Home Water heaters Collector’s cupboard for underfloor heating dimensions
Water heaters

Collector’s cupboard for underfloor heating dimensions

Collector Cabinets

Manifold cabinet is a metal structure that houses the unit of the floor system. The manifold regulates the flow of the heating medium and provides the optimum temperature regime.

No modern and well-designed heating and water system can be designed without a manifold (distribution) cabinet. Sturdy metal construction hides piping systems, hot/cold water and heat meters, shut-off valves and electrical equipment of various types.

Built-in distribution cabinet (internal SHRV)

collector, underfloor, heating, dimensions

Manifold Cabinets

Often searched for: Assembled; Type of Item: Manifold; Brand: Stout; Application: For mounting a manifold; Case Material: Steel; Installation Method: Exterior; Steel Type: Galvanized; Width: 554; Height: 651 (691); Depth: 120;

Often searched for: In the assembly; Type of goods: Cabinet collector; Brand: Stout; Application: For mounting a collector; Case Material: Steel; Installation method: Built-in; Steel Type: Galvanized; Width: 744; Height: 670 (760); Depth: 125 (195);

Product Type: Collector Cabinet; Brand: Stout; Case Material: Steel; Width: 1004; Height: 651 (691); Depth: 120; Weight: 14,2;

Often searched for: Assembled; Type of Item: Cabinet collector; Brand: Stout; Application: For the installation of the collector; Case Material: Steel; Installation method: Outdoor; Steel Type: Galvanized; Width: 704; Height: 651 (691); Depth: 120;

Product Type: Collector Cabinet; Brand: Stout; Body Material: Steel; Width: 854; Height: 651 (691); Depth: 120; Weight: 10.5

Emmeti TM3 Underfloor Heating Controller

Often searched for: In the assembly; Product Type: Cabinet collector; Brand: Stout; Application: For the installation of the collector; Enclosure Material: Steel; Installation method: Outdoor; Steel Type: Galvanized; Width: 454; Height: 651 (691); Depth: 120;

Often searched for: In the assembly; Type of goods: Cabinet collector; Brand: Stout; Application: For mounting a collector; Case Material: Steel; Installation method: Built-in; Type of steel: Galvanized; Width: 594; Height: 670 (760); Depth: 125 (195);

Often searched for: Assembled; Type of Item: Manifold; Brand: VALTEC; Application: For the installation of the manifold; Case Material: Steel; Installation method: External; Type of steel: Galvanized; Width: 454; Height: 651 (691); Depth: 120;

Often looking for: As a complete; Product Type: Manifold; Brand: VALTEC; Application: For manifold mounting; Body material: Steel; Installation method: Built-in; Steel type: Galvanized; Width: 594; Height: 670 (760); Depth: 125 (195);

Often searched for: Assembled; Product Type: Manifold; Brand: VALTEC; Application: For mounting a manifold; Enclosure Material: Steel; Installation Type: External; Steel Type: Galvanized; Width: 704; Height: 651 (691); Depth: 120;

Often searched for: Assembled; Type of Item: Manifold; Brand: VALTEC; Application: For mounting a manifold; Body material: Steel; Installation method: Outdoor; Steel Type: Galvanized; Width: 554; Height: 651 (691); Depth: 120;

Often searched for: In the assembly; Product Type: Cabinet collector; Brand: Stout; Application: For the installation of the collector; Enclosure Material: Steel; Installation method: Built-in; Steel Type: Galvanized; Width: 494; Height: 670 (760); Depth: 125 (195);

Often searched for: Assembled; Type of Item: Manifold; Brand: VALTEC; Application: For mounting a manifold; Case Material: Steel; Installation method: Built-in; Steel Type: Galvanized; Width: 744; Height: 670 (760); Depth: 125 (195);

See also  How to calculate the length of a floor heating loop

Often searched for: Assembled; Type of Item: Manifold; Brand: VALTEC; Application: For mounting a manifold; Body material: Steel; Installation method: Built-in; Steel type: Galvanized; Width: 494; Height: 670 (760); Depth: 125 (195);

Description, features and characteristics

In TOIR-M, the box body is made of thin sheet steel, and welding is used for this purpose. Then the product is coated with powder enamel, protecting it from corrosion and aggressive environment. There is also an internal lock, because the collector system is not cheap, so it is worth locking it from unauthorized persons.

To maximize ease of installation, the water supply manifold cabinet has side perforated. They are divided into sections, only the necessary ones are used. Rear panel is equipped with brackets. On them attach all the necessary elements of the manifold system of heating or floor heating.

Height adjustable with pull-out metal legs. Can be used to raise or lower the construction by eight. ten centimeters. They also have holes that allow you to “nail” the manifold cabinet to the floor.

Note that our products are designed for use in buildings at room temperature from 1 to 40C. Do not prohibit wet cleaning in the drawer. We only recommend the use of non-corrosive detergents.

We recommend that collector boxes be transported and installed with care. Because scratches and impacts on the body can damage the protective coating and reduce the service life of the product.

Manifold box for heating: features

Some people think they can connect a heating or underfloor heating system without a drawer. This is true, but there are a number of reasons why you should still buy this product.

  • Fits beautifully into the room. Without the technical cabinet, pipes and heating system elements would be immediately visible. And it’s quite another thing when everything is stacked nicely in one drawer, covered with a neat door.
  • Easy to service. If, over time, repairs are necessary, the design of the collector box greatly facilitates this procedure.
  • Built-in lock. If we are talking about the house, a locked box can protect the equipment from curious children, and will keep them from getting burned.
  • Affordable price. The heating manifold cabinet is inexpensive, so there is no point in saving on it.
  • Protects equipment. The product performs the role of body armor and will save its contents in case of fire, mechanical damage, etc.п.

Main features

  • the body is made of high-quality cold-rolled sheet steel, and this prevents its deformation, even if the manifold cabinet has the size 860x650x120 mm;
  • made a special peoratornye holes on the side, facilitating mounting;
  • The front panel can be removed if necessary;
  • it is possible to lock the box with a key to prevent unauthorized access to its contents;
  • retractable legs allow you to adjust the height of the construction by 8-10 cm.

Available sizes manifold cabinets

We are ready to make a custom-made product. But there are also the template models. Namely:

Note that the latter size is only available for built-in versions of the product.

Distribution (manifold) cabinet SHRV, SHRN

Distribution (manifold) cabinets are available in two different modifications:

  • Built-in switch cabinets. This type of manifold cabinets is used for concealed installation in heating and water supply systems. Built-in manifold cabinets can also be installed in a special opening or wall niche for tiling;
  • Outdoor distribution cabinets. Collector’s cabinets of this type mounted outside on the floor or close to the wall surface.
See also  No gas in the gas water heater

Whichever manifold cabinet you choose to install an outdoor (SHRN) or indoor (SHRV) distribution cabinet, installing this unit will allow you to optimally camouflage the collectors. Neutral white collector closet (SHRN, ShRV) does not attract unnecessary attention, looks quite aesthetically pleasing and does not spoil its appearance.

Advantages of a switchgear cabinet

Collector‘s cabinet for heating is a practical and necessary thing also for the following reasons:

  • Its use makes it possible to reduce the number of pipes needed to connect the underfloor heating. Pipes do not need to be pulled from the heater, as the manifold can be placed in the same room.
  • In addition to the manifold installation, the cabinet can also be for the water supply, it is installed means of fluid metering.
  • When repairing or modernizing the heating system with easy access to the guide circuit.
  • Safety is one of the most important points. A keyed door will help keep the manifold cabinet with expensive components out of the reach of children.

Varieties

Depending on the method of location and design, all floor heating manifold cabinets are divided into built-in and outdoor. The first group is represented by models concealed in niches, under the sheeting of plasterboard or inside building structures. These cabinets often have removable covers, unpainted sides with output slots and fasteners. They can be hung in pre-prepared niches or installed on the floor, on retractable legs or flush with the flooring.

External, aka overhead manifold cabinet, is mounted directly on the wall, without the need to remove the outer cladding. Such models have the same type of coating on all sides. Choosing this option, it is worth knowing that the manifold group is always freely accessible, there is an adjustment of the heating system, so there is no problem with tracking the status of devices.

Cabinet sizes and fittings

The dimensions of the products are standard. The segment of some companies is represented by compact models, the width of which is 45 cm and a depth of 18 cm.

The standard list of components includes:

  • The body. Represents a box of stainless steel or plastic. No rear wall. Slots on the sides and bottom panel are provided for pipes.
  • Fixings. The mechanism is installed based on the location of the design. on the surface or in the center of the wall. Spacers or anchors are used for fixing. Some models have fixed brackets and clamps.
  • Doors. They protect internal devices of the heating system from damage and prohibited entry. Fastened by means of hinges. Doors are equipped with a lock or a latch.

The box for the distribution unit can be made by yourself. But the assembly by hand is not justified, since the price of most devices on the market is low. It is recommended to purchase finished products.

  • Its body is made of metal, protected by powder paint, which is not afraid of either moisture or high temperatures. Note that not all models have a back wall. It is available in TOIR-M products! The side walls of high-quality collector cabinets contain all the necessary mounting holes for connecting pipes.
  • The system of fasteners. To install a manifold cabinet for the floor heating as easily as possible, special clips, struts, holes for anchors, brackets and other elements for installing and fixing the components of the system are needed. Note that they may vary, depending on the type of product.
  • Door. In our company’s models, it also comes with an internal lock. The door enables to hide the content of the box and protects it from unauthorized persons. By the way, the default color is gray, but you can choose any of the RAL. After all, the right shade plays a decisive role in interior design.
See also  How to correctly calculate the water underfloor heating

You can make a manifold cabinet with your own hands, but its cost is available to everyone. Therefore, it is easier and faster to buy.

Cabinet for a manifold floor heating in Kaluga

The system of independent water heating consists of set of elements, each of which plays an important role, provides stability of work of separate knots and system as a whole. One of the main elements of the manifold cabinets for underfloor heating, which are used to place the control equipment and automation devices. A large selection of these cabinets is presented in our online store. Manifold cabinets can become a harmonious addition to the interior of any room. They are mounted pipe connections and individual circuits of the heating system, circulation pumps, valves, devices for monitoring and maintaining the desired parameters of the coolant.

Choose a subcategory

Homeland of brand:Italy Material:steel Plating:powder-coated Number of outlets:1-3 Appointment:Heating, water supply

Homeland of brand:Italy Material:steel Plating:powder-coated Number of outlets:11-12 Destination:heating, water supply

Country of Origin:Italy Material:steel Material:powder-coated Number of outlets:4-5 Designation:heating, water supply

Country of Origin:Italy Material:steel Material:powder-coated Number of outlets:6-7 Application:Heating, water supply

Country of Origin:Italy Material:steel Material:powder-coated Number of outlets:8-10 Appointment:Heating, water supply

Homeland of brand:Italy Material:steel Plating:powder-coated Number of outlets:1-3 Appointment:Heating, water supply

Brand Country:Italy Material:steel Material:powder-coated Number of outlets:11-12 Destination:heating, water supply

Where is the brand name:Italy Material:steel Plating:powder-coated Number of outlets:13-16 Application:Heating, water supply

Country of Origin:Italy Material:steel Material:powder-coated Number of outlets:4-5 Application:Heating, water supply

Homeland of brand:Italy Material:steel Plating:powder-coated Number of outlets:6-7 Application:Heating, water supply

Homeland of brand:Italy Material:steel Plating:powder-coated Number of outlets:8-10 Designation:heating, water supply

Origin of the brand:Italy Material: steel Material: powder coating Number of outlets: 13-16 Appointment: Heating, water supply

Country of Origin:Italy Material:steel Material:powder-coated Number of outlets:17-18 Purpose:Heating, water supply

Brand:Italy Material:steel Plating:powder-coated Number of outlets:19-20 Purpose:Heating, water supply

Brand:Italy Material:steel Plating:powder-coated Number of outputs:1-3 Appointment:Heating, water supply

Author

Kerariel

| Denial of responsibility | Contacts |RSS