How to Clean a Juicer Mesh

How to clean the juicer grid

In everyday use, cleaning the juicer and its parts seems to be a waste of precious time. But when its body of the machine is covered with stains and plaque, and the knives and strainer are clogged with residual cake, it is pointless to refuse cleaning. To return the juicer clean and shiny will help available tools that can be found in every kitchen. This is what we will talk about in this article.

Even if the manufacturer promises minimum splashing of juice when juicer works (like a Mquick 5 from Braun), drops and particles of cake still get on the body: this is inevitable. Carrot and beet stains are especially hard to recover.

Before buying it is better to read: Top 10 best centrifugal juicers

But if the plaque strongly penetrated into the plastic or covered the glass, to wash the juicer will help folk remedies:

• Sap stains can be smeared with a little cooking oil and wiped off with a sponge.
• Beige and orange stains can be removed with a mixture of baking soda and lemon juice. The composition should be applied to the surface and wiped, making a good sweep over the dirty places. Remove the remains of the mixture with a damp sponge and wipe dry.
• Vinegar and lemon solution will remove the stains. To prevent moisture from getting inside the machine when it is disassembled (for example, in Kenwood JE730), it must be done carefully, using a damp sponge.

Cleaning the Parts

It is hardly reasonable to put an unclean juicer (a real breeding ground for bacteria)!) in place, in the kitchen cabinet. Here are the quickest ways to clean it.

So that the usual duties do not turn into unpleasant consequences, you need to remember the lessons of physics and chemistry.

Even if it seems that the plastic of the household appliance is of good quality, it is better not to use abrasive agents. You’re almost certain to get micro-scratches on the surface.

To prevent the metal removable parts from becoming rusty, wipe them dry.

Before you start this method of cleaning, it is worth to read the instructions on how safe it is for the device to wash it in the dishwasher. You can’t wash in these cases:

• If the appliance has rubber gaskets: they can become deformed by very hot water and harsh detergents.
• There are hard-to-reach places in some parts of the juicer, which simply can not be washed by large household appliances.

Note: You should be careful when washing plastic parts in the dishwasher: in most cases, they do not withstand the influence of special detergents. they can fall apart or get stained.

By the way: Top 15 best juicers

Step-by-step instructions

• First of all, unplug the juicer.
• Put all removable parts in the sink: bowl, lid with neck, pusher, cake container, juice container, etc. д.
• Wash all the parts in warm water with a soft sponge and soap or dish gel. Do not use abrasive agents.
• Metal mesh elements and filters are the most likely to get dirty. Usually the juicer comes with a special brush for cleaning them. If you do not have one, use an old toothbrush.
• After you have cleaned all the parts, rinse them thoroughly under running water and allow them to completely dry. Only then can you put them back in.
• The part of the juicer, where the motor is hidden, just wipe with a clean, damp cloth. Make sure that moisture does not accidentally get inside.

We would like to take this opportunity to remind you that we have a useful video about juicers (relevant if you can not decide on the choice of this device):

What to do if the cake is already dry?

If you still forget to clean the juicer immediately after use or if you find old dried contamination, do the following. Fill a basin with warm water, dilute in it 2-3 tbsp. л. soak the dirty parts in dish soap for about 15-20 minutes. Then take them out, scrub with a brush, wash with soap and water, rinse and dry them well.

How to wash the slicer and strainer of a juicer

Running water and a regular sponge will have a hard time cleaning these parts. It is not much easier to clean the grate and strainer with a brush (brush), which are often included. And even harder than a dried cake is a fruit plaque. How to overcome it? There are two ways.

Good to know: 10 best citrus juicers. Rating by MOYO.UA

Dishwashing detergent diluted with warm water is an excellent way to get rid of stuck and dried-on cake. The clogged parts are immersed in a container with the mixture for a quarter of an hour. Then it is enough to rub them a little with a sponge or toothbrush and rinse under running water.

Interesting: The polished strainer, like the Philips HR1919/70, is easier to clean. And the Philips HR1855/80 even has a pre-cleaner mode.

Soda solution is no less effective helper. If you soak the parts in it for half an hour, the sticky cake will come off easier.

The table will help you to systematize and remember the information:

Timely cleaning of parts and technique body will save you a lot of efforts and time. But if you approach the question of general cleaning properly, you can do it pretty quickly. Everything you’ll need is probably in your refrigerator or kitchen cabinet.

If your family loves fresh juices, then you probably use the juicer every day. With proper and careful use your juicer will last you quite a long time. The juicer, like any other appliance, has rules of operation and care. One of the basic rules of care is to clean and wash it after each use.

How to Clean a Juicer?

So, cleaning your juicer should be done right after you’ve finished juicing. Be sure to unplug the appliance before cleaning.

Remove all removable parts and rinse under warm running water, using a normal kitchen sponge and dish detergent. Make sure to rinse. The use of abrasives is not recommended, nor is the use of a hard sponge surface.

Removable parts of the juicer come in three kinds (mostly). metal, plastic and glass. Carefully read in the appliance’s instructions if they can be washed in the dishwasher. As a rule, it is not recommended to wash plastic parts in a dishwasher, because they can get stained, deformed or even melt under the influence of high temperature and strong detergents. Metal and glass parts are probably machine washable. Always dry and wipe all removable parts of the juicer thoroughly after washing.

Every juicer has a sieve or strainer or a disc sieve and a strainer (except for citrus juicers). This is the most difficult part to clean. It is not easy to clean with water and a simple sponge. Sometimes manufacturers take care of their customers knowing this problem. The modern juicers often include a special brush to clean the strainer, and even a squeegee brush. Unlike sponges and rags, it is much easier and faster to remove residues of vegetables, fruits and berries. If they are not in the kit. do not despair. An old toothbrush will be an excellent helper.

If it has happened so that you have not washed the juicer at once, and the cake has stagnated, or even worse. it has dried out, you should not get discouraged either. It is necessary to dilute a small amount of dishwashing liquid in warm water and put there the dirty parts for 10-15 minutes.

It is not recommended to wash the part of the juicer, in which the motor is located, so that water does not get on the motor, otherwise it can put it out of operation. Usually the engine in the device is reliably protected, but nevertheless you should not take the risk. It is enough to wipe it with a slightly damp cloth. And now you can assemble all the parts and get your juicer in working condition.

How to clean the juicer?

So, the juicer should be cleaned immediately after you finish juicing. Before you start cleaning, be sure to unplug the appliance.

Remove all removable parts and rinse under warm running water, using a normal kitchen sponge and dishwashing liquid. Always rinse. Do not use abrasive detergents, or hard sponges.

The juicer‘s removable parts come in three kinds (mostly). metal, plastic and glass. Carefully read the instructions for the appliance if you can wash them in the dishwasher. As a rule, it is not recommended to wash plastic parts in a dishwasher, since they can get stained, deformed, or even melt under the influence of high temperatures and strong detergents. Metal and glass parts are probably machine washable. Always dry and dry all removable citrus juicer parts thoroughly after washing.

Each juicer has a sieve or strainer or a disc strainer and filter (except for the “citrus” juicer). This is the most difficult part to clean. It is not so easy to clean with water and a simple sponge. Sometimes manufacturers take care of their customers, knowing this problem. Modern juicers often have a special brush for cleaning the strainer, and even a squeegee. Unlike sponges and rags, it is much easier and quicker to remove the remains of vegetables, fruits and berries. If they are not included in the kit. do not despair. An old toothbrush will be a great helper.

If, however, it happened that you did not wash the juicer immediately, and the cake stagnated, or even worse. dried out, do not despair, too. You need to dilute a small amount of dishwashing liquid in warm water and put there the dirty parts for 10-15 minutes.

It is not recommended to wash the part of the juicer where the motor is located, so that water does not get on the motor, otherwise it could put it out of operation. Usually the motor in the device is reliably protected, but still it is not worth the risk. It is enough to wipe with a slightly damp cloth. And now you can assemble all the parts and get your juicer back to working condition.

How to remove plaque from the juicer?

There is another problem: some vegetables, fruits and berries stain some parts and containers of the juicer with pigment and acid. Mostly it happens to plastic and glass parts of the appliance. What can be used to clean this stain? There are several options and recipes. Choose the one that seems to work best for you. Someone wipes the staining places with lemon juice or vinegar.

Someone wipes with baking soda or cooking oil. Someone carefully applies special cleaners for food glass or plastic, after consulting with a specialist. And some people use good old whitewash, dilute it in warm water in a ratio of 5:1 (add 1 part of whitewash to five parts of water) and immerse all the darkened parts of the juicer in it for 20-30 minutes. Then take it out and rinse it thoroughly.

(2 ratings, mean: 1.50 out of 5) Download

How to wash a juicer?

Juicer users know that the price to pay for a delicious juice is to wash the machine. The main parts are easy to clean, the strainer takes the most time. It is not easy to clean it, you have to resort to different methods. We show you a few ways today. So, how to wash the juicer?

After each preparation of the juice squeezer should be dismantled. Depending on the model, you will have about 5 removable parts on hand. You can safely put them under running water and wash them with detergent. To avoid scratching parts, it is better to refuse hard sponges and abrasive powders.

If you don’t want to wash by hand, then send the items to the dishwasher. Beforehand, read the instructions, whether the manufacturer allows you to wash the juicer in this way. As a rule, only metal or glass parts can be placed in the dishwasher. Plastic ones are scratchy and will not hold up to detergents. After washing them this way, they quickly fall apart. Also spoils their appearance, stains are left on the surface.

The next step is to clean the strainer. It would be a hassle. Some manufacturers give their juicers a special “scraper”, which can be used with juicers. It helps remove pulp residue that gets stuck in the holes of the strainer. If you don’t have one, you can use a sponge or baby bottle cleaner. You have to use force to clean the strainer. You can add detergent.

What to do if the strainer is too clogged? Try soaking it in a solution with baking soda or any dish soap. Doesn’t help? Then you have to clean every hole with a toothpick. Another effective way is to put the strainer in the steamer and steam it for a few minutes. After this procedure, stale pulp is easily washed away.

How to clean parts from fruit plaque?

For starters, you should understand that it will not do you any harm. Plastic parts are stained most often. Especially if you like to squeeze the juice from carrots. If you do not like the appearance of the parts, you can try soaking them in a solution with vinegar or citric acid. Another option is to wipe with vegetable oil or baking soda. Do not rub too hard so as not to scratch glass or plastic parts.

The most desperate housewives resort to whitewashing. To do this, make a weak solution and place the elements of the juicer in it for a few minutes. Such a procedure requires a thorough washing of the parts. We do not recommend this method, because the white residue is not good for the body. Whereas the orange color after the carrot leaves the beta ceratin. It is absolutely harmless to humans.

To avoid the difficulty of cleaning your juicer, don’t be lazy to wash it after each use. Even if some parts are stained, that’s okay. You can try to clean them. The main thing is not to use chemical or abrasive agents for this.

Cleaning procedure

In many kitchens juice is made with the centrifugal models, so how to wash a juicer will be considered on this kind of appliances.

• After making the vitamin drink disconnect the juicer from the power supply.
• Disassemble the juicer following the sequence of actions indicated in the user manual.
• Clean the removed parts from the remains of squeezed fruits (cake) and put them in a sink filled with warm water. You can add dishwashing detergent to the water for effective cleaning.
• Leave the juicer elements to soak for half an hour. If the surfaces are only covered with fresh deposits you can dispense with the soaking action.
• Using a small brush, without removing from the water the removed parts are cleaned.
• Wash large elements (cake and juice containers, pusher) with a sponge and dishwashing gel and rinse with clean water. You may try rubbing stubborn dirt with a rag that has some sunflower oil in it.
• Clean the separator with a brush under running water. It’s easier to clean the holes in the filter with a brush with infrequent bristles. If you don’t have one, make one from an old toothbrush by thinning the lint.
• Place the washed parts on a towel to dry.

Removable elements of the juicer are easier to clean than the main part with a motor. Clean the surfaces of this component with a damp sponge or cloth. If there is a heavy plaque, which is difficult to clean with a damp cloth, you can use the popular folk cleanser. citric acid or vinegar. These folk remedies will also help to clean the refrigerator, clean the oven, remove limescale in the electric kettle and in the care of other household appliances. Instead of acid the lemon juice will do, which can be made in a juicer.

Prepared solution for cleaning, based on vinegar or lemon, wash the surface of the juicer and remove plaque easier. The solution will cope well with heavy dirt on the removable parts. After cleaning the removed elements with vinegar or lemon cleaner rinse them again with clean water.

Plaque from beet and carrot juice can be removed with the baking soda mixture. For that purpose dilute the baking soda to a mushy state with lemon juice or vinegar. Apply the composition on the juicer surfaces and rub the resulting plaque with a sponge. Soda effectively removes dirt, so you can use this cleaner to clean the washing machine.

Having washed and cleaned the components, it remains to assemble the juicer. Before assembling it is necessary to wait for the complete drying of all elements.

Recommendations for juicer operation

It is much easier to take care of the juicer if you know a few tricks and tips.

• Wrap the cake container in a plastic bag. This will prevent fouling of the surface and make cleaning easier.
• After making juice immediately need to disassemble and wash the juicer. Fresh dirt is easier to remove without detergents.
• Do not leave even the slightest dirt on the surfaces of the juicer. They build up over time and are more difficult to clean.

The following tips, tricks, and recommendations will make cleaning the surfaces of the appliance easier. Folk remedies are good to clean the juicer and remove the plaque.

If your family loves fresh juices, you probably use the juicer daily. With proper and careful use your juicer will last you long enough. The juicer, like any other appliance, has rules of operation and care. One of the basic rules of care is to clean and wash it after each use.

How to Clean a Juicer

Our article today is a personal experience of using the juicer for a long time, and it will help you without too much trouble to clean the juicer after any vegetables or fruits.

When we buy a juicer for the first time we are very enthusiastic about using it, but after the first uses we realize that it is too troublesome to clean it after use. However, if you figure out a certain plan of action and follow it, getting natural juice at home will not seem to be such a troublesome affair.

How to clean a juicer without hassle

Let us take for example the most popular type. the centrifugal juicer.

The first thing you need to remember is to always use a plastic bag in the cake compartment! This simple rule will save you from staining the container with juice from the squeezed products. And this is exactly what hostesses spend a lot of time trying to clean the container of colored stains. So, before using the juicer, place a plastic bag in the cake container.

The second rule is to clean the juicer immediately after use. In this case you do not even have to use detergents.

• After use, unplug the appliance.
• Remove all removable parts. Collect all remaining pulp from them add it to the bag with the cake and throw it in the trash.

Fill the sink (basin) with water and put all removable parts (except the body with the motor).

Then each element is washed under the stream of water, the stronger the stream, the easier to wash the remains of fruits and vegetables. Use a small brush (you may use a toothbrush) to clean the small parts (filters and blades).

Cleaning the juicer step by step

Most hostesses use centrifugal juicers. Washing them can be done in several steps.

• First, the appliance must be disconnected from the power by removing the plug.
• Then disassemble the juicer, following the instructions of the appliance.
• Removable parts are cleaned from the cake and put in a basin filled with warm water or in a warm solution of detergent or simple household soap.
• Leave the removable parts of the appliance in the solution for at least half an hour. But if there is no plaque on their surface from the juice of fruits and vegetables, you can do without such a long soaking.
• Then directly in the solution wash the parts of the juicer with a brush.
• Waste containers after juicing and other removable plastic parts are washed with a sponge soaked in soapy water.
• Clean the separator under running water with a brush.

After washing, rinse the parts of the appliance and place them on a towel to dry. Reassemble the juicer only after it is completely dry.

It is much easier to wash the removable parts than the body with the motor. Wash it very carefully, preventing moisture from getting inside the appliance. If the dirt is not much, it is enough to wipe the body with a damp cloth. If there are spots on the body of the juicer, wipe them with a sponge soaked in a soap solution.

Removing scale from the juicer from fruits and vegetables

The acids from fruits and vegetables change the color of plastic, leaving an unsightly deposit on it. Home remedies can help cope with this problem.

Washing the juicer with baking soda

To remove plaque, soak parts of the appliance with warm water, then wipe them with a kitchen sponge with a little baking soda on it.

If the plaque is very strong, the juicer parts can be soaked for a couple of hours in a baking soda solution, for the preparation of which in 2 liters of warm water dissolve 4-5 tbsp. л. with baking soda. After soaking, wipe the appliance with a sponge and rinse.

Vegetable oil against plaque

Remove the color pigment after squeezing the juice of carrots or beets with any vegetable oil. Soak a dense swab in the oil, and then wipe the dirty parts of the appliance thoroughly with it. Oil is washed off with a warm soapy solution, then rinse machine parts in running water.

Washing the juicer with Belize

If the plaque is very old, and does not lend itself to cleaning, you can try to remove it with Bleach.

Dissolve 3 caps of bleach in 2 liters of water, then soak machine parts for half an hour in the solution. After this time it will be necessary to wipe the parts with a sponge and rinse them thoroughly in plenty of running water.

Cleaning procedure

In many kitchens juice is made with the help of centrifugal models, so let’s consider how to wash a juicer with this kind of home appliances.

• After preparing a vitamin drink, disconnect the juicer from the power supply.
• Disassemble the juicer by following the sequence of steps indicated in the user manual.
• Clean the removed parts of squeezed fruits (oilcake) and put them in a sink filled with warm water. You can add dishwashing liquid to the water for more effective cleaning.
• Leave the juicer elements to soak for half an hour. If the surfaces only have fresh deposits, you can dispense with the soaking action.
• Using a small brush, without removing from the water, the removed parts are cleaned.
• Large elements (cake and juice containers, pusher) are washed with a sponge with added dishwashing gel and rinsed with clean water. Stubborn dirt may be rubbed with a rag that has sunflower oil in it.
• Clean the separator with a brush under running water. It is easier to clean the holes in the filter with an infrequent bristle brush. If you do not have one of these, use an old toothbrush to make one, thinning the nap.
• Place the washed parts on a towel to dry.

Removable elements of the juicer are easier to clean than the main part with the motor. The surfaces of this component are cleaned by wiping them with a damp sponge or cloth. If there is a heavy encrustation which is difficult to remove with a damp cloth, you can use the popular household cleaner citric acid or vinegar. These folk remedies will also help clean the refrigerator, clean the oven, remove limescale in the electric kettle and in caring for other appliances. Instead of acid the lemon juice will do, which can be pre-made in a juicer.

With the prepared solution for cleaning, based on vinegar or lemon, wash the surface of the juicer and remove plaque easier. The solution will cope well with heavy dirt on removable parts. After treating the removed elements with vinegar or lemon cleaner, rinse them again with clean water.

Stained plaque from beet and carrot juice can be cleaned with a composition based on baking soda. For this purpose, you need to dilute baking soda to a mushy state with lemon juice or vinegar. Apply the solution to the surface of the juicer and rub the resulting plaque with a sponge. Soda effectively removes dirt, which allows you to use this cleaner to clean the washing machine.

After washing and cleaning the component parts, it remains to assemble the juicer. All elements must be left to dry completely before reassembling.

Recommendations for juicer operation

It is much easier to take care of the juicer if you know a few tricks and tips.

• Wrap the container for the cake collection with a plastic bag. This will prevent the appearance of plaque on the surface and make cleaning easier.
• After making juice immediately need to dismantle and wash the juicer. Fresh dirt is easier to remove without the use of detergent.
• Do not leave even the slightest bit of dirt on the juicer surfaces. Over time they form a deposit that is harder to clean.

Using the above tricks, tips and recommendations, cleaning the surfaces of the appliance will become easier. Folk remedies are good to wash the juicer and remove the plaque.