Basic rules
The care of a household appliance requires caution and care during the procedure.
Requirements for cleaning a ceramic hob:
- Do not wash or use detergents on the appliance until the cooking surface has cooled completely: the ceramic glass surface may start to crack due to the difference in temperature;
- even if the coating is heavily soiled, do not use a knife, metal sponge, stiff-bristled brush or cleaning products with abrasive particles to remove it;
- It is also undesirable to wipe the hob with the same cloths or sponges with which you wash dishes and other objects: particles of detergent and grease left in the material will leave streaks on the smooth surface.
Warning! After removing the dirt, be sure to coat the appliance with a cloth dampened in clean water and wipe off any remaining moisture with paper towels or a towel, since water droplets, once dry, will also leave noticeable stains on the vitrified clay.
Not only the stove can be ceramic, but also the iron’s soleplate. Read about how to clean this household appliance here.
Basic steps to do it at home
Removing the grid
- make sure that the structural element is in a cooled state and remove it from the stove;
- Place the grids in the sink and rinse off the surface layer of dirt with hot water;
- To speed up the removal of grease, apply any abrasive detergent. the product is made of abrasion-resistant materials, so you do not have to worry about scratching it;
- leave the grates for a while and proceed to the next step.
Treating
- Spray or distribute with a sponge the selected product on all exposed areas of the kitchen appliance, treat with particular care places with ingrained stains, but in no case do not try to scrub them let them soak in a good detergent solution and then it will be much easier and safer to remove them;
- While the detergent is still “working” on the stove, go back to the grids: coat all parts of the element on its upper and lower surface with detergent, rinse and dry it.
- Rinse the hob effortlessly and gently;
- If there are stains or remains of food on its surface. apply the cleaner again, wait a little more;
- Afterwards, use a sponge to remove the dirt and detergent and sponge the hob several times with a sponge soaked in water.
Wipe dry, assemble
Dry the hob with a soft cloth or towel while polishing it at the same time. Reinstall the burners, grid.
How to clean the glass ceramic hob at home from soot. ways and means for cleaning
Cooktops made of glass ceramic are gaining in popularity because of their stylish and modern appearance. Also, unlike the old style stoves, glass ceramic stoves are easier to maintain. However, it is extremely important to follow the rules in order to avoid damaging the surface prematurely. Therefore, after buying such a device, you should know how to clean a ceramic stove from grease and carbon deposits, to preserve the beauty, shine for a long time.
Proper care for your glass ceramic hob ensures that it lasts a long time and retains its original appearance
How to clean an induction stove with folk methods
If you do not have at hand a special detergent, then to cope with soot will help folk methods. One of the easiest remedies is baking soda, which is excellent even for stubborn dirt. It can be used as follows:
- Mix baking soda powder with water until a pasty mass.
- Apply to dirty places and wait about 5 minutes.
- Carefully remove the paste with a damp, soft cloth.
- If you see that not all has been cleaned, pour a little vinegar on the baking soda, it will help remove stubborn carbon deposits.
- Wipe the stove several times with a clean cloth, rinsing occasionally with water and wringing.
Soda is an environmentally friendly detergent
Ammonia
Effective in cases where you need to remove stains from the glass panel from escaped milk. Dilute 1 part of the alcohol in 5 parts of water, pour the mixture into a spray gun and spray the glass surface. After 10 minutes wiping the stove with a soft cloth you’ll see a clean and shiny surface.
How to Clean Burnt Stove Top. Glass or Ceramic. THIS REALLY WORKS!
Pour detergent solution into dispenser for even distribution
The oil
All vegetable oil is an excellent cleaner for vitrified clay. Put it on a soft cloth and apply it to the dirty area, and after half an hour wash the surface with detergent. Wipe the plate with a clean, damp sponge.
Vegetable oil saves detergent
Oil can be used not only for cleaning, but also to prevent fouling in the future. After cleaning the hob, wipe it with a cloth lightly moistened with oil. A protective film is formed on the surface, which will allow you to remove any stains with a damp cloth without detergent.
How to clean a glass ceramic cooktop
Foodstuffs are a major source of cooktop contamination. When cooking a hot meal, some of the broth, milk will drip onto the surface of the cooker hob. Runs off compote, sourdough, porridge. Another option is splashing melted fat or oil from frying without a lid.
Carelessness, haste in loading food into the cooking pot is accompanied by falling of cut vegetables, spilling of salt, sugar, oil, sauce, etc.п.
Adds to the hassle of cooking in a full pan. Stirring the cooked food, causes pasta, potatoes, and vegetables to “run away” beyond the cookware.
The result of all these factors is fouling, oil and grease stains. Streaks form on the stove, dried burnt food particles remain. The only method is to clean the vitrified clay cooktop.
Maintenance rules
Induction hobs are quickly gaining popularity among users not so much because of the properties of heat transfer without heating a larger surface, but because of the stylish and sleek design.
These cooktops provide a smooth (and even mirror like) surface. The material used to manufacture stoves withstands shock and high temperatures, but it is very easy to scratch (even accidentally). If a knife or fork falls on the stove, it will leave a mark on the surface. Remember that when you’re looking after your appliance.
RECOMMEND! On our site you can find detailed instructions on how to clean the inside of your fridge after the defrosting process.
In order for the glass ceramic stove to serve for many years, you need to follow some recommendations:
- Wash your stove once it has cooled down completely. Otherwise, the stove will have soap spots, burnt food, drips, and other dirt on it 100% of the time. You can also easily burn yourself on such a surface.
- It’s best to wipe down the stove before you start cooking. This may sound strange to some people, because the surface is already clean. But there are already small stains on the stove, they will begin to stick and stick during operation, from small such stains will quickly turn into noticeable and difficult to remove.
- Carefully watch the cleanliness and smoothness of the bottom of the dishes you put on the tile. Rough, oily, uneven bottoms can damage the surface.
- Make sure there are no water droplets or streaks on the stove after cleaning it. After cleaning be sure to wipe the surface with a paper towel or a dry, soft cloth.
- Do not use the same sponges or rags to clean your induction hob as you do dishes, wipe down furniture or windows, for example. Cleaning with such rags will leave stains and streaks.
Daily Care
For your induction hob to last longer and keep it looking presentable, clean it daily.
IMPORTANT! Daily care involves regular wet cleaning with an appropriate mild detergent and a clean sponge without any abrasives. After this cleaning, wipe the surface dry with a cloth or paper towel.
- Allow the cooktop to cool completely.
- Moisten a soft and clean (!) Sponge, wipe the tile surface.
- Leave the cleaner on for a few minutes to allow it time to dissolve any burnt-on food residue.
- Wipe the surface with a clean, damp cloth to remove soap, grease and limescale residue.
- Wipe dry with a paper or cloth towel.
Complete cleaning
If you can’t get rid of stubborn stains on your induction hob, then an ordinary wet mopping won’t do the trick. This is where you need to take a radical approach to solving the problem. For a thorough cleaning, you’ll need rubber scrapers and specialized cleaners for glass ceramic surfaces (stoves):
- Apply your regular detergent to the entire tile surface. On particularly problematic areas, place a cloth soaked in detergent. Leave everything for a few minutes.
- Wipe with a damp, clean cloth, and clean off any burnt food with a rubber scraper. Hold the spatula at an angle of 30-45 degrees to avoid scratching the tile.
- If the detergent does not cope with the dirt, it’s time to move on to the use of specialized products that are designed to clean induction hobs. Usually the instructions call for applying a small amount of the cleaner to stains and soot for a few minutes and then using a damp sponge or cloth to remove any residual solution or grease.
WARNING! Specialized hob cleaners should only be used with gloves, as they contain aggressive chemical compounds that can corrode the skin.
A separate topic. white stove deposits
Some owners of ceramic hobs find inside the burners white streaks or frosted with a clear white outline. These stains cannot be removed with conventional cleaners, but can be removed with a scraper and, for example, with Cif Cream (Russia).
Tip Cif Cream is universal and also suitable for care of induction and ceramic hobs, metal surfaces of household appliances and enameled coatings.
The reason for the appearance of white stains on burners is the wrong type of cookware for the type of hob. cheap aluminum cookware without a thickened bottom.
No matter how tidy a hostess is, stove surfaces get dirty in the process of cooking. White stains on the glass ceramic hob may appear if a pan with a wet bottom is placed on it, if clean water is spilled. The liquid evaporates and the salts it contains remain on the mirror surface in the form of a whitish lime residue. The most dangerous are sugar (syrup, caramel), plastic, foil on the hot panel. The molten mass hardens and adheres firmly to the glass ceramic surface; efforts to remove it can lead to chips and cracks. Therefore, such dirt must be removed immediately with a special scraper, before the mass has time to solidify or become charred.
White stains may also appear on the cooking surface:
- frozen grease spatters;
- fouling from escaped milk;
- Dried stains from broth, compote, or salt water;
- traces of contact with the bottom of aluminum or copper cookware;
- soiling from old carbon deposits on the bottom of pots, pans;
- Dirty sponge, fluffy cloths, detergent residue.
Fresh stains remove better than stale ones, so it is advisable to wash the stove as soon as it has cooled down.
During cooking, various grease formations remain on the surface of the glass ceramic hob. The following recommendations will help you get rid of stale grease and soot at home:
- The usual warm water will help to remove a minor formation on the panel. Sprinkle it in the area of contamination and then remove the soot with a sponge;
- In the case of a medium degree of grease fouling, apply a special cream or a gentle household solution to the surface. After a while, it is scrubbed off with a rag;
- Stale soot from the glass stove is removed with the help of a tool with alkali in its composition. It is applied to the contaminated area and after 30 minutes remove with a soft material;
In addition, to remove soot from the glass ceramic helps improvised household remedies.
Vinegar, for example, is an ideal and safe option for cleaning your glass ceramic hob.
Vinegar has a disinfecting effect and removes all bacteria and microorganisms from the surface.
Preparing a vinegar-based cleaner includes the following steps:
- The first step is to mix in equal parts vinegar and water;
- The second step is to pour the solution into a sprayer;
- The third step is to sprinkle in the place of contamination and wait a few minutes;
- Then wipe the stove with a dry cloth.
After these measures, the stove will shine like new.
Glass from burnt milk
On the surface of a glass stove can remain not only grease stains. Often the stove has to be cleaned of burnt milk. Oil can remove organic dirt from the surface.
Before proceeding, wait for the soiled area to cool down.
Otherwise you can get burns and ruin the material.
Olive oil is recommended for cleaning vitrified clay.
Apply the detergent to a cloth or a piece of absorbent cotton and leave it on the dirty area for 20-30 minutes.
After that, you can remove the milk stain with a sponge. The oil acts as a softener and helps remove organic stains quickly. After that, the plate is polished with a window cleaner.
To remove stains from burned milk in the burner area, it is recommended to use a soft sponge with a soap solution. In addition, to cope with organic dirt will help clean the ceramics, but without abrasive particles in the composition.
