Home Article Fan Faller Scarlett floor How to assemble
Article

Fan Faller Scarlett floor How to assemble

Unpacking, assembly, test. SCARLETT floor fan (how to assemble)

Summer, heat. Therefore, I bought myself such a fan 🙂 Well, now, I unpack, collect and check in work. I was collecting there, I forgot to insert a circle on the net at once. Therefore, if you also collect, then do not forget to put it in advance, otherwise I will have to disassemble it again to put. And there is such a wire on the grid as below, soldered, it should be from below, so that when you tilt the fan it does not press the buttons. She somehow stops him. If you put it incorrectly, a wire up, then when tilted the nightlight button will be pressed.

Thank you, I just collected the fan, thanks to you!

Scarlett SC-177 Operating Instruction Institution Online. Page 3

Scarlett SC-177 instructions for the device Paul fan contains pages in Russian.

File size: 278.53 KB. Consists of 8 pages.

You can download PDF file of this instruction: download pdf

Carefully read the operating manual and save it as reference material.

Incorrect handling of the device can lead to its breakdown and harm the user.

Before initial inclusion, check whether the technical characteristics indicated on the product correspond to,

Use only for domestic purposes in accordance with this operating manual. The device is not

Designed for industrial use.

The device is not intended for use by persons (including children) with reduced physical, sensual or

mental abilities or in the absence of experience or knowledge, if they are not under control or not

instructed to use the device by a person responsible for their safety.

Children should be under control to prevent the game with the device.

Always turn off the device from the mains before cleaning, or if you do not use it.

In order to avoid electric shock and fire, do not immerse the device into water or other liquids. If a

This happened, do not take up the product, immediately turn it off from the mains and contact the service center

Do not use the device in bathrooms and about water.

Do not have a device near heat sources.

Do not leave the on the device unattended.

Do not use accessories that are not included.

In case of damage to the power cord, its replacement, in order to avoid danger, should be made by the manufacturer or

He authorized by his service center, or similar qualified personnel.

Make sure that the power cord does not touch the sharp edges and hot surfaces.

Do not pull the power cord, do not twist and do not wind it around the device case.

Avoid contact with moving parts of the device. Do not stick pencils or other items through

Protective lattice of a working fan.

Do not turn on the fan without installed protective grilles.

If the product was at a temperature below 0ºC for some time, before turning on it should be kept in

The manufacturer reserves the right without additional notice to make minor changes to

the design of the product that radically does not affect its safety, performance and functionality.

The fan is delivered in a disassembled form. Before starting the assembly, make sure that the supply kit is full and

Do not connect the device to the mains, first not fully collecting it.

Install the stand on the base and fix the screws (included).

Install the electric motor and control unit on the bar and fix the screw in.

Unscrew the fixing nut of the rear grid counterclockwise, and remove it from the fan shaft.

Put the rear grid on the fan shaft.

Wrap the rear grid nut to the shaft and tighten it.

Install the blades on the shaft so that they reach the latch.

To fix them, tighten the fixing nut of the blades counterclockwise.

Combine the front and rear nets so that the logo located in the center of the front mesh is located

horizontally, and fasten them around the circumference by the hoop.

Fix the fan tilt angle with a screw.

The fan control panel is located on the control unit.

The fan button/button switching the rotation speed of the blades;

When you click on this button, the fan will begin to work in rotation mode (incomplete), to cancel this

Fan operation time button; The maximum time is 7.5 o’clock; Each press

Scarlett SC-373 Operating Instruction Instruction. Page 3

Scarlett SC-373 instructions for the device floor fan contains pages in Russian.

File size: 242.19 KB. Consists of 8 pages.

You can download PDF file of this instruction: download pdf

Carefully read the operating manual and save it as reference material.

Incorrect handling of the device can lead to its breakdown and harm the user.

Before initial inclusion, check whether the technical characteristics correspond to the indicated

Use only for domestic purposes in accordance with this operating manual. The device is not

Designed for industrial use.

The device is not intended for use by persons (including children) with reduced physical,

sensual or mental abilities or in the absence of experience or knowledge, if they are not under control or are not instructed to use the device by a person responsible for their safety.

Children should be under control to prevent the game with the device.

Always turn off the device from the mains before cleaning, or if you do not use it.

In order to avoid electric shock and fire, do not immerse the device into water or others

liquids. If this happened, do not take up the product, immediately turn it off from the mains and contact the service center for verification.

Do not use the device in bathrooms and about water.

Do not have a device near heat sources.

Do not leave the on the device unattended.

Do not use accessories that are not included.

In case of damage to the power cord, its replacement, in order to avoid danger, should be made by the manufacturer

either the service center authorized by him, or a similar qualified personnel.

Make sure that the power cord does not touch the sharp edges and hot surfaces.

Do not pull the power cord, do not twist and do not wind it around the device case.

Avoid contact with moving parts of the device. Do not stick pencils or other items

Through the protective lattice of a working fan.

Do not turn on the fan without installed protective grilles.

The manufacturer reserves the right without additional notice to introduce minor

changes to the design of the product that do not affect its safety, performance and functionality.

The fan is delivered in a disassembled form. Before the assembly start, make sure that the delivery set

Do not connect the device to the mains, first not fully collecting it.

Remove the clamp from the rack, put on a decorative pad and lower it on the base. Put out the bar

on the desired length, set the clamp in place and tighten it.

Install the electric motor and control unit on the bar and fix the screw in.

Unscrew the fixing nuts: blades. clockwise and rear grid. counterclockwise, and

Put the rear grid on the fan shaft.

Wrap the rear grid nut to the shaft and tighten it.

Install the blades on the shaft so that they reach the latch.

To fix them, tighten the fixing nut of the blades counterclockwise.

Combine the front and rear grids, fastening them using fixers.

Fix the fan tilt angle with a screw.

The fan is ready to work. JOB NOTE: In order to avoid electric shock or fire, do not use the fan in conditions of high humidity.

Put the fan only on a dry even and stable surface. On the engine casing is located

Fan rotation button. If you press (drown) this button, the engine with the blades will begin to rotate in different directions. To cancel the rotation mode, pull the button back. The fan control panel is located on the control unit.

See also  How to make a cabinet for a built-in oven

On/Speed ​​- the fan button/button for switching the rotation speed of the blades;

Mode. the button sets the fan mode; consistent presses can be set the mode

Scarlett SC-379 Operating Instruction Institution Online. Page 4

Scarlett SC-379 instructions for the device Fan contains pages in Russian.

File size: 313.07 KB. Consists of 5 pages.

You can download PDF file of this instruction: download pdf

scarlett, floor, assemble

Carefully read the operating manual and save it as reference material.

Incorrect handling of the device can lead to its breakdown and harm the user.

Before initial inclusion, check whether the technical characteristics correspond to the indicated

Use only for domestic purposes in accordance with this operating manual. The device is not

Designed for industrial use.

The device is not intended for use by persons (including children) with reduced physical,

sensual or mental abilities or in the absence of experience or knowledge, if they are not

are under control or not instructed to use the device by a person responsible for their

Children should be under control to prevent the game with the device.

Always turn off the device from the mains before cleaning, or if you do not use it.

In order to avoid electric shock and fire, do not immerse the device into water or others

liquids. If this happened, do not take up the product, immediately turn it off from the mains and

Contact the service center for verification.

Do not use the device in bathrooms and about water.

Do not have a device near heat sources.

Do not leave the on the device unattended.

Do not use accessories that are not included.

In case of damage to the power cord, its replacement, in order to avoid danger, should be made by the manufacturer or

He authorized by his service center, or similar qualified personnel.

Make sure that the power cord does not touch the sharp edges and hot surfaces.

Do not pull the power cord, do not twist and do not wind it around the device case.

Avoid contact with moving parts of the device. Do not stick pencils or other items

Through the protective lattice of a working fan.

Do not turn on the fan without installed protective grilles.

Do not try to repair the device yourself or replace any parts. If you detect

Non.proceeds contact the nearest service center.

If the product was at a temperature below 0ºC for some time, before turning it on, it should be

maintain in room conditions for at least 2 hours.

The manufacturer reserves the right without additional notice to introduce minor

changes to the design of the product that are not radically affecting its safety, performance and

The fan is delivered in a disassembled form. Before the assembly start, make sure that the delivery set

Do not connect the device to the mains, first not fully collecting it.

Install the electric motor and control unit on the bar and fix the screw in.

scarlett, floor, assemble

Unscrew the fixing nut of the rear grid counterclockwise, and remove it from the fan shaft.

Put the rear grid on the fan shaft.

Wrap the rear grid nut to the shaft and tighten it.

Install the blades on the shaft so that they reach the latch.

To fix them, tighten the fixing nut of the blades counterclockwise.

Combine the front and rear nets so that the logo located in the center of the front grid,

was located horizontally, and fasten them around the circle with a hoop.

Fix the fan tilt angle with a screw.

The fan control panel is located on the control unit.

The fan button/button switching the rotation speed of the blades;

When you click on this button, the fan will begin to work in rotation mode (incomplete), for

The cancellation of this mode press the button again;

Fan operation time button; The maximum time is 7.5 o’clock; Each

Scarlett SC-DF111S08 fan. review

Summer began with the heat, urgently needed something budget for cooling near the computer. I bought a fan from Scarlett SC-DF111S08. Turned out to be compact, saves a little from the heat. But about everything in more detail in the review.

Country Manufacturer: China

The product itself seemed very light to me, cardboard packaging is also compact. So carrying from the store is not hard. The box has pens.

This is how the fan looks in a collected form. It is small, only 31 cm in height. It works from the network.

Almost everything is made of plastic: the device had a plastic smell after assembly and starting use, now almost disappeared.

But before use, this “miracle” must be collected from parts. There are three of them: the fan itself, the leg and stand.

It is easy to do this: it is screwed in one screw without any tools.

I liked that this model has a clamp-panel and you can attach the valve to the table or shelf.

The stand itself seemed to me thin, light and flimsy, if you put it on an uneven surface to rattle:

The fan operates at two speeds, the first blows for me weakly, but the second is just right. If you sit from it at a distance of up to 1 meter, then it blows the upper half of the body not bad. At least it becomes easier and better than without it.

The speed lever is large enough, it switches not tight. But it is not very convenient that the device is behind.

The grille at the product is plastic, flimsy is crushed by pressing, the blades are also plastic, but more dense.

The head of the fan itself does not spin to the sides, but it can be fixed with your hand up and down. So we direct the air flow up, directly or down at will.

The Scarlett SC-DF111S08 fan does not work very noisy if you put exactly on the stand or firmly fix the trunk.

Quite suitable for blowing at the workplace, near the computer.

There is a big plus that the device is very light and collapsible (easy to carry, transport, store)

Do not expect super cooling from this model, but in the heat still drives air and cools a little. For those who are blown by: the first speed of the fan is completely weak, so you can not worry too much.

Of course, this desktop cannot be compared with the floor fan: there are more blades and more blows stronger. But I just have nowhere to keep him.

The assembly of course leaves much to be desired: it is clear that the manufacturer used the cheapest for the production of Scarlett SC-DF111S08. In my opinion, red

Conclusions: SCARLETT SC-DF111S08 Fan Affordable Option for cooling a house or at the workplace. For those who do not have air conditioning. So far I still recommend, despite the minuses. Let’s see how much still summer will work in front.

Fan fan SCARLETT SC-SF111B07. review

FIG knows whether this summer will be frozen, but we have already faded our friend and enjoy the desired coolness, because it got warmer on the street, and the batteries sprinkle like patients. Last year, he completely saved us, allowing us to survive in the murder. But first things first.

I chose the fan on the principle of “Yazhhedvochka”. I needed a cheap floor, not white fan without bells and ground. Selected from Scarlen seemed an ideal candidate. Variations were cheaper, but they didn’t suit me with something, so I paid for my. I bought it at the technop act in the store 1100 exactly a year ago.

I gave me my purchase in a branded rather compact box. Inside there was an extended fan equipped with instructions laid on the principle of tetris. collecting it for winter storage in the same box, I had to shift it three times until everything inside me fit inside. All parts for which you can lay out the fan can be seen on the assembly scheme.

Stadler form 3D Fan disassembly

The “one left” fan is assembled literally in seven minutes. It is also disassembled. Yajedka will cope on its own)) However, I ask my knight for help. He is pleased. After assembly, the fan needs to be connected to the network (stick the fork into the outlet) and that’s it, it is ready to work.

See also  PVC tile on a water heated floor

Turning on, shutdown and changing modes occur on the main panel, where only five buttons are: VCL/Off (on one), 3 speed modes. Each on their button and backlight (if you press it, dull heat-orange circle lights up on it).

scarlett, floor, assemble

I believe that it is needed so that in the dark it does not encounter a fan. But I see him well. The remote control is not attached to the fan, but I live well without it))

There is another button on the top of the “fan” with which you can make it rotate with your head or stop doing it. The range of “swaying” to the left and right is small, 90 degrees in total. However, this is enough for a comfortable work.

  • Cheap, however, for its price it is quite high.quality: support, legs, protective grid made of not thin painted metal; the managerial part and blades made of black quality plastic;
  • Pleasant appearance;
  • Stable non.problematic work (there is nothing to break either);
  • Compact storage in the native box. The box, by the way, is placed in the bed of the bed and there is still a place left there.

Features (the minuses to name them will not turn):

  • Without a remote control (this is written in the description of the goods on the site, for example, t.e. For me it was not a surprise. I immediately made a balanced decision, realizing that I would do without it);
  • During work, he collects all the dust, which can be washed only by dismantling the fans of the head;

Tips for choosing a fan:

  • Determine in advance what area the cooling should be calculated. Ours perfectly blowing a room in 19 squares and this is an abscess for him. And proceed from this parameter when choosing a fan.
  • Decide on the place where it will get up and choose the fan not as a separate item, but in combination with the rest of the situation. everything is white for me and the black fan looks foreign. However, what I myself chose, I live with that (anyway, I like it more than white and I do not regret the choice).
  • When choosing between more expensive and budget models, think about whether you need a fourth speed or remote control to the conder, and whether it is worth overpaying for it. Operating the mega-secret option, I am sure that no).

Well, and finally, a small trick on the “improvement” of the fan: in the most hellish heat, when even at the maximum speed it seems that there is no sense from the fan, tie the satin ribbons on the front lattice in front. They will cheerfully wander in the wind, psychologically convincing our brain that there is a strong wind and the desired coolness. And in the nursery, color elements will simply look bright and great.

Fan fan SCARLETT SC-SF111B23. review

In the summer, all people are divided into those who are hot and who blow. It so happened that I am among the last. It is me. The same harmful aunt, which always closes the windows and fights with colleagues because of the air conditioner in the office. Unfortunately, all this has to be done far from a harmful nature: by my 35 years I managed to accumulate such a solid amount of sores and kill immunity so much that any drafts are simply destructive for me. The slightest breeze. then the throat will get sick, then cystitis will worsen. Therefore, even in the summer, from all kinds of cooling devices, I try to stay as far as possible.

However, this summer even knocked me out of the rut. And when the thermometer has taken off above 35 degrees, I realized. you need to urgently do something. Of course, it was not even about installing the air conditioner. But against the fan, I no longer objected. And acquired by the budget fan Scarlett Comfort SC-SF111B23.

Producer country: China.

Place of purchases: store “Magn-cosmetics”.

The search for the fan, to my surprise, turned into a real epic. While I was thinking about the purchase, in all the nearest equipment stores, the fans dismantled how hot pies. I had to return home empty.handed. And already at the entrance to the house I was visited by a crazy thought. But do I go to the “Magnet Cosmetics”? If all sorts of mixers are sold there, then maybe there are fans too? And after all, the thought turned out to be true!

Of course, there was no choice, but I still managed to find a couple of fans in the window. Both. The same model. Scarlett Comfort SC-SF111B23. It was not quite what I wanted: I hoped to buy a fan more expensive, with a more expanded set of functions. But I had to be content with what was. And even rejoice at the fact that you managed to find at least something.

I have been familiar with Scarlett brand for a long time. And although he does not belong to the number of loved ones, it must be admitted that for its budget value, the equipment produces pretty good. At least four years of active use, it usually has enough. And since the fan. The technique is seasonal, it should work out much longer. This has become another weighty arguments in favor of this spontaneous purchase.

I could not consider the purchase in the store. The box was tightly sealed, and the consultant girls opened and showed the fan. Therefore, with unpacking I had to wait home.

The box, despite its impressive size, turned out to be very light. There were even concerns, but is everything in her place? The fan comes in completely disassembled, and it was quite likely that something could not report.

Judging by the inscriptions on the box, it is this party is designed specifically for the implementation of Magnit stores in the chain of stores. Although I saw exactly the same model later on Vildberris, and on Ozone, and Yandex Market. But the for it were already different, an order of magnitude higher.

The fears about the undercurrent were in vain: each part of the fan was packed in an individual cellophane bag, even a bag of bolts and screws was in place.

The instructions for operation and the warranty ticket were also not forgotten:

scarlett, floor, assemble

The assembly sequence is described in detail in the instructions, but it was so simple to assemble the fan that we did not even use it. And already fifteen minutes later in the middle of the room “grew up” such a handsome man:

The Scarlett SC-SF111B23 fan is equipped with three operating speeds, which will allow you to find the optimal mode for any weather conditions. The SC-SF111B23 floor fan is made in a neutral white and white design, which will allow it to fit into absolutely any interior. A high.quality protective grid makes the device as safe as possible to use, and the ability to adjust the height, angle of inclination and rotation will help any user to please any user.

SPECIFICATIONS:

Type: floor

Power, Tue: 40

Number of speed modes: 3

Block diameter, cm/inch: 40/16

Vertical adjustment, degrees: 30

Horizontal rotation, degrees: 75

Protective grid/lattice: high.quality protective grid

Height adjustment: yes

Maximum height, see: 125

Noise level: 52 dB

Color: white with blue

Outwardly, the Scarlett Comfort SC-SF111B23 fan is practically no different from other budget models. Corps, blades, grille, cross. Everything is like everyone else. Unless the color scheme is a little non.standard. White with blue. At first, she annoyed me slightly, because initially I wanted a plain fan. White or black. But in the process of use I got used to. over, over time, the color began to seem quite pleasant to me.

The fan housing is made of cheap plastic. This is noticeable even with the naked eye. The buttons on the case are also plastic, but they are pressed easily and freely, do not stick and do not seize. There are four of them in total: button on-switches and three buttons. Speed ​​switches.

I first took the holes in the lower part of the case for the ventilation grill. However, upon closer examination, it turned out that they are completely deaf and no functional load. In general, it is not clear why they are here. To give solidity or something?

Repair of a household fan on the example of Skarlet

If you have broken a household fan, do not rush to carry it for repairs and, moreover, throw it away. In some cases, malfunctions are so simple that they do not require special professional skills to eliminate them. In such circumstances, the repair of the room fan with your own hands does not take much time, and the savings of funds are significant. Calling the master at home now in some service services costs at least 300, not to mention work, replacement of details and the cost of the parts themselves in services.

See also  How to put a coffee vending machine in a hospital

The fan does not rotate. Check the presence of voltage in the outlet with a tester or multimeter. Or you can enable any proper household electrical appliance (iron, charger for a mobile phone and others) to diagnose outlet performance.

Having made sure the power in the outlet, unscrew the box cover with the switching buttons on the fan’s tripod.

Since the fan does not spin when the timer is turned on, and any of the speed buttons (0; 1; 2; 3), it is logical to assume that the voltage is not supplied to the switch or the electric motor is faulty.

In the box you will see a switch of rotation speeds of the electric motor and a mechanical timer (time relay). One power wire goes directly to the contact of the electric motor, the second through the timer and 4 buttons of the switch to various engine windings. First of all, it is necessary to check the reliability of the contacts of the switch and the integrity of the wires.

This can be done by a multimeter, checking the presence of voltage at the output of the timer. To do this, its switch must be in the “o” position. Then we turn on the speed buttons sequently, checking the voltage at the output of each button.

For safety reasons, it is recommended to check the integrity of the chain with a multimeter, in the dialing mode, without connecting the fan to the network.

In our case, testing shows that there is no circuit through the timer, so the indoor fan does not work due to the malfunction in the contact group of the timer.

Contacts are two copper plates, which are closed by the drive under the pressure of the rotating drive of the timer switch. When counting the set time, the drive enters into the slot on the disk blurring contacts. The absence of an electric circuit can be caused by wear of a drive mechanism that does not compress the plates or oxidized contacts enough.

Methods for eliminating a malfunction

The timer body is transparent, all mechanical gears, the drive and contact position is visible. The complexity of the independent repair of the timer is that it is not recommended to unscrew and open the lid.

The timer gear transmission mechanism has a cocked spring, the axes of the gears are pressed in the nests of the upper cover, which has stop elements. Opening the lid, you will free the spring, the gears will unwind and scatter in different directions. A similar repair of the room fan should be carried out with the skills of an hourly master.

Under domestic conditions, it is easier to carefully drill a hole Ø 5-8 mm above the contacts through which the plates can be bent or the contacts can be bent with tweezers. The hole for the timer will not affect, then it can be sealed with transparent tape. After the contact restoration, we turn on the fan and check the work in all modes, with a positive result, collect the structure in the original state.

If the drive mechanisms and the timer contacts cannot be repaired, it can be excluded from the circuit by connecting the wire directly to the input terminal on the “0” й ’button. This is where the fan repair is completed.

Do.it.yourself floor fan repair. All reasons why not spin and how to disassemble.

In the hottest summer days, the only salvation from the exhausting heat, is the usual floor fan.

Not everyone can afford a full.fledged split system or at least a mobile air conditioner.

But unfortunately, this inexpensive and affordable windmill, from time to time breaks. Especially fly like seeds Chinese models.

And there are vast majority in our market. What to do if the fan has stopped rotating and working? What are his main sores and because of which he breaks?

In total, 5 main reasons for the failure of floor fans can be distinguished:

The main problem of cheap models, which for some reason few people pay attention to. Incorrect casting blades. Because of this, an imbalance occurs, bearings are broken, gaps increase.

You can’t influence this in any way, as you already bought a fan with such an initial defect. Sometimes it seems to work, the impeller rotates normally, but does not blow.

That is, there is no cooling air flow from it. Why is it happening?

Due to the wrong corner of the attack of the blades. Its petals are deformed and drive an air flow in a circle, and do not throw it out.

This effect can appear over time, after the fan stood for a long time under the straight rays of the sun and its impeller heated, began to gradually change its shape.

It is treated only by replacing the impeller with a new.

The most common problem is the dried lubrication or its lack. The fan begins to wedge, lose speed and, as a result, the load on the engine increases. Vetrodui no longer works in full force.

The engine wound up with a thin wire of 0.2mm begins to heat up and the windings gradually burn out.

How a similar defect is detected? In this case, the fan ceases to rotate. He is buzzing, but the impeller does not spin.

It also happens that it starts only at 3 speed, and does not react to the first two at all. He just does not have enough power to turn the shaft.

In order to start it, you have to sprout like on old aircraft in an impudent.

By the way, the same symptom may be with damage to the start.up capacitor. How to find out without devices what reason is to blame for the breakdown?

To do this, at least get to the engine shaft, removing the protective casing and blades. If the shaft by hand will rotate with great difficulty, then blame dirt and dried grease.

Основные ошибки при шпатлевке стен и потолка. #35

And if he spins easily and he has inertia, then most likely a conder was covered. Symptom. turned on the fan in the outlet, but it does not spin. At the same time, scroll into a impudent motor and it starts.

If you hold the fan blades when working with your hand, it can stop again. The capacitor is checked by a multimeter if it has an appropriate capacity measurement scale.

To replace, select a new conder according to the same parameters that are indicated on the body of the old.

By the way, a dried.up capacitor has not yet been fully affected, also affects the moment. If you notice that they fell from you and the fan began to spin slower, this is a bell to check it.

The problem of tight rotation is solved by a new lubricant of bearings. Here are used, the so.called sliding bearings. Someone calls them bushings.

Apply balls in such designs is expensive, and they thunder over time, they be healthy. For repair it is not at all necessary to disassemble the entire engine entirely. It is enough to unscrew a few cogs and spray to the right places with the universal aerosol WD40.

How to get to the bushings without removing the engine? To get started, unscrew the central screw on the back wall of the protective casing.

Another self-tapping screw is hidden in the adjustment button for turning or stopping at the fan head.

After that, the back cover is easily removed from its place. What is under it? Here you can see the gearbox of the rotary mechanism that gives rotation to the whole head.

Author

Laidred

| Denial of responsibility | Contacts |RSS