Home Article How much does the section of the Soviet cast -iron battery weigh
Article

How much does the section of the Soviet cast -iron battery weigh

How much is a cast.iron battery

Now it has become obvious how the weight of the battery from cast iron popular among consumers of the series. But the characteristics of the original devices differ in relation to the cost and mass.

For example, one section of a three.channel floor.made French.made heating device Guratec Apollo 795 weighs 13.5 kilograms. The product is demonstrated on sale with 7-sequent batteries, the total weight of which is 94.5 kilograms. When transporting it, unloading and installation, several employees will need the help of.

much, does, section, soviet, cast, iron

Foreign radiators before implementation in domestic markets should undergo a procedure for mandatory certification regarding the compliance with the GOST, but at the same time the weight of the part is not taken into account

The advantages of cast iron

If we do not consider how much a cast.iron battery weighs, you can note a whole range of advantages of heating devices of this type, which include:

  • Corrosion resistance;
  • Resistance to chemically aggressive environments. the material is undemanding to the characteristics of the coolant;
  • durability;
  • high heat radiation indicators. the larger the number of sections, the higher the heat transfer of the heating device.

The appearance of standard cast iron batteries is simple and concise, but today manufacturers also offer radiators made under the old days. The advantages of such models include a stylish and respectable appearance.

Various options for radiators

Specifications

Heating power power is an indicator of its heat efficiency. When calculating the heating system, the needs of the house in the heat are taken into account

It is important to know the power of the 1st section of the cast.iron radiator to determine the size of the batteries for each heated room. Incorrect calculations lead to the fact that the room will not warm up qualitatively or vice versa. you will have to often ventilate it, removing excess heat

In an ordinary standard radiator of cast iron, a power of 1 link is 170 watts. Cast iron batteries withstand heating over 100 ° C and successfully function at a working pressure of 9 atm. This allows you to use this type of product as part of central and autonomous heating networks.

How many PUBG Cast Iron skillets does it take to stop a bullet?

Modern models

Manufacturers offer lightweight options for gray cast iron batteries. If the weight of 1 link of the Soviet radiator MS140 is 7.12 kg, then 1 section of the Viadrus Styl 500 Czech production model weighs 3.8 kg, and its internal volume is 0.8 liters. This means that the Czech radiator of 10 links filled with the coolant will have a mass (3.8 0.8) × 10 = 46 kg. This is 40% less than the mass of the filled battery of MS 140, consisting of a similar number of elements.

Cast iron heating devices of a lightweight model are also produced in Russia. Under the EXEMET brand, Modern batteries are available, 1 section of which weighs 3.3, and its internal volume is 0.6 liters. These tubular cast.iron radiators are characterized by relatively low heat transfer, which requires an increase in the number of links. Heating devices are designed for the floor installation.

much, does, section, soviet, cast, iron

Vintage radiators from cast iron are popular with growing popularity. These are floor models made using art casting technology. Due to volumetric complex patterns, the weight of the cast iron radiator section is significantly increased, it reaches 12 or more kilograms.

See also  Air humidifier that does not flow

Cast iron vintage floor radiator

Life time

In houses built before the revolution, cast iron radiators are still working, installed more than 100 years ago. Modern heating devices from this material are also designed for decades of unconscious operation.

Durability is explained by the strength of cast iron, resistance to heating and pressure. Cast iron heating devices do not rust during the period when the coolant and the inner surface of the batteries are in contact with the air from the network.

Dimensions

The weight of the section of the cast.iron radiator depends on its height, configuration and wall thickness.

Manufacturers offer models with various characteristics:

  • The depth of the battery is from 70 to 140 mm in standard performance;
  • The width of the link varies from 35 to 93 mm;
  • Section volume. from 0.45 to 1.5 liters, depending on the dimensions;
  • height heating device in standard design-370-588 mm;
  • Intercessor distance. 350 or 500 mm.

Foreign cast iron radiators

Cast iron batteries of foreign production are made in modern or retro style. The latter have greater weight due to inlay and artistic elements. As a rule, they have the ability to install on the floor.

Demrad Retro (Turkey)

When taking into account the mass of a cast.iron radiator, you should not forget about additional loads. taps, plugs, pipes. If the battery is located far from the riser, the mass of the pipe with water can provide a significant additional load.

How much does one section of an old.style cast.iron battery weigh

Despite the creation of a huge number of new generation heating batteries from various modern materials, cast.iron batteries are still able to compete with new models.

To find out how much the cast iron battery weighs, you need to pay attention to the manufacturer of heating radiators.

Spider-Man: Far From Home (2019). Zombie Iron Man Scene (6/10) | Movieclips

Everything new is well forgotten old

How much does a non.standard battery of cast iron weigh

Now it has become clear how the weight of the cast.iron battery of the series common among consumers. But the characteristics of non.standard devices vary relative to the cost and mass.

much, does, section, soviet, cast, iron

For example, one section of the three.channel floor radiator of the French.made Guratec Apollo 795 weighs 13.5 kilograms. The product is presented on sale with 7-sequent batteries, the total weight of which is 94.5 kilograms. When transporting it, unloading and installation, several employees will need the help of.

The Czech manufacturer Viadrus makes a more affordable product. The weight of the section of the radiators from the cast iron alloy Kalor 500 × 160 is 5.6 kilograms.

much, does, section, soviet, cast, iron

Foreign heating devices before implementation in domestic markets should undergo the procedure for mandatory certification regarding the compliance with the GOST, but at the same time the weight of the section is not taken into account.

Modern heating radiators from cast iron

For wall mounting, there are new products from gray cast iron from various manufacturers, whose mass is much less than traditional MS 140. For example, the Czech heating radiator Viadrus Styl 500, shown in the figure.

Its characteristics are as follows: mass 1 section. 3.8 kg, capacity by water. 0.8 l, the total comes out 4.6 kg. With a located heat flow of 140 watts, a 20 m2 will require 14 pcs on our room, which will be 64 by weight.4 kg with water. This indicator is 40% less than that of MS 140, and dividing it into 2 parts (32 kg each device), it becomes clear that it is possible to install cast.iron radiators on walls of porous concrete without special additional inventures. An even lighter design is offered by a Russian manufacturer selling its heating devices under the EXEMET brand, namely Modern model.

See also  How to drain the boiler ferroli

Here one section of the radiator weighs only 3.2 kg during heat transfer 93 watts, 22 sections with a total mass of 70 are required in the room of 20 m2.4 kg. This indicator is also quite good, especially if you consider that the company makes these batteries with the possibility of flooring.

It is impossible not to say a few words about a product such as a vintage cast.iron battery, whose weight is even more than the Soviet MS 140 and in some cases reaches 14 kg. These heating devices with their appearance resemble ancient, installed in residences and estates in the distant XIX century.

The Exemet Fidelia model depicted in the figure has a weight of 12 kg with a heat transfer of 156 watts, which makes the total weight of a cast.iron radiator for our example is simply monstrous. 154 kg. But as can be seen in the image, here the installation issue is solved differently: the first and last sections have the legs for placing the heater on the floor.

How much does one section of the cast.iron battery weigh?

The standard section of the cast.iron battery weighs 7.5 kg. You can interconnect them as much as you like, usually installed from 4 to 24 sections together. A larger number of sections may simply not withstand the wall mount. The more sections there are in the battery, the higher its heat transfer will be. When filling one radiator section, 4.2 liters of water are placed in it. The heat transfer of the cast.iron battery is calculated based on the temperature of the water in the heating device and the temperature of its surface. According to the standards, it should be at least 90 degrees Celsius in the heating system, the radiator surface heats up to 70 degrees Celsius.

Knowing the weight of one radiator section, you can calculate the weight of a cast.iron battery consisting of more sections. For example, the weight of a battery of seven sections will be fifty kilograms.

The heat transfer of the heating device is calculated in this way: the heat efficiency of one radiator section is multiplied by their number in the heating device. The indicator such as the useful area of ​​heating is very important is also very important. The cast.iron radiator has a shape in which the heating surface is quite extensive, which increases the heat transfer of the entire device. ribbed batteries with a small surface can produce a heat transfer coefficient of not more than 0.23 kV. meters from the surface of the entire heat source.

How radiators are produced?

Since the appearance of the first cast.iron heating device, in the production technology there has changed a little. All modern radiators are made by casting casting method. Since the shape of the battery has changed over time, its adjustments were also made to the production process: the radiator began to be made by the heartfelt. After casting, finished products are collected at the factory. Each section is fastened with the subsequent, using threaded nipples. Therefore, if a leak occurs in the radiator, then it occurs most often either at the place of attachment of the device to the heating system, or at the threaded junction of individual sections.

The number of sections of radiators can be different, depending on the manufacturer. Caulogs manufactured by the Czech Republic are produced by ten sections, radiators of the Lugansk Foundry and Mechanical Plant of the MS140 Four and Semey. Cast iron batteries in the USSR were very popular. Thin steel radiators, although it were much easier, but often could not cope with the heating room, leaked and flooded neighbors. If a cast.iron radiator was installed in the room, then such a room was the warmest place in the house. Therefore, having taken up the repair, Soviet citizens tried to change heating devices to cast iron, taking out a scarce product. In many apartments, despite the large selection of modern heating devices, cast-iron batteries, as before, the owners have very “warm” relations with them.

See also  The boiler does not warm the water in the tap

Unlike metal “counterparts”, cast iron radiators were distinguished by another obvious advantage: it was convenient to paint them. Each owner of the living space in an apartment building, at least once, faced the problem of painting batteries. The plate and tubular radiators required annual update, and coloring them was very uncomfortable and long. With cast.iron radiators, the painting process was much faster, since they did not have “tricky” forms and small details. From the plant, heating devices were supplied with grouped, so you could choose the color of the paint and paint the surface of the battery to your own taste.

It was not easy to install a cast.iron battery to one person. It was not the difficulty of connecting, in order to raise and hold a cast.iron radiator, at least the effort of two people was required.

Modern heating radiators from cast iron

For wall mounting, there are new products from gray cast iron from various manufacturers, whose mass is much less than traditional MS 140. For example, the Czech heating radiator Viadrus Styl 500, shown in the figure.

Its characteristics are as follows: mass 1 section. 3.8 kg, capacity by water. 0.8 l, the total comes out 4.6 kg. With a located heat flow of 140 watts, a 20 m2 will require 14 pcs on our room, which will be 64 by weight.4 kg with water. This indicator is 40% less than that of MS 140, and dividing it into 2 parts (32 kg each device), it becomes clear that it is possible to install cast.iron radiators on walls of porous concrete without special additional inventures. An even lighter design is offered by a Russian manufacturer selling its heating devices under the EXEMET brand, namely Modern model.

Here one section of the radiator weighs only 3.2 kg during heat transfer 93 watts, 22 sections with a total mass of 70 are required in the room of 20 m2.4 kg. This indicator is also quite good, especially if you consider that the company makes these batteries with the possibility of flooring.

It is impossible not to say a few words about a product such as a vintage cast.iron battery, whose weight is even more than the Soviet MS 140 and in some cases reaches 14 kg. These heating devices with their appearance resemble ancient, installed in residences and estates in the distant XIX century.

The Exemet Fidelia model depicted in the figure has a weight of 12 kg with a heat transfer of 156 watts, which makes the total weight of a cast.iron radiator for our example is simply monstrous. 154 kg. But as can be seen in the image, here the installation issue is solved differently: the first and last sections have the legs for placing the heater on the floor.

Author

Laidred

| Denial of responsibility | Contacts |RSS