How to reflash the Xiaomi vacuum cleaner into Russian through iOS
Xiaomi Mi Robot Vacuum (Roborock Gen 1 (V1)/Gen 2 (S50/51/55)/GEN 3 (1S/S6/T6/S5E (MAX)/S6 Max V/S7)). firmware and linguistic bags Xiaomi Mi Robot Vacuum 1 generation “| Xiaomi Mi Robot Vacuum 2 generations “| Xiaomi Mi Robot Vacuum 3 generations “| Buying “| Mihome app “| Firmware and language packages “| Xiaomi Club “| Selection and comparison of vacuum cleaners
If the name of your robot is not in the first line of this topic, then it means you on another topic. This topic discusses only the process of firmware that arise problems and undocumented use of capabilities as a result of rooting. Xiaomi Mi Robot Vacuum-Mop (1C) You can’t flash in this topic, profile topic: link. For MOP Essential (Styj02YM) Link. For Xiaomi Mijia G1 Sweeping Vacuum Cleaner (Mop Essential Mjstg1).
The Xiaomi Mi Robot Vacuum robot is equipped with a low-noise, raw motor supplied by the Japanese company NIDEC. The fan gives maximum pressure in as many as 1800 Pa, which provides greater power when working with hard mud.
Mi Robot Vacuum is also equipped with three processors: the Allwinner quad.core processor, the STMICROELECTRONICS ARM accomplices and the Texas Instruments LDS image processor. The trio helps the vacuum cleaner receive data in real time from placers from 12 different types of sensors (sensor for determining the distance LDS, ultrasonic radar, distance sensor to the wall, sensor of large mud, fall sensor, gyroscopes, accelerometers, and so on). Laser range finder and ultrasonic radar scan the surrounding robot space for all 360 degrees with the frequency of measurements 1800 times/s. This technology is similar to the one that we can see in modern unmanned vehicles.
The built.in battery with a capacity of 5200 mAh is made up of a high.capacity battery of 18650 from LG and Panasonic and guarantees 2.5 cleaning from one battery charge.
Как разобрать Xiaomi Mi Robot Vacuum Cleaner инструкция How to disassemble vacuum Cleaner
- Attention! Parties with new firmware (4004 and above. for the first generation, 1910 and above. for the second generation) in the recovery section, you do not have the opportunity to put custom firmware on such robots.
- In the new audits of the second generation of robots released from 03.2019, as well as in firmware, starting with 02.2019, there was a check of the robot belonging to the region. That is, a robot for the Chinese market (in Russia, they are also often sold under the guise of a European one) no longer works in Russia. It does not give yourself to flashing.D.
Cash firmware: Important: both versions of the robot are stitched the same way, that is, all the firmware instructions are suitable for both versions! For 3 generation only off. packages through Mikhum mods or directly from the XVacuum Firmware smartphone
Question/ Answer: B: Why? A: After receiving the ROOT rights, you get a full Ubuntu distribution inside the vacuum cleaner. What to do with it decide. After that, only your fantasy limits the capabilities of the vacuum cleaner, and, accordingly, the ability to work with Ubuntu.
For the first version: full runoff (version 3532) with a route, entrance by SSH, login and password Cleaner, after entering you can/you need to change the password to your own using the Passwd V11_003532 command.Fullos_root.PKG.
- Full stock (version 3.3.9_003514) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
- Full stock (version 3.3.9_003506) with a route, entrance by SSH, login and password Cleaner, after entering you can/you need to change the password to your own using the Passwd command.
- Full stock (version 3.3.9_003416) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
- Full stock (version 3.3.9_003254) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
- Full stock (version 3.3.9_003194, starting with this version, zonal cleaning appeared) with a root, entrance by SSH, login and password Cleaner, after entering you can/you need to change the password to your own using the Passwd command.
- Full stock (version 3.3.9_003132) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
Modified firmware ——————— Now zonal cleaning and sending to a certain point officially works in the Mihome native plugin, no more manipulations.
For the second version: Due to the appearance of regional blocking in the second generation of the robot, use modified firmware
- Full runoff (version 001792) with a root, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command
- Full runoff (version 001780) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
- Full runoff (version 001632) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
- Full runoff (version 001518) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
- Full runoff (version 001414) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
- Full runoff (version 001408) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
- Full runoff (version 001344) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
- Full runoff (version 001228) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
- Full runoff (version 001168) with a route, entrance by SSH, login and password Cleaner, after entering you can/you can change the password to your own using the Passwd command.
Installation of a Russian voice package using a phone (Android)
Option with automatic definition of IP addresses and obtaining token.
Token-a unique identifier of the robot of the vacuum cleaner (after resetting Wi-Fi settings, it changes).
- Download and install the XVACUUM Firmware 4 program on the phone.0.0
- We download for example the official Russian language ru_official and unpack from the archive, as a result, the phone should have a file with the extension PKG
- We clamp on the vacuum cleaner two buttons for a few seconds until the phrase on resetting Wi-Fi settings will not sound (most likely it will be in Chinese)
- Further on the phone, it is advisable to turn off the mobile Internet and turn on Wi-Fi, in the list of available networks we should have a network from our robot to which we need to connect.
The second method implies the use of the capabilities of the Python-MIIO library, as well as the initial knowledge of such a programming language as Python 3.
A prerequisite for installation is LibFFI-DEV Libssl-Dev. This requires: “PIP3 Install.U Setuptools and PIP3 Install Python-Miio.
It is best to use the Mi Home application to receive devices tokens. It needs to be downloaded, installed and added to the list of devices used by our Xiaomi robot vertebrae.
If you are a user of a smartphone based on iOS, then perform the following actions:
- Creation of an unencrypted backup through iTunes;
- Its discovery, which will require software Ibackup Viewer. The function of viewing the file system (RAW Files) is selected, where you need to find Mi Home (COM.Xiaomi.mihome). From here the file “Figures_mihome.sqlite “;
- To open the extracted database, you can use DB Browser for SQLite, which allows you to find the ZTOKEN file;
- After the opening of the “terminal”, “Echo ‘0:’ | XXD.r.P | Opensl ENC.D.AES-128-ECB.Nopad.Nosalt.K 00000000000000000000000000000000 “.
The owners of gadgets based on Android will need to perform operations such as:
360 Robot Vacuum Cleaner C50-1 обзор. Недорогой робот-пылесос с Алисой
- Make a backup of the base »Adb Backup.NoAPK COM.Xiaomi.Smarthome.F Backup.Ab “;
- To extract data, you will need the ADB Backup Extractor tool “Java.Jar Android Backup Utilities/Android Backup Extractor/Android-Backup-Extractor-20171005-Bin/Abe.Jar Unpack Backup.Ab Unpacked.TAR “;
- Unpacking is carried out using “TAR.XVF Unpacked.TAR “;
- You can get a token (ZTOKEN field) by using DB Browser for SQLite;
- You can view the database manually, or you can apply a tool from the Python-MiIO library “Miio-Extract-Tokens”.
The third stage
A great option would be the use of ready.made scripts. We copy the script you like, for which you will need the DustCloud/Devices/Xiaomi folder.vacuum/audio_generator “. Editing the Generate_audio script.Py can be carried out by means of mac.
To amplifying amendments, use “84. OS.System (“Say.v.o “Path”.-DATA-FORMAT = LEI16@22050 “Text)”.
You can view lists of available votes in “Terminal”. “Say.v ?””.
If, after amending the Robot Pole, Xiaomi refuses to talk, t.e. Silent, it is recommended to check the audio files. They must have the same properties. If the parameters are varying, then you need to correct the scripts.
In the folder “./Language “You can find lists of phrases. Choose you like, change its name to “Audio_ru.CSV “and make our own changes with the subsequent launch of the script”./Generate_audio.Py “.
An interactive mode will be needed to select “Audio_ru.CSV “and TTS engine, resulting in an accessible document ru.PKG.
Its pouring a gadget from Xiaomi is carried out by using the Miro Install_Sound command./ru.PKG “. Just do not forget to fulfill in advance “Export Mirobo_token =” and “Export Mirobo_ip =”.
This is where the process of the reappeeling ends. Now your Xiaomi vacuum cleaner will “speak” in Russian, thanks to which you will understand everything that he will say.
How to set up through the application
The algorithm, how to configure the Xiaomi vacuum cleaner into Russian, includes the following simple steps:
- Conduct the connection of the Robot-Pole to Wi-Fui and synchronize the unit with the Mi Home application, which is the official utility of the Chinese manufacturer.
- Next, click on the icon of the Robot Permissy of the corresponding model.
- After clicking on the icon, the loading of the characteristics that a specific IROTOTLOT-PLAN of Xiaomi possesses will follow the icon. How to set up the Russian language, the function “Cleaning mode” will tell, according to the icon of which you should “swim” upward.
- In the opened extensed settings, all the functionality available for changing the functionality is presented by the Robot Palace of Setting the Russian Language is possible in the “Voice alert” item. After pressing this key, a list of available languages for a voice assistant will appear. Opposite the required option, click the “use” tab.
This is the easiest way with which you can change the functionality of the Xiaomi robot permissor. Setting up the Russian language will occur a couple of minutes after the changes. However, such an algorithm is not available to all models, most of them are supplied exclusively by English or Chinese-speaking. A little other actions will help here how to configure the Xiaomi vacuum cleaner into Russian.
Talking Robot Robles Xiaomi: how to install a language package?
Robots vacuum cleaners produced by the Chinese company XAIOMI are very popular among buyers. And this is quite understandable. Robots-sprayers can significantly save time and effort on the performance of daily parties. But, after the acquisition of such a device, updating or flashing is often required, including changing the linguistic voice package of the speaking robot of the vacuum cleaner. Installation of a Russian.speaking package will allow even more convenient and comfortable to carry out daily cleaning of the house or in the apartment. You can set up a robot vacuum cleaner yourself. In this article we will tell you how to make a voice acting a robot of a vacuum cleaner.
How to Russify the RAIIOMI vacuum cleaner robot.
Almost all models of robot percussions are equipped with built-in voice assistant. But, as a rule, Chinese is preinstalled on it. To change Xaiomi Mi Robot Vacuum Cleaner to change the speech, you need to sew a new language package into it. For this you need:
- Download language package and firmware on the phone. https: // goo-gl.SU/NPZL
- Then, for a few seconds, clamp the two buttons on the vacuum cleaner body until the sound signal appears. So the Wi-Fi network settings are reset.
- After that, on the phone, we find a Wi-Fi settings item and connect to the vacuum cleaner as an access point.
- We launch the firmware program, choosing a section of voice settings.
- Choose a predetermined voice package from the desired folder.
- Your robot is a vacuum cleaner.
Russian firmware Xiaomi Mi Robot Vacuum Cleaner
In order to flash the robot vacuum cleaner Xaiomi Mi Robot Vacuum of the first version, you need:
- Find and download a package for firmware with extension.APK so as not to look for a long time: https: // goo-gl.SU/NPZL
- To find out the token and the IP address of the vacuum cleaner, we install the XAIOMI vacuum cleaner in Russian: Mi Home on the phone. In the appendix we go to our account, select the application settings. information about the network
- Then we open the file with the settings of the application downloaded in paragraph 1. We are looking for Mirobot.ini and enter the values of token and IP addresses there
- You can proceed to the firmware of the robot permissive vehicle on the ROOT Rights. To do this, open the file with the extension.Bat. In the opening window, the number 1 is pressed (referring to the first firmware) and Enter. The download duration can be about 6-7 minutes.
- We sew in Russian to make a robot vacuum cleaner. Talking in Russian. To do this, press the number 2 and Enter, then select the desired voice bag and press Enter again. At the end of the load (waiting time. about 20 seconds), the vacuum cleaner gives a sound signal.
- Your robot vacuum cleaner says.
Important: the charge of the battery of the vacuum cleaner robot should be more than 20%
Automatic definition of IP addresses and token obtaining.
- Download and install the XVACUUM Firmware 4 program on the phone.0 download the program here.
- For example, download the official Russian language ru_Official and unpack it from the archive, as a result, a file with the extension PKG should be on the phone.Other voice packages for Xaiomi can be downloaded here
- For a few seconds, clamp the two buttons on the vacuum cleaner body until the sound signal appears. So the Wi-Fi network settings are reset.
- On the phone you need to turn off the mobile Internet and turn on Wi-Fi. In the list of available networks, we should have a network from our robot to which we need to connect.
Manual input of IP addresses and token
- Download and install the XVACUUM Firmware 3 program on the phone.3.0
- You will need to install the modified Mi Home Vevs on the phone, through which you can see the IP address and token. If Playmarket was used before, then Mihome from Playmarket, then it will need to remove it.
- For example, download the official Russian language ru_Official and unpack it from the archive, as a result, a file with the extension PKG should be on the phone
- Open Mi Home Vevs, add a vacuum cleaner there, click on it. A card with a room and information about the previous cleaning and charge will open. In the upper right corner we are looking for three points. Click on them and select: General settings. additional settings. Information about the network. So we will see IP and a vacuum cleaner token. We copy the token, and write the IP address to the sheet.
- Open the XVACUUUUM Firmware application and click on three horizontal stripes in the upper right corner, we will open the menu in which we select settings.
- In the IP field we enter the IP address of our vacuum cleaner, which was recorded in the previous step, and in the TOKEN field we insert token copied from the modified Mi Home application and click on the Save button.
- Restanates Appendix Xvacuum Firmware
- The Flash Firmware and Flash Sound buttons should become active, now we will be interested in the Flash Sound button. Click on it.
How to install Russian on a vacuum cleaner Xiaomi Mi Robot Vacuum Mop and Mop P
Xiaomi Robo-Placels love all over the world. Out of the box, they voice their actions in English. Today we tell you how to install Russian on the detergents of Xiaomi Mi Robot Vacuum Mop and Mi Robot Vacuum Mop P.
First connect the Xiaomi Mi Robot Mop or Mi Robot Mop P to the smartphone using this instruction. Next, click on the vacuum cleaner icon in the main application menu.
After loading, you will get into the initial menu and see the “cleaning mode” item from below.
Spend your finger from him to open additional settings.
Here, the absorption power and intensity of water supply are available here, but you need a “voice notification” item.
Then the list of available voice acts will open. Click on the key to “use” opposite the language you are interested in.
In a couple of seconds of waiting, the language will be applied.
Now your vacuum cleaner Xiaomi Mi Robot Vakuum MOP or MOP P will speak with you in the same language.
Possible problems and how to solve them
In principle, any problems should not arise if you clearly follow the above instructions for setting up a robot permissive. But Mi Home is not the most “stable” program, according to the reviews of the users themselves. She often freezes or stops working right during the configuration, conjugation of the robot with a smartphone. There is nothing critical about this, but the user should know what should be done in a particular situation:
- If the firmware (both using the phone and PC) ends with an error, then in most cases the banal rebooting of the vacuum cleaner helps. That is, it is enough to turn it off and turn it on using the button on the case itself.
- If, when using a PC, the Win-Mirobo program immediately closes after starting, it is recommended to check the network settings and add the Wi-Fi connected to the home network. Otherwise, it involves a firewall, which blocks the exchange of data with “unknown” devices, for connecting to which it is not required to enter a password.
- After some time, the settings of the installed vocal package are dropped to factory or notifications simply not played. This happens only after the wi-fi of the Robot Perman is reset. Sometimes. after updating the firmware through Mi Home. In this case, it is recommended to re.flash it again.
Total, Russifying a Robot Veswell from Xiaomi is quite simple. It is convenient that the XVACUUUUUM Firmware and Win-Miro allow this even if the equipment is released for sale in the Chinese consumer market (they are bought, as they are cheaper than “global” versions). The whole procedure takes only 5. 10 minutes.
How to install Russian on the Xiaomi Mi Robot Mop p robot vertebrae
Robot spools became indispensable assistants in maintaining the purity of the house. But initially they use English. Previously, I had to counter the devices to change the language on the vacuum cleaner. But now Xiaomi has implemented such an opportunity in the Mi Home company application How to establish Russian voice acting on vacuum cleaners Xiaomi Mi Robot Vacuum Mop or Mi Robot Vacuum Mop P.
The first step is to connect your vacuum cleaner. How to do this, read here. Then in the application, click on Mi Robot Mop or Mi Robot Mop P.
Then you will find yourself in the initial menu for interacting with the Xiaomi detergent vacuum cleaner.
You need to stretch up from the point “mode” upward.
Here you can adjust the absorption power or water supply. To change the language, click on the “voice notification”.
In the list that opens, click on “use” next to the Russian language.
After a few seconds, the setting will be activated.
And your Xiaomi Robot Robot Vacuum MOP will communicate with you in Russian.
Possible problems with installation and how to solve them
When connecting a robot permits to a smartphone, some problems may occur. Consider the decision of the most common of them:
- “The connection is not established”. The reason for this may be problems with Wi-Fi compound. In this case, you need to change DNS. To do this, go to Wi-Fi settings, open the “network properties”-“change the network”-“additionally”-“user” and change the specified DNS to 184.108.40.206.
- When installing the Mihome application on the iPhone, the traffic of your region may not be read by the application. To solve the problem, go to “Profile”. “Settings”, click on the “Region” item, and then select “India” or “China” as the region.
- No connection to the phone. Perhaps the server does not see traffic from the device. To do this, install the Orbot VPN application and similar. After a successful connection of the VPN, you can disable.
What to do if a robot vacuum cleaner with Chinese voice acting? There are a lot of different solutions on the Web on how to put voice acting on the Xiaomi robot vertebrae. These are mainly tips for installing hacking applications, custom firmware and control through Crack for. However, this threatens that when trying to install the update, the device may completely fail. Therefore, it is better to refrain from buying a Chinese version of the robot permissive.