Home Gadgets 8BitDo Wireless USB Adapter. Wi-Fi adapter USB c

8BitDo Wireless USB Adapter. Wi-Fi adapter USB c

BitDo Wireless USB Adapter

8bitdo, wireless, adapter, wi-fi

Connect nearly all wireless controllers to your Switch, Windows, macOS, Raspberry Pi and more.

Note: Xbox Bluetooth controllers on the latest firmware released in Sep, 2021 are NOT supported any longer, due to their bluetooth change from Classic to BLE.

8bitdo, wireless, adapter, wi-fi

Compatible with all 8BitDo Bluetooth controllers. Next Gen too.

Compatible with all 8BitDo Controllers, PS5, PlayStation 4, PS3, Switch Pro, Switch Joy-con, Xbox One S/X Bluetooth controller, Wii Mote, Wii U Pro and more.¹

BitDo Ultimate Software

Ultimate software is now compatible with 8BitDo Wireless USB Adapter. Ultimate Software gives you elite control over every piece of your controller: customize button mapping, adjust stick trigger sensitivity, vibration control and create macros with any button combination. Create controller profiles and switch between them at any time.²

Ultimate Software is not supported on Mac mode.

8bitdo, wireless, adapter, wi-fi


Assign the buttons with the functionality to your liking

8bitdo, wireless, adapter, wi-fi


Customize each stick for a higher precision control

8bitdo, wireless, adapter, wi-fi


Adjust the ranges of your triggers to act faster

8bitdo, wireless, adapter, wi-fi


Modify the vibration intensity for a better comfort during gameplay

8bitdo, wireless, adapter, wi-fi


Assign a long sequence and action to one single button

8bitdo, wireless, adapter, wi-fi

Best Kali Linux Wi-Fi Adapter with Monitor Mode 2023

This list review the best kali Linux Wi-Fi adapter Depending on the chipset.People seem to get confused when we talk about kali Wi-Fi adapter and wireless cards, they don’t know what they are, why do we need them and how to select the right one because there is so many brands. The thing is not every Wi-Fi card support Monitor mode, and packet injection, that’s why we created this Kali Linux Wi-Fi adapter list.

For network security analyses and penetration testing, many people use Kali Linux as their operating system. There are a number of things to take into consider when choosing a USB Wi-Fi adapter for Kali Linux, including compatibility, range, and speed. The top USB Wi-Fi adapters for Kali Linux are listed below:

The best Wi-Fi adapter for Kali Linux As has been said many times, there is no “Best Wi-Fi adapter” Sometimes you need to work quietly and we need a tiny Wi-Fi adapter, sometimes we work in the “concrete jungle” and we need the most powerful and most sensitive device with large antennas.Some of us live in areas where there is an abundance of 5.0GHz ac Access Points, but in some places, there are simply no Access Points on 5.0GHz. Someone can easily afford to spend 50 bucks, and someone is looking for cheap adapters in the secondary market.

Our tasks are different, our environment is different and the best USB Wi-Fi adapter for kali Linux for us will also be different devices. But there are rules that work well:

  • Adapters with large external antennas are usually more sensitive and powerful (this is important)
  • alfa Wi-Fi adapter are a good choice for most.

Why you need a USB Wi-Fi adapter for kali Linux?

A USB wireless adapter is a device that you connect to your computer through a USB port and it allows you to communicate with other devices over Wi-Fi so you can use it to connect to wireless networks and communicate with other computers that use Wi-Fi,now you may say that your laptop already has this and yes that’s correct most laptops and most phones already have this built-in but there’s two problems with that though

  • The first problem is you can’t access built-in wireless adapters through kali if it’s installed as a virtual machine
  • The second problem and the most important problem is the fact that these built-in wireless adapters are not good for hacking

so even if you install kali Linux as a main machine and then you’ll have access to your built-in wireless card but still you won’t to be able to use this wireless adapter for hacking because it doesn’t support monitor mode or packet injection.So, if you want to be able to use it to Wi-Fi audit and do all the cool stuff that we can do in kali Linux with aircrack-ng and other tools you need to get a kali Linux USB Wi-Fi adapter.

Depending on the selected chipset, there may be nuances. The Realtek chipset has problems (solved) when attacking WPS, and the Atheros chipset seems to be incapable of capturing PMKID.

Wrong: at least Alfa AWUS036NHA (chipset: Atheros AR9271) can catch PMKID (for attacks on Access Points without clients, Learn about these attacks here).

Here is a large list of monitor mode Wi-Fi adapter and wireless adapter capable of injection.

With any of these models, you can grab a handshake and perform most of the wireless attacks.In addition to the monitor mode and wireless injections, in some attacks, the Wi-Fi adapter also requires AP mode and support for virtual wireless interfaces. See the article “ How to determine which Wi-Fi adapter is suitable for Kali Linux ” for details.

If you purchased a dual-Band (2.4GHz 5.0GHz) adapter, you need to install the rtl8812au driver, to do this please follow this tutorial: how to Install rtl8812au Drivers on Kali Linux

RTL8812AU and RTL8814AU

The difference between RTL8812AU and RTL8814AU chipsets in the ability to support a different number of antennas.

In some cases, depending on the circuit design of the device manufacturer or firmware, one antenna can be used only for transmission, and the other only for reception. Also, some devices work only in one range of choice, others – in two ranges simultaneously. This also needs to be considered when purchasing devices.

Some manufacturers, for example, Alfa AWUS036ACH. Alfa AWUS1900. TRENDnet TEW-809UB. use additional chips (for example, signal amplifiers) and may have other nice features.

For those who decide to save money and buy products on sites like AliExpress on the above-mentioned chipsets. Antennas can be 2, 4 or even more, but very important for these 2.4/5.0 GHz chipsets is also MIMO, which, when using multiple antennas, increases the chance of capturing a handshake and is also crucial for achieving maximum transmission speeds data under normal use.

But, unfortunately, Chinese manufacturers often multiplex antennas instead of MIMO or simply place non-connected antennas.

So let’s see what’s the best Wi-Fi adapter for kali Linux in our monitor mode Wi-Fi adapter list and lets start with dual Band.

Dual Band (2.4GHz 5.0GHz) Wi-Fi 802.11a/b/g/n/ac USB Adapters

1-Alfa AWUS1900

8bitdo, wireless, adapter, wi-fi

Alfa AWUS1900

  • excellent manufacturer
  • No locked functions
  • interchangeable antennas
  • Modern RTL8814AU chip

Feedback:The main advantage is the Taiwanese manufacturer Alfa and its usual advantages: nothing is blocked, strong assembly, orientation to the connection, and not design, like that of a fellow on the chip from Asus or D-Link. The RTL8814AU chip is a successful design, with which additional antennas are only a plus. That is, at the hardware level, everything is fine, but at the driver level – under Windows and MacOS, the native one is available, that is, it is not Alfa that provides it, but Realtek itself. And this driver is terrible.

The driver loses the signal, can “forget” about the 5-gigarz channels, disconnects, does not provide stable quality, forgets to switch communication modes, “shits” into the RAM, with loads like torrents it can simply be cut off. If this happens, try resetting the driver in the device manager,

Under MacOS, the driver is much better. And under Linux, several are being developed at once, and nowhere are there any problems with Windows. However, on all OSs, AWUS1900 can decide that it is connected to USB2.0, even if the wire is in USB3.0. According to the site, the adapter should automatically switch modes depending on which port is inserted, and it works every other time. Perhaps in the following revisions this will be fixed. Alfa AWUS1900 is the best monitor mode Wi-Fi adapter in our list

2- Alfa AWUS036ACH

8bitdo, wireless, adapter, wi-fi


  • Excellent manufacturer
  • No locked functions
  • interchangeable antennas
  • RTL8812AU chip
  • Stable pings
  • Frequency Band:
  • 2.4 GHz 5 GHz

Alfa AWUS036ACH (chipset: Realtek RTL8812AU)

Advantages: Well, actually the most important plus is (. ) Injection (. ), but it supports it, and in Windows too. Power – you can pile as much as 2.5 watts. This adapter is also supported in CommView Wi-Fi. Stable pings. You can tweak the simultaneous use of multiple access points.

Disadvantages: In terms of functionality, the RTL8812AU chipset does not support the 802.11ac standard a modern high-speed PIMO 4×4 mode, it is clearly inferior in sensitivity to the flagship model from Alfa Network AWUS1900, but still it’s one of the best Wi-Fi hacking adapter.

3- Alfa AWUS036AC (chipset: Realtek RTL8812AU) Get AWUS036AC from amazon

Advantages: Speed, signal stability, two ranges, 2 external antennas, docking station, USB 3.0.Disadvantages: No significant deficiencies.comment: The five concrete walls for this whistle are not a hindrance. No problem got on Windows 7 and 8.1. Tested on 4 different devices.

From the merits imply disadvantages – size. When installed in USB on a straight line, bypassing the docking station takes up a lot of space: you will not plug anything into the next port. However, significant problems with portable use due to bulkiness was not observed.

4-TRENDnet TEW 809U

8bitdo, wireless, adapter, wi-fi


  • Wi-Fi standard: 802.11a/b/g/n/ac
  • Max. speed: 1300 Mbit/s
  • USB 3.0 connection
  • interchangeable antennas
  • Chipset: Realtek RTL8814AU
  • Frequency Band:
  • 2.4 GHz 5 GHz

Trendnet ac1200 dual Band wireless USB adapter kali linux

The total bandwidth of the TrendNet TEW-809UB is 1900 Mbps (1300 Mbps in the 5 GHz Band and 600 Mbps in the 2.4 GHz Band).The presence of four antennas allows you to implement beam forming technology for a more confident connection. The TEW-809UB comes with a USB 3.0 cable length.

5- Panda Wireless PAU09 N600 (chipset: Ralink RT5572) Get PAU09 N600 from amazon

Panda wireless pau09 n600 is capable of switching to monitor mode and making wireless injections,The card supports several Linux distributions, as well as Windows. The wireless card has two 5dBi antennas to enhance the signal. Specifications

  • Protocols: 802.11n
  • Speed: 300Mpbs
  • Chipset Ralink RT5572
  • Frequencies: two 2.4GHz and 5GHz bands
  • Two detachable 5dBi antennas

6- TP-Link TL WN722N

8bitdo, wireless, adapter, wi-fi

TP-Link TL-WN722N

  • Chip: Atheros 9271
  • Standards: 802.11b, 802.11g, 802.11n
  • Frequency range: 2400-2483.5 MHz
  • Transmitter power: 20 dBm
  • Antenna : removable omnidirectional antenna (RP- SMA)

TP-Link TL-WN722N

TP-liNK – model TL-WN722N v.1.0. The device has been produced for several years and in terms of technical characteristics, by current standards, it does not represent anything outstanding – the maximum wireless connection speed is only 150 Mbps. A feature of the model is the presence of an external removable antenna with a gain of 4 dBi, which, according to the manufacturer, can significantly increase the signal power.

7- TP-Link Archer T9UH


  • Frequency bands: 2.4 GHz and 5 GHz;
  • Four high gain antennas;
  • Beamforming technology;
  • WPS button
  • Chip:RTL8814AU

TP-link Archer T9UH AC1900

The Archer T9UH is capable of operating in one of two bands: the 5 GHz channel is suitable for online games and HD video streaming, and the 2.4 GHz channel is suitable for surfing the Internet and video conferencing. The adapter provides data transfer rates up to 600 Mbps over 2.4 GHz and up to 1,300 Mbps over 5 GHz.

8- TP-LINK Archer T4UH (rev V2, chipset: Realtek RTL8812AU)Get Archer T4UH from amazon9- TP-LINK Archer T4U (rev V3, chipset: Realtek RTL8812AU) Get Archer T4U from amazon

10- D-Link DWA-192 (chipset: Realtek RTL8814AU) Get DWA 192 from amazon

  • The design is rather good than bad
  • Excellent speed – squeezes everything my provider can give
  • Never in half a year of use did you have to reboot – plugged in and forgot!

Comment: The home nonprofessional test showed that there are practically no noticeable differences in the actual data transfer rate between the mini-PCI-E adapter with a speed of 867 megabits and the DWA-192 with its 1300 megabytes. I admit, however, that the difference with other external adapters, and even more so the standard 802.11n, will be much more noticeable.

11- D-Link DWA-182 (rev C, chipset: Realtek RTL8812AU) Get DWA-182 from amazon

Advantages:– No out-of-order diode.– Relatively compact– Supports USB 3.0 and 5 GHz (in my rev. C1A)– Overheating has not yet hung upDisadvantages:– None of the drivers from D-link stably does not work– There is no USB extension cable in the set (it would not hurt)

12- Edimax AC600 USB (chipset: Realtek RTL8811AU) Get AC600 USB from amazon

13- Netis WF2190 (chipset: Realtek RTL8812AU) Get Netis WF2190 from amazon

Advantages:– AC speed– Dual antenna signal– USB 3– USB extension– removable antennasDisadvantages:Over 2 weeks of use, I did not find any problems.comment: Chip Realtek RTL8812AU.

14- Tenda U12 (chipset: Realtek RTL8812AU) Get Tenda U12 from amazon

Advantages:Performs all functions perfectly.Disadvantages:On Win10 without drivers it did not start, I had to install it.comment:The speed does not sink, it looks decent, Wi-Fi at 5GHz catches instantly.

15- ZyXEL NWD6605 (chipset: Realtek RTL8812AU) Get NWD6605 from amazon

Single-Band 2.4GHz Kali Linux Wi-Fi adapters

16- Alfa AWUS036NHA

8bitdo, wireless, adapter, wi-fi


AWUS036NHA – is capable of supporting MIMO (Multiple Input Multiple Output) – a method of spatial coding of a signal, allowing to increase the channel bandwidth in which data transmission and data reception are performed by systems from several antennas.

Alfa AWUS036NHA (chipset: Atheros AR9271)

One of the most knowen monitor mode Wi-Fi adapter is Alfa AWUS036NHA it’s a Wi-Fi USB adapter that supports IEEE 802.11 b/g/N. Able to create networks with transmission speeds up to 150 Mbps in the 2.4 GHz Band, which is also compatible with IEEE 802.11 b/g for connecting wireless devices at speeds up to 54 Mbps.

ALFA AWUS036NHA is built on the atheros ar9271 chipset, the adapter does an excellent job with the functions of wardriving, testing for penetration of wireless networks and solving non-trivial tasks.The ALFA 036NHA adapter works great with the Kali Linux operating system, ar9271chipset is one of the best chipset you can ever find.

17- TP-LINK TL-WN823N (rev v1, chipset: Realtek RTL8192CU) Get TL WN823N from amazon

Cheap wireless adapter for kali Linux TP-Link TL WN823N is a wireless Wi-Fi adapter that is designed to connect your computer to a Wi-Fi network for future use of the Internet. This adapter has a compact size and is connected to the computer via a USB connector with a very cheap price.

18- TP-LINK TL-WN822N (rev v3, chipset: Realtek RTL8192CU) Get TL WN822N from amazon

tp-link tl wn822n Advantages:– a long USB adapter, it is convenient to bring the adapter to a better place– it connected to Windows 10 with the latest update automatically, even the driver did not have to be installed, although the third version of the adapter was caught– a reasonable pricetp-link tl wn822n Disadvantages:haven’t noticed yet

19- TP-LINK TL-WN821N (rev v4, chipset: Realtek RTL8192CU) Get TL WN821N from amazon

20- Asus USB N13 (rev B1, chipset: Realtek RTL8192CU) Get Asus USB N13 from amazon

Asus USB N13 advantages:Works with those characteristics as stated.N13 Disadvantages: Not foundComment: At home, the internet rate is 100mbps, measured at speedtest showed 92/94mbps, the losses are minimal. I use it in conjunction with Asus RT-N12E, tkip-aes is set up in the settings.21- Panda PAU06 USB (chipset: Ralink RT5372) Get Panda PAU06 from amazon

22- Panda PAU05 USB (chipset: Ralink RT3070) Get Panda PAU05 from amazon

23- Netis WF2123 (chipset: Realtek RTL8192CU) Get Netis WF2123 from Amazon

So this was a list of best compatible USB wireless adapter for kali linux but we still have more for internal Wi-Fi adapter.

Internal Kali Linux Wi-Fi For laptop

Some laptops have wireless adapters pre-installed that can be listed as monitor mode Wi-Fi adapter. For example, Intel chips can do this. over, they also support the Access Point mode and virtual interfaces. Apparently, it’s a matter of good support for Intel wireless drivers for Linux. Therefore, they are suitable for daily use in Linux, as well as for wireless attacks.

I had laptops with the following adapter models

  • Intel Wireless-AC 9560 [Jefferson Peak] (rev 10) – has 2 × 2 antennas, supports MU-MIMO and supports AC
  • Intel Centrino Advanced-N 6235 (rev 24)

They work very well for transferring data or grabbing handshakes. I think that all representatives of the Wireless-AC and Intel Centrino Advanced-N lines support monitor mode and wireless injections. Therefore, Intel internal adapters help me when I cannot use Alfa external adapters. But, of course, you need to make a correction for the absence of external antennas.

Popular chips and their featuresIt may seem that choosing a USB adapter for auditing wireless networks is simple. In theory, enough to buy any device with a suitable chip, and you can go to conquer the access point. In practice, there are plenty of unobvious things and important details.

Комментарии и мнения владельцев

Im looking for Wi-Fi adapter supports packet injection, what’s the most powerful dual Band Wi-Fi adapters for packet injection and monitor mode ?

All of these adapters in the list support monitor mode and packet injection even the 13 USB Wi-Fi adapter works perfectly fine

running ‘netsh wlan show wirelesscapabilities’ on my laptop with intel 9560 chipset shows that it does not support promiscuous mode.

Alfa AWUS036ACH has been my favorite adapter for years, with it’s chipset RTL8812AU it has been one of the best Wi-Fi adapter for kali ever

Have absolutely never gotten our one to work and it was 100 bucks too. Don’t know how all these sites still recommend it.

I am planning to buy ALFA AC1900 but after reading Комментарии и мнения владельцев about driver failure i got confused. Similarly ALFA AC1200 is not recognising ac or 5ghz channels for packet injection. I am extremely confused what to do now

Alfa AC1900 Works fine you just need to install the right drivers to support monitor mode and packet injection

Great article, Thanks for the Detailed Analysis of the USB Wi-Fi adapter. Would you please tell me that, do I need a Wi-Fi adapter for Kali Linux if I have a laptop?

But they already explained that in the article didn’t they? If you’re using a virtual machine of Kali, you’ve got some issues accessing the Wi-Fi hardware. I’ve done it before( I honestly don’t know what they mean) then they said Even with a base metal install some chipsets built into laptops don’t do monitor mode and even more don’t do injection… (Some lol) But that might’ve been a different article I was reading… And my base metal installed (HP- beats by dre edition ) laptop has no problem doing those… But I’ve never been able to successfully run wifite and I’m pretty sure the pmkid thingy could’ve been to blame so. it seemed to have some problems I ultimately was able to capture handshakes with it so you might wanna do some more research and don’t take out words for it… Infosec prolly got some good info on the issue. idk hope that helped, if you really wanna

I bought the Trendnet AC1900 TEW 809UB (for 30 bucks; a steal for the extra power), not realizing it didn’t have good Linux driver support but I had got it working with help from 3rd party Github drivers on an older Kali version (Kali 5.12 to 5.14, I think)… Since I updated to 5.15 It doesn’t want to quite run properly It’s detected as NIC with lsusb but doesn’t come up with iwconfig or ifconfig at all…. so it’s buggy but the range was suuuper impressive when it was working lol…. any advice is much welcome btw.

I have bought tenda 331m which has rtl8818gu chipset. It gets detected by lsusb but not in ifconfig.plz suggest.

Thanks for the very nice article. I have a question, are all the Wi-Fi adapters listed here capable of monitor mode and packet injection on KaliLinux?

But tp-kink tl-wn823n (chipset RTL8192eu) supports monitor mode and not packet injection. Why is that?

I think I get the gist of things, that is that all of the adapters on the list support monitor and injection mode but I’m ever so slightly confused by the fact that all the way up until the Archer T9UH, there are specific Комментарии и мнения владельцев relating to the adapters’ use for hacking purposes, ie.,as it relates to handshakes, monitoring, injection etc but then for some reason, the comment associated with the Archer T9UH looks like it came out of a PCWorld magazine or something, certainly nothing related to hacking but rather to its functional application for use in connecting to the internet and nothing more. While I’m a noob where a lot of this is concerned (admittedly I purchased the Archer T9UH oblivious to the fact that it had monitor and injection mode support and to make matters worse depending on how you look at it, I have been using a Linux aircrack-ng driver from Chaotic-AUR with it ever since purchase, knowing that a world of presently hidden capabilities existed but never taking the time to learn a little bit more about it all). Fast forward to now and I’m attempting to change all that but I’m starting from scratch with nothing more than the knowledge that my Wi-Fi adapter supports this as of yet still mysterious functionally. I know there’s not really a question in there, more like I’m curious why starting with the adapter that I purchased on a wimb did the Комментарии и мнения владельцев change tone from directly relating to their use in and for the dark arts to the equivalent of a turkey and extra mayo sandwich, if you catch my meaning (I can have a strange way with words and I can’t use the excuse that English isn’t my first language bc it is. Really it’s my only language, I have barely passable conversational skills on a superficial level in German and Portuguese and a little bit Spanish Italian but only because of the Portuguese knowledge but it’s not even close to fluency so yeah I’m just a weird bird but I have a feeling I could find my flock or at the very least some other weird birds even if everyone flies at their own speed and altitude amongst the type of person that runs Kali as a daily driver) I feel like there’s some part of me that’s known all along that I would find my way into this world but hesitating due to the sheer size and scope of the required reading, so to speak. Regardless, I’ve been slowly inching my way there, starting with embracing Linux and command line 3-4 years ago which lead to virtual machines and rooting Android devices, playing around with SBCs (O-droid N2 4gb) and just general ripping apart whatever tech i can get my hands on (that I’m comfortable with possibly borking) and seeing if I can mod it in some way or at least gain some new understanding about how it’s components and underlying technical concepts, etc. work. Or at the VERY least, be able to put it back together again and have it work. Considering it’s usually done with something featuring at least 1 failure point, usually at a hardware level, this isn’t necessarily a walk in the park. I’ve become fairly productive with a soldering gun/pencil, though. Even if it doesn’t end up leading me to the promised land, it’s still damn satisfying when you slap it all back together and have a working X,Y or Z. Earlier when I said I have a funny way with words I should have just called a spade a spade and admitted that I’m extremely long-winded. If you actually read all of the above and have any words to share with a Lost Boy, I’m all PS – I’m not currently daily driving Kali, at least not on bare metal but I have it in a VM. My daily driver is arch-based and I’ve got the blackarch repo included with PacMan. Is it really that advantageous to run Kali Linux over something like my setup which is specifically a Black Arch spin of Garuda Linux, or rather do I put myself at a disadvantage by using this setup over simply running Kali? I’m somewhat attached to Garuda Linux since it’s the first distro that I liked enough to call a home after distro hopping every few months from the point that I first installed Linux as my OS until finding Garuda. That was only a few months after it’s inception, well before it was even in the top 100 (or 300 for that matter) on Distrowatch and I haven’t looked in at least the last few months but last I checked it was at number 7 on DW. That said, I’ve also come to learn that any distro can be fine-tuned to cater to one’s preferences. Even if it doesn’t come with your desktop environment of choice. Out of the box where there’s a will, there’s generally a way with Linux and I find that generally speaking, in simplified terms that’s an adequate summary of the hacking mindset on the whole

I spent nearly an hour replying to you and your eagle eye and it kept getting wiped before I sent it, I too am interested in the perhaps sanitised version of the description of the T9UH

Best USB-C Wi-Fi Adapters

It’s natural to wonder why you would want a USB-C Wi-Fi adapter. Modern computers come fully loaded with all essential features, including Wi-Fi and Bluetooth cards. Gone are the days when one considered wireless connectivity (on computers) a luxury. Over the years, Wi-Fi connectivity has become necessary for everyone, whether you use it for work, learning, or entertainment.

It’s such an essential component that all modern laptops, mobile phones, Smart home devices, and most motherboards are incomplete without it. Although the popularity of USB-C pales compared to that of Wi-Fi, USB-C is relatively new, and its popularity will see an exponential rise in the coming years.

Because it’s newer, it is fair to assume that if your computer has a USB-C port, it already has a Wi-Fi card. So, why would you need a USB-C Wi-Fi adapter?

Better Signal Reception

Wi-Fi adapters use external antennae for excellent signal reception. These large-size antennae offer unhindered signal reception, vital for a reliable and stable wireless connection.

Typically, laptops conceal the Wi-Fi antennae within the display screen’s frame. While it’s suitable for the laptop’s overall design, it compromises the signal reception because these are much smaller antennae whose performance significantly affects the radio noise of adjacent components.

An external antennae array ensures excellent Wi-Fi reception even in a “dead zone” in your home or office.

Upgraded Wi-Fi Standards

A Wi-Fi adapter is the most economical and convenient way to upgrade your Wi-Fi 5 (or earlier) computer to a Wi-Fi 6/6E. You’ll have to forego a USB-C port on your computer, but it’s a small price to pay for the significant bandwidth gains you’ll get from using a Wi-Fi 6/6E network.

If you are a novice user who feels uncomfortable tinkering with your computer to install an M.2 Wi-Fi 6E card, a plug-and-play USB-C Wi-Fi adapter is perfect.

Faster Data Transfer Speed

A USB-C Wi-Fi adapter can deliver speeds up to 20Gbps depending on the native USB version it uses. But before you hit the “BUY” button, we must inform you that network speeds depend on several factors. These include the data plan, the distance between the router and the receiver, and whether there are any physical obstructions between the two.

In most cases, a USB-C Wi-Fi adapter will deliver faster network speeds than USB-A Wi-Fi adapters. But it’s advisable to check the native USB version the adapter uses and your ISP’s data plan.

No USB-A Ports

While USB-A still holds the lion’s share of I/O connectivity standards, you could be using an Ultrabook that only has USB-C ports. Thus, you may be forced to use a USB-C Wi-Fi adapter to improve Wi-Fi reception or upgrade to a newer Wi-Fi standard.

USB Wi-Fi adapters are the best and most convenient way to tackle these issues. They are plug-and-play devices that require minimal technical knowledge, making them super easy to use. over, they offer a.friendly solution as most adapters cost less than a hundred dollars.

Table of Contents

Comparison of the Best USB-C Wi-Fi Adapters

ImageProductDetailsCheck Price

ALFA AWUS036AXML – Our Choice

The Alfa AWUS036AXML is a Wi-Fi 6E USB-C adapter and is the only one offering the newest Wi-Fi standard, making it the easiest way to upgrade your wireless capabilities.

The triband connectivity offers a combined bandwidth of 3Gbps over the 2.4GHz, 5GHz, and 6GHz frequencies, giving you a low-latency, high-speed wireless network. Thus, the AWUS036AXML from Alfa is perfect for high-performance gaming because you’re assured faster responses that result in precise controls.

The Alfa AWUS036AXML is the only proper USB-C device. While it has a USB-C connector on the device and comes with a USB-C cable, it is the only device on the market that uses USB-C end-to-end. Using USB-C natively ensures you get stable data transfers on a Wi-Fi connection without reliability issues.

The device’s most significant advantage is its dual 5dBi antenna array, which helps provide better signal reception than your laptop’s built-in network card. Alfa includes a 36-inch USB-C cable to aid signal reception, allowing you to place the antennae at a suitable height for better signal reception.

However, Alfa realizes that you may like to use the device while on the move, and placing the antennae 36 inches away may not always be feasible. So, it incorporates a screen clip into the design that allows you to clip the device on the top edge of your laptop’s lid.

Overall, the device’s design is bulky compared to similar products on the market. Nevertheless, the combination of USB-C and Wi-Fi 6E makes the Alfa AWUS036AXML the best USB-C Wi-Fi Adapter.

  • Wi-Fi 6E compatibility provides the best wireless connectivity.
  • The native USB-C support provides reliable data transfers.
  • The 5dBi antennae provide significantly better signal reception.
  • The 36-inch USB-C cable lets you place the device higher for improved reception.
  • It supports WEP, WPA, WPA2, and WPA3 to secure wireless communications.
  • Bulky design to use with a laptop or Ultrabook.
  • Newer USB versions may support better wireless bandwidth.

Plugable USB Wi-Fi Adapter – Wi-Fi 6

8bitdo, wireless, adapter, wi-fi

The Plugable USB Wi-Fi adapter offers Wi-Fi 6 connectivity, allowing you to connect to Wi-Fi networks that use the 2.4GHz and 5GHz frequencies. It is a cost-effective device if you want an intermediate upgrade for your Wi-Fi connectivity, as a stop-gap measure, before investing in a total overhaul.

But you must be informed that this isn’t a USB-C device strictly. Instead of USB-C, it uses USB-A and includes an adapter to connect it to your computer’s USB-C port. Like the device from Alfa, the Plugable USB Wi-Fi Adapter also use USB 3.0 natively.

In its most basic form, the device uses a USB-A connector which you can plug into your computer’s USB-A port. For USB-C, the primary device plugs into a base unit that has a USB-A wire which connects to a USB-C adapter.

The adapter uses dual 3dBI antennae for higher gain and better signal reception. It’s an omnidirectional antenna that facilitates the core features of Wi-Fi 6 to provide a stable network connection. Not only do you get faster wireless connections, but the connections are reliable and ensure lower latency for high-performance gaming.

The device supports a maximum bandwidth of 1200Mbps and supports WPA3 to ensure you get top-of-the-line wireless security.

For your convenience, Plugable includes a 45-inch data cable, allowing you to position the device to get better signal reception. Finally, like the Alfa, this adapter from Plugable also incorporates a clip in its design, making it super convenient to use when you are on the move.

  • Price
  • It supports fast network speed with Wi-Fi 6 networks.
  • Its low latency signals make it perfect for high-performance gaming.
  • The excellent build quality makes the device durable.
  • It provides enhanced security with WPA3.
  • Two years warranty

Best USB-C Wi-Fi Adapters – Frequently Asked Questions (FAQs)

Can I use a USB-C Wi-Fi Adapter for gaming?

In terms of functionality, a USB-C Wi-Fi adapter is no different from any other Wi-Fi card. Thus, you can accomplish all your online tasks, including (and not limited to) gaming, streaming content, and whatnot.

Do USB-C Wi-Fi Adapters also include Bluetooth connectivity?

Unfortunately, there are no USB-C Wi-Fi adapters that include Bluetooth. So, you’ll have to buy a separate Bluetooth dongle if you want the latest Bluetooth connectivity standards.

How does a USB-C Wi-Fi adapter help in getting better signal reception?

USB-C Wi-Fi Adapters use high-gain external antennae, which enable significant signal quality. Desktop motherboards with Wi-Fi include high-gain antennas that give your computer excellent signal strength. However, laptops don’t use these antennas, and using a USB Wi-Fi adapter can significantly enhance reception to provide stable wireless network connections.

Can I use a USB-C Wi-Fi adapter while on the move?

These adapters have versatile applications. USB Wi-Fi adapters have a clip that allows you to conveniently attach the device to your laptop while away from your workstation. As a result, the adapter becomes an insignificant extension of your computer, and you can continue working unhindered even while working remotely.

Also, the adapters are compact, and their lightweight design doesn’t add weight to your laptop bag.

What specifications should I consider when buying a USB-C Wi-Fi adapter?

There are essentially two vital considerations to make:

Firstly, you must decide whether you need an adapter that supports Wi-Fi 6 or Wi-Fi 6E. Wi-Fi 6E is the latest Wi-Fi standard, and because it’s backward compatible with all previous versions, choosing an adapter that supports this standard ensures versatile connectivity. However, they are expensive compared to adapters that support Wi-Fi 6.

Next, you must consider the maximum bandwidth that the adapter supports. The bandwidth is dependent on several factors, as we mentioned earlier. But glancing through the adapter’s specifications will help you determine a suitable device to match your need.

Plugable USB 3.0 Wi-Fi 6 AX1800 Wireless Adapter

It doesn’t matter if you need a Wi-Fi adapter for a PC you’re building, or you just want to upgrade to the latest Wi-Fi standard on your laptop for a jump in performance, the Plugable USB-WIFIAX is your simple solution for upgrading to Wi-Fi 6. And with more of our work being done online, upgrading with a USB Wi-Fi 6 adapter is a cost-effective way to extend the life of a computer.

Get speeds up 1,201Mbps when you connect to a 5GHz network, and 573.5Mbps on a 2.4GHz network. Connect directly to your computer through USB, or USB-C. If interference is an issue, an included 45-inch (115 cm) extension cable lets you move your adapter to find the strongest signal. It even folds flat so you can take it with you.

The first thing you’ll notice when upgrading to Wi-Fi 6 with this wireless adapter for desktop computer is speed—and a lot of it.

When connected to a 5GHz network, work, play, and stream to your heart’s content with speeds up to 1,201Mbps. And should you find yourself connecting to a 2.4GHz network, you’ll still be humming along with up to 573.5Mbps.

Upgrading to Wi-Fi 6 with this Plugable Wi-Fi 6 adapter isn’t just about speed.

You also get a more stable connection over Wi-Fi 5 protocols.

With the included 45-inch (115 cm) extension cable, you can elevate the Wi-Fi USB adapter for a better signal.

The Wi-Fi 6 USB adapter folds flat so you can get connected on the go.

Plus, it looks pretty cool, something you don’t usually expect from a Wi-Fi adapter.

The USB-WIFIAX is a USB network adapter compatible with Windows 10 and newer. It is not compatible with macOS or Linux.

Connect to host through USB 3.0 or USB-C (USB-A to USB-C adapter included).

As is the case with any wireless technology, your actual speed will depend on environmental factors, your host system, and your access point (router).

Driver download is required.

Supported Features

MIMO1024-QAM45 in (115 cm) Extension Cable

In The Box

Item and Quantity Item Notes
1x USB Wi-Fi Adapter
1x USB-A 3.0 Cradle
1x USB A-to-C Adapter
1x Quick Start Guide


Port Placement Power Host / Device Connection Type Notes Voltage Amperage Wattage
USB-A to Host Bottom Device Bus Powered (No Power Adapter) 5.0V 480mA 2.4W

Wireless Network

Port Type Port Specification Supported Channel Width Antenna Design Features Chipset
USB-A USB 3.0 (5Gbps) 80 MHz (1201Mbps) 2×2 (5.0 GHz and 2.4GHz) WPS Realtek RTL8832BU

Before configuring the Plugable Wi-Fi 6 adapter please download the drivers

Getting Started on Windows

Follow the steps below to install the Wi-Fi 6 adapter on your Windows PC.

Please be sure to extract the contents of the.zip file. Running the setup.exe without completing this step will result in the driver not installing.

Please be sure to extract the contents of the.zip file prior to running the setup.exe.

Setup.exe requires administrator privileges.

If you are having trouble installing the adapter with this installer, please contact support.


Well how about that, it looks like we don’t have any articles matching your filters! Try removing one of your choices or clear the filters to show all articles.

You can always contact support if you need help too!

How to install the drivers for Plugable USB-WIFIAX Wi-Fi 6 adapter

How to install the drivers for the USB-WIFIAX:

Download the following drivers here.

Connect the USB-WIFIAX to your computer

Extract the compressed folder, you can Right Click then select the “Extract All. ” option

Next we will want to navigate to the Device Manager application and expand the Other devices section. To open the Device Manager application you can simply type this in to the Windows Search Bar

Right Click the “802.11ax WLAN adapter” and select “Update Driver”

Select “Browse my computer for drivers” then navigate and select the folder that we de-compressed in Step #3

Windows will then proceed to install the drivers and prompt you to restart your PC, go ahead and restart the computer and you should see the ability to connect to a wireless network upon reboot.

Understanding and Troubleshooting Network Performance

Computer networking is a complex topic. In this article, we’ll be taking a deep dive on the nuances of network performance for those who need some additional explanation while striving to be concise, and to educate users of various experience levels relating computer hardware and computer networking.

If you just need to know how to perform a network performance test/benchmark, jump down to configuring iPerf.


With regards to network performance, it is crucial to first separate whether an issue is with Wide Area Network (WAN) performance, or if the issue is with Local Area Network (LAN) performance.

Your LAN is essentially the network inside your home or business. Many homes use a combination modem/router device provided by their Internet Service Provider (ISP). In some cases, especially in businesses, you may have a separate modem and router, along with other equipment connecting to the router such as a network switch.

Your modem, and the connection it establishes to your ISP—whether through coaxial cable, fiber, phone lines, or long-range wireless—essentially marks the point between the WAN and the LAN. The connection your modem makes to your ISP is the WAN, and any devices you connect through your router behind that modem belong to the LAN.

Link Rate

Almost every type of connection your computer makes to any piece of hardware will have a link rate of some kind. The link rate establishes how fast data can possibly be transferred across any given connection, but it does not guarantee how fast the hardware on either end of the connection will actually transfer data.

The concept of link rates, and their related bottlenecks, is likely best conveyed by giving an example of what connections might be involved in transferring a file from one computer on your LAN to another.

  • 800Mbps—The file source is a USB 3.0 thumb drive capable of 100MB/s (800Mbps) read/write.
  • 480Mbps—The USB 3.0 thumb drive is plugged into a USB 2.0 port on the PC, which has a maximum throughput of 480Mbps
  • 1000Mbps—PC1’s Ethernet connection establishes 1Gbps (1000Mbps) link to the router via Ethernet
  • 300Mbps—The router connects to a second PC (we’ll refer to this as PC2) via Wi-Fi, and it has established a 300Mbps link to the Wi-Fi adapter on PC2
  • 480Mbps—The Wi-Fi adapter on PC2 is connected via a USB 2.0 port. The link rate of the USB connection to PC2 is at 480Mbps
  • 6000Mbps—PC2 is going to store the file on an internal hard drive with a link rate of 6Gbps
  • 1600Mbps—File Destination: SATA hard drive capable of 200MB/s (1600Mbps) read/write.

Following this chain, we see that 300Mbps is the slowest link rate established. This means that, regardless of the link rates established elsewhere, the absolute maximum the data can possibly be transferred is 300Mbps.

if we were to change the Wi-Fi connection to a wired Ethernet connection capable of 1Gbps, our performance bottleneck would then become the USB 2.0 connection to the USB drive where the file is stored.

Ports and Interfaces

A network interface represents connections, whether wired or wireless, that are made to form a network between devices.

Some may refer to physical hardware connections as “ports”. For the purposes of networking, ports are logical constructs that can also be referred to as “network ports”. Each network interface has 65,535 of these logical ports. Each port on a network interface is a separate data connection.

Benchmarking Network Adapter Performance

To properly benchmark network adapter performance, we need to:

  • Use a simple LAN configuration
  • Eliminate bottlenecks, especially link rate bottlenecks

Websites like speedtest.net, fast.com, and other performance tools in your web browser are going to use your WAN connection, and are not appropriate for determining if a network adapter is working well.

Transferring files from one computer to another on your LAN is typically not the best way to benchmark a network adapter. File transfers are bottlenecked by a number of things, including performance limitations of the disk the data is on, and often times a lack of establishing parallel network connections to perform the task.

One of the most accurate ways to benchmark network performance on a LAN is by using iPerf. To more effectively benchmark network adapter performance, it is best to establish a point-to-point connection between two PCs, rather than connecting through a router or switch.

Configuring iPerf

To test a connection using iPerf, you’ll need at least two network interfaces, and preferably two computers. You’ll also need to know the IP (Internet Protocol) address assigned to each network interface. One network interface will function as an iPerf server, and the other network interface will function as an iPerf client. Lastly, you’ll need to download the version of iPerf 3.x that’s appropriate for your computer’s operating system and extract/install it.

  • Make sure the drivers for both network interfaces involved in the test are using up-to-date drivers. Drivers for Plugable products can be found here.
  • Download and extract iPerf for Windows
  • Open Command Prompt
  • Press Windows Key R or R. then enter cmd in the window that appears
  • Search the Start Menu for Command Prompt. and open it
  • The cd command is for ‘change directory’
  • If you have a folder named ‘iperf’ on your Windows desktop, you can reach it in command prompt with the command cd %USERPROFILE%\Desktop\iperf
  • iperf3.exe.s
  • Usually it is best to install iperf on macOS using brew in Terminal
  • Make sure the drivers for both network interfaces involved in the test are using up-to-date drivers
  • Drivers for Plugable products can be found here
  • iperf3.s
  • Usually it is best to install iperf using the package manager in your Linux distro. For example, in Ubuntu, use apt :
  • sudo apt install iperf3
  • Drivers for Plugable products can be found here
  • iperf3.s

Next, you’ll need to run iPerf in client mode, targeting the IP address of the server/interface where iPerf is running in server mode. Additionally, we’ll run the test for 30 seconds using.t 30 and with four parallel connections using.P 4. Running 4 parallel connections is optimal for saturating a network link.

  • Open Command Prompt
  • Press Windows Key R or R. then enter cmd in the window that appears
  • Search the Start Menu for Command Prompt. and open it
  • The cd command is for ‘change directory’
  • If you have a folder named ‘iperf’ on your Windows desktop, you can reach it in command prompt with the command cd %USERPROFILE%\Desktop\iperf
  • iperf3.exe.c 30.P 4

macOS / Linux

  • Open Terminal
  • Run iPerf in client mode (replace with the IP address of the server/interface where iPerf is running in server mode)
  • iperf3.c 30.P 4

iPerf should start performing a network performance test. If the test fails to start, make sure that iPerf is not being blocked by your PC’s/Mac’s firewall.

Why iPerf is Ideal for Benchmarking

Unlike a file transfer, iPerf runs in memory on the PC and generates data to send using the CPU directly. This alleviates potential bottlenecks generated by storage devices, and allows you to explicitly control how many parallel connections are being used to transfer data rather than being unsure if parallel network connections are being used by other means.


There’s a lot more to networking that isn’t covered in this article, but we hope this helps explain enough to get an accurate measure of your network performance.

If you need assistance with your Plugable product that features network connectivity, please contact us for further assistance.



| Denial of responsibility | Contacts |RSS