Home Electric stoves / gas stoves Burner from the gas stove with their own hands
Electric stoves / gas stoves

Burner from the gas stove with their own hands

How to make a gas burner: 4 assembly options and step-by-step instructions

Owners who have a workshop, and often work with metal in it, need special equipment to solder, weld, heat and join, as well as reshape parts. Any of these operations is not without a gas burner, a convenient, simple and reliable device. Of course, such a tool can always be purchased in the store, but many owners choose a different way. the self-made device, which in this case will cost much cheaper. If an amateur craftsman is not used to looking for easy ways, he can learn how to make a gas burner, find materials, and then assemble a relatively simple tool, spending a minimum of time to make it.

The main attractive “features” of this device. ease of use, absence of unpleasant odors, soot. Its compact size is another plus: the gas burner can be used anywhere. The usual design consists of several mandatory elements. These include:

The gas burner is called a propane burner, but it can also run on a mixture of butane and propane. Gas is fed from the cylinder through a hose. Adjust the gas flow regulated by the tap on it, but it is better to protect yourself as much as possible, so it is recommended to install a pressure reducer. Isolates or blocks the gas supply by means of the shutoff cock located behind the main valve. The flame intensity is regulated by the working tap.

The gas hose through which the fuel is fed is connected to the nozzle, and there is a nipple at the end of it. Both elements are placed in a metal cup: it is there that the process of creating a combustible mixture. the enrichment of combustible gas with oxygen. It then enters the combustion area through a nozzle. To ensure the continuity of the combustion process, it is provided with holes.

How to make a gas burner yourself?

There are several options for making the necessary device. The first method will allow you to get what you want after an hour (or more). The remaining options do not belong to the elementary ways, so they will require a little more time and effort.

Assembling a burner from a pipe

This is the easiest answer to the question of how to make a gas burner, but caution is still necessary, because the master will have to work with an explosive substance. The slightest mistake can cause serious trouble.

This tool is simple, but it will allow you to engage in the heating of parts before welding, preparing parts for forging. With the help of a simple device you can even repair the roof of asphalt.

Materials, tools

To make a gas burner, you will need to prepare a small set of materials and tools. It includes:

  • Two sections of pipes of different diameters;
  • A grinding machine (file);
  • Heat-resistant paint;
  • metal rod;
  • welding machine;
  • A cylinder of propane;
  • drill and drill bits;
  • gas hose;
  • angle grinder;
  • reducer;
  • nipple;
  • vise.

Once everything is assembled in one place, you can begin to create the equipment. But first you need to find a suitable model. As a rule, it is relatively easy to find on the Internet already tried and, therefore, quite reliable samples to imitate. In this case, it is not recommended to change the dimensions of the parts, trying in any way to adapt the drawing “to yourself”. The reason is still the same. danger of gas.

Equipment assembly

The work is carried out in this sequence:

  • First, from a pipe with a diameter of 40 mm with an angle grinder cut off a piece of the required length.
  • It is brought to a proper look, using a grinder for the outer edge and a file for the inner edge.
  • Then we deal with the pipe of a smaller diameter. It is cut, processed, then using welding equipment attach a fitting to it.
  • The opposite end of this pipe is closed. welded tightly, then this part is grinded and a hole is drilled in it. Its diameter is 0.9mm.
  • Assemble both elements. To avoid alterations, first they are connected by three metal rods to check the operation of the equipment.
  • They connect the “semi-finished product” to the gas cylinder to test its performance. If no problems are found, proceed to assembly.
  • Metal rods are removed, and the workpieces are welded back into a single structure. Lastly, the gas burner is painted.

The finished tool is connected to a propane bottle. Since gas is always a danger, it is strongly recommended to connect the tool using a reducer.

Creation of a miniature burner

This device is called a Bunsen burner, and it is a laboratory device designed for heating over an open flame. This is a vertical tube, mounted on a stand, to which a metal tube is welded. This is where the gas supply comes in. The advantage of this device is its safety for the craftsman: the torch can be held in the hands without fear of burns.

Equipment made of copper tubes

Of course, a homemade device will differ from the original, but it will not affect the efficiency.

What you will need for the job?

How to Make a Gas Bunsen Burner? First you need to find everything you need. In this case, the work kit has fewer parts. To assemble the tool will be required:

  • pliers;
  • A piece of thick plywood;
  • Diamond file, file;
  • soldering iron, orthophosphoric acid;
  • copper thin tubes of different diameters;
  • A gas torch that has already served its useful life;
  • copper wire, a thick syringe needle and an M8 bolt.

Having prepared this minimum set, proceed to the main work.

Making a Bunsen burner

In this case, first deal with the manufacture of the first element. a thin tube, the ideal candidate for which would be a piece of 100 mm long, with a diameter of 8 mm.

  • The cut piece is cleaned of jagged edges on both sides. Then a piece of 40 mm length is cut from the tube of smaller diameter.
  • Create the mini nozzle of the gas burner. To do this, take a syringe needle, file it with a triangular diamond file, and then break it.
  • Then the edges are deburred with the same tool or a file. To open/clear the channel, use a thin wire.
  • Connect the smaller part, the needle and the copper wire. The end of the first billet is squeezed with pliers so that the needle can be fixed there.
  • Then its end is treated with orthophosphoric acid, a copper wire is soldered to the side, and then a gap in the tube is soldered.
  • Flush the solder joints with water to prevent oxidation. Then they solder the element with a wire in a tube of a larger diameter.
  • At the beginning of the larger part (opposite the wire and needle) a hole is made for the adjusting bolt (M8). It is screwed in, then check the work.

For the convenience of using the tool, it is installed on a homemade tripod, made from a small piece of plywood. For this, two wire loops are made in the lower part of the burner. A hole is drilled in the edge of the tripod, a piece of wire is inserted into it, on which the connecting elements of the tool are put. The last stage of the operation is to check the performance of the gas burner, the final adjustment of its flame.

The design of gas burners

There are two types of such products:

Such devices work by absorbing air and at the same time have a simple design.

Nozzles do not need automation and various additional devices, it is enough to ensure good air circulation in the room where the stove is.

The design of such a device may also include detectors to measure the level of oxygen to prevent dangerous situations that are caused by its low m.

It is believed that atmospheric devices have a relatively low power, but it is quite enough for heating medium-sized rooms. And also we can note the simple design of such units, their quietness and compactness.

  • On the other hand, the superchargers, or blowing devices, have a more complicated design. The basis of operation of such devices is a forced air supply into the furnace chamber to form a mixture, on the basis of which the stove works. Due to this mechanism, the correct proportions in the mixture are achieved.

The gas blast burner provides a forced air supply to the oven chamber where the mixture is formed for operation.

The devices are safe, since the processes take place in an enclosed space. And they also have high efficiency rates and are more environmentally friendly devices than atmospheric burners.

Reference! If we are talking about atmospheric units, the boilers will be with open combustion chambers. In the blowing boilers have closed chambers.

How to choose a good device?

The main characteristics of such products are:

When selecting an appliance, the following factors must be kept in mind

  • Simplicity of design. The cross-sections of the paths for the gas flow should be the same and create minimal resistance to the gas.
  • The size of the room. For small rooms an atmospheric device will be enough, but for larger rooms the power of such devices may not be enough.
  • The manufacturer of the product. Domestic and foreign (mostly on the market are products made in Germany) units have about the same cost, but some such devices are designed for installation in specific types of stoves. For example, the domestic product AGG-15 is suitable for use only in stoves with a long channel for the fuel mixture.

Gas nozzle AGG-26, suitable for stoves with a long channel.

Important! It is necessary to know where the fuel will come from to the heating device: from individual cylinders or from the main pipe. This is also taken into account when installing the stove.

Types and classifications

According to the purpose of the devices are divided into professional and domestic.

  • Burners for work connected with metal working: for soldering, forging, welding.
  • Devices for general construction, road works, roofing, wood burning, cleaning of old paint.
  • Process equipment for various purposes. For example, drying chambers, food industry tools.

From domestic is a gas stove, nozzles home furnaces, heating boilers, gas convectors.

Domestic can include devices of the home workshop. It is here most often there are burners by their own hands, not only made, but originally designed to perform specific tasks.

In the first type, the air (or oxygen) is captured by the supplied stream of gas. In the second, the gas-air mixture is obtained in the pre-chamber.

What is needed to make?

Tools first. Although, for the most part, the assembly is made of prefabricated elements, a set of drill bits and taps are needed:

  • Metal saw.
  • Drill with a set of drill bits.
  • Pliers, screwdriver, files personal, velvet or suitable file.
  • A set of dies and taps with holders.
  • Locksmith’s vice.
  • Rubber or silicone hose to connect the device to a gas bottle.
  • Two gas valves: the main one, which opens the gas supply, and the control valve, used to change the amount of gas supplied to the combustion zone.
  • The tube with a thin hole at the outlet. the nozzle.

Often, the gas valve is called a nipple, which is wrong and contrary to the principle of the device. Nipple. a threaded tube, often with a built-in valve. To connect the parts. Nipple ensures the injection of the right amount of fuel into the mixing chamber (for example. carburetor nozzle).

The exact list will be determined by working out the detailed drawings of a homemade gas burner, based on the blanks available.

Every gas has its own particularities. Acetylene, propane, and its mixture with butane are most convenient for household and homemade systems.

Hydrogen cylinder is difficult to obtain, methane has a higher pressure than household gas, it requires a reducer.

Work safety

The main damaging factor when using and adjusting the burner is the temperature.

Even the household gas is also dangerous, as proved by the accidents, connected with explosions or poisoning.

The power of propane burner depends on the diameter of the injector and nozzle. It must be remembered: it is not the gas itself that burns, but its mixture with air (oxygen).

The larger the volume that reacts, the stronger the plume. There is an increased danger of getting a dangerous proportion of propane with air in the injection chamber, and as a consequence of a small explosion. a clap.

Therefore, a homemade burner is not necessary too big. As a rule, the diameter of the injector does not exceed 3-5 cm, and the opening of the nozzle 0.5 mm.

Work in a ventilated room or outdoors. Use gloves to protect your hands.

What to do?

Before we start making, let’s choose a suitable type of burner from the following list:

The second and third type are more difficult for making. And to organize blowing you need compressed air or oxygen, which means a compressor or another cylinder.

DIY | How To Make Gas Stove

The easiest way to perform independently will be the first type, it is worth to prefer.

Control the process of the atmospheric burner by means of the control valve. Therefore, the choice of type, as well as the model of the device itself depends largely on which one comes up.

Remember that the combustion of a particular gas depends on the diameter of the nozzle opening. The hydrogen jet has a little less, propane. more.

Designs, diagrams, drawings, assembly technology

First you need a drawing of the future device, a sketch or diagram of the burner, with dimensions.

It is easy to find one on the internet. If you have an idea of the general principles of the device, owns the methodology of its calculation, you can develop a project on your own.

As a simple variant. to use a valve from a propane or oxygen cylinder, known as model BK-74 (see: VK-74). diagram).

To the side threads milled fitting, which at the same time will serve as a handle. You can use a pipe of a suitable size. On one side of it shall be threaded internally and on the other side a shank shall be made for attaching a gas hose.

On the thread, by which it is attached to cylinder, screw cap. Drill a hole in its end and cut the thread for the nozzle. To the plug on the steel spokes we weld a nozzle that will serve as an injector chamber at the same time.

It is even easier if you have an old acetylene torch or a benzor cutter. In essence, it is a ready-made burner. It is enough to remove the parts related to the oxygen supply so that they do not interfere, replace the gas nozzle with a nozzle, fix the injector-chamber-nozzle above it.

A very tiny gas burner can be made from a basketball inflation fitting, a syringe needle, and a couple of droppers, or as they are called medical “systems” for administering medicine by drip. Even a lighter can make this home-made device work.

Adjusting roller clips will act as valves.

True, to this device we need a forced air supply, for injection of atmospheric air the diameter of the nozzle is too small. To this end, you can use the aquarium compressor or an old refrigerator.

Carefully grind the point of the syringe needle and the nozzle. After that, the needle of the syringe is slightly bent insert into the side hole nozzle so that the end is slightly out of the cut tip.

The place of insertion of a needle we wrap a copper wire, well soldered with acid.

The burner is ready. It remains to connect the gas and air to it.

How to pick up correctly?

Selection of the gas burner depends on many factors. The main features to pay attention to are the geometric dimensions of the equipment. It is necessary that it can be easily inserted into the desired furnace. The clearances from the walls must also be left in the order of 10-50 mm, depending on the type of device.

Since gas burners allow the continuous adjustment of their power by changing the gas flow rate, this question is not so crucial in the choice. The main thing to clarify from the supplier what regulation range is offered on this equipment and which flame distribution device is used.

Special attention should be paid to the quality of the seams and holes in the burner. If possible, ask the seller to demonstrate the operation of the product as a whole to make sure of the uniformity of the flame distribution, the possibility of adjustment and the reliability of the design.

It is also necessary to have a certificate for the gas-using equipment. Without it you will not be able to legally use the stove. Since the first check by the fire and sanitary inspection will reveal the absence of such documentation. And will prohibit the use of uncertified equipment for cooking.

Some peculiarities of the operation of stoves of different brands

Before buying a gas stove with the logo “Gefest” it is worth finding out how its oven works, what functions and safety systems are equipped with the equipment. It is necessary to check whether its technical parameters and settings correspond to the type and pressure of gaseous fuel in the network.

Installation and connection of the device is carried out by an employee of the gas utility, which has a contract for the supply of blue fuel and maintenance of equipment. He must subsequently fill out an installation slip indicating the nature of changes to the settings, if any.

Warranty maintenance of gas stoves and household ovens of “Gefest” brand is carried out by a service technician. Subsequent repairs or tune-ups can be performed by professionals who are qualified to repair gas appliances

Using a gas stove in an apartment or country house requires the owner to strictly comply with safety rules.

We suggest reading What is better: stove or hob and oven?

It is allowed to operate a gas oven if:

  • the stove is installed in a fire-safe place, grounding is carried out;
  • The gas stove, and in particular the oven, is in good condition and all components are undamaged;
  • The tray and griddle are not overloaded. the permissible weight is up to 6 kg;
  • The door of the oven must be closed when it is in operation.

Use the device only for its intended purpose. heating the room, drying flammable objects are not allowed. If you smell gas, first of all shut off the common valve of fuel supply pipe, and then all the valves of burners. An emergency service should be called in to repair the leak.

There are three basic systems for controlling stoves:

The principle of mechanical and combined control is described above.

How to turn on the oven in an oven with electronic programmer, using the Gorenje brand as an example:

  • You set the time by simultaneously pressing buttons 2 and 3, then and.
  • Press “A” on the programmer with an analogue display to select the function.
  • Press twice to confirm your choice.

The Gefest gas stove is equipped with a knob that adjusts the power on at the top and bottom. Turn and select mode.

Press and hold down the thermocouple button for a few seconds and simultaneously press the ignition button with the other hand (a spark or a light is displayed next to it). If the ignition switch is not provided, use a match.

To use the electric oven of an ARDO:

  • Select the desired mode with a button or control knob.
  • Light with a match or with an electrical pilot light.
  • Do not close the door for a couple of minutes.
  • Preheat the oven for 15 minutes.

Bosch stove is equipped with a timer knob, temperature, top and bottom heating. There are models with electric ignition and without it. Set the temperature, select the heat, put the dish in the preheated oven and set the timer.

To turn on the oven Greta turn and press the knob, keeping in this position for 15 seconds, then release. If necessary, after no earlier than 1 minute, repeat the procedure with the oven door open.

How to connect a gas stove with your own hands: step-by-step instructions, installation rules

Indesit models with piezo ignition, simply turn the knob to the maximum temperature and press. On manual-ignition models, the knob must be kept pressed for 15 seconds or the oven will not light.

Be sure to read the instructions and safety precautions.

  • Do not store cleaning agents, detergents and any other chemicals inside the equipment because of the risk of fire.
  • Do not allow children to play with the appliance.
  • Use special dishes for cooking.
  • Use tack guns: the equipment gets very hot.
  • If you can smell gas and emit smoke. turn off the oven.
  • Do not leave the oven unattended when it is running.
  • Once the cooking process is complete, turn off the stove and remove the dish using oven mitts.

Option. a stove for villas

Few people can boast of having a centralized gas supply in the cottage, and this makes it many times harder to cook food or boil water for tea.

But if you have skills in working with gas-welding equipment, then it will not be difficult to make a homemade gas stove for a summer house.

To build a homemade stove, you will need to prepare:

The first thing to do is to build the body of the future stove. You will need to cut the metal corner into 8 pieces, their size will depend on the desired height of the stove. We also recommend to read the rules of welding works.

Next, the body of the future stove is built by gas welding, and a gas burner from an old water heater is welded to it.

Such a stove will be an excellent alternative to the factory version. It can be put in any convenient place, both in the house and outdoors

Next you need to install the hose and the shutoff valve. To do this, use an adapter to connect the gas burner to the shutoff valve, and then, using a flexible gas line, connect the stove to the gas cylinder. At this stage it is very important to take care of tightness of all connections.

Now the stove is assembled, and you can start testing it, pre-checking the tightness of connections. The easiest way is to lubricate all the joints with soap foam, if there are bubbles, the connection is not tight and you can not use the equipment. If everything is in order, you can start using the stove.

If there are no corners in the household, then you can use round metal pipes of small diameter for the construction of the tile base. For stability, they can be welded to the bottom of an old automobile disc.

Be sure to remember that at the end of using the equipment, you must necessarily shut off the gas, both on the device itself, and in the cylinder.

Option. a stove from a tin can

Many travelers have probably heard of and used such a device as a camping gas stove.

It is a lightweight portable burner with legs, and runs on a gas bottle. You can buy them at any store that sells travel aids.

Camping gas stove will be a real salvation in the rain when it is not possible to make a fire from wood. A small gas cylinder may be enough for a family weekend in nature

The only disadvantage of camping stoves is their cost. Therefore, we suggest assembling a camping gas stove from improvised materials with our own hands, especially since it can be made by any handyman at home.

For this we need to take a can of condensed milk and make four holes in it with an awl on one side, evenly spaced around the edges, and on the other side. one in the middle. We turn the jar over the container and wait for the condensed milk to flow out

In the next step we enlarge the hole in the bottom of the jar with a 0 drill bit and wash it. The copper tube will be inserted into this hole

To bend a piece of copper tube without deforming it, clamp it on one side with pliers, and on the other. fill it with sand, firmly tamping it and clamping the second hole with pliers. After that you can safely bend the tube without fear of deforming it. After bending, cut off the bent edges and pour out the sand

You will need to take a needle from a medical syringe and cut it, leaving 4-5 mm to the base. The edge after cutting can be filed

Using a drill we make three holes in a copper tube and slip our nozzle into the tube, putting a silicone tube on it beforehand, which will serve as a sealer

To prevent the tube from wobbling, you need to reinforce it. To do this, you need to cut a piece of aluminum strip of the required length, drill a hole in it for the tube and rivets. Thread the tube through the hole you made and fasten it to the can with rivets

For the legs you’ll need to cut three more pieces of aluminum strips of 37 cm, give them the necessary shape and using rivets to attach them to the bank. To make the shape of the legs as uniform as possible, it is better not to bend them one by one, but all together. At the top of the structure, around the circle, pierce with an awl 16 holes, trying to keep the maximum distance between them

Connect the gas bottle to our homemade device and turn it on. If everything is satisfactory, you can leave it like that. If you need a more powerful flame, you can increase the number of holes in our improvised burner

Types of burners

According to their design, functional differences burner devices are divided:

  • single-stage. able to work on/off;
  • two-stage (as a variant. models with smooth modulation). work at full power, when the desired temperature is reached, the flame is reduced by half;
  • modulated. boilers with modulated burner are characterized by smooth regulation of the flame intensity.
  • injection/atmospheric. Operate with air supply from the room. Installed in open combustion chambers respectively. Used also for older boiler models.
  • fan/supercharged. Operate in insulated combustion chambers. Combustion air is supplied by a fan. According to their design features they are divided into:. vortex (nozzle orifices round shape). direct-flow (narrow slit round/rectangular shape).
  • diffuse-penetrating. Air comes in two at the same time: one is mixed with gas fuel, the second is added directly in the chamber during combustion.

Principle of operation and differences of gas equipment

You can not objectively judge the quality of the purchased nozzle. Do not disassemble the finished product in search of possible defects. So there is a chance of damaging rather than checking an inexpensive device.

Assembling each element of the burner yourself, you will not only get a pleasant satisfaction from the work done, but also to save money. In this way, operating and repairing the gas appliances in the sauna becomes a safe and consciously.

A gas heating unit is a housing of a sauna stove with a gas supply device placed in it. Here are the main elements of the control mechanism, by means of which the fuel supply is regulated.

Burner heats the air in the furnace. The heat energy of the nozzle is transferred to the stone tray via the nozzle body

Particular attention in a heating furnace with a gas nozzle requires a chimney, which should be periodically cleaned.

The advantages of heating water and bath stone with a gas burner include:

  • Ease of operation. For heating it is enough to turn the valve and ignite the gas in the burner. The sauna room will be sufficiently heated in an hour.
  • Eco-friendliness. During the operation of the gas device, harmful emissions from the combustion of gas have the lowest volume compared to other fuels.
  • Easy maintenance of the burner and the stove itself. No need to fight soot on the walls and remove waste, as with coal or wood.

The oven can be equipped with special sensors that activate when the extraction rate is critically low. In this case, the gas supply is automatically cut off.

Inexpensive fuel of a gas-fired stove allows you to not limit the number of bathing procedures. Even with the daily heating of the sauna, it becomes quite easy to maintain cleanliness

Such a disadvantage of a homemade burner, as additional registration of permits technical documents, pays off at the expense of high performance. Using a gas nozzle will save 30% of the cost compared to solid fuels. Heating the bath with gas is twice cheaper than using an electric boiler.

Features of homemade construction

The main task that the future homemade device will perform is to heat a room, tent, garage and other rooms. In self-assembly, the appearance of the device and its decorative qualities are of secondary importance.

And an important role will be played by the sufficiency of the amount of heat released, the safety of operation and ease of transportation of the device.

Lightweight, portable and easy-to-use designs, made from gas burners do a good job heating small rooms

A variety of homemade gas structures are used for heating purposes. It is easy to make heaters from gas burners or gas stoves with your own hands. For a quick assembly will need a pre-prepared scheme, the material from which the heater will be made, and a variety of tools.

Often a homemade gas heater is taken in a camping trip out of town or on a fishing trip, on a variety of gatherings as source of additional heat. In such cases, it will be enough to assemble the device, check its performance, inspect it for leaks and proceed directly to heating.

Sometimes the homemade heater is planned to use as an alternative source of heating. For example, at the cottage, in the barn, in the paddock, in the garage and in other rooms in order to save money on utility bills and the purchase of gas appliances.

Often the prototype for making a mobile gas heater is a factory-made gas infrared burner and stove

In such cases, it is necessary to take care about the maximum reduction of heat loss within the heated room. This is done by insulating the exterior and interior walls, floor and ceiling of the structure. It is most effective to carry out procedures at the same time internal and external insulation. Then the heat will be kept as long as possible and gas consumption is much lower.

If it is not possible to conduct two types of insulation at the same time, it is necessary to insulate the building at least from the inside. It is more efficient. In carrying out the procedure it is necessary to use a suitable material for thermal insulation, as well as fireproof materials and coatings.

Thermal insulation of heated premises significantly reduces heat loss. In such premises, the heater will not work in vain, and therefore the user will not spend extra money to buy gas

When using gas equipment it is always necessary to follow safety rules and adhere to the rules of installation of equipment and insulation of premises. If the heated building is finished with fire resistant materials, it will be fire resistant. It significantly reduces the risk of fire and unforeseen fires.

It is better to place the self-made gas heater in the center of the heated room. In this case, the heat released is not lost or absorbed by the walls, as there is no contact with them. The warm air will escape upwards towards the ceiling of the room. If you also install special reflectors on the ceilings, then the effect of a heat cap will be created in the room.

This positive phenomenon allows significant savings on space heating with homemade gas structures. Warm air circulates throughout the space and does not leave it. It is worth knowing that the heat cap effect is created when the heater emits a sufficiently intense airflow.

The main quality that the device, made by hand, should have is the safety of operation. If the heater leaks, immediately turn off the gas supply

Homemade heater according to the results of the assembly should have the following parameters:

  • safe and uncomplicated operation;
  • economical consumption of energy resources, in this case gas;
  • efficient and fast heating of the premises;
  • quick start-up of the device, the possibility of long-term operation;
  • simplicity of assembly and ease of replacement of parts that have failed;
  • the possibility of transporting the device;
  • dimensions convenient for carrying, transportation and operation.

All of the above characteristics are quite difficult to fit into a single design. However, some craftsmen manage to improvise a gas heater of sufficient power, convenient, easy to use, which serves the user for a long time.

The advantages of homemade gas heaters include:

  • Economical operation. Sometimes one full cylinder can be enough for 12 hours of continuous operation of the device. Of course, this all depends on the size of the cylinder.
  • Can be quickly turned on and off.
  • Compact and light weight. Some homemade structures are convenient to take on hikes. They do not take up much space and weigh several kilos. And the useful effect of their use is difficult to underestimate.

Among the disadvantages of self-made structures include the need to find a suitable cylinder or adapter. That is why it is necessary to take care of buying additional cylinders in advance. Or be able to pour gas from a large cylinder into a small tank.

The heat exchanger is an important structural part of the heater. It represents a steel box with a welded pipe that goes through it. The heat exchanger is installed in a metal case. Also a fan is installed

Construction of a gas heater

All constructions are united by a single gas supply system. As source of fuel are gas cylinders with propane-butane or other types of gas mixtures. Also for small heaters, gas cans for burners are used. They can be carefully refueled and overfilled with their own hands. The main thing is to comply with safety regulations.

Many homemade gas heaters work on the principle of infrared radiation. It consists in the fact that the fuel gradually burns in the burner and thus heats the heating element, which, in turn, emits heat in the infrared range. This heats all the objects of the room or the tent. The heat is then released into the air.

Gas heaters, made by their own hands, are quite varied and can have different weight from half a kilogram to a dozen kilograms. It depends on the complexity of the construction and the required output heat level.

Many owners wonder about finding a more budget-friendly alternative to traditional heating. Self-made plants are the perfect solution to the problem

Usually constructed homemade their main elements:

  • Fans, which evenly distribute the heated air in the room;
  • Power regulator, which allows you to adjust the level of heat released and the temperature in the room;
  • The gas burner, which directly burns the gas and heats the system;
  • Heat emitter. an element that accumulates thermal energy and releases it into the air or onto the objects in the room;
  • Grilles that protect the heat emitter from direct contact with objects.

In addition to the basic elements, additional elements will be required, which may include handles, grills, reflectors, covers, mountings, gas hoses, and other blanks.

The device made in this way is suitable for heating small and medium-sized rooms, and small rooms. In this case there is no need for electrical appliances and electricity. When the next cylinder is used up, you can refill it or buy a new one.

The main advantage of self-made construction is the ability to use inexpensive and accessible components. over, the assembly is characterized by consistency and simplicity

Some homemade gas-fired infrared heaters also have additional functions which include heating water, drying clothes and various items. With some devices it is also possible to cook food. At night such a heater is lit and is source of additional lighting.

Makeshift gas burner for cauldron and wok. Part 1.

I made this one about five years ago. And, honestly, it was one of the most successful products in my life (except for children, of course)).I’ll tell you more (spreading my fingers), there are not so many of such home-built burners on the Internet.Readymade burners are on sale, Wolmex, for example. But that’s not what this community is about.I will publish here too, if you follow the instructions more or less, it is easy to repeat.I use it regularly, mostly in the warmer months.

Here we go. You need to buy such a product. called the transition. An inch on one side and an inch on the other:

Reminds me of a rocket nozzle. Well, it’s almost a rocket, just the other way around:

Large washer, also the outer diameter of 90, and inside the larger diameter of the transition I turned the turner:

A piece of plumbing pipe at 90, length 25 mm:

A piece of water pipe an inch, 180 mm long:

A stainless steel fitting assembly. coupling, lock nut and a tube with a half-inch thread. You can also from rust. but the threads will start to rust ):

The most complicated part is the dissector. Pancake turned the turner, diameter 90, height 16 mm. I’ll tell you why it’s so thick later. Holes drilled on the drill press myself.A good German drill bit for 3.5 mm, oiling, an hour and a half of work.Strong steel is not necessary, St3 will do, at least all iron:

How to mark. here’s a photo of a grid from an industrial meat grinder, you can scale, print, glue and nail the centers of the holes:

I also bought a ready-made ring at the supermarket, in the forged goods department:

And then what. weld the burner body. That’s one ugly, ugly thing:

We welded a swivel on the long side of the thread, corrected the threads:

It’s better to screw the die onto the fitting right away, weld it, and then correct it.Drill a hole in the middle, cut M6 threads. Screw a semiautomatic burner lug for 0.8 mm wire on the FUM tape.8 mm. This will be the nozzle. Sold in welding equipment stores.Cut ring and weld burner body and tap assembly together.Screw on the socket and lock nut beforehand. The washer between them was planned as a flame-reflector when the burner pops, but it is not really needed:

Why do we need a sleeve. it works as a damper and regulates air flow.

A commercially available product is a fine adjustment needle valve.It allows you to smoothly regulate the height of the flame and gas flow rate.Also screwed through a half-inch thread adapter and socket on FUM tape:

Paint what you need thermal paint, and what you do not need. for this painter’s tape:

After a half hour in the oven above 200 degrees turned out a beautiful pie:

You need a medium pressure propane reducer to operate the burner. This welding equipment, too.The usual frog is unlikely to work, the nozzle needs to be different, and in general the wrong compote.Most factory high-pressure burners, the same Wolmeches, also require such a reducer:

Connect to the cylinder through the reducer. and “Here we go!”. Short vidosics, not 40 minutes each: how sawed, how cleaned. Don’t be lazy, take a look:

Do your research, and don’t ask too many questions yet, like:

In part two, I’ll tell you what this was all about, how to use it safely, how to save gas, what I do with this device, and many nuances.

Owners Комментарии и мнения владельцев and opinions 34

The main “chip” of the field/hiking kitchen is the subtle, barely perceptible smell of smoke, which is absorbed into the finished dish. Cooking outside with gas is not the same.

A subtle, barely perceptible smell of carcinogens ).

That’s a myth. Some people put a burning log in their fish soup and a shot of vodka in a cauldron and the alcohol dissipates instantly.).

For shashlik on an open fire. yes, it soaks in the smell of smoke and burning fat. Are you going to eat kebab every day for a week in a row? It’ll turn your stomach. And there are autotourists who have a field kitchen and one grill and nothing else.

And for dishes in a cauldron, it doesn’t really matter. I hate standing at the brazier and smelling like smoked lard. Just like cooking on a stove with no chimney. When you’re cooking every day somewhere in the countryside you stink, your eyes hurt, your face is red).

I will not argue, to each his own. However, the same pilaf cooked at home on a gas stove, and cooked on an outdoor stove, tastes different. Cookware is the same (cauldron), composition, quantity of ingredients and even their manufacturers are identical. And the taste is different. With fish soup (without logs and vodka), with meat (not kebab, but on a frying pan), with tea. the same picture.

I’m not arguing, I’m having a conversation.).I almost never cook on the stove at home. the kitchen is for women.

Try to fry meat and onions for pilaf at home.And a couple of kilos at once. This isn’t going to work.The wood-burning stove heats more evenly and has more heat.That’s the result.

It tastes even better outside, in good company, for some reason.

Harmfulness is also relative, everything is harmful in moderation.I don’t buy fries at McDonald’s, but outdoors in a cauldron is sometimes pretty good.

In the evening, I hope to finish the second part, which is closer to a yum, come on in.

I’m not going to argue, to each his own. However, the same pilaf cooked at home on a gas stove and cooked on an outdoor oven has a different taste. Same cookware (cauldron), composition, quantity of ingredients and even their manufacturers are identical. It tastes different. With fish soup (without logs and vodka), with meat (not kebab, but on a pan), with tea. the same picture.

The pilaf cooks on the stove for an hour and a half, and on the fire for 2.5-3 hours. And if you leave it in the Russian oven overnight, it will taste fantastic.

A faucet with a nozzle from such a burner won’t do:

I drilled holes 2mm, plate 4mm. Here’s a shot from the video

What’s the faucet, where did it come from?? Can I get a link?? I’ve made three different burners with ball valves. It’s horrible, unrealistic to adjust

Chinese, medium quality. Turkish ones are better.Here’s the construction of the faucet. They come in straight, angular, with fittings and without, in our markets sell a lot of different configurations and adapters to them, too.I found a similar one on Ali:

Well, I know how it works. It’s just a question of reliability. I found for example a ball valve with a small cross section, it was a bit easier to adjust the flame. And then it started to leak on the axis. There probably the gas began to eat the rubber rings. So it is like this

In principle, the faucet is quite reliable. There is no plastic in the shutoff part, only two O-rings under the nut on the stem, they are easy to replace. For five years of operation nothing happened, only cleaned and lubricated. Replaced the valve recently only because of its mechanical failure (unsuccessfully dropped the burner and stupid it broke).

I know how it works. The question remains about reliability. I found for example a ball valve with small cross section, it is a bit easier to regulate the flame. And then it started to blow on the axle. The gas must have started to eat away at the rubber rings. So that’s it

It’s Time To Break Up With Our Gas Stoves | Climate Town

The faucet will fit from an old blowtorch.

I made this for the cauldron. The burner is Italian from AOGV, nozzles mouthed and unfolded caliber.

Have you tried a different hole pattern on the diffuser?? A pity it is better not to make a removable diffuser in this assembly, if only the head with the diffuser threaded to the tube, so you can at least have a couple of different diffusers. Made it great!

We love cauldron food, but we’re tired of collecting wood. Sawed up a stove from wheel rims and was looking to make a burner, but a neighbor was carrying a stove for scrap and I expropriated from him a burner from the oven. I’ll just add a regulator and it should be fine.

What’s the point of reinventing the wheel??Here’s an example, for all tastes, sizes and wallets:

I can’t believe where I’m going. The community is called “DIY”.And you’re asking the question, “What’s the point??”. What’s the point of making something yourself if you have the purse??Killed you with your question.

The point is rationality.When the material cost of labor comes out much less than the finished product, for the same quality/functionality.☝️

Author

Laidred

| Denial of responsibility | Contacts |RSS