Home Small appliances Foot for industrial sewing machine juki
Small appliances

Foot for industrial sewing machine juki

Sewing machine does not function without a foot, because it is involved in the formation of the stitch. The presser foot presses the material against the working surface, thereby ensuring adherence to the teeth of the lower transport, which in turn advance the material. It is also its job to keep the material free when the upper thread is pulled in.

Paddles can be made of different materials and in different proportions. The sewing process is directly affected by the soleplate material. So there are two types of soles:

Teflon feet have better glideability and are used for sewing leather, vinyl and similar materials.

To prevent the Teflon feet from wearing out too quickly, do not let them come into contact with the teeth of the feed dog.

Metal ones are more resistant to wear and tear. But in certain materials like leather, advancement problems can occur.

Universal sewing foot

It is used to perform a variety of basic stitches and most of the classic sewing operations that are provided by the sewing machine.

foot, industrial, sewing, machine, juki

Universal sewing foot

Used for a variety of basic stitches and most of the classic sewing operations that are provided for the sewing machine.

Note the needle must be in the center of the round hole in the foot. If it is offset, there is a risk of needle breakage.

Universal foot with Teflon sole

Can be used for a variety of basic stitches and most of the classic sewing operations of a sewing machine.

Foot with narrow sole

The foot has two horns, but it’s comparable in width to one horn of the universal foot. This makes the foot handy for sewing with a zipper as well as in hard to reach places.

Foot with narrow sole

Foot has two horns but is as wide as a universal foot. For this reason the foot is perfect for sewing with a zipper or in hard-to-reach places.

Blindstitching foot

The foot has two flutes and a spout to hold the zipper teeth. This is a highly specialized foot, but without it, sewing a hidden zipper is problematic. Foot must be chosen according to the width of the zipper.

Foot for sewing cords, hems, keder

The special feature of this foot is the channel in the soleplate. The cord channel can be located on either the left or right side relative to the needle hole. It allows you to fix the cord while sewing. Therefore, the foot should be taken for a particular cord, knowing its diameter.

Foot for sewing on cord, piping, cedar

The peculiarity of this foot is the channel in the sole. The duct for the cord can be on the left or on the right side in relation to the needle hole. It allows you to fix the cord while sewing. That’s why you need to get a presser foot for a particular cord, knowing its diameter.

Zipper foot

the foot has one thin horn, and the needle hole is located on the edge of the sole (there are left and right handed feet).This design allows you to get as close to the lightning itself as possible.

To create ruffles

Such feet allow you to create ruffles, where the bottom layer forms a fold, and the top passes through a special hole and is sewn to the bottom. The depth of the hole determines how far from the edge the stitching will be. So when choosing, pay attention to this.

To create ruffles

These feet allow you to create ruffles, where the bottom layer forms a fold, and the top layer passes through a special hole and is sewn to the bottom. The depth of the hole determines how far from the edge the stitching will be. So pay attention to this when selecting.

Hole-less sewing foot

As with the first design, the folds are formed by stepping the sole. But its only function is to form a fit.

Creasing foot

This foot has two parts: a foot and a removable sole. This design makes it possible to adjust the frequency of pleats by moving the sole. The further the sole is from the foot attachment, the greater the fit. thicker pleats. The shorter the stitch length, the shorter the fit. Accordingly, when reducing the stitch length to increase the tension of the upper thread.

The fit is also affected by the size of the soleplate: the larger the soleplate, the greater the fit. In addition, the larger the sole, the easier it is to work with heavy materials. Accordingly, the small easier to work with lightweight (chintz, silk, etc.).

Sewing foot for tacking

This foot has two parts: a foot and a removable sole. This design makes it possible to regulate the frequency of folds by moving the sole plate. The farther the sole from the foot mount, the greater the fit. thicker creases. The shorter the stitch length, the less landing. Accordingly, if you reduce the stitch length, you must increase the tension of the upper thread.

The fit is also affected by the size of the sole: the larger the sole, the greater the fit. In addition the larger the sole, the easier it is to sew on heavy materials. Accordingly, the small is easier to work with light ( chintz, silk, etc.).

With adjustable base tilt

This foot has a variable tilt that can be adjusted with a screw. With the screw turned out this is the regular multi-purpose foot. If the screw is tightened, the sole will tilt and form a fit. The greater the slope, the greater the planting.

Chopper foot

This foot closes the seam in one fold. It can be used as a decorative element and for edge protection.

Cutter foot

This foot closes the cut in one fold. This can be used both as a decorative element and for edge protection.

Rubber-stitching foot

Foot has a groove through which the rubber band goes under the needle. With a special screw, you can adjust the stretching of the elastic at the moment of sewing. These legs come in a variety of gum sizes.

For edge stitching

One of the horns of this foot is spring loaded in order to compensate for differences in height. Due to the difference in the width of the horns can lay the stitch at a certain distance from the edge. These legs come in many variations so you need to know which side of the edge you are sewing with when you choose them. and how far away from it you will be sewing.

For the edge stitching

One of the legs has a spring-loaded arm to make up for the difference in height. Because of the difference in the width of the horns you can sew at a certain distance from the edge. These feet are sold in different versions, so when choosing you need to understand which side of the edge. and how far away from it you will be stitching.

Foot with ruler

You can also use the foot with a ruler for stitching, it acts as a guide and limiter. The length of the ruler can be adjusted manually.

Foot for synthetic stitching

When working with bulky materials can be a problem, when the material does not pass well. To create this effect there is a special foot with extended and bent horns.

Foot for sintepon

When working with bulk materials can be a problem when the material does not pass. For this there is a special foot with extended and bent horns.

Roller Foot

Roller distributes pressure evenly over all layers of fabric. This greatly facilitates the advancement of the material, so this foot is ideal for working with multiple layers, as well as leather and suede. On the foot it is also easy to make turns and roundings.

Sewing foot for Juki

Foot for a sewing machine Juki Series F, DX, QM.

See also  How to wash pillows in a washing machine
Brand JUKI
Delivery within the city, 300

Ul.Sushchevsky Val v.5 с.1A, TC “Savelovsky” floor 2, pav.2F-08, 10-21 a.m., 7 days a week2. Shchelkovskoe w., д.5 с.1, 10-19 h, 7 days a week

Dear Customers! This site is for information purposes and is not a public offer, which is defined by the provisions of paragraph 2 of Article 437 of the Civil Code of the Russian Federation. The manufacturer reserves the right to change the product’s characteristics, appearance and package without consumer’s prior notice. For the detailed information on cost of the goods, availability and accessories please contact the employees of the Internet-shop by phone 7 495 215-16-46.

© 2003. 2022. Online store of the federal chain of sewing machine shops “Beloshveika” Copying of all the parts of the site in any form without the permission of the copyright owners is prohibited.

Thank you! We will contact you shortly

After ordering in our online store “Whitewashing” (by phone) or online (via cart), you can take advantage of delivery service.

The convenience of this service is that you save your time and get the goods you ordered at home.

We deliver in Moscow and the Moscow region, as well as all over the Russian Federation through transport companies.

You can also order pickup in our collection points all over

You can find the pickup locations here.

Each stage of delivery, you can track in a private office or just call us at 7 (495) 215-16-46

Offer is valid “Free delivery in Moscow“for orders from 4999.

Forwarder will contact you 1-2 hours before your delivery

Additional service that allows you to get the goods at a specified time interval of 2 hours.

Delivery to the transportation company in Moscow.Moscow

Delivery is carried out by the delivery company you’ve chosen. Delivery charges are collected by the shipping company upon receipt of your order.

Below listed information on the transportation companies that customers often ask:

Name Delivery cost and period
First Forwarding Company (PEC) from 1 day from 7 /kg View Calculate Status
SDEC from 1 day to 7 View Calculate Status
Business lines from 1 day of 7 /kg View Calculate Status
Zheldor-forwarding from 1 day of 7 /kg View Calculate Status
  • If you form an order on the site. choose the most convenient way of delivery.
  • Via our call center. Call us at 7 (495) 215-16-46 and specify which product you would like to have delivered.
  • For delivery the exact address is required.(office, apartment).
  • Check out of the pickup point by our staff
  • Checking the goods for delivery by transport company or delivery from the pickup point is performed by the customer
  • Delivery tariffs are within MKAD (Moscow Ring Road). Delivery outside the Moscow Ring Road within the Moscow region is calculated individually.

To find out about delivery in regions where our offices are located, please select your region in the upper left corner of the page. You will go to your region’s personal page. Then in the shipping section you will be able to read in detail about shipping conditions in the region.

Presser feet for industrial sewing machines juki

During its long history, which began in 1938 with the association of all manufacturers in Tokyo into a single corporation, the company by trial, error and success has created a unique in technology and functionality of sewing machines. Now the company is the recipient of many prestigious awards (including the Deming Award for production quality control), and Juki products are used by such masters of high fashion as Giorgio Armani, Louis Vuitton, Ermenegildo Zegna, MaxMara, Hugo Boss, Levi’s and many others.

Few people know that the manufacturer of the best industrial sewing machines began with domestic models, but it’s true! The first machine designed in 1947 was specifically for home use. A few years later the company turned to creating equipment for mass production, but it did not forget about the household series! Nowadays only Juki household machines use industrial technologies (for example, rectangular fabric feed), which ensures their durability and professional quality of products. Thus, the customer base of the company is expanding not only through the manufactories and factories, but also through retail distributors.

GERAN “Lux” as the official representative of Japanese company in Russia offers you to buy Juki industrial and consumer series machines from stock or under order. You can see the model in action in our showroom before purchase.

Bottom advancement

Traditional bottom-positioning is widely used also in new generation industrial sewing machines. We offer you models for milling materials of different surface densities: from light fabrics to soft leather.

Bottom and top advancement

Machines with lower and upper advancement are used for sewing articles of heavy fabrics and non-textile heavy materials, including leather.

Bottom and Needle Promotion

Dual fabric advancement allows you to sew lightweight and heavyweight fabrics that are difficult to advance, while minimizing the appearance of poor quality seams when working. Machines with bottom and needle point feed advances the fabric from both above and below. Toothed rack and needle are involved in the process. These two elements kind of nudge the fabric and provide nonstitching stitching. You get no unnecessary bunching and perfect sewing quality at the end of the day.

Bottom, top and needle advancement

Sewing machines with overhead, underhead and needle advancement are ideal for sewing heavy, extra heavy, thick and slippery fabrics.

Bottom and needle advancement

Double-needle sewing machines with bottom and needle advancement perfectly cope with light, medium and heavy materials. “HERAN luxury presents a large selection of equipment with two parallel shuttle stitches, automatic lubrication, automatic foot lift, tacking and thread trimming, and other options that make labor easier.

Bottom, top and needle advancement

Two-needle straight-stitch sewing machines with bottom, top and needle advancement are well suited for both large businesses and small ateliers. The perfect choice for heavy and extra heavy materials.

General provisions

Some of the items posted on the site are the intellectual property of StoreLand. The use of such objects is stipulated by the current legislation

StoreLand’s website has links that take you to other sites. StoreLand is not responsible for the information published on these sites and only provides links to them for the convenience of its site visitors.

Personal information and security

StoreLand company guarantees that no information, obtained from you, under no circumstances will be provided to any third party, except as required by applicable law of the Russian Federation.

In certain circumstances, StoreLand may ask you to register and provide personal information. The provided information is used solely for business purposes, as well as to provide access to specific information.

You can change, update or delete your personal information at any time in your “Account”, “Profile” section.

To provide you with certain kinds of information, StoreLand may, with your explicit consent, send informative emails to the email address you provided during registration. You may change the subject or unsubscribe from the newsletter at any time.

Збиральна /сорочкова лапка для промислових / комерційних швейних машин | P952 & P5 | Джек, Джукі DDL

Like many sites, StoreLand uses cookie technology that can be used to promote our product and measure the effectiveness of advertising. In addition, with the help of this technology StoreLand adjusts to work with you personally. In particular, without this technology, it is not possible to work with authorization in the control panel.

The information on this site is provided for informational purposes only and is subject to change without notice.

To opt out of further communication with our company, change or delete your personal information, please contact us via the feedback form

Footstock for CMP

Foot 130T6-002A-56/GC31030-12 (29) “Typical” 5,6 mm to compare set aside. to cart Price: 254.40  ₽ Foot SZ-2792 Suzuki SE-200 (left) to compare put away. to cart Price: 7,495.20  ₽ Outer Foot 151528-001 5/16″ (3rd Extension).) for edging (ext. 183008-001 1/8-3/8) to compare set aside. to cart Price: 1 221.60  ₽ External Foot 151544-001 1/4″ (3rd Ext.) for edging (internal. 183020-001 1/4) to compare set aside. to cart Price: 1 221.60  Foot 601-3 (2nd version) ₽Extra.) for U-568 to compare set aside. to cart Price: 688.80  Foot inside 183030-001 (3rd version) ₽ (3ppm).) single sided (external. 151564-001) to compare put aside. to cart Price: 576.00  Foot inside 601-3RG 3/16″ (2nd size), 2 x 601-3RG 3/16″ (2nd size), 2 x 601-3RG 3/16″ (2nd size), 2 x 601-3RG.) with limited.Add to compare set aside. to cart Price: 1 267.20  Internal presser foot U-193 (2nd version) with zipper.) to compare put away. to cart Price: 759.22  U-193KW (2nd version) Footstock.) for edging all sizes to compare set aside. to cart Price: 822.00  U-193R (2nd version) Foot inside the U-193R (2nd version).) to compare set aside. to cart Price: 1 078.15  U-193R internal foot (2nd renewal).) for zipper to compare set aside. to cart Price: 844.80  ₽ Foot d/Prom.stitch.mash. CL10 1mm, left to compare put aside. to cart Price: 190.80  ₽ Footstock.stitch.waving. CL70 7mm, left side to compare set aside. to cart Price: 281.52  ₽ Impromptu Foot.₽ Footstock.wrench. P351 1ST to compare set aside. to cart Price: 115.20  ₽ Foot zipper.seams.waving. P36 N to compare put aside. to cart Price: 70.80  ₽ Impromptu foot.stitching foot.mash. P825-NF 5/16 (7.9mm), left side to compare set aside. to cart Price: 970.80  ₽ Impromptu Foot.suture.Mash. SP18 1/4 (6,4mm) for stitching to compare set aside. to cart Price: 146.40  Pawl with presser foot ₽ left foot ₽ left foot ₽ left foot.stitch.mash. SP18 3/16 (4,8mm) for stitching to compare set aside. to cart Price: 146.40  Foot for industrial work.suture.waving.120803; 1/8″-3,2mm undercut to compare set aside. to cart Price: 511.20  Hinge / presser foot ₽ SP18 3/16 (4,8mm).₽ Footstock.Mash.36069 L 3/8 (9.5mm) left to compare put aside. to cart Price: 194.40  ₽ Foot for industrial use.Sewing foot.Mash.P 69 RH 1/8″ cord foot to compare set aside. to cart Price: 190.80  P20BD↩ Footstock for industrial machines.footstock.mash.P193 (19336) to compare put aside. to cart Price: 248.40  ₽ Footstock for Ironmongery.st.Mash.S-518N-NF to compare set aside. to cart Price: 488.40  Presser foot (4) / ₽ Presser foot (2) / GK0056-1 (4) / ₽ Presser foot.seams.wrench.S-570 1-1/4 “х1/16” right., with restriction. to compare put away. to cart Price: 327.30  48 “Typical” 1/4 “x1/16” left S-570L 1/4 “x1/16” left ₽ Foot.sv.mash.S-570DG 1/4 “x1/32” double-ended., with limit. to compare set aside. to cart Price: 309.32  ₽ Impromptu Foot.seams.waving.S-570DG 3/8 “x1/16” double-ended., with stop. Add to compare set aside. to cart Price: 321.11  ₽ Footstock.stitch.mash.S-570L 1/4 “х1/16” left., foot with limiter. to compare set aside. to cart Price: 589.78  ₽ Impromptu Foot.wrench.waving.S-570L 1/4 “x1/32” left., with limit. Add to Compare Set aside. to Cart Price: 237.56  ₽ P69LH 1/8 left-handed sewing foot for hem to compare put aside. to cart Price: 182.40  Presser foot 158B31000//GK0056-1 (4).48) “Typical” 4.8 mm to compare put away. to cart Price: 566.40  Pressing foot 160710000/2000-3(12).22) “Typical” to compare put aside. to cart Price: 1 220.40  Pressing foot 160730000/2000-3 (P48).22) “Typical” to compare put aside. to cart Price: 1 380.00  ₽ Pressing foot 160740000/2000-3B “Typical” to compare set aside. to cart Price: 913.20  ₽ Pressing foot assembly 160750000/2000-3E “Typical” to compare put aside. to cart Price: 1 638.00  Presser foot 77T7-001A//2000-5H (12.22) “Typical” to compare put aside. to cart Price: 1 288.80  Pressing foot assembly 116T6-002A/GK31030 (6 mm) (13).12) “Typical” to compare put aside. to cart Price: 392.40  ₽ Pressing foot assembly 116T6-005C/31030 6.4mm “Typical” to compare put aside. into cart Price: 638.40  ₽ Pressing foot assembly 116T6-007E/31030 4,8mm “Typical” to compare set aside. to cart Price: 638.40  ₽A presser foot assembly 7WF5-006 (U192)//0302(6mm).7) “Typical” to compare put away. to cart Price: 945.60  ₽ Foot Fluoroplastic. MT18 (P 351T) to compare set aside. to cart Price: 42.00  ₽ Fluoroplastic foot. T 35 W 15mm to compare set aside. to cart Price: 61.20  ₽ Foot fluoroplastic. T 350 to compare set aside. to cart Price: 70.80  ₽ Foot Fluoroplastic. T 35W 12.5mm to compare put aside. to cart Price: 64.80  ₽ Ironmonger’s presser foot.sew.waving. R2 to compare put away. to cart Price: 628.80  ₽ Rolling Foot for Sewing Machine.stitch.mash.12264(S) (22mm) to compare put away. into cart Price: 373.20  ₽ Tine-roller d/prom.inseam.machine.12265 M (25mm) to compare set aside. to cart Price: 373.20  ₽ Rolling foot.STEP.MACHINE.12267 L (28mm) to compare set aside. to cart Price: 373.20  ₽ Teflon self adhesive tape. A5108 (width.25mm, thick.250micron) to compare put aside. to cart Price: 315.60  ₽

See also  Smoker from a gas cylinder with his hands

Additional details, which can be bought in bulk and in small quantities in the online store of TANA company, allow to fulfill filigree all basic functions of the universal machine. Depending on the specific application, fabric type and stitch quality requirements, you can choose from a variety of sewing machine feet for universal sewing machines:

  • For straight stitch (for delicate fabrics, medium and high density material);
  • For knitwear with different weave fabrics;
  • For blindstitching;
  • For sewing zipper lock (with plastic and metal elements);
  • For buttonhole sewing on semi-automatic and computerized machines;
  • Snail clippers for ruffles, trimmings;
  • Other foot options for universal sewing machines Janome, Brother, Minerva, Singer, Pfaff, Juke and other manufacturers.
  • High strength and reliability;
  • Easy fixation due to the dimensional accuracy;
  • High quality foot and needle are chosen based on the specific fabric, which allows you to get the seam with the desired characteristics without defects, damage or tearing the material.

You order. We buy back and ship to you

To your homeDelivered to Russia and all CIS countries

The user, by leaving an order on the website https://shopozz.ru, https://jp.shopozz.ru, https://cn.shopozz.Ltd. accepts this Consent to the processing of personal data (hereinafter. Consent). Acting freely, of his own free will and in his own interest, and confirming his legal capacity, the user consents to the processing of his personal data for Shopozz Corp., 723 South Casino Center Blvd., 2nd Floor Las Vegas, NV 89101-6716 at https://shopozz.Ltd., TIN 6315642316 in the territory of. in order to provide mediation services for the purchase of goods in online stores and auctions in the U.S.

  • This Consent is given for the processing of personal data, both without the use of automation tools and with the use of them.
  • This consent is given for the processing of the following personal data:
  • 1) Personal information that is not specific or biometric: contact telephone numbers, e-mail addresses, places of work and positions, user information (information about the location, OS type and version, Browser type and version, device type and screen resolution, the source where the user came to the site, from which site or through which ads, OS and Browser language, which pages the user opens and clicks on, ip address.
  • Personal data is not publicly available.
  • The purpose of the processing of personal data: processing incoming inquiries from individuals for the purpose of placing orders; analysing the activities of an individual on the website and the functioning of the website; sending promotional and newsletters.
  • The basis for the processing of personal data is: Art. 24 of the Constitution of the Russian Federation; Art.6 of the Federal Law 52-FZ “On Personal Data”; Charter of Shopozz Corp.” ; this consent to the processing of personal data.
  • During processing, the following actions will be performed with personal data: collection; recording; systematization; accumulation; storage; clarification (updating, modification); extraction; use; transfer (distribution, provision, access); blocking; deletion; destruction.
  • Personal information is processed until the individual unsubscribes from advertising and newsletters. Processing of personal data may also be terminated at the request of the data subject. Storage of personal data, recorded on paper is carried out according to the Federal Law 25-FZ “About archival business in the Russian Federation” and other normative legal acts in the field of archival business and archival storage.
  • Consent may be withdrawn by the subject of personal data or his representative by sending a written statement “Shopozz Corp.”or its representative to the address set forth at the beginning of this Consent.
  • In case of revocation of the personal data subject or his representative consent to the processing of personal data “Shopozz Corp.”Shopozz Corp. has the right to continue processing personal data without the consent of the subject of personal data, if the grounds specified in paragraphs 2. 11 of paragraph 1 of Article 6, paragraph 2 of Article 10 and paragraph 2 of Article 11 of the Federal Law 52-FZ “On Personal Data” of 27.07.2006 г
  • This consent is valid at all times until the data contained in this paragraph is no longer processed.7 and n.8 of this Concordance.

Delivery of goods from eBay and USA online stores to Russia at affordable prices. All rights reserved

Foot for sewing machines

The foot is designed for automatic buttonhole sewing. For AV machines.

Special adapter allows you to quickly change the foot. It must be screwed to the presser foot pin of the machine and the foot can be unhooked by pressing the hook.

For Janome models with 5 mm width and vertical hook.

The plate made of durable plastic will help to sew on the button with a foot of thread. Can also be used when sewing thick stitches.

The foot helps to neatly sew the appliqué to clothing or accessories. On the bottom of the sole there is a recess, which freely passes stitches under the foot lines of any shape. The bent edge of the foot also contributes to this.

For Janome models with a width of 5-7 mm and a horizontal hook.

Foot for sewing zippers. The edge of this foot guides the zipper, ensuring straight stitching. The notch on the foot is on the right side of the needle.

For Janome models with a width of 5 mm and a vertical hook.

Foot for sewing zipper, double-sided. Allows you to sew on both sides of the zipper.

See also  How to change the needle in a sewing machine

For Janome models with a width of 5-7 mm and a horizontal hook.

Footlets Aurora can be used on machines of different brands (Brother, Bernette, Juki, Janome, etc.).).

The sole design of this foot gives easy sewing on thin fabrics. It allows you to sew one piece to another in one step.

Aurora feet can be used on many brands of machines (Brother, Bernette, Juki, Janome, etc.).).

Aurora has a rubber sole which holds a button securely in place when sewing. Can also be used for sewing on buttonholes and hooks.

Aurora presser feet can be used on a variety of machine brands (Brother, Bernette, Juki, Janome, etc.).).

Grooves on the sole of this foot allow getting accurate parallel serrations on medium to thin fabric.

Foot for sewing narrow seams with hems (for designing the edge of a tablecloth, collar, jabot). Foot has a special fabric feed on top and an opening on the other side for width of hemming.

Hemming foot (roller undercutter) is designed for Janome models with a width of 5 mm and a vertical hook.

Hemming foot with special design for feeding the fabric at the top. Designed for working on medium-density fabrics, width of undercutting 4 mm.

For models with horizontal hook and zigzag width up to 7 mm.

Foot Aurora can be used on machines of different brands (Brother, Bernette, Juki, Janome, etc.).).

A twin needle is necessary for this foot. The grooves on the sole form embossed pleats on thin fabrics, which are then fixed with stitches.

The Aurora foot can be used on different brands of machines (Brother, Bernette, Juki, Janome, etc.).).

The design is ideal for decorative stitches (satin stitches) and sewing on appliqués. Transparent and open soleplate allows full control of the sewing process.

Foot for exact sewing zipper. Designed to be installed in MC series machines, as well as Skyline S3/5.

Foot is designed for sewing zippers on both sides. The special edge of the soleplate guides the zipper stitching.

For Janome models with a width of 5 mm and a vertical hook.

Foot Aurora can be used on machines of different brands (Brother, Bernette, Juki, Janome, etc.).).

This adapter variant is used in those machines which use screwdriver foot fixation. It can replace the presser foot much faster.

Foot Aurora can be used on machines of different brands (Brother, Bernette, Juki, Janome and others).).

Foot with groove for fast sewing zippers. Made of metal.

Paws Aurora can be used on machines of different brands (Brother, Bernette, Juki, Janome, etc.) and brand-nose shuttles.).

Foot has a special plastic guide, which allows you to perform a secret stitch on any product.

Foot with a special sole allows you to accurately sew the button to your product. Two rubberized feet hold a button and provide stability during the stitching.

For Janome models with 5 mm width and vertical hook.

Foot comes with the sewing machine and is a universal foot. There is a slot in the center of the sole, which allows you to direct the material more accurately during work.

For Janome models with a width of 5 mm and a vertical hook.

Foot Aurora can be used on machines of different brands (Brother, Bernette, Juki, Janome, etc.).).

Metal foot can be installed on both sides of the needle, which allows you to sew a zipper without unrolling the product.

Aurora foot can be used on many brands of machines (Brother, Bernette, Juki, Janome, etc.).).

For a proper blindstitching, the stitches have to run right next to the serrations. Metal protrusions on the bottom of the foot spread the ribbon of the zipper, so the needle makes a puncture in the right place.

Foot Aurora can be used on machines of different brands (Brother, Bernette, Juki, Janome, etc.).).

The metal sole of this foot has a small round needle hole to make the neatest straight stitch possible.

Foot to improve the quality of straight stitching due to the narrow hole in the foot. We also recommend to use the straight-stitch plate in the set with this foot.

For Janome models with a width of 5 mm and a vertical hook.

Sewing machine feet are available for a variety of sewing operations, and several basic options are usually included. If you buy a home machine, there will always be a universal foot (or zigzag foot) in the accessory kit provided. As you can see from the name, this foot is suitable for many tasks (straight stitch, zigzag stitch of different widths, decorative stitches, knit stitches). In addition, most machines are equipped with feet for inserting zippers and making a slotted buttonhole.

Expand the sewing machine’s capabilities by using special feet, which in large quantities are available in our online store. Presented, among others, are the foot’s following purposes:

  • for straight stitch, as well as special variants for stitching and foot with the guide;
  • for sewing on buttons;
  • for overlock stitches;
  • for sewing a standard or blindstitch zipper;
  • Blindstitch;
  • for patchwork and quilting;
  • For embroidery and stitching;
  • For satin stitches, including clear plastic and open front versions. Also for decorative work are feet for applique, creating fringes, sewing cords and beads, making pinches;
  • to work with leather and other difficult materials are available with feet with a Teflon sole or a roller;
  • An overhead feeder, which replaces the adapter and allows double feeding of the fabric. For some machines are available with interchangeable soles.

In order to fit the foot to the sewing machine for home, you need to know exactly the type of machine. For entry-level models enough information about the type of shuttle and the width of the zigzag, and for modern computer machines is better to specify the number of the required accessory in the accessories catalog.

“World of Sewing Machines” offers to buy sewing machine feet for famous brands at an affordable price. Check the compatibility of accessories and equipment with our consultants.

Juki sewing machines and accessories

DDL-8700 Prom.sew.Juki machine (head) to compare set aside. to cart Price: 24 171.10  ₽ Overlock Juki MO 644D to compare put aside. to cart Price: 29 399.99  ₽ Overlocker Juki MO 654DE to compare set aside. to cart Price: 31 799.99  ₽ Juki table top 8100, 8700 for industrial machines.seam.machine. to compare put away. to cart Price: 7 277.97  ₽ Table “Juki” 900A/8700B-7 for prom.sew.mash. to compare put away. to cart Price: 6 197.30  ₽ Table top for industrial table top JUKI DDL-8700-7/DMN-5420N to compare set aside. to cart Price: 4,461.26  ₽ Table top for industrial table JUKI DDL-8700-DB7 120x55cm to compare set aside. to cart Price: 5 218.58  ₽ Table top for industrial table JUKI MF-7500 series (EC) 120x55cm to compare put away. to cart Price: 3,378.18  ₽ YZH-1162 (L) HSH-12-62C (L) Juki LH-1162 left turner to compare set aside. to cart Price: 440.40  ₽ YZH-1162(R) HSH-12-62C(R) Juki LH-1162 right turner to compare set aside. to cart Price: 440.40  ₽ Bobbin YZH-NJ (771) DP2-NJ771 for Juki LBH-780, Typical (Dalian) G18 to compare set aside. to cart Price: 2 868.43  ₽ Ironing YZH2-1182 (L) HSH-12-82C (L) for Juki LH-1182 left to compare set aside. in cart Price: 660.00  ₽ Bobbin case MH-CP-M82C for Juki LH-1182 to compare set aside. in cart Price: 255.60  ₽ Needles JUKI DCx27 20 (trap 10pcs) to compare put aside. to cart Price: 19.20  ₽ Needles JUKI DPh5 60 (10 pack) to compare put aside. in cart Price: 18.00  ₽ Needles JUKI DPx5 0 (trap 10pcs) to compare put aside. into cart Price: 18.00  ₽ Needles JUKI DVx63 00 (trap 10pcs) to compare put aside. to cart Price: 16.80  ₽ Needles JUKI LWx6T 00 (pack of 10pcs) to compare put aside. to cart Price: 85.20  ₽ Needles JUKI UY 128 GAS 00 (set 10pcs) to compare put aside. to cart Price: 21.60  ₽ Needles JUKI UY 128 GAS 10 (trap 10pcs) to compare put aside. into cart Price: 21.60  ₽ Needle Plate B-1109-041-FOO JUKI to compare put aside. in cart Price: 103.20  ₽ Needle plate B1109-415-HOO JUKI to compare set aside. to cart Price: 406.70  ₽ Foot standard for Juki MO-735 to compare set aside. to cart Price: 4 497.02  ₽ Bottom hinge “JUKI” cl. 357 to compare put away. to cart Price: 674.40  ₽ Table top “Juki” for MF-7500 series to compare set aside. to cart Price: 4 704.96  ₽ Juki LH-1162 left turner HSH-12-62C(L) to compare put aside. to cart Price: 1 402.80  ₽

Author

Kerariel

| Denial of responsibility | Contacts |RSS