For example, vinegar is an ideal and safe option for cleaning a glass ceramic hob.
Vinegar has a disinfecting effect and removes any bacteria and microorganisms from the surface.
Preparation of a cleaning agent based on vinegar includes the following steps:
- The first step is to mix vinegar and water in equal parts;
- The second step is to pour the solution into a sprayer;
- The third step is to spray in the place of contamination and wait a few minutes;
- Then wipe the stove with a dry cloth.
After these measures, the stove will shine like new.Information. To fight with the soot on the stove housewives also help ordinary baking soda. The product is mixed with water to a paste-like state and distributed to the soiled area. Leave the paste for a few minutes, then remove with a sponge and wipe with a dry cloth. Repeat the procedure several times, if necessary. This is interesting: How to remove glue from wallpaper and walls, wash vinyl after gluing
Glass from burnt milk
Not only can grease stains remain on the surface of the glass stove. Often it is necessary to clean the stove from burnt milk. Oil can remove organic stains from the surface.
Wait until the stains have cooled off before you get down to work.
Otherwise you can get burns and damage the material.
Use olive oil to clean the vitrified clay cooker.
The product should be applied to a rag or a piece of absorbent cotton and leave on the dirty area for 20-30 minutes.
After that, you can remove the milk stain with a sponge. The oil acts as a softener and helps remove organic stains quickly. Then polish the hob with a window cleaner.
Important! It is worth noting that the vegetable oil acts as a protective agent. Apply a thin coat of oil and rub it in. The substrate is covered with a protective film which allows you to quickly remove any stains.
The ideal cleaner for glass ceramic cooking surface is ammonia alcohol. The solution can remove any stubborn stains and plaque, as well as a good polish stove. To prepare the solution, mix ammonia with 250 ml of water. Then spread the remedy in the place of contamination for 10 minutes. Then carefully wipe the spot with a dry cloth.
In the area of burners to remove stains from burnt milk is recommended a soft sponge with the addition of a soap solution. In addition, to cope with organic pollution will help to clean ceramics, but without abrasive particles in the composition.
How to clean an induction stove with folk methods
If you do not have at hand a special detergent composition, then cope with carbon deposits will help folk methods. One of the easiest remedies is baking soda, which perfectly copes even with stubborn dirt. It can be used as follows:
- Mix the baking soda powder with water until you get a paste-like mass.
- Apply it to the soiled area and wait about 5 minutes.
- Carefully begin to remove the paste with a soft damp cloth.
- If you see that it is not all clean, then pour a little vinegar on the baking soda. it will help remove stubborn soot.
- Wipe the plate several times with a clean cloth, rinsing it periodically with water and wringing it out.
Soda is an environmentally friendly cleaning agent
It’s very effective for removing runaway milk stains from the glass pane. Dilute 1 part of the alcohol in 5 parts of water, pour the resulting mixture into a sprayer and spray the surface of the glass. After 10 minutes wiping the stove with a soft cloth you will see a clean shiny surface.
Pour the detergent solution into the atomizer to evenly distribute it
Any cooking oil is an excellent glass ceramic cleaner. Apply it to a soft cloth and put it on the dirt, and after half an hour wash the surface with detergent. Wipe the stove with a clean, damp sponge.
Vegetable oil can help save detergent
Oil can be used not only for cleaning, but also to prevent contamination later. After cleaning the stove, wipe it with a cloth lightly dampened with oil. A protective film is formed on the surface, which allows you to remove any stains with a damp cloth without detergent.