Home Electric stoves / gas stoves A fitting for connecting a gas stove under the hose
Electric stoves / gas stoves

A fitting for connecting a gas stove under the hose

Choose a fitting for a hose

The fitting connection is one of the methods of connecting a stationary pipeline or container for any liquids with a temporary or removable pipeline. Most often, flexible hoses act as a removable pipeline. The scope of hoses and fittings is very wide. This is a temporary country or garden pipeline for watering, and pipes for supplying liquid in hydraulic systems in industry and by transport, and flexible wiring for connecting to a stationary water supply or a sewage system of household appliances (primarily washing and dishwashers), and much more. In this material we will discuss options for fittings for various types of hoses.

Description and purpose

A classic fitting is a fitting for connecting a removable hose, it has a very recognizable look. This is a hollow tube made of metal or plastic, at one end of which the thread is either external or internal, and the other end is completely smooth, or has all kinds of recesses and bulges designed for a more tight fit of the elastic hose worn on it.

Often the fitting under the hose is supplied with the notch of the “Christmas tree”, which allows you to easily put on the hose, but its removal usually seems to be a more difficult task, since the “Christmas tree” with expanding faces is directed to the direction of the reverse direction of removing the hose.

This shape of the notch prevents the spontaneous breakdown of the hose with an increase in the pressure that occurs during the supply of fluid.

Description and purpose

A classic fitting is a fitting for connecting a removable hose, it has a very recognizable look. This is a hollow tube made of metal or plastic, at one end of which the thread is either external or internal, and the other end is completely smooth, or has all kinds of recesses and bulges designed for a more tight fit of the elastic hose worn on it.

Often the fitting under the hose is supplied with the notch of the “Christmas tree”, which allows you to easily put on the hose, but its removal usually seems to be a more difficult task, since the “Christmas tree” with expanding faces is directed to the direction of the reverse direction of removing the hose.

This shape of the notch prevents the spontaneous breakdown of the hose with an increase in the pressure that occurs during the supply of fluid.

Materials of manufacture

As already noted, the fitting can be made of metal or plastic. The material from which it is made affects the price of the product and is decisive to determine the area of ​​its use.

The plastic fitting will perfectly fulfill its functions when creating a temporary water supply for watering the beds in the garden or plantings in a summer cottage. The pressure in such a water supply is usually small, and the water temperature does not have critical values ​​that affect the properties of plastic. However, in this case, some technical improvements are provided, for example, the use of a quick.removable connection with a valve, which allows you to easily change the configuration of the pipeline without disconnecting the water supply.

A flexible fitting will also significantly increase the comfort of watering, preventing the twisting of the watering hose.

widely used metal fittings. Brass products have proven themselves in various fields. It is worth mentioning that they can be used to connect the hoses in the country or garden. However, the properties of the alloy fully allow the use of such products at high pressure or temperature not only in everyday life, but also in production.

A stainless fitting of appropriate alloys based on iron may be even more persistent. Such compounds often have to be used for hydraulic systems with very high fluid pressure or in various reactive media at the chemical industry enterprises.

It is clear that from the use of such a connection in a summer cottage can only be maintained by its considerable price compared to the plastic price.

Varieties of gas hoses

Pressure gas hoses produces a number of enterprises, on the market you can find goods from Belarus and a large assortment of Chinese manufacturers products.

Almost all hoses presented in the retail network can be divided into several groups.

Rubber with cloth reinforcement

Sleeves made of rubber with a cord. a classic of hoses produced several decades ago and are still frequent guests in the market. Flexible gas eyeliner with rubber has a passing channel of 9. 10 mm and an external diameter of 18 mm with terminal fittings for 1/2 inch. A rubber.tape hose can have on both sides, type of American type or an American fittings equipped with an external thread.

  • They have a low cost.
  • Have good flexibility and elasticity.
  • Their service life is at least 10 years.
  • Hoses are poorly protected from damage by sharp objects.
  • Are not conductors of electric current.
  • Over time, with low.quality rubber, they can crack, which is a signal to immediate replacement of the sleeve.
  • Do not withstand work in an environment with machine oil. This is not critical for use in the kitchen and may be important when connecting an eyeliner to a gas cylinder in the garage.

Connection of a gas stove. independent connection rules. The article reveals such topics, whether it is possible to independently connect a gas stove, what is better to connect it, as well as the stages of independent connection.

Rubber with external metal braid

This is the nearest analogue of widely known water. In appearance, they are absolutely identical with the only difference that yellow stripes are applied to the braid.

A flexible tube inside these hoses sometimes has a two.layer structure. a polymer is applied inside, preventing cracking and leaks, and over the outside, vulcanized rubber.

Sometimes the braid is additionally covered with a layer of transparent polymer. This facilitates and simplifies the care of its surface.

Features of rubber in the braid braid:

  • The service life is up to 10 years when working in the environment with temperature parameters up to 50 ° C.
  • Relatively low price and wide range.
  • Flexibility and elasticity.
  • Protected from damage to the shell with cutting objects.
  • The metal braid serves as an electric current conductor, so when connecting the hose it needs insulating dielectric inserts.
  • The disadvantages include the impossibility of visual control in case of damage or the appearance of cracks in the rubber shell leading to leaks. It is for this reason that flexible eyeliner from rubber with a braid is not too often used to connect gas plates.

Reinforced polyvinyl chloride

Are analogues of rubber with the cord. in the middle of the polyvinyl chloride shell there is a reinforcing mesh.

Visually polyvinyl chloride hose black (yellow) inside and upper yellow color. Its distinguishing features:

  • Low cost in comparison with bellows analogues.
  • The operational period reaches 15 years.
  • Lighter weight and smaller dimensions, unlike massive rubber.legged sleeves.
  • Average elasticity and flexibility that allow you to connect gas devices with relatively small angles of hindling.
  • Designed for pressure, 20 times superior pressure on the network.
  • Is a dielectric and does not need to be connected to electrolyplane adapters.

Sylphone hoses

Siphonnias are called eyeliners from corrugated stainless pipes, they are used in heating, water supply, and often with their help gas is brought to devices. Distinctive features of sylphons:

  • Are more expensive than other polymer inlets.
  • Have an aesthetic appearance.
  • Withstand pressure up to 6 atmospheres, exceeding nominal 200 times.
  • The manufacturer gives them a guarantee of at least 10 years, but theoretically they can serve all 30 years.
  • Capable of withstanding a temperature of about 200 ° C.
  • Have the ability to stretch, the slope angle and the eyeliner position can be fixed in any convenient position.
  • In high.quality bellows of threaded fitting and corrugation are made in the form of an all.metal node. this ensures a high reliability of the connection.
  • They cannot be damaged by sharp cutting objects.
  • Flexible footing of stainless steel gas conducts electric current, which creates the danger of its use in gas stoves that consume electricity. Therefore, when connecting sylphons, it is recommended to use dielectric insulating couplings. This leads to a rise in the cost of components and complication of installation. It has significant disadvantages. it is more rigid and does not allow to receive small bends of bends.
  • When using it, a situation often occurs when, during the movement or movement of a gas.consuming device, the shell is damaged and gas passes through it.
  • Often the bellows of the eyeliner are placed in a polymeric hose of yellow color. this allows you to easier to care for its surface.

Flexible gas eyeliner. installation rules

It is not recommended to connect a gas stove on your own. The gas is explosive and the slightest leak can lead to an irreversible catastrophe. Soap solutions, which earlier and now fans check leaks are not relevant for a long time.

Each galloper connecting the plate to the gas pipeline has highly sensitive electronic gas detectors. If, nevertheless, there is no way to call a specialist to connect gas-consuming devices to the highway and work with their own hands, it is worth observing the following rules:

  • To connect gas stoves, special flexible eyeliners with a yellow strip are used. In rubber and polyvinyl chloride products, a tag must be present indicating the manufacturer and the release date.
  • The permissible length of the hose should not exceed 4 m. If the distance is too large, a metal pipeline of the desired length is welded to the main line, to which the eyeliner is then screwed.
  • The hose should be solid, it is not allowed to lay it from two coatings of any type of connection.
  • The acquired flexible gas eyeliner should be so length to be located in a freely hanging position without tension.
  • When installing the slab, free access to the hose should be provided. This is necessary for its visual control for possible damage, cracking.
  • Some users do not suit the appearance of black rubber or yellow carts, and they try to take measures to change their color. The sleeve cannot be painted in any case, it is only acceptable to glue it with various films.
  • When installing metal bellows, it is necessary to take measures for their electrical insulation from the stove (connection through dielectric coupling). Otherwise, wandering currents can damage the corrugated shell, which will cause a dangerous leak.

What should be the minimum distance from the outlet to the gas pipe. Useful article which refers to the rules for placing gas pipes and sockets, the distance of sockets and an electric cable from a gas pipe.

Dimensions

Everything is strict enough here. There is a special standard that orders to set certain dimensions with typical fitting details. So, designs with a working diameter of 10 mm in the standard are provided, but all sorts of ½ inch, ¾ inch, 8 mm. no; they are produced mainly by special order. Other standardized values ​​according to GOST:

  • 6;
  • fifteen;
  • 25;
  • 32;
  • 40;
  • fifty;
  • 65;
  • 80;
  • 100 mm (there is even larger, but it is not so often found).

Materials of manufacture

In many cases, the best choice is a stainless steel hydraulic fitting with a thread. Such a product guarantees the reliability and stability of the connection of parts of a complex system. High.quality stainless steel may well be combined with pipelines from other materials. It steadfastly endures severe heating and is of little subject to corrosion, moreover, it is not reflected in the environment on the environment. The brass fitting is in demand both when creating pipelines and in engineering communications.

The advantage of such a solution is high resistance to moisturizing and decent strength. Solid brass is stronger than any plastic materials. Other important properties:

Materials of manufacture

In many cases, the best choice is a stainless steel hydraulic fitting with a thread. Such a product guarantees the reliability and stability of the connection of parts of a complex system. High.quality stainless steel may well be combined with pipelines from other materials. It steadfastly endures severe heating and is of little subject to corrosion, moreover, it is not reflected in the environment on the environment. The brass fitting is in demand both when creating pipelines and in engineering communications.

The advantage of such a solution is high resistance to moisturizing and decent strength. Solid brass is stronger than any plastic materials. Other important properties:

How to choose?

Before you start buying a gas stove hose, you need to pay attention to a number of points and listen to some recommendations.

  • Gas sleeves should be purchased in specialized stores that specialize in the sale of gas equipment. Such institutions, as a rule, work with trusted suppliers and sell only certified products. In addition, sales consultants have sufficient knowledge and are well versed in the intricacies of connection. Often in special stores you can apply for connecting a gas stove that people trained by this will be performed.
  • If, for any reason, it is not possible to purchase a hose in a narrow-profile store and you have to choose the sleeve yourself, then in this case the company-producer should be the main criterion for choosing. Experts do not recommend acquiring Chinese production models even if you have the necessary accompanying documentation and certificates. This is due to the fact that too many counterfeit goods are revealed among Chinese products, and it is almost impossible to distinguish a fake from the original. The difference in quality will make itself a little later, when the equipment is connected and begins to operate. Fakes are usually made of poor.quality material with violations of requirements for the thickness and density of the walls of the hose. As a result, a decent look of the sleeve can be very thin and quickly become unusable.
  • When buying a gas hose, it should be remembered that all models are equipped with a characteristic bright yellow label: in rubber products, it can be a bright yellow strip that goes along the entire length of the hose, at the sleeves in a metal braid-a yellow thread woven into the upper layer, and at Sylphone models. yellow paper cuff fixed on the sleeve. At the same time, plumbing models have blue-red markings and are not intended for gas transportation.
  • When choosing a gas hose, it is necessary to carefully examine it for external damage, and if defects are detected, pay the seller’s attention to them and not purchase a defective model.
  • Particular attention should be paid to the size of the threaded joints of the hose and selected in accordance with the size of the main gas pipe and the incoming furnace pipe. It should also be borne in mind that some models are equipped with threaded elements of a nut/nut, while others are equipped with a nut/fitting. Most of the compounds are available in size 1/2 or 3/4, which makes them completely compatible with any type of equipment.
  • The next selection criterion is the length of the hose. To determine the desired size, it is better to plan the location of the kitchen furniture and determine what distance from the gas tap there will be a stove. The length of the hose is selected so that the model does not sag and does not pull.
  • When buying a stove with an electric carbon stove, only dielectric samples must be purchased. An ideal option will be a fireproof flexible eyeliner with white plastic distilleries, which are installed in threaded joints. For lack of a special hose and insulators, the use of a dielectric insert is allowed.

In general, the requirements for the materials from which gas hoses are made are much higher than the requirements for the production of the same water sleeves. This is due to the fact that gas sleeves need to withstand very low temperatures that occur during the transportation of liquefied balloon gas. In addition, gas models should not burn themselves and maintain burning, as well as have the left thread.

However, the most important requirement for gas sleeves is the presence of an insulating insert, which was already mentioned above. The fact is that to increase the anti.corrosion stability of steel gas pipes located in the ground, they are given positive potential. And there is no guarantee that one of the tenants of an apartment building did not use a gas riser as a grounding of his household appliance.

Installation

Connecting gas stoves using a flexible hose is performed according to the standard scheme, which consists of the following stages: through each apartment of the gasified house a trunk pipe passes. riser. A pipe called by specialists leaves the riser, at the end of which a gas crane is installed. A gas meter is installed between the tap and the vacation, taking into account fuel consumption. The size of the crane section is usually 1/2, which corresponds to a diameter of 15 mm. One end of the flexible sleeve is screwed to the cranes, necessarily processing the threaded connection with a sealant.

The fastening of the hose should be carried out directly to the tap, no additional connections and unnecessary drives should be. The use of adapters is allowed only in case of emergency, when it is not possible to purchase a hose compatible with the output holes of the crane and furnace. In this case, all connections should also be well smeared with sealant and at the end of the installation are checked using soap foam.

If soap bubbles did not appear when starting gas on the surface, then the installation was carried out correctly and the device can be safely used. In addition, when connecting a flexible sleeve, it is necessary to install paronite gaskets equipped with a metal mesh and included in the hose set. The net will act as a kind of filter and protect the system from possible contaminants.

After the hose is connected to the gas cranes, it should be screwed to the plate. To do this, on the rear wall of the device is the input pipe, which can be located both perpendicular to the posterior wall of the furnace, and at a slight angle with respect to it. The angular location of the pipe is more preferable, since it does not allow sharp bending of the hose and allows you to install the plate almost close to the wall.

Often often the input pipe has a thread with a section of 3/4. In this case, it is necessary to use the footer. a special adapter with a diameter of 1/2. Connecting the hose to the furnace or adapter is performed using a unit nuts, which is tightened with an indistinguishable key. At the end of the installation, the connection is coated with sealant, and after drying it with a soap solution. Then the gas tap is opened and the connection is tested for the presence of leaks.

The above installation algorithm is exclusively advisory in nature, since all work on connecting the slab using a gas hose should be performed only. If for some reason the installation has to be performed independently, then you should familiarize yourself with some rules that will help to correctly connect a flexible hose, while observing all precautions.

  • It will not work to hide the sleeve on the floor or wall of the kitchen: it should be located in a well.accessible place and be in a free state.
  • The hose should not be twisted and too bent. The maximum permissible radius of the bending of the sleeve should be more than the amount of three of its diameters.
  • Stain the gas hose is prohibited. Paint contributes to excessive drying of rubber and threatens to crack it with a quick crack.
  • Elements of hose connection and adapters are often made of different metals, which threatens electrolytic processes and damage to metal parts. To prevent such troubles, only compatible metals can be screwed: copper with brass and steel with steel.
  • Excessive tug of nuts can cause their breakdown and will require replacing the entire hose.
  • Installation of flexible sleeves over 4.5 meters is prohibited. In the case of a significant removal of a gas stove from the main crane, extension of the withdrawal is performed using steel pipes. The implementation of any welding work on lengthening the “vacation” should be carried out after a complete disconnection of the house from gas supply and only by specialists of gas services.
  • At the end of the connection of a flexible hose in the subscriber gas book, a note is marked with the exact date of installation. This information will help not miss the deadlines and change the sleeve in time.

Description

The gas stove hose is a flexible pipe designed to connect the household appliance with the main gas pipeline through threaded connections. The main advantage of gas sleeves is their ability to ensure a tight connection in compliance with all safety requirements, as well as high elasticity, which allows you to move the device after connecting. The flexibility of gas hoses is especially important when installing kitchen sets, when there is a need to slightly adjust the location of the slab.

Before, before the appearance of gas hoses, the plates were connected using steel pipes. As a result, the devices “tightly” were installed in a certain place and it was impossible to move them at least a millimeter. With the advent of flexible sleeves, the situation has fundamentally changed, today the connected kitchen plate can be easily moved to another place or expanded.

Currently, many enterprises are engaged in the production of gas hoses, equipping them with comfortable connecting fittings and threads, as well as marking products with a strip of bright yellow, which will not allow to confuse a gas hose with water sleeves.

The modern gas equipment market presents hoses for connecting kitchen plates in a wide range. At the moment, there are 4 varieties of pipes made of various materials and having their pros and cons of.

Oxygen hoses

At one time, they acted as an alternative to steel pipes and became the “pioneers” of a flexible connection. Sleeves are made of thick rubber, have a short service life, are not subject to painting and often crack under the influence of high temperatures. Among the positive aspects of using such models, ease of installation, low cost, wide purchasing distance and the ability to withstand pressure up to 20 atm were noted. over, oxygen hoses do not conduct electric current and are produced in a wide variety of sizes, which allows you to choose a pipe for any diameter of the main pipe.

An important condition for the use of oxygen models is their inner diameter, which should not be less than 1.6 cm. This requirement is dictated by security standards and should be strictly executed. However, when installing oxygen sleeves, you need to know that this type does not belong to the category of gas hoses, therefore, it can be used in case of emergency or as a temporary connection. The installation of the sleeve should only be performed by a specialist.

Rubber models

Are the most budget option for a flexible eyeliner designed to connect gas furnaces. Products are made according to GOST 9356 75 and consist of an elastic rubber layer covered with a threaded frame made of cotton or synthetic fiber. Products are characterized by high elasticity, able to operate at temperatures from.35 to 70 degrees and maintain gas pressure up to 0.63 MPa.

In addition, rubber.legged models do not conduct electricity, thanks to the soft structure, it can be cut to the desired length and represented on the domestic market in a wide range. The disadvantages include weak stability of the hoses to temperature changes and mechanical exposure, as well as the tensions of rubber to drying and natural aging. As a result, the sleeve quickly loses its original elasticity and cracks over time. For these reasons, use an rubber.legged hose for no more than 2 years, after which it must be replaced.

Despite the simplicity of installation, only a specialist should be engaged in the installation of an rubber band model.

Gas hose with a metal braid

Is an ideal option for the ratio of price and quality and is widely used. For the manufacture of such models, vulcanized rubber is used, which is reinforced with textile threads, and is covered with a metal braid on top. Outwardly, such models are very reminiscent of a flexible eyeliner for a shower, cranes and tanks of the toilet, and differ from plumbing pipes by the presence of a yellow thread in a braid. Among the positive qualities of such products, high reliability, ease of installation, long, compared with the previous type, can be noted, the service life and a large range.

How to choose?

Before you start buying a gas stove hose, you need to pay attention to a number of points and listen to some recommendations.

  • Gas sleeves should be purchased in specialized stores that specialize in the sale of gas equipment. Such institutions, as a rule, work with trusted suppliers and sell only certified products. In addition, sales consultants have sufficient knowledge and are well versed in the intricacies of connection. Often in special stores you can apply for connecting a gas stove that people trained by this will be performed.
  • If, for any reason, it is not possible to purchase a hose in a narrow-profile store and you have to choose the sleeve yourself, then in this case the company-producer should be the main criterion for choosing. Experts do not recommend acquiring Chinese production models even if you have the necessary accompanying documentation and certificates. This is due to the fact that too many counterfeit goods are revealed among Chinese products, and it is almost impossible to distinguish a fake from the original. The difference in quality will make itself a little later, when the equipment is connected and begins to operate. Fakes are usually made of poor.quality material with violations of requirements for the thickness and density of the walls of the hose. As a result, a decent look of the sleeve can be very thin and quickly become unusable.
  • When buying a gas hose, it should be remembered that all models are equipped with a characteristic bright yellow label: in rubber products, it can be a bright yellow strip that goes along the entire length of the hose, at the sleeves in a metal braid-a yellow thread woven into the upper layer, and at Sylphone models. yellow paper cuff fixed on the sleeve. At the same time, plumbing models have blue-red markings and are not intended for gas transportation.
  • When choosing a gas hose, it is necessary to carefully examine it for external damage, and if defects are detected, pay the seller’s attention to them and not purchase a defective model.
  • Particular attention should be paid to the size of the threaded joints of the hose and selected in accordance with the size of the main gas pipe and the incoming furnace pipe. It should also be borne in mind that some models are equipped with threaded elements of a nut/nut, while others are equipped with a nut/fitting. Most of the compounds are available in size 1/2 or 3/4, which makes them completely compatible with any type of equipment.
  • The next selection criterion is the length of the hose. To determine the desired size, it is better to plan the location of the kitchen furniture and determine what distance from the gas tap there will be a stove. The length of the hose is selected so that the model does not sag and does not pull.
  • When buying a stove with an electric carbon stove, only dielectric samples must be purchased. An ideal option will be a fireproof flexible eyeliner with white plastic distilleries, which are installed in threaded joints. For lack of a special hose and insulators, the use of a dielectric insert is allowed.

In general, the requirements for the materials from which gas hoses are made are much higher than the requirements for the production of the same water sleeves. This is due to the fact that gas sleeves need to withstand very low temperatures that occur during the transportation of liquefied balloon gas. In addition, gas models should not burn themselves and maintain burning, as well as have the left thread.

However, the most important requirement for gas sleeves is the presence of an insulating insert, which was already mentioned above. The fact is that to increase the anti.corrosion stability of steel gas pipes located in the ground, they are given positive potential. And there is no guarantee that one of the tenants of an apartment building did not use a gas riser as a grounding of his household appliance.

Gas hose

Denzel fitting art. 97271 is designed to connect pumps and pumping stations with a thread G1 “and a garden hose with a diameter of 1”. Advantages: the fitting is made of brass, so it does not deform from the effects of hot water and compressed air, and also does not rust. Outer.

Bitter for hose 1 with external thread G1 Denzel 97271

The fitter “Christmas tree” with a removable nut to the valve Balon is designed to connect a propane cylinder with a gas hose without using a gearbox. Made of brass. For a diameter hose 9. 12 mm

A fitting with a removable nut M22, left thread on the WB art.7700

Characteristics Material: Chrome Brass thread: 1/4 “NPT External diameter: 13 VEC: 36 Manufacturer: Easterner Manufacturer Land: Taiwan Description Fuel adapter for portable tanks Tohatsu. Is not a replacement for the standard adapter 3E0-70270-0 and is not compatible.

Fuel fitting in a tank (adapter; metal), compatible with C14504T, # 00018180

Characteristics Material: Chrome Brass thread: 1/4 “NPT External diameter: 11 Manufacturer: Easterner Manufacturer Country: Taiwan Description Adapter for portable fuel tanks. Compatible with Connector C14504. Courier delivery or terminal? The method depends on.

Fuel fitting in Suzuki tank (adapter; metal; OD: 11MM), compatible with C14504, # 00056542

Palisad 66565 brass-mounted armored adapter allows you to build a hose or connect 2 hoses of different diameters. Suitable for creating durable watering systems and will be useful in a summer house. Advantages of the adapter is made of brass, so character.

Latuiner adapter, fittings Palisad 66565

The brass adapter Palisad 65851 with an external thread with a diameter of 1 inch serves to connect a irrigation system with a crane or pump. Used to organize watering plants in the garden or in a summer cottage. The advantages of the adapter are made of brass, therefore it is resistant to.

Bettlement adapter, 1, external thread Palisad 65851

A fitting for a hose with an external thread 3/4 “x25 mm ctm. threaded fitting designed to connect a watering hose to a water supply valve or directly to the pipeline. The product can also be used in other systems with non.aggressive to the mother used.

A fitting for a hose with an external thread 3/4 “x25 mm ctm

Denzel fitting art. 97272 is used to connect pumps and pumping stations with a thread G1 “and a garden hose with a diameter of 3/4”. Advantages: the fitting is not deformed, and also does not rust from the effects of hot water and compressed air, t.to. Made from brass. Reliable fi.

Bitter for a 3/4 hose with external thread G1 Denzel 97272

A fitting for a hose with an external thread 1/2 “x10 mm Ctm. threaded fitting designed to connect a watering hose to a water supply valve or directly to the pipeline. The product can also be used in other systems with non.aggressive to the mother used.

A fitting for a hose with an external thread 1/2 “x10 mm Ctm

(VTR.654. N) a fitting for a hose with internal threads is made of high.quality plumbing brass brand CW617N by hot pressing with a protective galvanic coating (nickel). Fiting threads. inch, with a diameter of 1/2 or 3/4 “Sizes w.

A fitting for a hose with an internal thread 1/2 “x 16mm VALTEC VTR.654.N.0416

The coater-stroke adapter is made of shockproof ABS plastic. Designed to increase the length of the hose or connection of different types of hoses. Can be used as a temporary repair coupling. Steper output is compatible with all elements of watering systems.

Platmarm, fitting Palisad 66465

John Guest PM251008E FITSENT WITH THE STRUCTION CONNECTION: A smooth rod with an outer diameter of 10 mm. ribbed rod 8 mm. Material: Acetal Sopolymer. Wednesday: pneumatics, compressed air, neutral gases, water, drinks. t and pressure: from.20 to 20s. 16 bar, 65C.

The brass adapter Palisad 66272 with an external thread with a diameter of 1/2 inch serves to connect a irrigation system with a crane or pump. Used to organize watering plants in the garden or in a summer cottage. The advantages of the adapter are made of brass, so stable.

Bettlement adapter, 1/2, external thread Palisad 66272

Palisad Luxe 66247 fitting connector with an internal thread 1/2-3/4 inches and a hinge is used in watering systems. It allows you to connect the hose to the crane, so it will be useful to summer residents and utility staff. Advantages of strength and durability. frame.

The fitting connector with an internal thread 1/2-3/4, with a cartoon luxe 66247

A fitting for a hose with an external thread 3/4 “x20 mm Ctm. threaded fitting designed to connect a watering hose to a water supply valve or directly to the pipeline. The product can also be used in other systems with non.aggressive to the mother used.

A fitting for a hose with an external thread 3/4 “x20 mm Ctm

The rapid combination connection is used to connect the hose to the apparatus. On the one hand, the fitting has an external thread. 1/2 “dad, on the other, a quick.detachable connection. 10mm. The created design has high reliability and tightness

A fitting for connecting a gas stove under the hose

21st International Exhibition of welding materials, equipment and technologies October 11-14, 2022 MVC Crocus Expo, Pavilion 2, Hall 8

Briefly about the Cold Weld Tig technological process, which allows you to weld thin details without deformation and burning.

What is a rheostat: its application, device and principle of operation.

Consider the forms of release, marking, types and features of welding wire, which is useful for competent selection of consumables for specific work.

Author

Laidred

| Denial of responsibility | Contacts |RSS