Home Article Cisco glc lh smd compatibility. Cisco glc lh smd compatibility
Article

Cisco glc lh smd compatibility. Cisco glc lh smd compatibility

Cisco SFP Modules for Gigabit Ethernet Applications Data Sheet

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Download Options

  • Product overview
  • Features and benefits
  • 100/1000BASE-LX SFP for long-reach single-mode fibers
  • SFP Operation at 100M
  • 2-Channel 1000BASE-BX10-D for single-fiber bidirectional applications
  • Product specifications
  • Ordering information
  • Warranty
  • Cisco environmental sustainability
  • Regulatory and standards compliance
  • Next steps
  • Cisco Capital
  • Document history

Cost-effective Small Form-Factor Pluggable (SFP) transceivers for Gigabit Ethernet applications

The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter (Figure 1) links your switches and routers to the network. The hot-swappable input/output device plugs into a Gigabit Ethernet port or slot. Optical and copper models can be used on a wide variety of Cisco products and intermixed in combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX, 1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.

Cisco Optical Gigabit Ethernet SFP

Cisco 1000BASE-T Copper SFP

Cisco 2-Channel 1000BASE-BX Optical SFP

Hot swappable to maximize uptime and simplify serviceability

Flexibility of media and interface choice on a port-by-port basis, so you can “pay as you populate”

Robust design for enhanced reliability

Supports Digital Optical Monitoring (DOM) capability

1000BASE-T SFP for copper networks

The 1000BASE-T SFP operates on standard Category 5 unshielded twisted-pair copper cabling of link lengths up to 100 m (328 ft). Cisco 1000BASE-T SFP modules support 10/100/1000 auto negotiation and Auto MDI/MDIX.

1000BASE-SX SFP for multimode fiber only

The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.

1000BASE-LX/LH SFP for both multimode and single-mode fibers

The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable. For details on this implementation, refer to https://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.

1000BASE-EX SFP for long-reach single-mode fibers

The 1000BASE-EX SFP operates on standard single-mode fiber-optic link spans of up to 40 km in length. A 5-dB inline optical attenuator should be inserted between the fiber-optic cable and the receiving port on the SFP at each end of the link for back-to-back connectivity.

1000BASE-ZX SFP for long-reach single-mode fibers

The 1000BASE-ZX SFP operates on standard single-mode fiber-optic link spans of up to approximately 70 km in length. The SFP provides an optical link budget of 21 dB, but the precise link span length depends on multiple factors such as fiber quality, number of splices, and connectors.

When shorter distances of Single-Mode Fiber (SMF) are used, it might be necessary to insert an inline optical attenuator in the link to avoid overloading the receiver. A 10-dB inline optical attenuator should be inserted between the fiber-optic cable plant and the receiving port on the SFP at each end of the link whenever the fiber-optic cable span loss is less than 8 dB.

The dual-rate 100M/1G 10Km SFP is interoperable with the IEEE 100BASE-LX and 1000BASE-LX/LH standards.

The GLC-GE-DR-LX SFP also supports Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

The GLC-GE-DR-LX SFP can interoperate with other 100M SFPs/interfaces as long as those are based on 100BASE-LX10 standard. A 5dB attenuator is needed on the path of dual-rate SFP Tx and 100BASE-LX10 interface Rx. No attenuator is needed on the other fiber strand.

The GLC-GE-DR-LX SFP can interoperate with other 1G SFPs/interfaces as long as those are based on 1000BASE-LX/LH standard. No attenuator is needed in any fiber strand.

1000BASE-BX10-D and 1000BASE-BX10-U SFP for single-fiber bidirectional applications

The 1000BASE-BX-D and 1000BASE-BX-U SFPs, compatible with the IEEE 802.3ah 1000BASE-BX10-D and 1000BASE-BX10-U standards, operate on a single strand of standard SMF.

A 1000BASE-BX10-D device is always connected to a 1000BASE-BX10-U device with a single strand of standard SMF with an operating transmission range up to 10 km. The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices as depicted in Figure 2: 1000BASE-BX10-D transmits a 1490-nm channel and receives a 1310-nm signal, whereas 1000BASE-BX10-U transmits at a 1310-nm wavelength and receives a 1490-nm signal. As shown, the presence of a Wavelength-Division Multiplexing (WDM) splitter integrated into the SFP to split the 1310-nm and 1490-nm light paths.

Bidirectional transmission of a single strand of SMF

The GLC-BX-D and GLC-BX-U SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

The GLC-BX-D-I and GLC-BX-U-I are the Industrial temperature rated (IND) counterparts of GLC-BX-D and GLC-BX-U SFPS. This allows link operation in harsh environmental conditions where the module case temperature can be in the range.40°C to 85°C.

The 2-channel 1000BASE-BX-D SFP module, also known as Compact SFP, integrates two IEEE 802.3ah 1000BASE-BX10-D interfaces in one SFP module. The GLC-2BX-D or GLC-2BX-D-I is always connected to two 1000BASE-BX10-U interfaces over two single strands of standard SMF with an operating transmission range up to 10km.

GLC-2BX-D or GLC-2BX-D-I is designed to connect to any standard-based Customer Premises Equipment (CPE) in FTTx links (Figure 3).

cisco, compatibility

Compact SFP deployment with Cisco Catalyst 4500

1000BASE-BX40-D and 1000BASE-BX40-U for single-fiber bidirectional applications

The Cisco GLC-BX40-D-I, GLC-BX40-DA-I, and GLC-BX40-U-I SFPs operate on a single strand of standard SMF.

A GLC-BX40-D-I or GLC-BX40-DA-I device connects to a GLC-BX40-U-I device with a single strand of standard SMF with an operating transmission range up to 40 km.

The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. The GLC-BX40-D-I, GLC-BX40-DA-I, and GLC-BX40-U-I SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

1000BASE-BX80-D and 1000BASE-BX80-U for single-fiber bidirectional applications

The Cisco GLC-BX80-D-I and GLC-BX80-U-I SFPs operate on a single strand of standard SMF.

A GLC-BX80-D-I device is always connected to a GLC-BX80-U-I device with a single strand of standard SMF with an operating transmission range up to 80 km.

The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. The GLC-BX80-D-I and GLC-BX80-U-I SFPs also support Digital Optical Monitoring (DOM) functions according to the industry-standard SFF-8472 Multisource Agreement (MSA). This feature gives the end user the ability to monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

1000BASE-X modules for 10G ports

1000BASE-SX SFP for multimode fiber only

The SFP-1G-SX module operates in 10G, 10/25G dual rate and 10/25/50G tri-rate ports of Cisco switches and routers, but provides 1G connectivity. The SFP-1G-SX interoperates with 1000BASE-SX modules.

The SFP-1G-SX module will only operate in 10G capable ports and will not operate in 1G only ports.

1000BASE-LX/LH SFP for singlemode fiber and multimode fiber

THE SFP-1G-LH module operates in 10G, 10/25G dual rate and 10/25/50G tri-rate ports of Cisco switches and routers, but provides 1G connectivity. The SFP-1G-LH interoperates with 1000BASE-LX/LH modules.

The SFP-1G-LH module will only operate in 10G capable ports and will not operate in 1G only ports.

The Cisco 1-Gbps SFPs are supported across a variety of Cisco networking equipment For more details, refer to the document SFP Compatibility Matrix at: https://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.pdf

Table 1. Cisco Platforms

PI Part #: SFP-LX-10K

cisco, compatibility

Out of Stock ; email notification on arrival.

Shipping Information

All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times

Product Highlights

  • Compatible Cisco GLC-LH-SM 1.25G fiber SFP transceiver
  • Transmission Distance: 10km
  • Fiber Connector: LC Duplex
  • Fiber Type: Singlemode fiber
  • Complies with MSA (Multi-Sourcing Agreement) standards

Cisco GLC-LH-SM Compatible 1000BASE-LX 1.25G SFP Transceiver Module 1310nm SMF LC with DOM. 10km

Small form factor pluggable (SFP) transceivers are used in data communication applications where it’s often installed on networking hardware (switches, media converters, etc.) to connect a fiber optic cable. Due to its higher port density, its support of different speeds, and its ability to use various types of fiber cables, the SFP transceiver is often used by OEMs when compared to a standard GBIC (Gigabit Interface Converter). The SFP transceiver is hot-pluggable and compact, making it ideal for use in network applications. SFP transceivers come with various specifications, allowing users to tailor to their specific preference.

The Leapmicro series SFP transceivers from PI Manufacturing are designed for use with Cisco equipment. Equivalent to the Cisco GLC-LH-SM, this transceiver is 100% compatible and fully tested to meet or exceed OEM specifications. Specific OEM configuration data is loaded onto the EEPROM of the transceiver, allowing it to operate identically to the OEM’s transceiver. The transceiver complies with Multi-Source Agreement (MSA) standards.

  • SFP module with Singlemode LC Duplex connector
  • Data Rate: 1.25G
  • Wavelength: 1310nm
  • Cable Type: SMF (Singlemode fiber)
  • Fiber Connector: LC Duplex
  • Maximum Distance: 10km
  • With DDM (Digital Diagnostic Monitoring) / DOM (Digital Optical Monitoring)
  • Hot pluggable if your device supports
  • Application: 1000BASE-LX
  • Compliant with MSA (Multi-Sourcing Agreement) standards
  • Lead free
  • RoHS compliant

Quality and Compliance

Our quality policy is in compliance with various standards. This includes ISO:9001, RoHS, REACH, CE, FCC, and FDA. PI Manufacturing’s quality assurance system ensures that from design, production, receiving / distribution, and deployment that our products deliver. That is the backbone of our company’s fiber products.

At PI Manufacturing, we want to make sure that you’re covered for your purchase. Our Leapmicro series fiber products deliver performance, coupled by reliability that’s backed with our industry standard lifetime warranty.

Please Note: Deploying Leapmicro transceivers does not void the warranty issued by the network equipment manufacturer. All network equipment manufacturers state that installing 3rd party transceivers will not affect the warranty provided on their equipment.

Products that have passed certifications and safety standards

Onshore and offshore manufacturing capabilities

Products ready to ship same day from our Walnut, California facility

Cisco GLC-LH-SMD Compatible 1000Base LX SFP Transceiver Module (1310nm SMF 10km LC DDM)

Quality Assurance

Excellent quality is the foundation of FiberMall’ s survival and development. Our operation team are experts with many years’ experiences in optical communication industry. Our manufacturers are first-class manufacturers in the industry. Many of them have the qualification of OEM for first-class system equipment manufacturers.

Quality Certification

We control the quality of our products, including our strict qualification of manufacturers, quality control process and production technology, and compliance with certification and safety standards. At present, our products meet the industry standards and mainstream quality certification, such as ISO 9001, CE, RoHS, FCC, etc.

our advantages

Fast Delivery

Technical Support

Shopping Satisfactorily

Rigorous Industrial ProductTesting

Optical communication products belong to industrial products,which require high stability and reliability.FIBERMALL adopts leading product design, first-class raw materials and production technology to ensure the first-class quality of our products, so that your project can be used, installed stably and reliably

High and low temperature cycle,aging test to ensure good temperature characteristics

Mechanicalvibration testing to ensure the stability of products

Excellent designand rigorous testing ensuregood EMI performance

MTBF(Mean Time between Failures)testing ensure high stablility

0% 3rd Party Compatible

FiberMall Compatibility Testing Center has most of the mainstream brand switches and devices.Before shipment,We will code the optical modules or DAC/AOC cables,then test them on the corresponding switches to ensure that our products are 100% compatible with your system.

Coding(EEPROM Programming) Testing system

Partial test demonstartion

Cisco N9k-C92160YC-X-C HP ProCurve 5406zl J8697A ARISTA 7-50QX-32 Juniper EX4300 HW S5700-28X-L1-AC Brocade VDX 6720 DELL S4048 ON DATACOM DM4100 H3C LS-5500-28C-S

v Supports up to 10.7Gbps bit rates

v Single 3.3V power supply

v 1310nm FP laser and PIN photo detector, Up to 10km for SMF transmission

v Compliant with SFP MSA and SFF-8472 with duplex LC receptacle

v Real-Time Digital Diagnostic Monitoring

v 1.25Gbps Optical systems

Cisco glc lh smd compatibility

Our price is lower than the manufacturer’s “minimum advertised price.” As a result, we cannot show you the price in catalog or the product page.

You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.

Our price is lower than the manufacturer’s “minimum advertised price.” As a result, we cannot show you the price in catalog or the product page.

You have no obligation to purchase the product once you know the price. You can simply remove the item from your cart.

Cisco GLC-LH-SMD Compatible 1000BASE-LX/LH SFP 1310nm 10km DOM Transceiver Module for MMF/SMF

QSFP Extender Solutions Used for long-distance transmission under 40G QSFP. The QSFP Port could be transferred/converted into 4x SFP port by Direct Attach Copper (DAC) technology under very low insert lose.

Cisco 10GBASE-LR SFP Optical Transceiver Connectivity Solutions What is the simplest cabling solution for connecting two Cisco switches with two 10GBASE-LR SFP optical transceivers?

HiFiber’s Cisco GLC-LH-SMD Compatible 1000BASE-LX/LH1310nm 10km transceiver are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 550m transmission distance with MMF. The fiber optic transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA).

Features

  • Operating Data Rate up to 1.25Gbps
  • 850nm VCESL Laser Transmitter
  • 550-Meter@50/125 μm MMF
  • Single 3.3V Power and TTL Logic Interface
  • Hot-Pluggable SFP Footprint Duplex LC Connector Interface
  • Class 1 FDA and IEC60825-1 Laser Safety Compliant
  • Compliant with SFP MSA Specification
  • Operating Case Temperature Standard:0°C~70°C

Warranty Service

Warranty Service Pack1: All HiFiber’s products share 1-year standard warranty. Warranty Service Pack2: Enhanced Item (Apply to Online order at HiFiber.com)

  • This warranty right only lies in the initial purchaser of HiFiber.com products and is not transferrable.
  • This warranty right do not apply to special-offer products. For special-offer products, we will remark the warranty period under the product.
  • The warranty clause does not include any product damage caused by improper installation, accident hazards, natural disasters, abuse, misuse, low power or over-voltage, incorrect operation, poor/ bad environmental conditions and any unauthorized disassembly, repair or modification.
  • The warranty clause does not apply to products with modified internal electronic information, EEPROM information, etc. Unauth
  • The warranty clause does not include system problems caused by third-party software, upgraded software or upgraded iOS of the connecting devices.
  • The information above is the complete warranty provisions for HiFiber.com products, which is the only effective warranty promise and will replace all written or verbal warranty commitments. Other warranties out of this clause, including decrees in other countries, provinces or locations and any indicative warranty clauses that is nonaggressive, merchantable or suited for some specific purposes, will not be recognized by HiFiber.com.
  • HiFiber.com has not authorized its products to be used in those critical parts that is related to device life, or other applications in which product failure or mal-function may cause injury or death. If HiFiber.com products are used in military equipments, traffic control equipments, disaster prevention systems or medical equipments, HiFiber.com will not assume any liability for any possible casualties or property loss.
  • HiFiber.com warranty responsibility only confines to maintenance, replacement and interest-free refund services. Any voilation of the warranty clause or law will be compensated only by maintenance, replacement or interest-free refund. To the maximum extent of law permission, HiFiber.com will not be held the responsibility to its customers or end users for any damage, expenses, loss of data, loss of income, loss of savings, loss of profits and any unavoidable or indirect damage resulted from the purchase, use or incapable function of HiFiber.com’s product

15-Day money back Guarantee:

15-Day money back guarantee applies to all products sold by HiFiber.com provided that the items are new, undamaged, unmodified and in good resalable condition. If you are not satisfied with the product, you can apply return within 15 days. All freight charges, transaction costs (bank charge or Paypal cost, etc) are the responsibility of the customer.

  • The products are proved to have been abused, misused, replaced, repaired, or modified.
  • After 15 days of delivery, returns are not acceptable. If the items are still under warranty period, customer could ask for repair or replacement.
  • No Return agreement was reached with a HiFiber.com sales representative before Returns.
  • Return process is not done based on HiFiber.com Return instructions.

About Us

HiFiber.com is a leading supplier of fiber connectivity network solutions for Data Center and HPC. The main products include compatible module, direct-attach cable(DAC), active optical cable(AOC), Jump Cable, CWDM/DWDM system, network integrated card(NIC), etc. HiFiber.com is with the goal of providing quality guaranteed and cost effective products for customers all around the world.

HiFiber.com features a huge inventory of over US 1.0 million buffer stock that ready to shipped out in the same day of customers’ purchase(in most cases) with no minimum orders or restocking fees.

What makes HiFiber.com completely different is the lifetime technical support. That’s right, call anytime during business hours and get the help you need whether you made your purchase last week, last month, or last year! Our products are compliant with CE, RoHS, FCC, ISO9001, ISO14001 etc. and all products are environmentally friendly.

Author

Goltilar

| Denial of responsibility | Contacts |RSS