Home Small appliances Hide the corrugation from the hood in the kitchen
Small appliances

Hide the corrugation from the hood in the kitchen

Methods of masking pipe from hoods: Useful tips on decor and installation

Hide the corrugation from the hood in the kitchen in several ways. in a multi.level ceiling made of drywall, inside the upper cabinets, behind a stretch ceiling or in a plastic box.

No modern cuisine can do without hood. This device provides high.quality air purification in the room, saving it not only from unpleasant odors that form during cooking, but also from particles of fat, soot and other pollution. Installing the hood requires certain knowledge and a competent approach, while the equipment should not only work properly, but also successfully fit into the interior, harmonizing with the surrounding details. Therefore, before the installation of the product, you need to think about how to hide the pipe from the hood so that it does not spoil the appearance of the room.

To date, stores of household appliances offer two types of hoods:

The first option requires the presence of a duct through which the device will connect to the ventilation shaft using a pipe. Circulation models do not need to lead to ventilation, but work due to air purification using filters. They have a diverse design, but in care is much more labor.intensive than running, as they need to regularly replace filters.

Five options for masking an exhaust pipe

When installing a running hood, it is important to provide options for how to hide the duct so that the pipe does not spoil the impression of the style of the kitchen. The sleeve is decorated using various materials and technologies. A number of requirements are presented to masking structures:

  • aesthetics and presentable appearance;
  • resistance to elevated temperature regime;
  • moisture resistance;
  • resistance to chemical effects and ultraviolet light;
  • Easy to care and maintenance.

Working on the task of how to hide the corrugation from the hood in the kitchen, it is worth considering that the masking structures are also designed to help reduce noise from the electric motor of exhaust equipment.

Plastic box

The easiest way to hide the duct in the kitchen using a plastic box, if the distance between the hood and the entrance to the ventilation shaft does not exceed 3 m. A huge assortment of current products is presented on the profile market, vary in an affordable segment. The design is easily mounted: plastic boxes are produced in the finished form, and it is not required to waste time assembly.

Gypsum cardboard box

The solution will successfully fit into any interior and attracts the variability of execution. A drywall box is placed vertically with a mount to the wall or a horizontal structure is built in the space between the ceiling and the upper perimeter of the kitchen set. In order not to violate a single style solution of the interior, the surface of the box is finished with the appropriate materials.

We build in a kitchen set

To hide the corrugation from the hood inside the kitchen, in the project of the furniture composition, hanging cabinets with special communications for communications are provided. The sleeve takes a little space in the module, the rest of the space is used for its intended purpose as part of the storage system of kitchen utensils.

hide, corrugation, hood, kitchen

Decoration

The budget method of masking the exhaust pipe is painting. To do this, choose colors in the style palette of the kitchen. The air duct’s decor with the help of coloring trains is a priority among those who are not interested in significant costs for the arrangement of kitchen equipment.

Stretch ceiling

Systems of stretch and hinged ceilings are also in demand as structures that hide an exhaust pipe in the kitchen. Tile and panel solutions are relatively inexpensive, most often they are carried out without involving specialists. If necessary, maintenance and repair of communications inside the suspension system, the corresponding surface sector is dismantled, after planned measures, the panels are inserted back.

Professional equipment is required to install a stretch ceiling, this is reflected in the total cost of work. In addition, to access the duct, which is hidden under the ceiling system, you will have to disassemble the tension coating, which is fraught with additional expenses.

Varieties of hoods and structural features

Each of the species has its own advantages and disadvantages, which we will consider further.

The workflow of the circulation system does not provide for the air vent in it. Polluted air undergoes thorough filtration using fat.linked and coal complexes (filters), and then returns back already in a purified form. The demand for the exhaust circulation system for the arrangement of the kitchen space is due to a large number of competitive advantages,

Kitchen Rangehood Ventilation Solutions

  • When installing an air exchange circulation system, it is not necessary to think about how best to hide the pipe from the exhaust system in the kitchen. The device will work autonomously, and the functionality will not be connected to the ventilation shaft of the building, and the duct is not provided for.
  • Hon surfaces can be installed anywhere in the kitchen, regardless of remoteness to circulation exhaust.

But among the shortcomings of the operation of circulating devices, it is worth highlighting the following:

  • The equipment will be implemented only in an expensive segment, economy options simply do not exist.
  • It is required to replace the filters from time to time, and this will assume additional expenses.
  • Relatively complex care and maintenance.

In addition, due to its own ergonomicity, the structure will fit perfectly into the interior and harmonize with the kitchen set, as well as other furniture; Problems of violation of kitchen aesthetics will also be excluded.

The principle of operation of this type of device is to completely remove the air polluted and other air from the kitchen room through the ventilation channel. The flow types of hoods must be connected by the ventilation shaft using an air vent. The sleeve should be made of plastic pipes, and corrugation corrugation or galvanized steel. To understand how to successfully mask the exhaust system and its components in the kitchen, we suggest you familiarize yourself with the collection of photos of decisions ready and selected by designers.

How to close corrugation in the kitchen? First, consider the fact that sometimes pipes are also used instead of corrugation. It can be highlighted that plastic pipes for ventilation can be round and rectangular cross.section. The second design option will easily fit into the design of the headset in the kitchen, and there will also be no difficulties with surface decoration for the general style direction of the interior. At the same time, the air duct from the PVD with a round section provides for a small level of resistance, and this will give high efficiency of the fence of contaminated air.

When planning an exhaust system using pipes from PVC, you should definitely make all the necessary calculations, taking into account what the complexity of the contour will be. The corrugations are good in that they are very easy to install. one end of the aluminum corrugation should be fixed on the hood, and the second is connected to the entrance to the ventilation shaft on the wall. The system will include many adapters, and clamps with bolts can be used as an element of fastening. Galvanized pipes, as an alternative version of the aluminum sleeve, have a perfectly smooth surface, and also have resistance to corrosion.

Such equipment is very in demand as an effective and very affordable option for air removal, but it is worth disguising the corrugation from the hood in the kitchen space, because outwardly it is completely unpresentable and will be significantly reduced by the aesthetics of the interior.

Corporal for hoods: dimensions of plastic and aluminum models for the kitchen, which diameter to choose when installing

Most of the repair work can be carried out with your own hand. Connecting the hood to the ventilation system can be attributed to such cases. Even a person with minimal experience can master this process. This is especially true when the role of the duct is performed by corrugation for hoods made of aluminum. No special knowledge for this variety of building materials is required.

Classification and scope of application

The corrugated pipe is present in the construction market in various modifications. It can be small in diameter models of various colors made of plastic. You can also detect a stainless steel codium.bellied corrugation, which is considered the most reliable in use. Each buyer can choose products, focusing on the following parameters:

It is difficult for an inexperienced home master to immediately choose such an option that will solve the problems that arise. The corrugated pipe is a very useful element for the formation of an exhaust ventilation canal. It contributes to a faster and easier performance of installation work.

It is necessary to deal with the purpose of this product and the main species that exist on the market to choose the right option. If you hurry, you can purchase the wrong version of the pipe that will fit into the interior harmoniously.

Causes of demand

The corrugation is very popular and in demand, as it has a lot of functional characteristics. It is actively used by builders because she:

The main ones are the round and rectangular shapes. The first option is advisable to use for a kitchen hood. As for the materials, you can most often find products from such materials:

  • of stainless steel;
  • aluminum;
  • galvanized steel;
  • on a textile basis;
  • from polyvinyl chloride;
  • from low and high pressure polyethylene.

The scope of use of the object is directly determined by the diameter and type of material.

Varieties of materials

To mount household ventilation, it is advisable to use stainless steel products or aluminum. It should also be indicated that corrugated pipes are divided into spiral-naval and frame, in accordance with the methodology of their manufacture.

hide, corrugation, hood, kitchen

The second type. aluminum corrugation for extract. in its appearance resembles a metal frame, which has a foil or a polymer film on the surface. Such objects are considered to be the category of flexible air ducts.

They have the ability to return the original form, not subjecting to deformation, even when the corrugation was extended in its entire length.

Frame products are made from iron ribbons. They are flexible by only 50% and are able to stretch 2 times. However, after that it is impossible to return the original appearance to them. To provide the necessary form, you need to make maximum efforts, and you cannot do without defects without defects.

Many companies today offer to buy flexible corrugated pipes with thermal insulation and without it. In the first case, it is possible to increase the sphere of use of products. Four.layer flexible pipes are used to lay indoors and beyond its ventilation routes. In addition, the distance of particular importance here does not.

Photocatalytic air purifier

Features of use

Corrugated pipes are available in a wide range. But they all differ in material and dimensions, which indicates a wide sphere of operation of this facility.

Flexible half pipes having a small diameter are made of plastic. They are used in full swing to lay an electric cable.

In this case, you can equip a channel for telephone wires. for this, electricians traditionally use corrugation, the diameter of which varies from 1.6 to 4 cm.

Corrugation, which is flexible half, is a suitable option for installing a heating system. In reality, it is this type of pipes that lends itself to a simpler installation. Any fragment here can be removed without violating the inner diameter. Accordingly, you can bypass various kinds of problematic areas when installing. It can be angles, for example.

For ventilation systems, a flexible corrugated pipe for hoods is recommended. To equip household ventilation, it is advisable to use products from 10 to 15 cm across.

Sometimes there are cases when it is necessary to install an object with a diameter up to 30 or more centimeters.

Such dimensions of the corrugation for hoods cannot be considered chassis, but it will be possible to detect the appropriate option in any case.

Flexible corrugation for ventilation in the kitchen is made of aluminum foil. A stainless steel model and plastic corrugation for hoods is much less common. Simplicity of installation explains the demand for this design. The cost can also be called reasonable. It is fully consistent with the expectations of buyers regarding the specified goods.

Channels made of textiles are used in production zones. They are arranged in such a way that they provide the optimal speed of air movement.

Such ventilation systems are used on meat processing workshops, in catering establishments and other rooms. Fabric models are convenient in that they can be quickly dismantled.

They are also easy to clean and disinfect.

To connect plumbing, bring water to a dishwasher or washing machine, you can use corrugation of polyethylene or plastic. Monting the sewer, without this material it will also not be possible to do. It is especially in demand in complex areas where there is no way to use hard designs.

Features of the installation of a plastic ventilation box

Installation of a plastic duct for extracts is carried out in several stages, including the design part and directly installation.

Development of a scheme. In order to correctly calculate the required number of elements of the air vent, it is necessary to draw up the installation circuit of the ventilation duct. The variety of elements of the plastic structure allows you to perform almost any variation of the box. In order for the hood to work in normal mode, the following conditions must be met:

Chimney Hoods Measurement Guide | ao.com

  • Reduce the length of the box as much as possible, since when lengthening, the intensity of the excretion of the air flow is lost;
  • use the minimum number of installation elements that contribute to a change in the air flow trajectory (narrowing, bends, etc. D.), since they increase resistance;

Plastic ventilation box with dimensions

  • Refuse the design of the structure by 90 °. Such sites increase the resistance as much as possible and contribute to sticking in these places of pollution particles;
  • Remove the box from the heating riser. If this is not possible, then it must be insulated so that the temperature of the device does not exceed 50 ° C. Insulating material will contribute to the suppression of noise;
  • According to the developed scheme, an exhaust box is collected.
hide, corrugation, hood, kitchen

Installation of a check valve and grille. Valve. a mandatory element of ventilation. In its absence, the air will simply return to the room. It is installed at the end of the air vent. It is supplemented with a grill and is equipped with a net so that small animals, birds and insects do not get into the ventilation system from the street or from the common mine into the ventilation system.

Placement and fixing of the air outlet. The method of its fastening directly depends on the placement of the box. If the product is mounted in a cabinet, then it should be attached to the rear wall using clamps. The box laid over the cabinets can be fixed to them through holders and self.tapping screws. Fixation to the wall or ceiling should be done with the help of holders and clamps and place them with an interval of at least 70 mm.

Tightness control. When assembling a plastic ventilation canal, it is necessary to ensure that all joints are adjusted, there are no cracks and gaps. Checking the box for tightness before the start of operation is impossible, so the mistakes made can result in the penetration of contaminated air into the room and the noise increase.

When installing, it is necessary to clearly fit all the joints so that the design becomes absolutely tight

Special elements used in installing boxes for hoods in the kitchen

The kitchens of private households and apartments have a different layout, which sometimes seriously complicates the installation of the ventilation system. In such situations, you cannot do without special elements. Traditionally, ventilation ducts are direct parts of a round or rectangular (square) shape. The length of these products is 35, 50, 100, 150 and 200 mm. If necessary, using a hacksaw, you can saw off a segment of the desired size. When there is a need for a length of more than 200 mm, an element of several standard products is mounted using a connector for plastic. The connector is located so that at its expense the total length does not increase.

Quite often, during installation, it is necessary to make a turn of the air outlet. This usually occurs in cases where you have to go through the ledges. For these purposes, the so.called knees are used. The rotation angle can be 45 and 90 °. The direction is changed horizontally and vertically. For situations where the rotation angle is not painted 45 °, multi.sided knees are used. The required degree of rotation is achieved by cutting one of the sides of the connector.

If you need to make a ventilation box with a turn, then special knees are used for this

If it is necessary to change the shape of the box from a rectangular (square) for round (and vice versa) adapters for hoods are used. Often an arising problem, solved by applying adapters. a rectangular box must be attached to a round hole in the hood. These elements are produced by both direct and angular shape. Standard indicators. from diameter 100 mm to size 110×55 mm; from a diameter of 100 mm to size 120×60 mm; from diameter 125 mm to size 204×60 mm.

All of the above elements are used exclusively for plastic products. The technology for installing metal boxes for hoods is completely different. Compounds are made by welding or gluing using a special composition.

How to hide in boxes from various material

Creating a masking gypsum.plated box in the kitchen is the most popular method that allows you to hide the pipe from the hood. It is easy to make it yourself or order from professional installers. The main differences in the boxes are in the materials used. It is worth considering in more detail the popular varieties.

Gypsum cardboard box

Of the materials and tools you will need:

  • Large knife for cutting linoleum;
  • Metal guides;
  • Fasteners;
  • electric screwdriver;
  • Self.tapping screws;
  • Putty;
  • Putty knife;
  • Materials for decor.
  • The area of ​​the future corps of the box is measured, its geometry is drawn. The size of each segment is calculated.
  • Places are planned for attaching guides.
  • Parts of the gypsum cardboard box case are cut out.
  • From the guides, a metal frame is formed, which is attached to the ceiling or to the wall with self.tapping screws.
  • A pipe or corrugation is started in the frame even before the box begins to sheathe. The elements of the air duct are attached with fixed rails and screws so that they do not play.
  • To sheathe the structure, the side parts of the box are attached with self.tapping screws. Check the level of all boxes of the box and compare it with the level of the frame itself. No part should protrude, and all gypsum plasters of the box of the box should fit tightly to the guides. This will make it possible to quickly and perfectly hide the seams.
  • Install facing panels. The corners and seams should be joked tightly and evenly.
  • All seams are treated with fine sandpaper, then they sweep away all the dust.
  • The entire structure of the box is putty. For greater reliability, you can apply a gypsum putty in several layers, having previously allowed to completely dry each previous.
  • The box is glued with a self.adhesive film, or a different method of decor is used. This method will help close the pipe from the hood in the kitchen with the exhaust device itself.

Such a box in the kitchen will last a long time, while the cost of all materials is quite small. The most difficult stage in the entire process is the correct attachment of all segments of the box body in dense joints.

Metal box

For a metal box, it is best to use stainless steel. The material is flexible, durable and has a pleasant appearance. The design can be ordered either in specialized stores or in factories for the production of hoods.

  • The box ordered according to the required sizes is attached to the wall so as to close the entire air duct from the hood to the ceiling.
  • The finished design is decorated if necessary, but in most cases this is not required, since metal is suitable for almost any kitchen design.

This method is suitable for masking both pipes and corrugations.

Aerodic channel hidden in a metal box

Plastic box

Plastic boxes are made from PVC, fluoroplastic or high.pressure polyethylene, they can be used if the distance from the ventilation to the exhaust device is less than 3 meters. PVC and fluoroplastic camouflage cases can be of two types:

  • With a round building. Such a box has less resistance to suction air, therefore are considered more effective in operation. The problem of round structures. the duct should be no more than 1.5 m long. Some square devices do not allow you to attach a round plastic box to them.
  • The box with a square building is cheaper than round analogues, attached to almost any fingering device and can have an duct of up to 3 m long. Have greater resistance when sucking air, but with rare daily cooking, this is not critical.

Square plastic box with removal

Box from wood and plywood or OSP

A wood box is suitable for closing the pipe and for masking corrugation in the kitchen. But both of the exhaust channel requires additional compounds to protect the pipes from the appearance of condensate. It allows you to reduce the degree of heat transfer.

  • The anti.condensate composition is applied to the pipe in 6 layers. Due to its low density, the weight of the duct will be increased minimally.
  • The frame of the camouflage box is formed from the beam, in which a pipe or corrugation will be located. Bars are screwed to the walls or ceiling depending on the location and geometry.
  • OSP or plywood canvases are cut to the specified dimensions.
  • From the inside, the composition of the box is also applied to all segments to prevent condensate. It is important to give every detail the box to dry qualitatively.
  • The canvas of the box is attached to the brown frame of the box. It is important to use precisely screws, not nails, so as not to damage the beam.
  • The finished box is grinded, primed and finished with veneer, or natural wood of more expensive rocks.

Using built.in furniture

If the room is equipped with special built.in furniture, you can hide the hood in one of the lockers. Such a cabinet should be quite high, almost to the ceiling, then the corrugation will be inconspicuous. In this case, it is necessary to choose the appropriate type of hood, you need to additionally determine its location place.

In the lower part of the cabinet, it is necessary to cut the hole corresponding to the shape of the hood, and on top and on the shelves, make circles under the duct pipe. The device is attached to the bottom of the cabinet so that the working surface is exclusively remaining outside.

The mount should take into account all the design features. The corrugation is connected to her and extended to the pre.made holes. It can be disguised using a plastic box. Additionally, you can try to remove the pipe through the top panel, but using the side walls of the cabinet. At the same time, the pipe will be absolutely not noticeable, but there will be a little decrease for all kinds of kitchen utensils.

If the hinged cabinets are not high enough, you can hide the pipe using a hinged visor completed to them. In this case, you need to make the upper part of the cabinets protruding, and put the corrugation as close to the wall as possible. Then the pipe will be visible only at the entrance to the ventilation duct, but this place can be sheathed with a plastic box or painted in the tone of the walls. The visor itself can be decorated with point lighting.

The nuances during installation

Do not bend the pipe by more than 90 degrees

For installation work to be carried out correctly, adhere to such tips:

  • The diameter of the pipe itself should correspond to the diameter of the ventilation hole or be larger;
  • The total length of the pipe should not exceed 3 m;
  • Do not bend the pipe more than 90º;
  • For protection against reverse traction, special valves are used. plastic or captured.

Background protection

Photos of well.installed ducts in the interior of the kitchen

Invisible air ducts for hoods from corrugation are practical and durable. They are usually hidden behind decorative trim, as in the photo below.

You can beautifully lay ventilation from a corrugated pipe using available materials. Before the work, the channel laying route and the way of disguise are determined before the work. For effective operation of the system, it is important to choose the right diameter of pipes for the duct.

Author

Kerariel

| Denial of responsibility | Contacts |RSS