Home Washing machines Cleaning the Ariston HotPoint washing machine
Washing machines

Cleaning the Ariston HotPoint washing machine

Self.cleaning function of the washing machine Hotpoint Ariston

I teach household appliances repair masters! Salary from 80,000 !

Any washing machine (SMA) Ariston is equipped with many functions that do not immediately understand. Lucky if there are not only graphic designations on the control panel, but also the names of programs and modes. this simplifies the use of the device. It is more difficult to master the language of graphics. some icons are incomprehensible, you have to decipher them to get acquainted with all the possibilities for see. We will find out what are the washing modes in the Ariston models and how they were designated by the manufacturer.

The main modes of Ariston

They are most often used. But do not forget that the capabilities of the lubricants are not limited to the main modes. besides them, there are also a lot of functions to adjust the conditions of the process.

  • Strongly contaminated things are erased in water heated to 90 ° C. Pushing at maximum revolutions.
  • For color things from x/b and linen. Heating. 60 ° C.
  • For not very dirty things. You can wash delicate fabrics
  • 165
  • 140
  • 90

Complex cleaning

Complex cleaning of the machine includes a number of measures aimed at cleaning all components and parts of the unit, and not only some individual. The easiest way to keep the machine is clean is to clean the washing machine from above.

During operation, spots from bleach, water and washing powder inevitably appear on its surface. Clean such contaminants conveniently with a damp cloth. It will be better if you add a detergent for dishes to the water.

The washing drum must be regularly cleaned from the inside, especially if there is an unpleasant odor. The car is filled with water, pouring into the drum pre.cleaner or bleach. The washing cycle is turned on for a short time so that the product dissolves in water and then turns off, leaving the car for an hour. This will help remove dirt, mold and unpleasant odor.

It is recommended to clean the washing machine at least once every three months, otherwise due to accumulated debris and lime deposits, the drain system will stop working and the technique will fail. Filters and hoses cleaning. the procedure is no less important than cleaning the heater or drum.

The filter is located behind the panel, and there is also an emergency hose. Water should be drained from it and then, you can dismantle the filter. The main thing is to carefully clean the impeller from debris and plaque of dirt, and then rinse. After washing, the filter is installed in the same place.

When cleaning the machine, do not forget about the heater. Ten. It should also be periodically cleaned from scale, otherwise it will begin to overheat and eventually burn. The heating element can be removed and cleaned manually. The main thing is not to scratch and not damage its body.

Signs of clogging

Иногда о необходимости провести очистку можно узнать по определённым признакам. If available, it is necessary to take the necessary measures. It is important to pay attention to the following:

  • If the washed things acquire an unpleasant odor. Typically, the cause of this is a strong clogging of the drain filter.
  • The rate of water drain is significantly slowed down.
  • Built.in diagnostics issues an appropriate error code.

In the presence of these signs, cleaning the filter should be done as soon as possible. Otherwise, the risk of car breakdown increases.

How to start self.cleaning of Ariston washing machine

During operation, Ariston, like other models, is clogged with garbage, getting inside from the water pipe, and a crocheted, settling on the internal parts of the Ariston unit and its water heating element.

Actions are performed in the following sequence:

  • The underwear inside the drum is extracted;
  • a powder receiver opens;
  • A latch is pressed in the center, the tray for detergents is extracted. This measure will improve powder access to the Ariston car;
  • Kalgon is poured into the hole.

We activate the cleaning process, for which we press the “fast washing” and “re.rinse” keys. We monitor the symbols on the screen. First of all, the letters AUE appear, after that. UEO, in conclusion. EOC.

You will hear a squeak in the Ariston washing machine, the hatch will be broken down. Water supply will begin in the drum. This means that the launch of the Ariston car was successfully carried out, the function earned.

Using this program, the Ariston technique cleanses the scale from the heater, cleans the hoses from probable clogs, disinfects the drum, eliminates the mold inside. If such measures are performed regularly, Ariston car will last you a long period.

Repair of the washing machine HotPointAriston VMSF 6013 b

The network of off-site repair shops of household appliances “Rembetteh” performs the repair of the washing machines HotPoint-Ariston VMSF 6013 B at the house of the customer. The brigades of our specialists work in all areas and in most cities of the neighbor, even living in the region, you do not have to overpay for the distance from the Moscow Ring Road when calling the master. Our specialist will come to you at any convenient time from 8 to 22 hours and, if necessary, within a day after calling.

Any technique over time requires cleaning and prevention. The self.cleaning mode of the washing machine is a special function that allows you to clean the unit from plaque of fat, dirt and other contaminants.

The “Self.cleaning” mode present in most modern washing machines was developed by the manufacturer specifically for removal, which remain in the drum and tank of insoluble substances.

Important: the drum must be cleaned at least once a year. If washing is carried out more often, then cleaning is required more often. Then the quality of washing will correspond to the norm, and the car will remain in working condition for many years.

To clean the machine using the self.cleaning function, it is only necessary to start this program and wait until it is executed, it should be remembered that it cannot cope with a scale, but will only remove mold and fat from the inner surfaces of the washer.

To use the function of self.cleaning, you need:

  • Remove from the drum if they lie there;
  • Close the loading hatch and press the button on the “Food” panel;
  • If the model does not have a clear “self.cleaning” mode, then press the “” button and hold it for at least three seconds. The inscription “TEI” should appear on the display. that is, the drum self.cleaning mode will turn on;

Upon completion of cleaning, you should turn off the machine from the network and open the loading hatch for ventilation and drying.

The independent cleaning program cleans the machine from the inside and saves it from the particles of the pile, wool and extraneous objects. Since the regime provides for the operation of the unit at a temperature of 60 degrees, at a speed of up to one hundred and fifty revolutions per minute, its owner practically does not have to use purchased or folk cleaning tools.

Self.cleaning from the point of view of the unit is as follows:

  • Prewash;
  • The main washing (temperature is already 60 degrees and rotation speed of 150 rpm;
  • Double rinse and squeeze.

Experts recommend making such prevention at least once a month. Important: manufacturers of most washing machines do not recommend the use of chemicals when cleaning the unit, in particular means for removing lime plaque and washing powders. An excessive amount of foam formed in cases of their use can lead to a washing leakage.

Many cars have a special button, pressing which the self.cleaning process is immediately activated. The ban on the use of a self.cleaning program, together with things in the drum, is due to the fact that when performing this program, the machine accelerates to high speeds, the drum makes uneven and sharp movements. If there is linen in it, and it and the machine itself can suffer.

Auto clean for Hotpoint ultima WDUD 9640 96kg

How to clean the technique?

Water water is often not suitable not only for eating, but also for washing. It contains a large amount of impurities. Hard water leads to the formation of scale on the heater and tank of the washing machine. If the water for drinking is filtered in almost every apartment, then the cleaning elements in front of the bulk hose of washing rooms install units.

If you do not clean the smoke from the deposits in a timely manner, then the thick layer of scale will lead to the output of the heating element.

That is why it is important to periodically start cleaning the automatic machine. It is allowed to use special household chemistry or use folk “recipes”. Regular flushing of washing with citric acid will reduce the likelihood of scale to a minimum. Everything is quite simple, you should regularly launch an idle wash, after pouring 200 grams of lemon into a powder container for a powder container. It is necessary to include a long program providing for water heating from 60 ° C.

After the end of the cycle, be sure to rinse the garbage filter, powder receiver. It may also be necessary to clean the sealing cuff from pieces of “torn” scale. If the heater is covered with a thick layer of scale, you can process this element specifically. For this, the heater is extracted from the machine and cleaned mechanically or using special components.

Drilling filter cleaning instructions

To clean the clogged node, the following actions will be required:

  • A little back the Ariston washing machine, put rags and place a fluid container under it;
  • Scrolling counterclockwise the filter cover, neatly turn until the water is pouring;
  • wait for the complete drain of the liquid;
  • unscrew the knot completely and pull it out;
  • First, large garbage must be removed from the part: dirt, foreign objects, pieces of fabric, thread, etc.D.;
  • Next, remove the deposited plaque with a hard sponge, and if it is formed in large quantities, then you can soak the structure in a solution of citric acid;
  • Rinse the drainage filter under running warm water qualitatively.

It is forbidden to use boiling water for washing, because you can deform plastic or damage the sealing gum.

After cleaning, you need to take a flashlight and inspect the planting nest. If garbage and pollution is detected, it will be necessary to carefully clean it with a damp sponge or clean rag.

After the cleaning is completed, the filter should be installed in the same place. To do this, it is necessary to put it exactly in the nest and gently screw it clockwise, avoiding distortions. After that, you can return the Ariston washing machine to the same place, connect to the network and communications and start a trial washing to check the device.

Drilling filter cleaning instructions

To clean the clogged node, the following actions will be required:

  • A little back the Ariston washing machine, put rags and place a fluid container under it;
  • Scrolling counterclockwise the filter cover, neatly turn until the water is pouring;
  • wait for the complete drain of the liquid;
  • unscrew the knot completely and pull it out;
  • First, large garbage must be removed from the part: dirt, foreign objects, pieces of fabric, thread, etc.D.;
  • Next, remove the deposited plaque with a hard sponge, and if it is formed in large quantities, then you can soak the structure in a solution of citric acid;
  • Rinse the drainage filter under running warm water qualitatively.

It is forbidden to use boiling water for washing, because you can deform plastic or damage the sealing gum.

After cleaning, you need to take a flashlight and inspect the planting nest. If garbage and pollution is detected, it will be necessary to carefully clean it with a damp sponge or clean rag.

After the cleaning is completed, the filter should be installed in the same place. To do this, it is necessary to put it exactly in the nest and gently screw it clockwise, avoiding distortions. After that, you can return the Ariston washing machine to the same place, connect to the network and communications and start a trial washing to check the device.

How to clean the technique?

Water water is often not suitable not only for eating, but also for washing. It contains a large amount of impurities. Hard water leads to the formation of scale on the heater and tank of the washing machine. If the water for drinking is filtered in almost every apartment, then the cleaning elements in front of the bulk hose of washing rooms install units.

If you do not clean the smoke from the deposits in a timely manner, then the thick layer of scale will lead to the output of the heating element.

That is why it is important to periodically start cleaning the automatic machine. It is allowed to use special household chemistry or use folk “recipes”. Regular flushing of washing with citric acid will reduce the likelihood of scale to a minimum. Everything is quite simple, you should regularly launch an idle wash, after pouring 200 grams of lemon into a powder container for a powder container. It is necessary to include a long program providing for water heating from 60 ° C.

After the end of the cycle, be sure to rinse the garbage filter, powder receiver. It may also be necessary to clean the sealing cuff from pieces of “torn” scale. If the heater is covered with a thick layer of scale, you can process this element specifically. For this, the heater is extracted from the machine and cleaned mechanically or using special components.

The principle of operation of washing machines

First, it is recommended to figure out how any washing machine works. Water is supplied through the filter and valve to the unit. The output valve controls the hatch lock, which works when linen will be loaded and contact on the hatch is activated. Water level relay regulates its supply to the drum.

Then the water and rotation of the engine are heated. All stages of washing are activated according to the specified time in case of one or another mode. Water drain from the system occurs through the drain pump.

Having sorted out the washing machine, you can pay attention to various reasons in its incorrect work. It all starts, as a rule, with the simplest checks:

  • Whether the fork of the power supply wires on the network is included.
  • Is there any electricity in the outlet. Checking this is quite simple: it is enough to include another electric device in the outlet, for example a nightlight.
  • Cord and forks are checked. To do this, inspect them. They should be without damage, not have a burning or melting. Sometimes this is one of the reasons why the Ariston car does not turn on.

In this situation, it is forbidden to include the car again in the network. Cord repair is to replace it. It is purchased in special stores for household appliances. After acquisition, it is replaced. If the check did not give results, then the reasons must be sought inside the washing machine itself.

Wear of the engine brushes

In collector engines, brushes are responsible for transmitting voltage from stator to rotor. As they decrease, the engine power weakens, which is why the drum rotates only at low speeds or does not rotate at all.

Signs How to eliminate Price
Ariston is not gaining momentum on an annex or does not twist the drum at all. Perhaps the engine sparkles. Damage is often accompanied by errors F01, F02. Brushes with a length of less than 1 cm are subject to replacement with new. from 1500

Price only for the work of the master, excluding the cost of spare parts.

How to drop a program on a washing machine

Each washing assistant is equipped with a computer responsible for installing the washing mode, temperature, spin and drain.

Sometimes, if the program has lost in the washing machine, then it can stop washing, constantly dragging and draining water, not heat or arrange eternal rinse to loaded things.

In a similar situation, when the program fails in the washing machine, you need to contact the management guide. Despite the variety of models and manufacturers, the settings from the machines are almost the same. So, the reset of the Indesit, Samsung or Ariston washing machine is carried out by holding the “launch” button.

To reset Ariston and set up washing machines from other manufacturers, you need to wait until the indicators on the control panel light up and then go out. Then you need to re.enable the device and set a new washing program.

Thus, the settings are reset, if before that, the error (the corresponding code) has appeared on the control panel, then it is enough for you to restart the Indesit washing machine and the additional resurption of the program will not be required.

Some models of washing machines provide for a program for diagnosing faults. In these cases, the reset of the error of the washing machine will not help until the technical reason (breakdown) is eliminated. If your Indesit washing machine hangs when rinsing and this problem is related to the error of the program, then click the start button and wait for the shutdown of all indicators.

Calling the master

Master for diagnosis, repair leaves by preliminary application. You can make a call by phone or through the feedback form on the site. Tell the service manager the following information:

  • Brand, model of washing machine (see in the instructions, on the case).
  • What happened when, after which, the main symptoms of breakdown (it is necessary to select the tool that components before leaving).
  • The optimal time for repair.
  • Contact details.

Why a malfunction occurred, and what to do, the master will say only after the departure and inspection of the washing machine. Most of the breakdowns are eliminated within 1-2 hours, the removal of equipment to our service is not required. Immediately after the repair is completed, the washing machine will be ready to work. In rare cases of repair, it may take more time, a repeated visit of the master. Ready to order any components, carry out complex software repairs, but this often increases the timing.

The exact price of the repair of the washing machine is determined taking into account its model, such as the causes of the malfunction. In the section “Price” you will find approximate financial conditions for cooperation, the exact master will call after checking. Diagnosis does not oblige to order services from us, but in this case it will be paid.

Zasor factors and its types

There are two types of blockage:

Most often, a mechanical blockage appears after small objects from the outside entering the filter. Therefore, before the start of each washing, carefully inspect your clothes and the drum itself for the presence of such things:

The filter blockage also occurs naturally. After each washing, villi, wool, fluff or particles of synthetic winterizer accumulate in the plum.

After a strong blockage, the water passes poorly through the drain, which can cause a software failure of the washing machine, and the device will refuse to rinse or squeeze out. As a result, the car can completely fail.

What will happen if you do not clean

If you do not carry out the maintenance of the washing machine Hotpone Ariston and do not perform periodic cleaning of the filter, the consequences can be very unpleasant.

  • First, an unpleasant smell appears. It comes not only from the Ariston washing machine, but also from the underwear that was washed in it. This is because the accumulation of garbage and dirt leads to the appearance and rapid propagation of bacteria and microbes. As a result of their activity, mud deposits are acidified, this leads to the appearance of a stench.
  • Secondly, the accumulation of dirt leads to the appearance of bacteria and mold. Having filled out Ariston washing machine, they will begin to poison the air in the bathroom or in another room where the device is located. This can lead to serious diseases.
  • Thirdly, the operation of the drain system due to the formation of blockages is violated. If you do not pay attention to such a breakdown, the part will be polluted completely and as a result, Ariston washing machine will sooner or later stop draining the water in the process and at the end of washing.
  • Fourthly, a pump will break or malfunctions will arise in its work. From the drain filter, garbage can get into the pump. In the best case, extraneous objects will stop the work of the pump, in the worst. will damage the impeller or the pump body. It will be necessary to carry out an expensive repair or completely change the knot.

HotPoint Ariston dishwasher detailed instructions and possible malfunctions

HotPoint Ariston dishwasher. instructions for operating the unit gives the main recommendations for working with this device. This assistant to the hostess, like many other units, requires careful attitude. Complex household appliances should be used correctly.HotPoint ariston dishwasher (photo source. Yandex.Pictures) Put

Any technique over time requires cleaning and prevention. The self.cleaning mode of the washing machine is a special function that allows you to clean the unit from plaque of fat, dirt and other contaminants.

The “Self.cleaning” mode present in most modern washing machines was developed by the manufacturer specifically for removal, which remain in the drum and tank of insoluble substances.

Important: the drum must be cleaned at least once a year. If washing is carried out more often, then cleaning is required more often. Then the quality of washing will correspond to the norm, and the car will remain in working condition for many years.

To clean the machine using the self.cleaning function, it is only necessary to start this program and wait until it is executed, it should be remembered that it cannot cope with a scale, but will only remove mold and fat from the inner surfaces of the washer.

To use the function of self.cleaning, you need:

  • Remove from the drum if they lie there;
  • Close the loading hatch and press the button on the “Food” panel;
  • If the model does not have a clear “self.cleaning” mode, then press the “” button and hold it for at least three seconds. The inscription “TEI” should appear on the display. that is, the drum self.cleaning mode will turn on;

Hotpoint Aquarius WDL520 Washing Machine Demonstration

Upon completion of cleaning, you should turn off the machine from the network and open the loading hatch for ventilation and drying.

The independent cleaning program cleans the machine from the inside and saves it from the particles of the pile, wool and extraneous objects. Since the regime provides for the operation of the unit at a temperature of 60 degrees, at a speed of up to one hundred and fifty revolutions per minute, its owner practically does not have to use purchased or folk cleaning tools.

Self.cleaning from the point of view of the unit is as follows:

  • Prewash;
  • The main washing (temperature is already 60 degrees and rotation speed of 150 rpm;
  • Double rinse and squeeze.

Experts recommend making such prevention at least once a month. Important: manufacturers of most washing machines do not recommend the use of chemicals when cleaning the unit, in particular means for removing lime plaque and washing powders. An excessive amount of foam formed in cases of their use can lead to a washing leakage.

Many cars have a special button, pressing which the self.cleaning process is immediately activated. The ban on the use of a self.cleaning program, together with things in the drum, is due to the fact that when performing this program, the machine accelerates to high speeds, the drum makes uneven and sharp movements. If there is linen in it, and it and the machine itself can suffer.

What means we will use?

Before turning on self.cleaning, you should stock up on a suitable cleaning agent. Ordinary powder is not suitable. a special composition is needed, which is bought separately. It is better not to experiment with stamps, but to choose already proven cleaners.

  • A liquid agent produced in Japan and capable of cope with soapy raid, fungus, scum and other dirt. It is implemented in bottles of 550 ml, which is enough for a single cleaning of the car with a capacity of up to 9 kg. The cost varies between 6-6.3 dollars.
  • Japanese tablets with recognized efficiency. Remove any pollution and attract relatively low price. A pack with 5 tablets costs about 2 dollars.
  • Dutch powder against mold for any type of washing. Sold in packs of 0.162 liters for 10 dollars.

Before use, you must familiarize yourself with the instructions on the packaging and strictly follow the given dosages. Otherwise, the desired effect will not be achieved, and an expensive tool will spend in vain.

In an effort to save, some housewives begin to “cunning” and look for an alternative to expensive powder among improvised means. Tips and recommendations are on the Internet, however, not all of the listed “analogues” can be considered effective and safe.

So, most often on the forums, when turning on the self-cleaning mode, they use whitewash, various acids and a Coca-Cola drink as a detergent. Unfortunately, none of the listed liquids will save, on the contrary, will damage the machine and entail additional expenses.

  • White. It is rightfully considered a powerful and effective cleaner and, thanks to concentrated chlorine in the composition, will quickly wash dirt and scale from the “insides” of the automatic machine. However, there is a significant “but”. the substance greatly corrodes the rubber parts, which will lead to breakdowns and leaks.
  • Acids. Like the whiteness, they will cause significant damage to rubber cuffs and gaskets of the machine. Plus, metal components will also suffer: the drum will darken, shaft and heating. Some users burned with liquid and drain hose.
  • Cola. Famous for purifying qualities, but the existing concentration of active substances is not enough to completely clean the machine. It will take about 15-20 liters, which is many times more expensive than special equipment.

Read more: Covering material Spanbond 31 photos Black and other types of their technical characteristics which side is correct to cover how to use white spanbond

It makes no sense to save on a machine gun cleaning. Aggressive and unverified chemistry will do more harm than benefits. It is highly likely that budget experiments will bring to the point that you will have to purchase a new washing machine.

Author

Laidred

| Denial of responsibility | Contacts |RSS