Gas stove Indesite does not work

Why does the oven rotate in a gas stove: the main reasons and ways to solve them

Gas stoves, and in particular oven cabinets, are particularly reliable. You can still meet products with experience of 50 years that have been successfully working. Alas, not all the owners of technology are lucky. Like any other oven, gas can fail and break. If your oven:

• lights up, but goes out when you let go of the handle or button;
• lights up, but spontaneously goes out during operation;
• Fire does not burn, even if you bring a match

Note! If the oven manages to light with a match, but the auto.paper does not work, study the article “The electrical adjustment of the gas oven does not work, and it does not light up”.

Signs of a malfunction

Electric lights in gas plates can break unexpectedly: the switch is spinning, gas output, but there is no spark. The breakdown of an additional function can occur for absolutely different reasons.

But first of all, it is worth determining that the function of the electrical adjustment of the gas stove really failed. This may indicate the following signs:

• When pressing the control handle or the burner button, the electricalwork function does not work;
• Automatic functions of the device work in continuous mode, sounds similar to clicks are noted. In this case, there is no spark, the gas stove simply does not light;
• When releasing a handle or button, there is no shutdown of the system;
• The device works even without pressing the button;
• There is a break in the protection machine in the area of ​​the apartment shield during the inclusion of the device;
• The presence of a malfunction can be installed according to the scheme of piezor.zero and electric lighting, it can be closed.

After washing the electrical fitting of the gas stove does not turn off

Quite often, constant clicks in the automatic lighting system begin to appear immediately after the completion of washing the slab. In such cases, the most likely reason is to get moisture in the button (on one of the contacts in the taps of turning on the fireplace), which activate the formation of “sparks” for the ignition of burners. Since water is a good conductor of electricity, the circuit is closed and the central bundle block is turned on.

Typically, clicks stop spontaneously after moisture completely dry on the contacts of the button or crane. To prevent overheating of the electronic ignition module or other unpleasant consequences, turn off the cord of the elastic plates.

Electric lights failed

Electric fee may not work on 1 burner or several at once. If it is not possible to turn on all the hobs at once, then, most likely, the malfunction lies in the high voltage source. You can’t disassemble and do something, it is life-threatening.

It is also recommended to check the quality of the supply cable and fork, the piezoelectric element may not work if the wire is pushed, bent or isolation is damaged on it. Melting for a fork or outlet also negatively affects the action of the device.

If the performance remains at least on one burner or in the oven, then the defect could touch the insulator, which cracks during intensive use. Contacts and rod wires are also subject to damage, to check them, they should be called. As a rule, the contacts themselves are rarely damaged, because the current in the high.voltage circuit is insignificant, but the insulation of the wires fails in the process of heating, closing to the case.

Electric ignition does not light one burner

Automatic electric burning of burners is made of numerous nodes. The most responsible element is the discharge (candle of ignition in white ceramics). Violation of the insulation of the armor pipeline or crack in ceramics will violate the work of the entire device. the spark on one burner disappears. A crack or chip on the insulating surface takes the spark to the side (pierces on the case). The defect is perfectly visible in the dark. It is impossible to restore the integrity of the insulator with a twist or island, only replacement remains. The candle is installed in the hole and is attached to the cord to the gas burner, connected to the block in 100% of cases by the “Papa-Mama” connection. Only the original candle is installed in return, the analogue has a different seat and height of the electrode, which is the main criterion for the correct operation.

How to independently repair an auto.zero gas stove.

Removing pollution from nozzles

Every attentive mistress is important to know what the nozzle is like. This is a small element of a gas burner that is responsible for gas supply itself

Therefore, if in the process of using the kitchen stove, problems associated with the intensity of the flame or completely with the disappearance of gas appear, you should pay attention to the nozzle. Apparently it is clogged

Contaminated nozzles for a gas stove can cause poor burning of fireplace.

Accept to note that before independently applying the methods of purifying elements, a professional should be called. The strainer will look at the condition of the device and prove the problem that requires cleaning.

If the problem remains after cleaning, then the master-guessor should be called, who will check the gas supply. Do not eliminate the malfunctions of the stove yourself!

If, after all, the case is in the blockage of the nozzle, you should adhere to the following scheme.

• First you need to remove the burner from the gas stove. There is a need, then wash according to the above instructions.
• The next step is to find a small hole.
• For cleaning, you can use a needle, paper clip, having previously expanded it, or a piece of wire.
• We insert the tool into the nozzle and carry out several rotational movements.
• To make sure that the component is cleaned, the movements should be repeated a couple more times.
• As a result, install everything in its place and open a gas line.

To clean the fireplace firewood, it is not recommended to use powder products, they can clog the holes of the flame of the flame of the flame.L

• Do not check the passage of the gas directly through the nozzle. Before serving the gas, it is necessary to bring the burner to the original form.
• In no case do not allow water entering the nozzle.

Use toothbrushes to clean the narrow tubes directing gas on the cutter cover.

The complete absence of a spark on all burners

The most difficult repair is if there is no spark on all burners. The reasons for the breakdown may be as follows:

• There was a transition to gas of another, lower pressure. in this case, the nozzles are changed to others designed for such pressure;
• There was a break in the wiring. it is possible to restore it by fixing the wires of the electric carpet;
• The block of the slab that generates the fire broke. the problem can only be eliminated by the complete replacement of the ignition unit.

Why the electric light does not work on the gas stove?

You can call a master or St. Petersburg in the SC “Tadkhome” by contacting phone number 8 (495) 228-39-79 or online through feedback form. Applications for the return call are accepted around the clock, operators accept calls from 8:00 to 23:00 without a break and weekends. Repair of gas plates is carried out daily, including on weekends and holidays.

Signs of a malfunction

Before contacting our company, it is advisable to indicate the signs of defects available in the device as accurately as possible. If there are problems with auto.bank, then they are manifested by several visual breakdowns:

• When you turn on automatic ignition, nothing happens. There are no clicks or sparks. Make sure you are clicking the desired button. In some instruments, the ignition system is mounted in a power regulator;
• Clicks are constantly heard. Automation works, but there is no sparks, and the gas does not light;
• When you turn on the ignition and ignition, you release the handle or button, but the candles continue to file the spark on the burner;
• When activating the system, the circuit breaker is constantly knocked out in the shield.

Depending on the visual attribute, you can preliminarily evaluate the nature of the breakdown and carefully prepare for the departure to your address. We also recommend paying attention to the number of non.working drinking.

In some cases, only one burner is not set on fire.

In addition, with non.working nodes, it is necessary to apply attempts to ignition of fireplace with matches or a lighter to eliminate malfunctions associated with gas supply and nozzles.

How the electric fire works?

The enveloping electrical system is used only on gas equipment. Installed both on the hobs and in oven cabinets. The main function is the ignition of natural gas, propane at the beginning of its supply. Dyses are installed directly at the flamearnser. To date, there are two main types:

• Manual. Begins to work when pressing a separate button installed on the device’s body;
• Auto. The spark is supplied at the time of supply of gas automatically, since the node is built into the regulator.

It is worth noting that the automatic version is the most unreliable and capricious element. This applies to all known equipment, including equipment from popular brands.

• Never try to turn on the air with a dismantled burner, since in 100% of cases a breakdown on the case occurs.
• If we consider the system in more detail, then its principle of operation lies in:

• Pressing a button or power regulator. The voltage is supplied to the capacitor, and it begins to accumulate energy;
• The voltage level on the thyristor increases. When accumulating limit values, the capacitor is discharged;
• After that, there is a voltage transmitted to the discharge, which eventually creates a spark;
• The gas is lit.

For the operation of the equipment, it is necessary to connect to the 220V network.

The main causes of the breakdown

If the piezor.Zhizhig does not function, then several details, including their combinations. The main sources of problems are:

• Water or fat regularly gets on the candles. This is especially true for the care of the hob, when the owners ignore accuracy and hurt with wet rags or sponges of the details. The problem also arises in the absence of care, when fat accumulates on components;
• The presence of cracks or violation of insulation on candles. Occurs with natural wear or exposure to the human factor;
• A transformer that generates a spark failed. It will take its repair or replacement with an original analogue;
• Contacts oxidized, wiring failed;
• The launch does not work or the regulator crane has damage. Sometimes the handles are not pressed due to clogging to the end.

As we noted above, most defects are manifested after cleaning. That is why it is important to pay special attention to this. Perhaps in the future, manufacturers will take care of increased protection of components of auto.bank.

Hang.out gives a spark, but the burner does not ignite

The main reason is the problem with the gas environment. Perhaps there is no gas. Light it yourself. If the flame appears, then you will need to replace the candles with new.

This is due to the fact that they have holes on the case and the spark is supplied to a completely different place. Before contacting the specialists of our company, we recommend checking the correct installation of burners and covers.

Perhaps they are displaced or the flameariner was polluted from the ignition side.

Why is it not the first time?

• Low quality of gas in a cylinder or gas pipeline. In this case, gas can be smoked or opened from fireplace at high pressure;
• The flame cutter clogged, which is why the gas does not immediately reach the automatic ignition.

To accurately determine the malfunction with your own hands is not possible. We recommend that you carefully care for the elements of the slab. If the breakdown remains, call our company.

Is it possible to fix it yourself?

Despite the fact that gas equipment is relatively simple in structure, you should not apply attempts to independent repair. Automobiles are a capricious system, and you risk causing additional damage if you do not have appropriate qualifications. Contact professionals directly.

The workshop of the “Tadhum” guarantees the implementation of the repair at a high level of professionalism using only verified spare parts and the provision of a guarantee. Also, the appeal to us is:

• The ability to get serviceable equipment in a few hours. You will be sure that all services are fulfilled in accordance with all requirements;
• Customer service at home. You will personally see the breakdown of specific details;
• We have components in stock. At the same time, we offer customers affordable for their acquisition, which are much more profitable than retail. We also have all the official documentation confirming their originality;
• All work is carried out by experienced professionals who are repaired daily only household plates. We know everything about this technique;
• We work with all the famous world brands of plates, including Gefest, Bosch, Hansa, Ariston, Mora and others.

Causes of damage to electrical adjustment gas stove

The causes of the system malfunction can be different, and many of them can be handled independently.

It does not work on the air of Ariston’s stove

If the Ariston does not work at the gas stove, then the owners of this equipment, like other brands, need to control the contrast of the mechanism with fat or other third.party products. During cooking, particles may fall into contacts, forming a blocking layer on a metal surface. This does not allow sparking to form.

To form an insulating surface, due to which everything is poorly lit, detergents are capable of. They leave the film or the contact is wet, interfering with work. It is enough to carry out mechanical cleaning or drying to eliminate the problem.

Problem moments Gorenie

Frequent repair repair is required when failing or loss of the tightness of an inciting candle. To eliminate the malfunction will help the complete replacement of the element with a new copy. A similar solution is necessary in the event of its strong pollution from the cargo that appeared during intensive operation.

There are troubles with the ignition block. During the rotation of the handle, the cod is not heard, but the spark does not appear, since the impulse does not receive contacts. Experienced masters know what to do. to completely change the block, since it is not repairing.

It happens that during harvesting the hobs, even if caused by caution, the liquid can get to the bare contacts or sections of the wiring related to the fuse of fire. Gradually water forms an oxide film, oxidizing the free surface. Ugalin is able to be implemented deeply over time. Thus, contacts are loaded, which eventually break or crumble.

Regularly grille, the burners inside are cleaned from the scale, gradually accumulating from fatty and liquid foods flowing onto the plate

You can reanimate this condition with your own hands using technical or chemical cleaning. Next, it is necessary to dry the surface. Such preventive work can be carried out independently and regularly.

In order not to create a short circuit, it is important before diagnosis, inspection or repair to disable the system from the mains. It is enough to remove the fork to follow the safety rules.

Hansa Gefest

Hans and Hephaestus are believed to have a weak spot. It is worth taking care of compliance with its transformer with a possible replacement of the latter. If you connect it incorrect, then the spark will not happen.

It is worth paying attention to the performance. The failure or significant deformation will have a negative impact on current launch. The flame is obliged to spread evenly, to be homogeneous and non.cod.shaped. If the water is accidentally spilled on contacts, then it is worth dried, otherwise the fire will not happen.

When the flame spreads unevenly, then clean the nozzles yourself. It is also allowed to replace the defective cutter.

Bosch. even the “Germans” fail

Often the main breakdown is the ignition unit. This is due to fluctuations in the mains and is often found in remote regions. The event also occurs due to a short circuit. Experienced electricians will be able to independently replace the resistor inside with a working analogue, and beginners will have to purchase a new block completely, since they will not be able to understand the printed circuit board without third.party assistance.

The site is not intended for viewing to persons under the age of 18. Copying materials is allowed only when posting an active link to the Portaltepla website.ru