Bosch oven how to remove glass

How to remove glass from the oven of the Hans

After that, carefully consider the places where the loops are located. It is there that the mounts are located. On both hinges, you can notice small levers that rise and move towards themselves. To remove the door of the oven, it must be directed up and pull in the horizontal direction, after which it is easily disconnected from the case. At the same time, it is worth considering its severity so as not to break the glass or harm yourself. After removal, the door must be put on a soft surface so that there are no scratches or damage left on it.

The loops are removed in the same way as when removing the door. But you will have to unscrew several additional mounts. During execution, the structure will be divided into several parts. There are loops in one of them.

The oven can open poorly or close for the following reasons:

For ovens of the Bosch brand, the spring is placed on both sides.

In order not to break the loops when cleaning the doors, the following rules must be followed:

• You need to unscrew and remove the loops slowly, because if you do not calculate the strength, the details may break.
• Before removing the loops, make sure all the screws were twisted. If there is only one, the fastenings can bend, and then you will have to change them.
• Do not use force when separating doors or glass. Companies make ovens so that all its details can be removed without problems. If you feel resistance, most likely you are doing something wrong.

Why it might need to remove the door?

You can replace yourself. Buy glass should be in special stores.

Necessary tools for repair work

For repair, you need quite a few tools: a cross screwdriver and glue-mix. Mittens are also needed, so as not to injure hands when replacing a cracked or bursting glass sheet.

A sealant is needed with good bondness, high heat resistance, elasticity and lack of toxicity.

Ordinary sealant or sealant for stoves and fireplaces in this case will not work. You need to find a special glue for the repair of kitchen equipment. For example, Downing Q3–1566.

For repair, you will also need a new workpiece. We will tell you more about this, because not everything is suitable for the oven. It should be heat.resistant and fat enough. Each oven model has its sizes, configuration, so the material may be figured or have cutouts. Then you have to order a “native” part from the manufacturer, which will be not cheap, or make to order in a specialized company.

When ordering, you need to bring the master an accurate sketch. Processing parameters are measured with a ruler and a caliper. If only fragments remain, you will still have to contact the manufacturer.

The price of hardened curly glass is about 2 thousand.

The term of the order will be about a week, which is much faster than contacting the manufacturer’s service center of kitchen slabs. Delivery of “native” glass can be expected for several months.

Recovery instructions

It does not matter how the glass was damaged. It is not subject to restoration, which means that it is necessary to replace, since it is dangerous to operate a plate with such damage, sometimes even impossible.

• A broken part is taken out, freeing it from fasteners. The complexity depends on the model of your slab.
• The new glass sheet is carefully inserted into the grooves.
• The fastenings are returned to the place.

Sometimes you have to remove the oven door for replacing the glass.

Removing the damaged part

In most plates, the glass is held by the lower stop, and on top it simply enters a special groove on the bar. And it is fixed on the door with secret screws.

Rubber gaskets for fixation are not used, except for small rubber inserts that are located in the middle of the sides of the door. Stops are steel profiles that are attached to the door of the oven with ordinary screws (how to fix the oven doors at the stove?). For dismantling, you need to unscrew the screws.

• Take the cross screw and carefully unscrew the screws, holding the glass so that it does not fall down.
• The removed fasteners free the lower emphasis that falls and allows you to pull the glass.
• The glass itself needs to be pushed out carefully from the groove of the upper stop. To raise it, you can put the screwdriver into the resulting gap.

On some plates, the glass is attached to the sealant, so you have to “cut” it with a knife, separating the glass sheet from the door.

Replacement

Complete the replacement elementary: you need to take a new workpiece and place it in place, carefully moving into the space under the upper stop. But replacement on the plates, where the use of the sealant is provided, is performed differently:

• The new fragment needs to be degreased, dried for better gluing sealant.
• Glue, excess glue must be removed immediately: after hardening, it will be more difficult to do.
• Press the structure for 10 minutes to set.

You can use the oven after gluing only after 24 hours.

Installation of a new part

Installation on the screws in the reverse order. Having placed a fragment to the place, it is fixed with an emphasis from below and screws the screws. When installing, it is better to call the second person to help, who will hold the glass block while you fix it.

The screws should not be twisted too much, but not too weak, since strong or weak tension will again lead to deformation of the glass surface.

We suggest watching a video about the replacement of glass in the oven:

Rating of ovens with 3-steel doors

Beko BCM 12300 X

volume. 48 l;

energy consumption class. a;

maximum temperature. 280 ° C;

The number of heating modes is 8;

grill power. 2200 watts;

Dimensions (HSS). 45.559.456.7 cm.

Weissgauff Eoy 451 PDW

volume. 50 l;

energy consumption class. a;

maximum temperature. 250 ° C;

The number of heating modes is 8;

Dimensions (HSS). 59.54556.5 cm.

HotPoint-Ariston Fi7 861 SH BL HA

volume. 73 l;

energy consumption class. a;

maximum temperature. 250 ° C;

the number of heating modes. 9;

Grill power. 2450 W;

Dimensions (HSS). 5959.556.4 cm.

Bosch HBJ558YS0Q

volume. 66 l;

energy consumption class. a;

maximum temperature. 275 ° C;

The number of heating modes is 8;

Dimensions (HSS). 59.559.454.8 cm.

Maunfeld EOEM.769b2

volume. 76 l;

energy consumption class. a;

maximum temperature. 250 ° C;

the number of heating modes. 10;

grill power. 1100 watts;

Dimensions (HSS). 59.559.554.7 cm.

How to remove the loops?

We offer to familiarize yourself with the washing machine in the kitchen. how to place and improve the interior

The loops are removed in the same way as when removing the door. But you will have to unscrew several additional mounts. During execution, the structure will be divided into several parts. There are loops in one of them.

The oven can open poorly or close for the following reasons:

For ovens of the Bosch brand, the spring is placed on both sides.

In order not to break the loops when cleaning the doors, the following rules must be followed:

• You need to unscrew and remove the loops slowly, because if you do not calculate the strength, the details may break.
• Before removing the loops, make sure all the screws were twisted. If there is only one, the fastenings can bend, and then you will have to change them.
• Do not use force when separating doors or glass. Companies make ovens so that all its details can be removed without problems. If you feel resistance, most likely you are doing something wrong.

Removal process

Door fasteners to the oven

After you removed the door, you can start taking off the glass. In modern furnaces, two or three glasses mount. The second glass is usually attached to the body. Removing it is quite simple. It was necessary to remove the door for safe and convenient cleaning. If the door is not removed from the loops, there is a risk that it will slam it and a person will injure.

Do not press too much on the glass. When exceeding the force of exposure, it can be damaged.

• Put the door with a handle down on a smooth and soft surface.
• Pay attention to the presence of bolts in the door. If they are, unscrew them. If they are absent, start moving from the bottom up. The open door looks like a laptop. Bolts may be absent in some models of ovens. But the movement of the upwards up does not depend on the type of model.
• Now the glass part is released. It needs to be lifted up and pulled out.
• You can start cleaning glass.
• After cleaning, put the glass where it was. Please note that there are special strips on the sides.
• Fix all the fasteners.
• Install back on the oven.

Pull the upper part of the door from top to bottom

Openly the door is a little like a laptop

No matter what glass you need to remove. external or internal. In both cases, it is necessary to follow the above steps. Fastenings for both glasses are inside.

If you can’t clean the glass, you can contact professionals.

Why a person cannot find the necessary videos on YouTube? The thing is that a person cannot come up with something new and look for it. His fantasy ended. He has already revised a lot of various channels, and he no longer wants to watch anything (from what he watched earlier), but what to do in this situation? To find a video on YouTube, which meets your needs, you must definitely continue to search. The more difficult the search will be, the better the result of your search. Remember that you just need to find only a few channels (interesting), and you can watch them for a whole week or even a month. Therefore, you can, in the absence of imagination and unwillingness of the search, ask your friends and acquaintances. that they look at YouTube, they. Perhaps they will advise the original video bloggers that they like. You may also like them, and you will become their subscriber!

Online cutting mp3 is a convenient simple service that will help you create a musical ringtone yourself.

YouTube converter video Our online video converter allows you to download the video from the YouTube website in Webm, MP4, 3GPP, FLV, MP3 formats.

These are radio stations to choose from countries, quality styles. Radio stations around the world, more than 1000 popular radio stations.

Online broadcast with webcams is made absolutely free in real time-broadcast online.

Our online television is more than 300 populartv channels to choose from, according to genres countries. Broadcasting of television channels is free.

A great opportunity to start new relationships with a continuation in real life. Random video chat (roulette chat), the audience is people from around the world.

Like any kitchen technique, the oven can fail, which always upset, especially if the warranty period has already expired. What to do if the device has become faulty, what types of breakdowns can take place and in what cases the service center does not repair the oven cabinets? Answers to these questions are presented in this publication.

If the oven is out of order, and the warranty period has not yet expired, you need to contact an authorized service center or to the store in which the goods were purchased. A statement is written, on the basis of which the master comes and inspects the technique. If the breakdown is not complicated and it has the necessary spare parts, the repair of ovens, like any other devices, can be made at home. Otherwise, the unit will be taken to an authorized service center, in which a fault should be eliminated within 45 days.

If the buyer’s guilt does not break down, and the masters do not fit within the time period established by law, for example, due to the fact that there are no necessary spare parts or materials, then the equipment should be replaced by a new. Typically, manufacturers give a year of warranty, but there are some firms, for example, an eyelid that give 2 years or more.

Even if the equipment is under warranty, repair will not be free if:

• damage is caused by voltage drops;
• the breakdown occurred due to improper connection;
• Insects or rodents penetrated the closet;
• There are traces of autopsy and independent repair. scuffs, springs, scratches: in this case, the repair and spare parts will be paid, even if the breakdown occurred due to the fault of the manufacturer.

A completely different situation is formed if there is the owner’s fault in the breakdown, or the warranty period expired. In this case, people usually face a choice: contact the service, to the familiar master or try to eliminate the malfunction with your own hands. First you can try to independently determine what exactly failed. This will simplify the repair of the oven and will help the master navigate before he comes to the address. If we are talking about ovens, that is, several common breakdowns.

If the pie is prepared for a very long time, it remains pale on the one hand, despite the fact that the maximum temperature is set on the regulator, then you can suspect the failure of one of the heating elements. It is simple enough to determine this. you need to turn on the oven for a few seconds, then touch the hets, after protecting your hands with a sever. If there is no heating, the elements are subject to replacement. Such spare parts are usually inexpensive and you can change them without much effort.

If all heaters work, the oven is put at the desired temperature, and the pie is standing and not baked already a broken hour, it is possible that the whole thing is breakdown in the thermostat. It is quite difficult to reliably determine such a breakdown at home to an ordinary consumer, so you can’t do without calling a master here.

Models with an electronic display are very often programmed for self.diagnosis. In other words, if an error in the system occurs in the form of characters, they display information about it on the screen. Each manufacturers have their own manufacturers’ errors, they are described in detail in the instructions going to specific models. For example, if the Bosch oven does not turn on and signs E011 appeared on the display, then the possible cause of the malfunction is a long pressing of one of the buttons, when jamming or sticking. Repair of ovens in such cases is not carried out, such problems can be eliminated with your own hands, following the tips of the instructions.

It also happens that the malfunctions have nothing to do with the repair of ovens. We are talking about malfunctions in nutrition, about a cord accidentally pulled out of the outlet, about not a tightly closed door and other trifles. Oddly enough, because of such ridiculous accidents, the owners of the ovens spend a lot of nerves. Therefore, before you run to buy spare parts or call the master, you should make sure that the equipment is correctly connected.

These include a burned electronic module, a failed timer, damaged contacts and much more. The repair of ovens in this case should be carried out only in service centers, with your own hands to fix such problems is quite problematic.

Most buyers care about repairing the oven, which for several years now, is inappropriate to repair the oven during the break.

Almost every owner of a gas stove at least once in his life has encountered its breakdown. Often to seek help from the master is quite expensive, so home craftsmen are trying to independently eliminate problems so as not to transport the stove once again. There are such models of gas plates that can be completely repaired with your own hands, especially if problems are associated with flame adjustment, replacement of electric lighting and other insignificant breakdowns. In this article we will tell you how to repair the oven of a gas stove and a hob with our own hands, we will give a number of the most common breakdowns and ways to eliminate them.

Tips and recommendations

The following recommendations will help to facilitate cleaning and avoid the appearance of new spots:

• When baking products, use a sleeve, foil or parchment that prevent fat spraying.
• Immediately after cooling the oven, thoroughly wipe the door from the inside to remove fresh pollution and condensate.
• When processing the main part of the oven by the products against fat, glue the ventilation holes on the door with building tape or wide isolation.
• To soften the fat and rapid cleaning of the drones, you can use a steam generator or a steamer.